Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electric and magnetic dipole strength in 112,114,116,118,120,124 Sn

Background: There is renewed interest in electric dipole strength distributions for a variety of reasons including the extraction of the dipole polarizability related to properties of the symmetry energy and a measure for the neutron skin thickness, understanding the structure of low-energy $\textit{E}$1 strength in nuclei with neutron excess, and establishing the systematics of the isovector giant dipole resonance (IVGDR). Inelastic proton scattering at energies of a few hundred MeV and very forward angles including 0° has been established as a tool for the study of electric and magnetic dipole strength distributions in nuclei. Purpose: The present work aims at a systematic investigation of the electric and magnetic dipole strength distributions in the chain of stable even-mass tin isotopes. Methods: Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295-MeV beam covering laboratory angles 0°–6° and excitation energies 6–22 MeV. Cross sections due to $\textit{E}$1 and $\textit{M}$1 excitations were extracted with a multipole decomposition analysis (MDA) and then converted to reduced transition probabilities with the “virtual photon method” for $\textit{E}$1 and the “unit cross section method” for $\textit{M}$1 excitations, respectively. Including a theory-aided correction for the high-excitation-energy region not covered experimentally, the electric dipole polarizability was determined from the $\textit{E}$1 strength distributions. Results: In this work, total photoabsorption cross sections derived from the $\textit{E}$1 and $\textit{M}$1 strength distributions show significant differences compared to those from previous ($\textit{γ, xn}$) experiments in the energy region of the IVGDR. The widths of the IVGDR deduced from the present data with a Lorentz parametrization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from empirical systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The $\textit{E}$1 strengths below neutron threshold show fair agreement in this work with results from ($\textit{γ, γ'}$) experiments on 112,116,120,124 Sn in the energy region between 6 and 7 MeV, where also isoscalar $\textit{E}$1 strength was found for 124 Sn. At higher excitation energies, large differences are observed, pointing to a different nature of the excited states with small ground-state branching ratios. The isovector spin-$\textit{M}$1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei. Conclusions: The present results contribute to the solution of a variety of nuclear structure problems including the systematics of the energy and width of the IVGDR, the structure of low-energy $\textit{E}$1 strength in nuclei, new constraints to energy density functionals (EDFs) aiming at a systematic description of the dipole polarizability across the nuclear chart, from which properties of the symmetry energy can be derived, and the systematics of the isovector spin-$\textit{M}$1 strength in heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Neural posterior unfolding

Differential cross section measurements are the currency of scientific exchange in particle and nuclear physics. A key challenge for these analyses is the correction for detector distortions, known as deconvolution or unfolding. Binned unfolding of cross section measurements traditionally rely on the regularized inversion of the response matrix that represents the detector response, mapping pre-detector (`particle level') observables to post-detector (`detector level') observables. In this paper we introduce Neural Posterior Unfolding, a modern, Bayesian approach that leverages normalizing flows for unfolding. By using normalizing flows for neural posterior estimation, NPU offers several key advantages including implicit regularization through the neural network architecture, fast amortized inference that eliminates the need for repeated retraining, and direct access to the full uncertainty in the unfolded result. In addition to introducing NPU, we implement a classical Bayesian unfolding method called Fully Bayesian Unfolding (FBU) in modern Python so it can also be studied. These tools are validated on simple Gaussian examples and then tested on simulated jet substructure examples from the Large Hadron Collider (LHC). We find that the Bayesian methods are effective and worth additional development to be analysis ready for cross section measurements at the LHC and beyond.

Analysis and statistical methods↗
DOE OSTI2024

Study of $Z \rightarrow ll\gamma$ decays at $\sqrt{s}$ = 8 TeV with the ATLAS detector

This paper presents a study of $Z \rightarrow ll\gamma$ decays with the ATLAS detector at the Large Hadron Collider. The analysis uses a proton–proton data sample corresponding to an integrated luminosity of 20.2 fb -1 collected at a centre-of-mass energy $\sqrt{s}$ = 8 TeV. Integrated fiducial cross-sections together with normalised differential fiducial cross-sections, sensitive to the kinematics of final-state QED radiation, are obtained. The results are found to be in agreement with state-of-the-art predictions for final-state QED radiation. First measurements of $Z \rightarrow ll\gamma\gamma$ decays are also reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Model, data, and code for paper "Modeling of streamflow in a 30-kilometer-long reach spanning 5 years using OpenFOAM 5.x"

