Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Measurements

The debris population is divided into small and large regimes. NORAD is the source of data in the size range above 10 cm. For the small ( 10 cm) debris particles, satellite-borne instrumentation could be used to obtain the necessary data. These results can then be fed into models of the debris population. These measurements are designed to give some reality to the models which estimate the number of particles produced from an explosion or an impact.

Potter, A. E.↗

A high-speed digital signal processor for atmospheric radar, part 7.3A

The Model SP-320 device is a monolithic realization of a complex general purpose signal processor, incorporating such features as a 32-bit ALU, a 16-bit x 16-bit combinatorial multiplier, and a 16-bit barrel shifter. The SP-320 is designed to operate as a slave processor to a host general purpose computer in applications such as coherent integration of a radar return signal in multiple ranges, or dedicated FFT processing. Presently available is an I/O module conforming to the Intel Multichannel interface standard; other I/O modules will be designed to meet specific user requirements. The main processor board includes input and output FIFO (First In First Out) memories, both with depths of 4096 W, to permit asynchronous operation between the source of data and the host computer. This design permits burst data rates in excess of 5 MW/s.

Brosnahan, J. W.↗

Modified superposition: A simple time series approach to closed-loop manual controller identification

Single-channel pilot manual control output in closed-tracking tasks is modeled in terms of linear discrete transfer functions which are parsimonious and guaranteed stable. The transfer functions are found by applying a modified super-position time series generation technique. A Levinson-Durbin algorithm is used to determine the filter which prewhitens the input and a projective (least squares) fit of pulse response estimates is used to guarantee identified model stability. Results from two case studies are compared to previous findings, where the source of data are relatively short data records, approximately 25 seconds long. Time delay effects and pilot seasonalities are discussed and analyzed. It is concluded that single-channel time series controller modeling is feasible on short records, and that it is important for the analyst to determine a criterion for best time domain fit which allows association of model parameter values, such as pure time delay, with actual physical and physiological constraints. The purpose of the modeling is thus paramount.

Biezad, D. J.↗

Correlated observations of impulsive UV and hard X-ray bursts from the solar maximum mission

The spatially resolved UV observations and hard X-ray observations are analyzed in order to study the spatial structure and physical conditions in the UV and hard X-ray sources. The data reveal that impulsive UV emissions and hard X-ray bursts occur in small kernels. Individual light curves for Si IV and hard X-ray emissions are compared and it is detected that the individual peaks in the curves correspond. The dynamic evolution and density diagnostics of the transition zone plasmas are examined.

Cheng, C.-C.↗

Modeling the Milky Way in the infrared

The spatial distribution of stars in the Milky Way is modeled using an exponential disk with the addition of a de Vaucouleurs (1958, 1977, and 1979) R exp 1/4 spheroid. The present model is compared to 2-2.5-micron star counts and surface-brightness data and to IRAS 12-micron source counts. The data are consistent with a flattened bulge; it is maintained that a fraction of the bulge population has a considerable infrared excess.

Garwood, Robert↗

Photoabsorption and phototdissociation of molecules important in the interstellar medium

The photoabsorption and photodissociation cross sections of interstellar molecules and radicals were measured in the 90 to 200 nm region using synchrotron radiation, F sub 2 laser, excimer lasers, and discharge lamps as light sources. These data are currently needed for determining the formation and destruction rates of molecules and radicals by the interstellar radiation field.

Lee, Long C.↗

EnviroNET: An interactive space-environment information resource

EnviroNET is an interactive menu-driven system set up as an information resource for experimenters, program managers, and design and test engineers involved in space missions. Its basic use is as a fundamental single source of data for the environment encountered by Shuttle and Space Station payloads, but it also has wider applicability in that it includes information on environments encountered by other satellites in both low altitude and high altitude (including geosynchronous) orbits. It incorporates both a text-retrieval mode and an interactive modeling code mode. The system is maintained on the ENVET MicroVAX computer at NASA/Goddard Space Flight Center. Its services are available at no cost to any user who has access to a terminal and modem. It is a tail-node on SPAN, and so it is accessible either directly or through BITNET, ARPANET, and GTE/TELENET via NPSS.

