Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

New advances in thermal plasma research

Recent measurements obtained of the cold or thermal plasma of the earth's magnetosphere, which is believed to originate in the ionosphere, are reviewed. Consideration is given to the results of ATS 6 measurements which indicated unexpectedly high plasma temperatures and varied pitch-angle distributions, and the data from the low-energy plasma experiments on board GEOS 1 and 2 and ISEE 1, which were intended to clarify the ATS 6 results. These later measurements of ion composition, plasma energy and plasma distribution are noted to have confirmed earlier data and discovered new plasma components (D(+) or He(+2)), an intermixing of cold ionospheric plasma and hot magnetospheric plasma, the ordering of the plasma by the magnetic field rather than the ram direction in the outer magnetosphere, and wave phenomena. Questions remaining concerning the temperature and composition distributions of the plasmasphere and plasma trough, the relative densities of the cold and warmer components of the magnetosphere, plasma energization mechanisms, and the relative mix of the various plasma distributions are indicated.

Chappell, C. R.↗

Passive microwave data for snow and ice research - Planned products from the DMSP SSM/I system

Recommendations which have been made for processing and distributing passive microwave data for snow and ice research obtained with the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are discussed. The general objectives for SSM/I data are reviewed, and the sensor and data flow are described. The SSM/I sea ice products are discussed, and algorithm/product validation is addressed. Proposed services and implementation after SSM/I launch are summarized.

Weawer, Ronald↗

Energy efficient engine, low-pressure turbine boundary layer program

A study was conducted to investigate development of boundary layers under the influence of velocity distributions simulating the suction side of two state-of-the-art turbine airfoils: a forward loaded airfoil (squared-off design) and an aft loaded airfoil (aft-loaded design). These velocity distributions were simulated in a boundary layer wind tunnel. Detailed measurements of boundary layer mean velocity and turbulence intensity profiles were obtained for an inlet turbulence level of 2.4 percent and an exit Reynolds number of 800,000. Flush-mounted hot film probes identified the boundary layer transition regimes in the adverse pressure gradient regions for both velocity distributions. Wall intermittency data showed good agreement with the correlations of Dhawan and Narasimha for the intermittency factor distribution in transitional flow regimes.

Gardner, W. B.↗

Aerodynamic characteristics of two 10-percent-thick NASA supercritical airfoils with different upper surface curvature distributions

In order to assess the degree to which the characteristic region of low curvature of the supercritical airfoil can be practically extended on the upper surface, the aerodynamic characteristics of two supercritical airfoils with different upper surface curvature distributions were measured at Mach numbers from 0.60 to 0.81. Integrated section force and moment data, surface pressure distributions, and typical wake survey profiles are presented.

Harris, C. D.↗

An Engineering Data Management System for Ipad

An overview of the capabilities and software architecture of the IPAD information processor (IPIP) is presented. IPIP is a state-of-the-art data base management system that satisfies engineering requirements not addressed by present day commercial systems. It also significantly advances a number of capabilities that are offered commercially. IPIP capabilities range from support for multiple schemas and data models to support for distributed processing, configuration control, and data inventory management. IPIP exploits semantic commonality in features offered in various forms at different user interfaces in today's commercial systems. An integrated software architecture supports all user interfaces: programming languages, interactive data manipulation, and schema languages. This approach promotes simplicity and compactness in software and permits features to be offered symmetrically across all appropriate user interfaces.

H R Johnson↗

Launch vehicle aerodynamic data base development comparison with flight data

The aerodynamic development plan for the Space Shuttle integrated vehicle had three major objectives. The first objective was to support the evolution of the basic configuration by establishing aerodynamic impacts to various candidate configurations. The second objective was to provide continuing evaluation of the basic aerodynamic characteristics in order to bring about a mature data base. The third task was development of the element and component aerodynamic characteristics and distributed air loads data to support structural loads analyses. The complexity of the configurations rendered conventional analytic methods of little use and therefore required extensive wind tunnel testing of detailed complex models. However, the ground testing and analyses did not predict the aerodynamic characteristics that were extracted from the Space Shuttle flight test program. Future programs that involve the use of vehicles similar to the Space Shuttle should be concerned with the complex flow fields characteristics of these types of complex configurations.

