Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Contracting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

A trilevel model against false gas-supply information attacks in electricity systems

The interdependence between natural gas and electricity systems is increasing rapidly due to the growing reliance on natural gas-fired generating units. Availability of natural gas for gas-fired generating units can impact the secure operation of electricity systems. Fuel supply shortage for gas-fired units can be caused by uncertain interruptible supply contracts and incorrect supply information. This article proposes a trilevel min-max-min defender-attacker-operator optimization problem to provide the power system operator a screening methodology that allocates a limited budget for best protecting critical fuel supply information, and also the strategies to sign firm supply contract to reduce natural gas supply uncertainties. We utilize a column and constraint generation (C&CG) algorithm to solve the proposed problem. We illustrate the effectiveness of this trilevel formulation using a case study based on IEEE 24-node test system.

42 ENGINEERING↗

Micromovements and discomfort associated with flight mission with helmet operation tasks with different levels of cognitive workload

When performing stationary tasks under elevated cognitive workload, individuals must perform continual muscle contractions to maintain stability of the body, resulting in fatigue of the postural muscles. When the muscles perform these contractions in a prolonged manner, the body potentially responds through small changes in body movements—micromovements that may lead to discomfort. The study purpose was to evaluate impact of cognitive load on micromovements. The micromovements were measured during three different cognitive workloads; low, medium, and high. The NASA-TLX score was used to evaluate the perceived mental workload and discomfort was assessed by visual analog scale. In total, 60 subjects (30 males and 30 females) were recruited and performed cognitive tasks that simulated flight operations such as changing the radio frequency based on air traffic control messages, balancing the fuel levels in simulated fuel tanks, and aiming a reticle in a designated moving target using the cyclic control. Cognitive load was defined by the frequency of events. Micromovements were defined by changes in the center of pressure (COP) of the seat pan and COP standard deviation. It was found that the high cognitive workloads had the highest NASA-TLX scores including mental demands, temporal demands, and effort. The neck area had the highest overall levels of discomfort followed by upper back. The highest standard deviation for COP shift and number of micromovements occurred for medium cognitive workloads. In conclusion, while there were some interesting trends, few trends reached a statistical significance due to high variability among subjects for the outcome variables.

60 APPLIED LIFE SCIENCES↗

Thermal shock resistance of lightweight cements developed for geothermal conditions

Cements are a critical component in well construction, as they act to prevent well fluid and gas escape, prevent corrosion of the casing, and strengthen the wellbore to prevent deformation. Under the high temperature/pressure conditions common in geothermal systems, the injection of cold water for energy production is expected to induce cyclic damage to the borehole cement through the rapid temperature fluctuations. These “thermal shocks” are expected to cause casing shrinkage, annulus formation, and cement tensile stresses. To understand the effect of cold water injection on the wellbore environment, a set of rock-cement-steel samples were created to simulate the structure of a geothermal well. Lightweight thermally-insulating cement blends were tested under thermal shock conditions in this study. In each test, the samples were pressurized to an effective pressure of ~3.5 MPa and placed at high temperatures. Thermal shocks were performed by injecting cold water (~10-15 °C) through the samples at a constant rate while keeping the samples at high temperatures until the sample temperature stopped decreasing and deformation ceased. Eight thermal shock tests were conducted with each sample – two at 100 °C and six at 200 °C. Post-tests analysis was then conducted by cutting open each sample to examine the damage in each component of the simulated wellbore. Experimental results suggest that all samples experienced similar degrees of axial and lateral contraction during cold water injection, but for the most part this contraction is recoverable when injection halts. Post-test analysis revealed that fly ash cenosphere pre-treatment had the best effect on improving thermal shock resistance in the cement blends. Thermomechanical modeling of likely stress paths experienced by the cements during heating/cooling cycles shows that elasto-plastic cement constitutive behavior results in most plastic strain occurring during the initial heating steps, with mostly elastic strain occurring during the thermal shock cycles. In conclusion, this agrees with experimental evidence, suggesting that cement damage from shocking occurs via other mechanisms such as chemical alteration, corrosion, and fatigue.

36 MATERIALS SCIENCE↗

Growth of Jupiter: Formation in disks of gas and solids and evolution to the present epoch