Vampola, Alfred L.↗

Shuttle imaging radar A analysis of land use in Amazonia

Over large areas in the tropics, satellite imagery is the principal source of data on the area, current stature, and extent of disturbance of the forests. The information from imagery that covers large areas at low resolution is greatly enhanced when different types of imagery can be compared. The paper presents a comparison of data from Landsat MSS and from the Shuttle Imaging Radar (SIR-A) L band HH polarization data for sites in the Amazon Basin. Results indicate that SIR-A backscatter from the undisturbed forest was lower than that from some disturbed areas and from flooded forests and that SIR-A brightness, increases nonlinearly with the Landsat normalized difference vegetation index. It is hypothesized that the brightest radar returns in southern Amazonia are from newly cleared forests that are littered with standing and fallen tree boles that function as corner reflectors; and that backscatter will diminish from disturbed areas over time as fields are burned repeatedly.

Stone, Thomas A.↗

Mesoscale spiral vortex embedded within a Lake Michigan snow squall band - High resolution satellite observations and numerical model simulations

It is known that Great Lakes snow squall convection occurs in a variety of different modes depending on various factors such as air-water temperature contrast, boundary-layer wind shear, and geostrophic wind direction. An exceptional and often neglected source of data for mesoscale cloud studies is the ultrahigh resolution multispectral data produced by Landsat satellites. On October 19, 1972, a clearly defined spiral vortex was noted in a Landsat-1 image near the southern end of Lake Michigan during an exceptionally early cold air outbreak over a still very warm lake. In a numerical simulation using a three-dimensional Eulerian hydrostatic primitive equation mesoscale model with an initially uniform wind field, a definite analog to the observed vortex was generated. This suggests that intense surface heating can be a principal cause in the development of a low-level mesoscale vortex.

Lyons, Walter A.↗

Applications of artificial intelligence to space station: General purpose intelligent sensor interface

This final report describes the accomplishments of the General Purpose Intelligent Sensor Interface task of the Applications of Artificial Intelligence to Space Station grant for the period from October 1, 1987 through September 30, 1988. Portions of the First Biannual Report not revised will not be included but only referenced. The goal is to develop an intelligent sensor system that will simplify the design and development of expert systems using sensors of the physical phenomena as a source of data. This research will concentrate on the integration of image processing sensors and voice processing sensors with a computer designed for expert system development. The result of this research will be the design and documentation of a system in which the user will not need to be an expert in such areas as image processing algorithms, local area networks, image processor hardware selection or interfacing, television camera selection, voice recognition hardware selection, or analog signal processing. The user will be able to access data from video or voice sensors through standard LISP statements without any need to know about the sensor hardware or software.

Mckee, James W.↗

Astronaut and aquanaut performance and adjustment behavioral issues in analogous environments

The utility of analog environments as sources of data for future, long duration space missions is discussed. The undersea habitat is evaluated on a point-by-point basis for similarities and differences with Space Station and a possible lunar base. The comparability of Antarctic wintering-over stations is also considered. Critical issues for research are described, as well as the requirement that participants be involved in the conduct of meaningful work.

Helmreich, Robert L.↗

Optical communication with semiconductor laser diode

This interim report describes the progress in the construction of a 220 Mbps Q=4 PPM optical communication system that uses a semiconductor laser as the optical transmitter and an avalanche photodiode (APD) as the photodetector. The transmitter electronics have been completed and contain both GaAs and ECL III IC's. The circuit was able to operate at a source binary data rate from 75 Mbps to 290 Mbps with pulse rise and fall times of 400 ps. The pulse shapes of the laser diode and the response from the APD/preamplifier module were also measured.

Davidson, Frederic↗

EnviroNET - An interactive space-environment information resource

EnviroNET is an interactive menu-driven system set up as an information resource for experimenters, program managers, and design and test engineers involved in space missions. Its basic use is as a fundamental single source of data for the environment encountered by Shuttle and Space Station payloads, but is also has wider applicability in that it includes information on environments encountered by other satellites in both low altitude and high altitude (including geosynchronous) orbits. It incorporates both a text-retrieval mode and an interactive modeling code mode. The system is maintained on the ENVET MicroVAX computer at NASA/Goddard Space Flight Center. Its services are available at no cost to any user who has access to a terminal and modem. It is a tail-node on SPAN, and so it is accessible either directly or through BITNET, ARPANET, and GTE/TELENET via NPSS.

Vampola, A. L.↗

Performance evaluation in full-mission simulation - Methodological advances and research challenges

The crew-factors research program at NASA Ames has developed a methodology for studying the impact of a variety of variables on the effectiveness of crews flying realistic but high workload simulated trips. The validity of investigations using the methodology is enhanced by careful design of full-mission scenarios, performance assessment using converging sources of data, and recruitment of representative subjects. Recently, portions of this methodology have been adapted for use in assessing the effectiveness of crew coordination among participants in line-oriented flight training.