Hamilton, J. T.↗

Science opportunities using the NASA scatterometer on N-ROSS

The National Aeronautics and Space Administration scatterometer (NSCAT) is to be flown as part of the Navy Remote Ocean Sensing System (N-ROSS) scheduled for launch in 1989. The NSCAT will provide frequent accurate and high-resolution measurements of vector winds over the global oceans. NSCAT data will be applicable to a wide range of studies in oceanography, meteorology, and instrument science. The N-ROSS mission, is outlined, are described. The capabilities of the NSCAT flight instrument and an associated NASA research ground data-processing and distribution system, and representative oceanographic meteorological, and instrument science studies that may benefit from NSCAT data are surveyed.

Freilich, M. H.↗

Data capture and processing

A systems concept developed in response to the specific requirements imposed by the Space Station and affiliated instrumentation is described. Particular attention is given to those subsystems associated with initial data capture, handling, routing, and distribution control for return link data via the Tracking and Data Relay Satellite System. The conceived approach, designated the Customer Data and Operations System, includes a data interface facility and a data handling center whose functions are data capture, demultiplexing and routing, early preprocessing, and ancillary data handling.

Lyon, John↗

Measurements in a Transitional Boundary Layer Under Low-Pressure Turbine Airfoil Conditions

This report presents the results of an experimental study of transition from laminar to turbulent flow in boundary layers or in shear layers over separation zones on a convex-curved surface which simulates the suction surface of a low-pressure turbine airfoil. Flows with various free-stream turbulence intensity (FSTI) values (0.5%, 2.5% and 10%), and various Reynolds numbers (50,000, 100,000 200,000 and 300,000) are investigated. Reynold numbers in the present study are based on suction surface length and passage exit mean velocity. Flow separation followed by transition within the separated flow region is observed for the lower-Re cases at each of the FSTI levels. At the highest Reynolds numbers and at elevated FSn, transition of the attached boundary layer begins before separation, and the separation zone is small. Transition proceeds in the shear layer over the separation bubble. For both the transitional boundary layer and the transitional shear layer, mean velocity, turbulence intensity and intermittency (the fraction of the time the flow is turbulent) distributions are presented. The present data are compared to published distribution models for bypass transition, intermittency distribution through transition, transition start position, and transition length. A model developed for transition of separated flows is shown to adequately predict the location of the beginning of transition, for these cases, and a model developed for transitional boundary layer flows seems to adequately predict the path of intermittency through transition when the transition start and end are known. These results are useful for the design of low-pressure turbine stages which are known to operate under conditions replicated by these tests.

Simon, Terrence W.↗

Examples of Unsteady Combustion in Non-Metallized Propellants

For over thirty years the T-Burner has been the de facto standard for determining the unstable response of solid propellants. This paper reviews some of the different approaches that have been used, and briefly summarizes advantages and disadvantages of the different techniques. Data from a variety of sources have been reviewed and summarized showing the effect of various test conditions and propellant formulation variations. Much of the data taken in the 60's and early 70's were with so-called research propellants, with relatively low solids loading and usually monomodal AP as the oxidizer. Later data were obtained with propellants containing solids loading more typical and practical propellants. Several distinct differences were observed in the data for the different types of propellants. Data varying AP particle size distributions indicate that either additional fine AP or finer AP usually increases the propellant response. A significant reduction in the response can be achieved by reducing the amount of fine AP, while holding burning rate constant either by adding a catalyst or by varying the overall AP size distribution. A significant amount of data has been obtained for reduced smoke propellants containing stability additives. The data indicate that the additives provide significant particle damping, and most often, also reduce the propellant response. Data from double base propellants indicate a much broader response over a wide frequency range. This implies that double base propellants should be more unstable in tangential modes than composite propellants. This trend seems to be consistent with observed motor data. Measuring the response of metallized propellants has been a challenge due to the large damping due to metal oxide particles in the gas. Data from metallized propellants are not presented here, but will be summarized in a future paper.

Beckstead, M. W.↗

The Apollo 16 Mare Component: Petrography, Geochemistry, and Provenance

The A16 (Apollo16) site in the lunar nearside highlands is 220 km from the nearest mare. Thus it is no surprise that mare basalt samples are uncommon at the site. Here, we present the petrography and geochemistry of 5 new mare basalt samples found at the A16 site. We also discuss possible provenances of all A16 mare basalt samples using high-resolution global data for the distribution of Fe and Ti on the lunar surface derived from Clementine UV-VIS data [1-2].

