Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Gaseous Surrogate Hydrocarbons for a Hifire Scramjet that Mimic Opposed Jet Extinction Limits for Cracked JP Fuels

This paper describes, first, the top-down methodology used to define simple gaseous surrogate hydrocarbon (HC) fuel mixtures for a hypersonic scramjet combustion subtask of the HiFIRE program. It then presents new and updated Opposed Jet Burner (OJB) extinction-limit Flame Strength (FS) data obtained from laminar non-premixed HC vs. air counterflow diffusion flames at 1-atm, which follow from earlier investigations. FS represents a strain-induced extinction limit based on cross-section-average air jet velocity, U(sub air), that sustains combustion of a counter jet of gaseous fuel just before extinction. FS uniquely characterizes a kinetically limited fuel combustion rate. More generally, Applied Stress Rates (ASRs) at extinction (U(sub air) normalized by nozzle or tube diameter, D(sub n or t) can directly be compared with extinction limits determined numerically using either a 1-D or (preferably) a 2-D Navier Stokes simulation with detailed transport and finite rate chemistry. The FS results help to characterize and define three candidate surrogate HC fuel mixtures that exhibit a common FS 70% greater than for vaporized JP-7 fuel. These include a binary fuel mixture of 64% ethylene + 36% methane, which is our primary recommendation. It is intended to mimic the critical flameholding limit of a thermally- or catalytically-cracked JP-7 like fuel in HiFIRE scramjet combustion tests. Our supporting experimental results include: (1) An idealized kinetically-limited ASR reactivity scale, which represents maximum strength non-premixed flames for several gaseous and vaporized liquid HCs; (2) FS characterizations of Colket and Spadaccini s suggested ternary surrogate, of 60% ethylene + 30% methane + 10% n-heptane, which matches the ignition delay of a typical cracked JP fuel; (3) Data showing how our recommended binary surrogate, of 64% ethylene + 36% methane, has an identical FS; (4) Data that characterize an alternate surrogate of 44% ethylene + 56% ethane with identical FS and nearly equal molecular weights; this could be useful when systematically varying the fuel composition. However, the mixture liquefies at much lower pressure, which limits on-board storage of gaseous fuel; (5) Dynamic Flame Weakening results that show how oscillations in OJB input flow (and composition) can weaken (extinguish) surrogate flames up to 200 Hz, but the weakening is 2.5x smaller compared to pure methane; and finally, (6) FS limits at 1-atm that compare with three published 1-D numerical OJB extinction results using four chemical kinetic models. The methane kinetics generally agree closely at 1-atm, whereas, the various ethylene models predict extinction limits that average ~ 45% high, which represents a significant problem for numerical simulation of surrogate-based flameholding in a scramjet cavity. Finally, we continue advocating the FS approach as more direct and fundamental for assessing idealized scramjet flameholding potentials than measurements of "unstrained" premixed laminar burning velocity or blowout in a Perfectly Stirred Reactor.

Pellett, Gerald L.↗
NASA NTRS2004

Annual Research Briefs, 2004: Center for Turbulence Research

This report contains the 2004 annual progress reports of the Research Fellows and students of the Center for Turbulence Research in its eighteenth year of operation. Since its inception in 1987, the objective of the CTR has been to advance the physical understanding of turbulent flows and development of physics based predictive tools for engineering analysis and turbulence control. Turbulence is ubiquitous in nature and in engineering devices. The studies at CTR have been motivated by applications where turbulence effects are significant; these include a broad range of technical areas such as planetary boundary layers, formation of planets, solar convection, magnetohydrodynamics, environmental and eco systems, aerodynamic noise, propulsion systems and high speed transportation. Numerical simulation has been the predominant research tool at CTR which has required a critical mass of researchers in numerical analysis and computer science in addition to core disciplines such as applied mathematics, chemical kinetics and fluid mechanics. Maintaining and promoting this interdisciplinary culture has been a hallmark of CTR and has been responsible for the realization of the results of its basic research in applications. The first group of reports in this volume are directed towards development, analysis and application of novel numerical methods for ow simulations. Development of methods for large eddy simulation of complex flows has been a central theme in this group. The second group is concerned with turbulent combustion, scalar transport and multi-phase ows. The nal group is devoted to geophysical turbulence where the problem of solar convection has been a new focus of considerable attention recently at CTR.