The data package includes data, model, and code that support the analyses and conclusions in the paper titled “modeling of streamflow in a 30-kilometer-long reach spanning 5 years using OpenFOAM 5.x”. The primary goal of this paper is to demonstrate that key streamflow properties such as water depth, flow velocity, and dynamic pressure in a natural river at 30-kilometer scale over 5 years can be reliably and efficiently modeled using the computational framework presented in this paper. To support the paper, various data types from remote sensing, field observations, and computational models are used. Specific details are described as follows. Firstly, the river bathymetry data was obtained from a Light Detection and Ranging (LiDAR) survey. This data is then converted to a triangulated surface format, STL, for mesh generation in OpenFOAM. The STL data can be found in Model_Setups/BaseCase_2013To2015/constant/triSurface. The OpenFOAM mesh generated using this STL file can be found in constant/polyMesh. Other model setups, boundary and initial conditions can be found in /system and /0.org under folder BaseCase_2013To2015. A similar data structure can also be found in BaseCase_2018To2019 for the simulations during 2018 and 2019. Secondly, the OpenFOAM simulations need the upstream discharge and water depth information at the upstream boundary to drive the model. These data are generated from a one-dimensional hydraulic model and the data can be found under the folder Model_Setups /1D model Mass1 data. The mass1_65.csv and mass1_191.csv files include the results of the 1D model at the model inlet and outlet, respectively. The Matlab source code Mass1ToOFBC20182019.m is used to convert these data into OpenFOAM boundary condition setups.With the above OpenFOAM model, it can generate data for water surface elevation, flow velocity, and dynamic pressure. In this paper, the water surface elevation was measured at 7 locations during different periods between 2011 and 2019. The exact survey locations (see Fig1_SurveyLocations.txt) can be found in folder Fig_1. The variation of water stage over time at the 7 locations can be found in folder /Observation_WSE. The data type include .txt, .csv, .xlsx, and .mat. The .mat data can be loaded by Matlab.We also measured the flow velocities at 12 cross-sections along the river. At each cross-section, we recorded the x, y locations, depth, three velocity components u,v,w. These data are saved to a Matlab format which can be found under folder /Observation_Velocity and /Fig_1. The relative locations of velocity survey locations to the river bathymetry can be found in Figure 1c.The water stage data at the 7 locations from OpenFOAM, 1D, and 2D hydraulic models are also provided to evaluate the long-term performance of 3D models vs 1D/2D models. The water stage data for the 7 locations from OpenFOAM have been saved to .mat format and can be found in /OpenFOAM_WSE. The water stage data from the 1D model are saved in .csv format and can be found in /Mass1_WSE. The water stage from the 2D model is saved as .mat format and can be found in / Mass2_WSEIn addition, the OpenFOAM model outputs the information of hydrostatic and hydrodynamic pressure. They are saved as .mat format under folder /Fig_11/2013_1. As the files are too large, we only uploaded the data for January 2013. The area of different ratio of dynamic pressure to static pressure for all simulation range, i.e., 2013-2015, are saved to .mat format. They can be found in /Fig_11/PA. Further, the data of wall clock time versus the solution time of the OpenFOAM modeling are also saved to .mat format under folder /Fig_13/LogsMat. In summary, the data package contains seven data types, including .txt, .csv, .xlsx, .dat, .stl, .m, and .mat. The former 4 types can be directly open using a text editor or Microsoft Office. The .mat format needs to be read by Matlab. The Matlab source code .m files need to be run with Matlab. The OpenFOAM setups can be visualized in ParaView. The .stl file can be opened in ParaView or Blender. The data in subfolders Fig_1 to Fig_10 and Fig_12 are copied from the aforementioned data folders to generate specific figures for the paper. A readME.txt file is included in each subfolder to further describe how the data in each folder are generated and used to support the paper.Please use the data package's DOI to cite the data package. Please contact yunxiang.chen@pnnl.gov if you need more data related to the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Verification of the CP2020 Library