Zeigler, R. A.↗

Technologies for Networked Enabled Operations

Current point-to-point data links will not scale to support future integration of surveillance, security, and globally-distributed air traffic data, and already hinders efficiency and capacity. While the FAA and industry focus on a transition to initial system-wide information management (SWIM) capabilities, this paper describes a set of initial studies of NAS network-enabled operations technology gaps targeted for maturity in later SWIM spirals (201 5-2020 timeframe).

Glass, B.↗

Characterizing the LANDSAT Global Long-Term Data Record

The effects of global climate change are fast becoming politically, sociologically, and personally important: increasing storm frequency and intensity, lengthening cycles of drought and flood, expanding desertification and soil salinization. A vital asset in the analysis of climate change on a global basis is the 34-year record of Landsat imagery. In recognition of its increasing importance, a detailed analysis of the Landsat observation coverage within the US archive was commissioned. Results to date indicate some unexpected gaps in the US-held archive. Fortunately, throughout the Landsat program, data have been downlinked routinely to International Cooperator (IC) ground stations for archival, processing, and distribution. These IC data could be combined with the current US holdings to build a nearly global, annual observation record over this 34-year period. Today, we have inadequate information as to which scenes are available from which IC archives. Our best estimate is that there are over four million digital scenes in the IC archives, compared with the nearly two million scenes held in the US archive. This vast pool of Landsat observations needs to be accurately documented, via metadata, to determine the existence of complementary scenes and to characterize the potential scope of the global Landsat observation record. Of course, knowing the extent and completeness of the data record is but the first step. It will be necessary to assure that the data record is easy to use, internally consistent in terms of calibration and data format, and fully accessible in order to fully realize its potential.

Arvidson, T.↗

The Relationship of Forest Fires Detected by MODIS and SRTM Derived Topographic Features in Central Siberia

Fires are a common occurrence in the Siberian boreal forest. The MOD14 Thermal anomalies product of the Terra MODIS Moderate Resolution Spectroradiometer) product set is designed to detect thermal anomalies (i.e. hotspots or fires) on the Earth's surface. Recent field studies showed a dependence of fire occurrence on topography. In this study MODIS thermal anomaly data and SRTM topography data were merged and analyzed to evaluate if forest fires are more likely to occur at certain combinations of elevation, slope and aspect. Using the satellite data over a large area can lead to better understanding how topography and forest fires are related. The study area covers a 2.5 Million krn(exp 2) portion of the Central Siberian southern taiga from 72 deg to 110 deg East and from 50 deg to 60 deg North. About 57% of the study area is forested and 80% of the forest grows between 200 and 1000 m. Forests with pine (Pinus sylvestris), larch (Larix sibirica, L. gmelinii), Siberian pine (Pinus sibirica), spruce (Picea obovata.) and fir (Abies sibirica) cover most of the landscape. Deciduous stands with birch (Betula pendula, B. pubescens) and aspen (Populus tremula) cover the areas of lower elevation in this region. The climate of this area is distinctly continental with long, cold winters and short hot summers. The tree line in this part of the world is around 1500 m in elevation with alpine tundra, snow and ice fields and rock outcrops extending up to over 3800 m. A 500 m resolution landcover map was developed using 2001 MODIS MOD13 Normalized Vegetation Index (NDVI) and Middle Infrared (MIR) products for seven 16-day periods. The classification accuracy was over 87%. The SRTM version 2 data, which is distributed in 1 degree by 1 degree tiles were mosaiced using the ENVI software. In this study, only those MODIS pixels were used that were flagged as "nominal or high confidence fire" by the MODIS fire product team. Using MODIS data from the years 2000 to 2005 along with the improved Shuttle Radar Topographic Mission (SRTM) version 2 data at 100 m resolution, the distribution of hot spots was examined by elevation, slope and aspect as well as by forest type. The results show that more forest area burns at lower elevations but a larger percentage of the available forest area burns at higher elevations. This is probably because steep slopes occur at higher elevations. Fires are only more common on slopes with a southern exposure if the slope is steeper than 15 degrees. The next step in this study will be to monitor areas where the risk of fire is high (steep slopes with a southern exposure) and to refine this method by incorporating anthropogenic features for more accurate fire disturbance monitoring.