Chidester, Thomas R.↗

A study of microkinetic adjustments required to match shock wave experiments and Monte Carlo Direct Simulation for a wide Mach number range

Shock wave thickness predictions from Monte Carlo Direct Simulations, using differential scattering and the Maitland-Smith-Aziz interatomic potential, underpredict experiments as shock Mach numbers increase above about 4. Examination of several sources of data has indicated that at relatively high energies the repulsive portion of accepted potentials such as the Maitland-Smith-Aziz may be too steep. An Exponential-6 potential due to Ross, based on high energy molecular beam scattering data and shock velocity measurements in liquid argon, has been combined with the lower energy portion of the Maitland-Smith-Aziz potential. When this hybrid potential is used in Monte Carlo Direct Simulations, agreement with experiments is improved over the previous predictions using the pure Maitland-Smith-Aziz form.

Pham-Van-diep, Gerald C.↗

High precision lunar tracking for laser ranging

Laser ranging to lunar surface retroreflectors has provided a valuable source of data for the investigation of the lunar orbit, the earth's orientation in space, general relativity, and many other aspects of solar system dynamics. Due to the moon's relatively large distance, and the requirement to keep the beam from the relatively low-power laser very narrow, acquiring this data type requires very accurate telescope pointing and tracking capabilities. The nominal requirement is to keep the telescope on target within approximately 1 arcsec of its predicted location for at least several minutes. An expansion of this requirement and the methods used to accomplish this high precision pointing are presented. Difficulties encountered and a few future goals of automating the McDonald station are also discussed.

Ricklefs, Randall L.↗

The Variation of Solar Fe 14 and Fe 10 Flux over 1.5 Solar Activity Cycles

A new source of data on the solar output, namely limb flux from the one- and two-million degree corona is presented. This parameter is derived from data obtained at the National Solar Observatory at Sacramento Peak with the 40 cm coronagraph of the John W. Evans Solar Facility and the Emission Line Coronal Photometer. The limb flux is defined to be the latitude-averaged intensity in millionths of the brightness of disk center from an annulus of width 1.1 minutes centered at a height of 0.15 solar constant above the limb of emission from lines at 6374A (Fe X) or 5303A (Fe XIV). Fe XIV data have been obtained since 1973 and Fe X since 1984. Examination of the Fe XIV data shows that there is ambiguity in the definition of the last two solar activity minima, which can affect the determination of cycle rise times and lengths. There is an indication that a constant minimum or basal corona may exist at solar minimum. Cycle 22 has had a much faster onset than Cycle 21 and has now overtaken Cycle 21. The rise characteristics of the two cycles were very similar up until Jul. to Aug. 1989, at which time a long-term maximum occurred in Fe X and Fe XIV, which could possibly be the solar maximum. Another maximum is developing at the current time. Cycle 21 was characterized in Fe XIV by at least 4 major thrusts or bursts of activity, each lasting on the order of a year and all having similar maximum limb fluxes which indicates that coronal energy output is sustained over periods in which the sunspot number declines significantly. Dramatic increases in the limb fluxes occur from minimum to maximum, ranging from factors of 14 to 21 in the two lines. Two different techniques to predict the epoch of solar maximum have been applied to the Fe XIV data, resulting in estimates of April 1989 (plus or minus 1 mo) and May 1990 (plus or minus 2 mos).

Altrock, Richard C.↗

GPS Block 2R Time Standard Assembly (TSA) architecture

The underlying philosophy of the Global Positioning System (GPS) 2R Time Standard Assembly (TSA) architecture is to utilize two frequency sources, one fixed frequency reference source and one system frequency source, and to couple the system frequency source to the reference frequency source via a sample data loop. The system source is used to provide the basic clock frequency and timing for the space vehicle (SV) and it uses a voltage controlled crystal oscillator (VCXO) with high short term stability. The reference source is an atomic frequency standard (AFS) with high long term stability. The architecture can support any type of frequency standard. In the system design rubidium, cesium, and H2 masers outputting a canonical frequency were accommodated. The architecture is software intensive. All VCXO adjustments are digital and are calculated by a processor. They are applied to the VCXO via a digital to analog converter.

Baker, Anthony P.↗