For many years, “pencil beam” (aka “broomstick”) problems have been used in Monte Carlo neutronic code verification studies . At Los Alamos, they were used to verify the changes associated with the upgrade of NJOY / MCNP to allow continuous angular distributions (instead of discrete angular distributions) from S(α,β) scattering. Recently, “pencil beam” problems have been applied to the verification of charged particle data for MCNP. Another verification test for CP2020 was to compare the continuous energy reaction cross sections generated by ACER with multigroup reaction cross sections generated by GROUPR from the same evaluation file. This method was also used in the verification of the most recent S(α,β) neutron libraries at Los Alamos .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Analysis of SCALE Criticality and Sensitivity Calculations for Reflected HEU Cylinders [Abstract]

The SCALE code package offers several nuclear data libraries to support Monte Carlo (MC) transport, as well as MC-based derivation of $\kappa$ eff sensitivity and uncertainty (S/U) data. The CSAS sequence using the KENO MC code can utilize continuous-energy (CE) cross sections, or pre-generated multigroup (MG) cross section libraries. The use of MG libraries introduces bias into calculations in exchange for faster transport solutions. The TSUNAMI-3D sequence also utilizes KENO MC calculations. TSUNAMI-3D has two CE calculational methods: the Iterated Fission Probability (IFP) method, and the Contribution-Linked eigenvalue sensitivity/Uncertainty estimation via Tracklength importance CHaracterization (CLUTCH) method. Previous work has shown poor agreement between CLUTCH and confirmatory direct perturbation calculations in specific applications, e.g., fissionable and polyethylene reflectors

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Neutron-neutron quasifree scattering in neutron-deuteron breakup at 10 MeV

New measurements of the neutron-neutron quasifree scattering cross section in neutron-deuteron breakup at an incident neutron energy of 10.0 MeV are reported. The experiment setup was optimized to evaluate the technique for determining the integrated beam-target luminosity in neutron-neutron coincidence cross-section measurements in neutron-deuteron breakup. The measurements were carried out with a systematic uncertainty of ± 5.6%. Our data are in agreement with theoretical calculations performed using the CD-Bonn nucleon-nucleon potential in the Faddeev formalism. The measured integrated cross section over the quasifree peak is 20.5 ± 0.5(stat) ± 1.1 (sys) mb/sr 2 in comparison with the theory prediction of 20.1 mb/sr 2 . Overall, these results validate our technique for determining the beam-target luminosity in neutron-deuteron breakup measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Forward and Off-Forward Parton Distributions from Lattice QCD

The interpretation of (semi-)inclusive and certain exclusive scattering processes relies on the factorization of hard parton level cross sections from long-range and non-perturbative parton correlations. The familiar Parton Distribution Functions (PDFs) and Generalized Parton Distributions quantify the non-perturbative dynamics in these situations and address a number of key questions surrounding the structure of hadrons. A certain class of matrix elements accessible in lattice QCD, so called Lattice Cross Sections, have been shown to factorize into these collinear distributions in a manner akin to the factorization of hadronic cross sections. In the short-distance regime, matrix elements of space-like separated two-current operators and parton bilinears can be expressed as the convolution of perturbative coefficient functions and the PDFs. Matrix elements of this type are isolated in the pion and nucleon, each offering a glimpse of the unpolarized valence quark content of these phenomenologically important hadronic states. The calculations within the nucleon represent the first application of the distillation spatial smearing paradigm to the collinear structure of hadrons, and is found to offer higher precision data compared to similar calculations in the literature. A novel method to obtain PDFs from these lattice data, while simultaneously controlling systematic effects, is developed and applied to the nucleon dataset. The coordinate space factorization of space-like separated parton bilinears has also recently been extended to include Generalized Parton Distributions. Preliminary results in off-forward nucleon matrix elements using distillation are explored.

Egerer, Colin↗
DOE OSTI2020

Electron Spin-Polarization Dependent Damage to Chiral Amino Acid l-Histidine

The damage of approximately monolayer films of L-histidine by low-energy spin-polarized electrons (SPE) ejected from a magnetized cobalt substrate has been probed using X-ray photoelectron spectroscopy (XPS). Average damage cross sections for N-containing motifs of L-histidine are 25-30 and 2-5 Mb for zwitterions and neutral molecules, respectively. Here, the magnetization direction of the substrate, which controls the ejected SPE helicity, was reversed in situ, and statistically significant differences in the damage cross sections of 10-30% were measured between positive and negative electron helicities. This is the first measurement of spin dichroism (SD) in an amino acid. The differential cross sections suggest that inelastic scattering of SPE with chiral molecules could contribute to the persistence of one enantiomer vs the other under certain irradiation conditions, particularly for the zwitterionic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Final Design for Thermal/Epithermal eXperiments using High 240 Pu Content Plutonium/Aluminum Zero Power Research Reactor Plates with Polyethylene Moderator (IER 520 Final Design CED-2 Report)