Ranson, Jon K.↗

JSC Safety and Mission Assurance Data Analysis Overview

These slides describe the data analysis methods that are used to determine inputs for probabilistic risk models supporting the Space Shuttle Program. Other applications can follow a similar path probably using different data sources. Statistical approaches are different and not addressed here. Topics included here: 1) Prior Distribution; 2) Likelihood Data; 3) Bayesian Updating; and 4) Uncertainty and Error. Note: This is a high-level discussion and is not intended to be a tutorial.

Roelant, Henk↗

The Virtual Wave Observatory (VWO): A Portal to Heliophysics Wave Data

The Virtual Wave Observatory (VWO) is one of the discipline-oriented virtual observatories that help form the nascent NASA Heliophysics Data environment to support heliophysics research. It focuses on supporting the searching and accessing of distributed heliophysics wave data and information that are available online. Since the occurrence of a natural wave phenomenon often depends on the underlying geophysical -- i.e., context -- conditions under which the waves are generated and propagate, and the observed wave characteristics can also depend on the location of observation, VWO will implement wave-data search-by-context conditions and location, in addition to searching by time and observing platforms (both space-based and ground-based). This paper describes the VWO goals, the basic design objectives, and the key VWO functionality to be expected. Members of the heliophysics community are invited to participate in VWO development in order to ensure its usefulness and success.

Fung, Shing F.↗

The Next Landsat Satellite: The Landsat Data Continuity Mission

The Landsat program is one of the longest running satellite programs for Earth observations from space. The program was initiated by the launch of Landsat 1 in 1972. Since then a series of six more Landsat satellites were launched and at least one of those satellites has been in operations at all times to continuously collect images of the global land surface. The Department of Interior (DOI) U.S. Geological Survey (USGS) preserves data collected by all of the Landsat satellites at their Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. This 40-year data archive provides an unmatched record of the Earth's land surface that has undergone dramatic changes in recent decades due to the increasing pressure of a growing population and advancing technologies. EROS provides the ability for anyone to search the archive and order digital Landsat images over the internet for free. The Landsat data are a public resource for observing, characterizing, monitoring, trending, and predicting land use change over time providing an invaluable tool for those addressing the profound consequences of those changes to society. The most recent launch of a Landsat satellite occurred in 1999 when Landsat 7 was placed in orbit. While Landsat 7 remains in operation, the National Aeronautics and Space Administration (NASA) and the DOI/ USGS are building its successor satellite system currently called the Landsat Data Continuity Mission (LDCM). NASA has the lead for building and launching the satellite that will carry two Earth-viewing instruments, the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS). The OLI will take images that measure the amount of sunlight reflected by the land surface at nine wavelengths of light with three of those wavelengths beyond the range of human vision. T1RS will collect coincident images that measure light emitted by the land surface as a function of surface temperature at two longer wavelengths well beyond the range of human vision. The DOI/USGS is developing the ground system that will command and control the LDCM satellite in orbit and manage the OLI and TIRS data transmitted by the satellite. DOI/USGS will thus operate the satellite and collect, archive, and distribute the image data as part of the EROS archive. DOI/USGS has committed to renaming LDCM as Landsat 8 following launch. By either name the satellite and its sensors will extend the 40-year archive with images sufficiently consistent with data from earlier Landsat satellites to allow multi-decadal, broad-area studies of our dynamic landscapes. The next Landsat satellite and ground system are on schedule for a January, 2013 launch.

Rons, James R.↗

Advanced Analytics and Big Earth Data

NASA's Earth Science Data Systems process, archive and distribute petabytes of Earth Observation data to a variety of end users. These end users will face dramatically increased data size in the near future, bringing about new challenges and opportunities in analyzing those data. One area of particular ferment currently is Machine Learning. Many Machine Learning methods are black boxes, limiting direct insight into the data's properties. However, they can be used for a variety of data enhancement purposes, such as parameter retrieval, data fusion and image classification and segmentation. The Earth Observing System Data and Information System is also evolving to host large data volumes in the cloud, enabling data proximal analysis. As part of this effort, an Analytics framework is being developed to support and enhance user analysis of the data. By using standards based services in the framework, diverse user communities can be served, while also allowing inter-system collaboration in the analysis process.

Cloud Computing↗