The formation of Jupiter is modeled via core-nucleated accretion, and the planet's evolution is simulated up to the present epoch. Throughout the phases when the planet acquires most of its heavy-element content, the calculation of solids' accretion accounts for interactions with an evolving disk of planetesimals. The phase of growth from an embryo of a few hundred kilometers in radius until the time when the accretion of gas overtakes solids' accretion was presented by D'Angelo et al., and the same numerical methods are applied here. Those calculations followed the formation for about 4 × 10 5 years, until the epoch when the heavy-element and hydrogen/helium masses were $M_Z ≈ 7.3$ and $M_{XY} ≈ 0.15$ Earth's masses ($M_⊕$), respectively, and $\dot {M} _{XY} ≈ $$\dot {M}_Z$. In this work, the calculation is continued through the phase when $M_{XY}$ grows to equal $M_Z$ , at which age, about 2.4 × 10 6 years, the total mass of the planet is $M_p ≈ 20 M_⊕$. About 9 × 10 5 years later, $M_p$ is approximately $60 M_⊕$ and $M_Z ≈ 16 M_⊕$, three-quarters of which are delivered by planetesimals larger than 10 km in radius. Around this epoch, the contraction of the envelope dictates gas accretion rates a few times 10 –3 $M_⊕$ per year, initiating the regime of disk-limited accretion, whereby the planet can accrete all the gas provided by the disk, and its evolution is therefore tied to disk's evolution. Growth is continued by constructing simplified models of protosolar accretion disks that evolve through viscous diffusion, winds, and accretion on the planet. Jupiter's formation ends after ≈ 3.4–4.2 Myr, depending on the applied disk viscosity parameter, when nebula gas disperses. The young Jupiter is 4.5–5.5 times as voluminous as it is presently and thousands of times as luminous, ~10 –5 $L_⊙$. The heavy-element mass is ≈ 20 $M_⊕$. The evolution proceeds through the cooling and contraction phase, in isolation except for solar irradiation. After 4570 Myr, the age of the solar system, radius and luminosity of the planet are within 10$\%$ of current values, accounting also for uncertainties in the power absorbed from the Sun. During formation, and soon thereafter, the planet exhibits features, e.g., luminosity and effective temperature, that may probe aspects of the latter stages of formation, if observable. These possibly distinctive features, however, seem to disappear within a few tens of Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

Losses of CO and CO 2 upon collision-activated dissociation of substituted 2-methoxyphenoxides after methyl radical loss

Some deprotonated, substituted 2-methoxyphenols fragment by methyl radical loss followed by competing losses of CO and CO 2 upon collisional activation in linear quadrupole ion trap mass spectrometers. These reactions were examined experimentally and computationally in order to determine their mechanisms. For deprotonated vanillin, the CO loss was found to involve ring contraction, with the highest free energy barrier of 58.0 kcal mol -1 (for the syn rotamer; here, syn refers to the relationship between the aldehyde oxygen atom and the oxygen atom of the methoxy group) for the entire process. The atoms lost in this fragmentation are the oxygen atom that was bound to the first eliminated methyl group and the aromatic carbon atom bound to this oxygen. Examination of carbon-13 labeled vanillin supports these assignments. Examination of several model compounds revealed that this reaction requires the presence of an electron-withdrawing substituent in the para-position relative to the phenol moiety. In contrast, the CO 2 loss from deprotonated vanillin occurs via ring opening followed by re-cyclization and then ring contraction, leading to the loss of CO 2 in a process wherein the highest free energy barrier is 84.5 kcal mol -1 (for the syn isomer). The atoms lost in this fragmentation are the carbon and oxygen atoms from the phenoxide group and the oxygen atom that was bound to the first eliminated methyl group, which is supported by examination of carbon-13 labeled vanillin. Despite the higher total free energy requirement, the CO 2 loss is competitive with CO loss, possibly due to favorable entropy and low activation energy (free energy barrier of 48.9 kcal mol -1 ) for the first reaction step (the analogous value for CO loss is 58.0 kcal mol -1 ). The extent of CO 2 loss is strongly affected by substituents – it either is not observed or is very slow for the other compounds studied here. For example, it is substantially less favorable than CO loss (highest free energy barrier 60.9 kcal mol -1 ) for deprotonated acetovanillone for which the first reaction step for CO 2 loss has a substantially greater free energy barrier (60.6 kcal mol-1) than for vanillin.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variation in Post-Surgical Lumpectomy Cavity Volume With Delay in Initiation of Breast Irradiation Because of Chemotherapy

Purpose: The addition of a radiotherapy boost has been shown to improve local control in breast conservation therapy. Three dimensional planning provides more accurate targeting of the operative bed than clinical setup using the lumpectomy scar. However, contraction of the lumpectomy cavity over time may have implications for the volume of tissue included in the boost field. Methods and Materials: The clinical variables and treatment planning volumes for patients receiving whole-breast radiotherapy at a single institution between July 1, 2006, and December 31, 2007 were analyzed retrospectively. Results: Of the 93 patients identified, 29 received chemotherapy (CTX) and 64 did not; CTX was sequenced before radiotherapy in all patients. Patients receiving CTX were more likely to have higher T and N stage and a longer interval between definitive breast surgery and radiation. The lumpectomy specimens of women receiving CTX trended toward being larger than those of women not receiving CTX (113.4cm{sup 3} vs. 74.6cm{sup 3}, p = 0.08). Despite this, the volume of the lumpectomy cavity measured on computed tomography was smaller in patients receiving CTX (9.1cm{sup 3} vs. 16.8cm{sup 3}, p = 0.02), as was the volume of the planning target volume (56.6cm{sup 3} vs. 79.9cm{sup 3}, p = 0.02). Conclusions: Patients receiving CTX were at higher risk for local recurrence. However, as a result of lumpectomy bed contraction, these patients received a boost to a smaller volume than patients not receiving CTX. This finding is counterintuitive and supports re-evaluation of the optimal size of the boost field. In addition, these results may have implications for patients treated with partial breast irradiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Chemistry of K in Cu(In,Ga)Se 2 photovoltaic absorbers: Effects of temperature on Cu-K-In-Se films