The US Department of Energy Nuclear Criticality Safety Program (NCSP) convened a multinational Thermal Epithermal eXperiments (TEX) meeting in July of 2011 to discuss the data and experimental needs of criticality safety practitioners. The number one and two priority integral experiment data needs were for 239 Pu and 240 Pu, with special emphasis on cross section performance in the intermediate energy range (from 0.625 eV to 100 keV). LLNL measured five critical configurations with LANL for the plutonium test bed (IER-184) and published the experiments as International Criticality Safety Benchmark Evaluation Project evaluation PUMET-MIXED-002. Modeling of the benchmark configurations using ENDF/B-VIII.0 nuclear data showed significant overprediction of reactivity for configurations that had a large percentage of fissions in the intermediate energy regime. This report documents a variation on the TEX plutonium test bed to provide a test of 240 Pu cross sections, with sensitivity of the configuration to 240 Pu radiative capture and fission cross sections a priority for the design.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

The proton charge radius extracted from the initial-state radiation experiment at MAMI

Abstract We report on a comprehensive reinterpretation of the existing cross-section data for elastic electron-proton scattering obtained by the initial-state radiation technique, resulting in a significantly improved accuracy of the extracted proton charge radius. By refining the external energy corrections we have achieved an outstanding description of the radiative tail, essential for a detailed investigation of the proton finite-size effects on the measured cross sections. This development, together with a novel framework for determining the radius, based on a regression analysis of the cross sections employing a polynomial model for the form factor, led us to a new value for the charge radius, which is $$(0.878 \pm 0.011_\mathrm {stat.}\pm 0.031_\mathrm {sys.}\pm 0.002_\mathrm {mod.})\,\mathrm {fm}$$ ( 0.878 ± 0 . 011 stat . ± 0 . 031 sys . ± 0 . 002 mod . ) fm

Physics↗
DOE OSTI2022

Impact of Increased Latent Generations on Sensitivity Calculations with SCALE

Analyses of cross section sensitivity data from systems with fissile material allow analysts to associate an importance for each material, nuclide, reaction, and neutron energy by simulating real world criticality scenarios. Although criticality safety validation efforts can be guided by the cross-section sensitivity and uncertainty data generated for a particular system, these calculations can often be computationally expensive and sometimes cumbersome without proper guidance. The TSUNAMI suite within the SCALE code package has several methods for generating sensitivity data, including multigroup and continuous energy (CE) capabilities. The release of SCALE 6.3 has three different CE methods for generating cross section sensitivity data: (1) the Iterated Fission Probability (IFP) method with the KENO Monte Carlo transport solver, (2) the IFP method with the Shift Monte Carlo transport solver, and (3) the Contributon-Linked eigenvalue sensitivity/Uncertainty estimation via Tracklength importance CHaracterization (CLUTCH) method with the KENO Monte Carlo transport solver. Although the CLUTCH method has additional parameters for generating sensitivity data files relative to the IFP method, all three methods use latent generations, which are the generations between an event (i.e., fission) and the assessment of importance based on the asymptotic population of progeny neutrons. Increasing the number of latent generations in a calculation leads to increased discrimination of the sensitivity coefficients but at the cost of the increased uncertainty associated with those generated values. Analysts must balance the accuracy of the sensitivity calculations and its uncertainty with the associated computational cost involved in generating the values. This paper discusses the impact of adjusting the latent generation parameter for a range of sensitivity values and how these changes compare with the direct perturbation values obtained from a change of ±0.5% Δ k in both benchmark and safety application models. Two benchmarks from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the MPC-32 dual purpose canister for spent nuclear fuel are used for analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

First Observation of a Three-Resonance Structure in e + e − → Nonopen Charm Hadrons