Moin, Parviz↗
DOE OSTI2022

Evaluation of Turbulence and Dispersion in Multiscale Atmospheric Simulations over Complex Urban Terrain during the Joint Urban 2003 Field Campaign

Abstract This paper evaluates the representation of turbulence and its effect on transport and dispersion within multiscale and microscale-only simulations in an urban environment. These simulations, run using the Weather Research and Forecasting Model with the addition of an immersed boundary method, predict transport and mixing during a controlled tracer release from the Joint Urban 2003 field campaign in Oklahoma City, Oklahoma. This work extends the results of a recent study through analysis of turbulence kinetic energy and turbulence spectra and their role in accurately simulating wind speed, direction, and tracer concentration. The significance and role of surface heat fluxes and use of the cell perturbation method in the numerical simulation setup are also examined. Our previous study detailed the model development necessary for our multiscale simulations, examined model skill at predicting wind speeds and tracer concentrations, and demonstrated that dynamic downscaling from mesoscale to microscale through a sequence of nested simulations can improve predictions of transport and dispersion relative to a microscale-only simulation forced by idealized meteorology. Here, predictions are compared with observations to assess qualitative agreement and statistical model skill at predicting wind speed, wind direction, tracer concentration, and turbulent kinetic energy at locations throughout the city. We also investigate the scale distribution of turbulence and the associated impact on model skill, particularly for predictions of transport and dispersion. Our results show that downscaled large-scale turbulence, which is unique to the multiscale simulations, significantly improves predictions of tracer concentrations in this complex urban environment. Significance Statement Simulations of atmospheric transport and mixing in urban environments have many applications, including pollution modeling for urban planning or informing emergency response following a hazardous release. These applications include phenomena with spatial scales spanning from millimeters to kilometers. Most simulations resolve flow only within the urban area of interest, omitting larger scales of turbulence and regional influences. This study examines a method that resolves both the small and large-scale flow features. We evaluate simulation accuracy by comparing predictions with observations from an experiment involving the release of a tracer gas in Oklahoma City, Oklahoma, with emphasis on correctly modeling turbulent fluctuations. Our results demonstrate the importance of resolving large-scale flow features when predicting transport and dispersion in urban environments.

42 ENGINEERING↗
NASA NTRSDate not supplied

Simulating Microwave and Radar Signals in Severe Weather Conditions

The development of radiative transfer simulators for radar and microwave signals, spanning a range of frequencies from 10 to 800 GHz, is paramount for enhancing weather forecasting accuracy, particularly for severe weather events. These tools facilitate the assimilation of microwave and radar observations into numerical weather prediction models, thereby improving accuracy of weather forecasts. Additionally, they directly simulate radar signals crucial for autonomous vehicle operation, with frequencies commonly used in radar systems such as 24, 74, 77, and 79 GHz. However, these frequencies are susceptible to weather phenomena like severe rain and snow, which can significantly impact vehicle safety and performance. These simulation tools, including radiative transfer simulators, serve a dual purpose. Firstly, they enhance forecasts for severe weather events, contributing to autonomous vehicle safety by providing early warnings and risk assessments. Secondly, they enable the direct simulation of radar signals in autonomous vehicle driving systems, allowing researchers and engineers to evaluate radar system performance under various weather conditions. In addition to the radar signal simulator, this abstract discusses the incorporation of advanced scattering properties developed using the discrete dipole approximation (DDA). The DDA technique enhances scattering calculations for frozen hydrometeors at microwave frequencies, thereby improving the accuracy of radar signal simulations and enabling more accurate assessments of radar system performance in adverse weather conditions. In summary, this abstract explores the development and utilization of comprehensive simulation tools, emphasizing their significance in simulating microwave and radar signals and improving weather forecasts. Special attention is given to the simulation of radar signals at critical frequencies for autonomous vehicle sensing and navigation, addressing challenges posed by severe weather phenomena and their effects on signal propagation and detection

Isaac Moradi↗
DOE OSTI2021

Effect of ionization waves on dust chain formation in a DC discharge

An interesting aspect of complex plasma is its ability to self-organize into a variety of structural configurations and undergo transitions between these states. A striking phenomenon is the isotropic-to-string transition observed in electrorheological complex plasma under the influence of a symmetric ion wake field. Such transitions have been investigated using the Plasma Kristall-4 (PK-4) microgravity laboratory on the International Space Station. Recent experiments and numerical simulations have shown that, under PK-4-relevant discharge conditions, the seemingly homogeneous direct current discharge column is highly inhomogeneous, with large axial electric field oscillations associated with ionization waves occurring on microsecond time scales. here, a multi-scale numerical model of the dust–plasma interactions is employed to investigate the role of the electric field in the charge of individual dust grains, the ion wake field and the order of string-like structures. Results are compared with those for dust strings formed in similar conditions in the PK-4 experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

A line-of-sight performance criterion for controller design of a proposed laboratory model

A line-of-sight performance criterion is derived for a proposed Controls Structures Interaction model, and its many uses in the control design process for fine pointing control are illustrated. A linearized line-of-sight (LOS) criterion is used for direct controller design and as a performance measure to judge different control methodologies. Numerical simulation results are shown where the three approaches: linear quadratic Gaussian theory, robust eigensystem assignment, and local velocity feedback are used for vibration control. Results indicate that the linear quadratic Gaussian controller, which incorporates a linearized LOS weighting matrix directly, yields good performance without wasting energy to control motions that have no influence on the LOS.