We report the measurement of the inclusive cross sections for e + e − → nOCH (where nOCH denotes non-open charm hadrons) with improved precision at center-of-mass (c.m.) energies from 3.645 to 3.871 GeV. We observe three resonances: R ( 3760 ) , R ( 3780 ) , and R ( 3810 ) with significances of 8.1 σ , 13.7 σ , and 8.8 σ , respectively. The R ( 3810 ) state is observed for the first time, while the R ( 3760 ) and R ( 3780 ) states are observed for the first time in the nOCH cross sections. Two sets of resonance parameters describe the energy-dependent line shape of the cross sections well. In set I [set II], the R ( 3810 ) state has mass ( 3805.7 ± 1.1 ± 2.7 ) [ ( 3805.7 ± 1.1 ± 2.7 ) ] MeV / c 2 , total width ( 11.6 ± 2.9 ± 1.9 ) [ ( 11.5 ± 2.8 ± 1.9 ) ] MeV , and an electronic width multiplied by the nOCH decay branching fraction of ( 10.9 ± 3.8 ± 2.5 ) [ ( 11.0 ± 3.4 ± 2.5 ) ] eV . In addition, we measure the branching fractions B [ R ( 3760 ) → nOCH ] = ( 25.2 ± 16.1 ± 30.4 ) % [ ( 6.4 ± 4.8 ± 7.7 ) % ] and B [ R ( 3780 ) → nOCH ] = ( 12.3 ± 6.6 ± 8.3 ) % [ ( 10.4 ± 4.8 ± 7.0 ) % ] for the first time. The R ( 3760 ) state can be interpreted as an open-charm (OC) molecular state, but containing a simple four-quark state component. The R ( 3810 ) state can be interpreted as a hadrocharmonium state. Published by the American Physical Society 2024

Physics↗
DOE OSTI2022

Effect of nuclear charge on laser-induced fusion enhancement in advanced fusion fuels

Here, based on the preliminary work done in a previous paper [Phys. Rev. C 105, 054001 (2022)], we investigate the effects of laser-induced fusion rate enhancements of different fusion fuels. In the aforementioned work, which considered $_{1}^{2}$H-$_{1}^{3}$H (D-T) and DHe 3 fusion, it was observed that a larger product of charge numbers of the fusion reactants leads to an increased laser-induced enhancement to the fusion cross section for static external electric fields. We investigate whether this trend persists for DT, DHe 3 , and pB 11 fusion for dynamical electric fields, using the semiclassical approaches of the Wentzel-Kramers-Brillouin method and the imaginary-time method, as well as the Kramers- Henneberger method, and the Volkoff-state approximation. We find that the fusion cross section of pB 11 indeed exhibits the largest relative enhancement for all laser parameters considered and may even surpass the cross section of DT and DHe 3 fusion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Investigating Gadolinium-Lined Sodium-Iodide Neutron Detectors for Mobile Applications

For enhancing the effectiveness of nonproliferation efforts in neutron detection, most portable instruments rely on 6 Li scintillators, 10 B-based detectors, or gas-filled 3 He proportional counters. Additionally, gamma-ray detectors based on scintillators and semiconductors are often employed for search applications to find radioactive material in the field. These systems typically include dedicated detectors along with separate high voltage supplies and processing electronics for the gamma-ray and neutron detectors. Ideally, a portable radiation detection system should be lightweight, compact, and cost-effective. In the field, scintillators can serve a dual purpose: (1) detecting gamma-rays and (2) detecting neutrons. Gamma-ray detection with scintillators is based on the interaction of gamma-rays within the scintillating material, whereas neutron detection depends indirectly on neutron capture events. These capture events generate conversion electrons and gamma-rays, which can interact with the scintillator. For enhancing neutron capture, the scintillator can be surrounded by neutron absorber materials with a high neutron cross section. The resulting secondary electrons and gamma-rays from neutron interactions, depending on the absorber material used, can then be analyzed to detect the presence of neutron sources. Similarly, semiconductor-based detectors can be employed along with neutron absorbers as liners for neutron detection. 158 Gd has a significantly larger neutron cross section than 3 He, commonly used in gas-filled proportional counters, as shown in Figure 1. For thermal (0.025 eV) neutrons, the absorption cross section of 158 Gd is 10,000 times greater than that of 3 He (refer to Figure 1). This feature makes naturally occurring gadolinium, which consists of 24.8% 158 Gd, a promising neutron absorber material for use in combination with gamma-ray detectors–yielding a hybrid detector–for neutron detection.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