Lim, Kyong B.↗
DOE OSTI2026

Existence of a robust optimal control process for efficient measurements in a two-qubit system

The verification of quantum entanglement is essential for quality control in quantum communication. In this work we propose an efficient protocol to directly verify the two-qubit entanglement of a known target state through a single-expectation-value measurement. Our method provides exact entanglement quantification using the concurrence measure without performing quantum state tomography. We prove the existence of a unitary transformation that drives a known initial state of a two-qubit system to a designated final state, where the trace over a chosen observable directly yields the concurrence of the initial state. Furthermore, we implement an optimal control process of that transformation and demonstrate its effectiveness through numerical simulations. We also show that this process is robust to environmental noise. Our approach offers advantages in directly verifying entanglement with low circuit depth, making it suitable for industrial-scale quality control of entanglement generation. Our results presented here provide mathematical justification for our earlier computational experiments.

Rodriguez, Ricardo [McPherson Coll.] (ORCID:000000↗
NASA NTRS1983

Numerical Simulation of Turbulent Fluid Flows

Numerical simulation of turbulent flows is discussed. Computational requirements for the direct simulaton of turbulence, simulation of arbitrary homogeneous flows, an expansion technique for wall bounded flows with application to pipe flow, and possibilities of flow representations or modeling techniques that allow the simulation of high Reynolds number flows with a relatively small number of dependent variables are included.

Leonard, A.↗
NASA NTRS1986

Convective forcing of global circulations on the Jovian planets

Examples of convection in rotating layers are presented to illustrate how convection can drive global circulations on the Jovian planets. For rapid rotation the convective motions become largely two-dimensional and produce Reynold stresses which drive large scale flows. The initial tendency is to produce a prograde equatorial jet and a meridional circulation which is directed toward the poles in the surface layers. Fully nonlinear numerical simulations for the slowly rotating solar convection zone show that the meridional circulation does not reach the poles. Instead a multicellular meridional circulation is produced which has a downward flowing branch in the mid-latitudes. For more rapidly rotating objects such as Jupiter and Saturn this meridional circulation may consist of a larger number of cells. Axisymmetric convective models then show that prograde jets form at the downflow latitudes. A nonlinear numerical simulation of convection in a prograde jet is presented to illustrate the interactions which occur between convection and these jets. Without rotation the convection removes energy and momentum from the jet. With rotation the convection feeds energy and momentum into the jet.

Hathaway, David H.↗
NASA NTRS1990

Neutral beams in two-ribbon flares and in the geomagnetic tail

The current sheet created in the wake of an erupting filament during a two-ribbon flare is studied. A comparison with the geomagnetic tail shows that the physics of these systems is very similar, and therefore the existence of super Dreicer fields and the generation of netural beams traveling down the postflare loops with small pitch angles may be expected. The observational evidence for neutral beams in flares is reviewed and found to be generally supportive, while contracting the widely held hypothesis of electron beams. A dimensional analysis further demonstrates that the results for self-consistent numerical simulations of the current sheet in the geomagnetic tail can directly be scaled to the coronal current sheet, and the scaling parameters are derived.

Martens, P. C. H.↗
NASA NTRS1997

Aerodynamics of Stardust Sample Return Capsule

Successful return of interstellar dust and cometary material by the Stardust Sample Return Capsule requires an accurate description of the Earth entry vehicle's aerodynamics. This description must span the hypersonic-rarefied, hypersonic-continuum, supersonic, transonic, and subsonic flow regimes. Data from numerous sources are compiled to accomplish this objective. These include Direct Simulation Monte Carlo analyses, thermochemical nonequilibrium computational fluid dynamics, transonic computational fluid dynamics, existing wind tunnel data, and new wind tunnel data. Four observations are highlighted: 1) a static instability is revealed in the free-molecular and early transitional-flow regime due to aft location of the vehicle s center-of-gravity, 2) the aerodynamics across the hypersonic regime are compared with the Newtonian flow approximation and a correlation between the accuracy of the Newtonian flow assumption and the sonic line position is noted, 3) the primary effect of shape change due to ablation is shown to be a reduction in drag, and 4) a subsonic dynamic instability is revealed which will necessitate either a change in the vehicle s center-of-gravity location or the use of a stabilizing drogue parachute.