Measurement of beauty-quark production in pp collisions at $\sqrt{s}$ = 13 TeV via non-prompt D mesons

The p T -diferential production cross sections of non-prompt D 0 , D + , and D$^+_s$ at a centre-of-mass energy $\sqrt{s}$ = 13 TeV. The measurements are performed at midrapidity, |y| < 0.5, with the data sample collected by ALICE from 2016 to 2018. The results are in agreement with predictions from several perturbative QCD calculations. The fragmentation fraction of beauty quarks to strange mesons divided by the one to non-strange mesons, $f_s$/($f_u$ +$f_d$), is found to be 0.114 ± 0.016 (stat.) ± 0.006 (syst.) ± 0.003 (BR) ± 0.003 (extrap.). This value is compatible with previous measurements at lower centre-of-mass energies and in diferent collision systems in agreement with the assumption of universality of fragmentation functions. In addition, the dependence of the non-prompt D meson production on the centre of-mass energy is investigated by comparing the results obtained at $\sqrt{s}$ = 5.02 and 13 TeV, showing a hardening of the non-prompt D-meson p T -diferential production cross section at higher $\sqrt{s}$. Finally, the $b\overline{b}$ production cross section per unit of rapidity at midrapidity is calculated from the non-prompt D 0 , D + , D$^+_s$, and $Λ^+_c$ hadron measurements, obtaining dσ/dy = 75.2 ± 3.2 (stat.) ± 5.2 (syst.)$^{+12.3}_{-3.2}$ (extrap.) µb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Probing proton cross-shell excitations through the two-neutron removal from 38 Ca

Bound states of the neutron-deficient, near-dripline nucleus 36 Ca were populated in two-neutron removal from the ground state of 38 Ca, a direct reaction sensitive to the single-particle configurations and couplings of the removed neutrons in the projectile wave function. Final-state exclusive cross sections for the formation of 36 Ca and the corresponding longitudinal momentum distributions, both determined through the combination of particle and γ-ray spectroscopy, are compared to predictions combining eikonal reaction theory and shell-model two-nucleon amplitudes from the USDB, USDC, and ZBM2 effective interactions. The final-state cross-section ratio σ($2$$^{+}_{1}$) / σ (0 + ) shows particular sensitivity and is approximately reproduced only with the two-nucleon amplitudes from the ZBM2 effective interaction that includes proton cross-shell excitations into the pf shell. Characterizing the proton pf-shell occupancy locally and schematically, an increase of the sd – pf shell gap by 250 keV yields an improved description of this cross-section ratio and simultaneously enables a reproduction of the B(E2;$0$$^{+}_{1}$ → $2$$^{+}_{1}$) excitation strength of 36 Ca. Furthermore, this highlights an important aspect if a new shell-model effective interaction for the region was to be developed on the quest to model the neutron-deficient Ca isotopes and surrounding nuclei whose structure is impacted by proton cross-shell excitations.

20 ≤ A ≤ 38↗
DOE OSTI2021

Leading jets and energy loss

The formation and evolution of leading jets can be described by jet functions which satisfy non-linear DGLAP-type evolution equations. Different than for inclusive jets, the leading jet functions constitute normalized probability densities for the leading jet to carry a longitudinal momentum fraction relative to the initial fragmenting parton. We present a parton shower algorithm which allows for the calculation of leading-jet cross sections where logarithms of the jet radius and threshold logarithms are resummed to next-to-leading logarithmic (NLL') accuracy. By calculating the mean of the leading jet distribution, we are able to quantify the average out-of-jet radiation, the so-called jet energy loss. When an additional reference scale is measured, we are able to determine the energy loss of leading jets at the cross section level which is identical to parton energy loss at leading-logarithmic accuracy. We identify several suitable cross sections for an extraction of the jet energy loss and we present numerical results for leading subjets at the LHC. In addition, we consider hemisphere and event-wide leading jets in electron-positron annihilation similar to measurements performed at LEP. Besides the average energy loss, we also consider its variance and other statistical quantities such as the KL divergence which quantifies the difference between quark and gluon jet energy loss. We expect that our results will be particularly relevant for quantifying the energy loss of quark and gluon jets that propagate through hot or cold nuclear matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