Mitcheltree, R. A.↗
NASA NTRS2007

Opposed Jet Burner Extinction Limits: Simple Mixed Hydrocarbon Scramjet Fuels vs Air

Opposed Jet Burner tools have been used extensively by the authors to measure Flame Strength (FS) of laminar non-premixed H2 air and simple hydrocarbon (HC) air counterflow diffusion flames at 1-atm. FS represents a strain-induced extinction limit based on air jet velocity. This paper follows AIAA-2006-5223, and provides new HC air FSs for global testing of chemical kinetics, and for characterizing idealized flameholding potentials during early scramjet-like combustion. Previous FS data included six HCs, pure and N2-diluted; and three HC-diluted H2 fuels, where FS decayed very nonlinearly as HC was added to H2, due to H-atom scavenging. This study presents FSs on mixtures of (candidate surrogate) HCs, some with very high FS ethylene. Included are four binary gaseous systems at 300 K, and a hot ternary system at approx. 600 K. The binaries are methane + ethylene, ethane + ethylene, methane + ethane, and methane + propylene. The first three also form two ternary systems. The hot ternary includes both 10.8 and 21.3 mole % vaporized n-heptane and full ranges of methane + ethylene. Normalized FS data provide accurate means of (1) validating, globally, chemical kinetics for extinction of non-premixed flames, and (2) estimating (scaling by HC) the loss of incipient flameholding in scramjet combustors. The n-heptane is part of a proposed baseline simulant (10 mole % with 30% methane + 60% ethylene) that mimics the ignition of endothermically cracked JP-7 like kerosene fuel, as suggested by Colket and Spadaccini in 2001 in their shock tube Scramjet Fuels Autoignition Study. Presently, we use FS to gauge idealized flameholding, and define HC surrogates. First, FS was characterized for hot nheptane + methane + ethylene; then a hot 36 mole % methane + 64% ethylene surrogate was defined that mimics FS of the baseline simulant system. A similar hot ethane + ethylene surrogate can also be defined, but it has lower vapor pressure at 300 K, and thus exhibits reduced gaseous capacity. The new FS results refine our earlier idealized reactivity scale that shows wide ranging (50 x) diameter-normalized FSs for various HCs. These range from JP-10 and methane to H2 air, which produces an exceptionally strong flame that agrees within approx. 1% of recent 2-D numerically simulations. Finally, we continue advocating the FS approach as more direct and fundamental, for assessing idealized scramjet flameholding potentials, than measurements of unstrained laminar burning velocity or blowout in a Perfectly Stirred Reactor.

Pellett, Gerald L.↗
NASA NTRS2011

Climate Change, Extreme Weather Events, and Fungal Disease Emergence and Spread

Empirical evidence from multiple sources show the Earth has been warming since the late 19th century. More recently, evidence for this warming trend is strongly supported by satellite data since the late 1970s from the cryosphere, atmosphere, oceans, and land that confirms increasing temperature trends and their consequences (e.g., reduced Arctic sea ice, rising sea level, ice sheet mass loss, etc.). At the same time, satellite observations of the Sun show remarkably stable solar cycles since the late 1970s, when direct observations of the Sun's total solar irradiance began. Numerical simulation models, driven in part by assimilated satellite data, suggest that future-warming trends will lead to not only a warmer planet, but also a wetter and drier climate depending upon location in a fashion consistent with large-scale atmospheric processes. Continued global warming poses new opportunities for the emergence and spread of fungal disease, as climate systems change at regional and global scales, and as animal and plant species move into new niches. Our contribution to this proceedings is organized thus: First, we review empirical evidence for a warming Earth. Second, we show the Sun is not responsible for the observed warming. Third, we review numerical simulation modeling results that project these trends into the future, describing the projected abiotic environment of our planet in the next 40 to 50 years. Fourth, we illustrate how Rift Valley fever outbreaks have been linked to climate, enabling a better understanding of the dynamics of these diseases, and how this has led to the development of an operational predictive outbreak model for this disease in Africa. Fifth, We project how this experience may be applicable to predicting outbreaks of fungal pathogens in a warming world. Lastly, we describe an example of changing species ranges due to climate change, resulting from recent warming in the Andes and associated glacier melt that has enabled amphibians to colonize higher elevation lakes, only to be followed shortly by the emergence of fungal disease in the new habitats.

Tucker, Compton J.↗
NASA NTRSDate not supplied

Towards Physics Guided Optical Flow for Tracking Atmospheric Motion

Atmospheric 3D winds in the horizontal and vertical directions are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we use a state-of-the-art convolutional neural network for optical flow (FlowNetS) in a physics-guided deep learning framework for predicting AMVs in the horizontal direction. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations (DYAMOND) for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.

geostationary↗
NASA NTRS2009

A Very Large Eddy Simulation of the Nonreacting Flow in a Single-Element Lean Direct Injection Combustor Using PRNS with a Nonlinear Subscale Model

Very large eddy simulation (VLES) of the nonreacting turbulent flow in a single-element lean direct injection (LDI) combustor has been successfully performed via the approach known as the partially resolved numerical simulation (PRNS/VLES) using a nonlinear subscale model. The grid is the same as the one used in a previous RANS simulation, which was considered as too coarse for a traditional LES simulation. In this study, we first carry out a steady RANS simulation to provide the initial flow field for the subsequent PRNS/VLES simulation. We have also carried out an unsteady RANS (URANS) simulation for the purpose of comparing its results with that of the PRNS/VLES simulation. In addition, these calculated results are compared with the experimental data. The present effort has demonstrated that the PRNS/VLES approach, while using a RANS type of grid, is able to reveal the dynamically important, unsteady large-scale turbulent structures occurring in the flow field of a single-element LDI combustor. The interactions of these coherent structures play a critical role in the dispersion of the fuel, hence, the mixing between the fuel and the oxidizer in a combustor.

Shih, Tsan-Hsing↗
DOE OSTI2023

Modeling the interfacial failure and resulting mechanical properties of z-pinned additively manufactured composites

The mechanical properties of Fused Filament Fabrication (FFF) parts are limited in the build direction, albeit advantages such as design flexibility and in-house customization. Here, in this paper, a novel z-pinning approach that enhances mechanical properties in the build direction by depositing material across multiple layers within the part was investigated through numerical simulations and validated experimentally. A finite element model for z-pinned composite structures was developed by assigning fiber-orientation dependent material properties obtained using a micromechanics approach to beads and pins. The bead-to-bead and pin-to-pin adhesions within the z-pinned structures were modeled using a cohesive traction separation law. The properties of cohesive elements for carbon fiber-reinforced polylactic acid (CF-PLA) z-pinned composites were calibrated using tensile experiments. The elastic modulus and tensile strength of CF-PLA z-pinned composites in the build direction were predicted with the developed numerical model. The numerical investigation on various geometrical parameters revealed that the largest pin volume increases the stiffness and tensile strength by 40% and thus, has the greatest influence on the mechanical properties of the z-pinned composites. The effect of z-pin geometrical parameters on the mechanical properties was summarized to aid in the design of z-pinned additively manufactured composite structures.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Engine dynamic analysis with general nonlinear finite element codes. II - Bearing element implementation, overall numerical characteristics and benchmarking

Second-year efforts within a three-year study to develop and extend finite element (FE) methodology to efficiently handle the transient/steady state response of rotor-bearing-stator structure associated with gas turbine engines are outlined. The two main areas aim at (1) implanting the squeeze film damper element into a general purpose FE code for testing and evaluation; and (2) determining the numerical characteristics of the FE-generated rotor-bearing-stator simulation scheme. The governing FE field equations are set out and the solution methodology is presented. The choice of ADINA as the general-purpose FE code is explained, and the numerical operational characteristics of the direct integration approach of FE-generated rotor-bearing-stator simulations is determined, including benchmarking, comparison of explicit vs. implicit methodologies of direct integration, and demonstration problems.

Padovan, J.↗
DOE OSTI2025

Resolution requirements for numerical modeling of neutrino quantum kinetics

Neutrino quantum kinetics is a rapidly evolving field in computational astrophysics, with a primary focus on collective neutrino oscillations in core-collapse supernovae and postmerger phases of binary neutron star mergers. In recent years, there has been considerable debate concerning resolution dependence in numerical simulations. In this paper, we conduct a comprehensive resolution study in both angular- and spatial directions by using two independent schemes of quantum kinetic neutrino transport: finite volume and pseudospectral methods. We complement our discussion by linear stability analysis including inhomogeneous modes. Our result suggests that decreasing spatial resolutions underestimates the growth of flavor instability, and then leads to wrong asymptotic states of flavor conversions, which potentially has a critical impact on astrophysical consequences. We further delve into numerical results of low resolution simulations, that reveals the underlying mechanism responsible for numerical artifacts caused by insufficient resolutions. Finally, this study settles the debate on requirements of resolutions and serves as a guideline for numerical modeling of quantum kinetic neutrino transport.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