Incorporation of K has led to world record Cu(In,Ga)Se 2 photovoltaic power conversion efficiencies, but there is poor consensus about the role of phase impurities in these advances. This work lays a foundation for identifying and controlling these phase impurities. Films of Cu-K-In-Se were co-evaporated at varied K/(K + Cu) compositions and substrate temperatures (with constant (K + Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to favor Cu 1-x K x InSe 2 alloy formation, relative to two-phase CuInSe 2 +KInSe 2 formation. Structures from X-ray diffraction (XRD), band gaps, resistivities, minority carrier lifetimes and carrier concentrations from time-resolved photoluminescence were in agreement with previous reports, where low K/(K + Cu) composition films exhibited properties promising for photovoltaic absorbers. Films grown at 400-500 °C were then annealed to 600 degrees C in a controlled Se ambient, which caused K loss by evaporation in proportion to the initial K/(K + Cu) composition. Similar to growth temperature, annealing drove Cu 1-x K x InSe 2 alloy consumption and CuInSe 2 +KInSe 2 production, as evidenced by high temperature XRD. Annealing also decomposed KInSe 2 and formed K 2 In 12 Se 19 . At high temperature, the KInSe 2 crystal lattice gradually contracted as temperature and time increased, as well as just time. Evaporative loss of K during annealing could accompany the generation of vacancies on K lattice sites, and may explain the KInSe 2 lattice contraction. As a result, this knowledge of Cu-K-In-Se material chemistry may be used to predict and control minor phase impurities in Cu(In,Ga)(Se,S) 2 photovoltaic absorbers - where impurities below typical detection limits may have played a role in recent world record photovoltaic efficiencies that utilized KF post-deposition treatments.

14 SOLAR ENERGY↗

Local atomic structure and Ni nanophase segregation in Zn 1-x Ni x S thin films

Here, the local atomic structure of Zn 1-x Ni x S thin films was investigated using X-ray absorption spectroscopy. The films were grown using RF-sputtering at atomic concentrations x = 0.00, x = 0.04, x = 0.08 and x = 0.14. X-ray diffraction shows that the lattice parameter contracts with increasing Ni concentration, consistent with the smaller atomic radii of Ni compared to that one of Zn. Optical absorption reveals a reduction of the bandgap as Ni concentration increases, except for sample x = 0.14 where a complex behavior is observed. Results from X-ray absorption near edge structure (XANES) spectroscopy indicate a shift in the valence state of Ni for the x = 0.14 sample. The analysis of the extended X-ray absorption fine structure (EXAFS) spectra indicate a contraction of ~0.7 Å in the Ni–S bond distance when compared to the Zn–S bond length, which generates local lattice distortions and an increment of the static disorder as the Ni concentration increases. The EXAFS results for sample x = 0.14 show the presence of a Zn 1-x Ni x S phase and a nanoscopic metallic Ni phase with domain sizes below the diffraction limit. These results reveal that the local atomic structure differs in a significant manner from the average crystalline structure, implying its importance for the determination of the electronic properties of this material.

36 MATERIALS SCIENCE↗

Evaluating the incentive for soil organic carbon sequestration from carinata production in the Southeast United States

Soil organic carbon (SOC) can be increased by cultivating bioenergy crops to produce low-carbon fuels, improving soil quality and agricultural productivity. This study evaluates the incentives for farmers to sequester SOC by adopting a bioenergy crop, carinata. Two agricultural management scenarios – business as usual (BaU) and a climate-smart (no-till) practice – were simulated using an agent-based modeling approach to account for farmers’ carinata adoption rates within their context of traditional crop rotations, the associated profitability, influences of neighboring farmers, as well as their individual attitudes. Here, using the state of Georgia, US, as a case study, the results show that farmers allocated 1056 × 10 3 acres (23.8%; 2.47 acres is equivalent to 1 ha) of farmlands by 2050 at a contract price of $\$6.5$ per bushel of carinata seeds and with an incentive of $50Mg -1 CO2e SOC sequestered under the BaU scenario. In contrast, at the same contract price and SOC incentive rate, farmers allocated 1152 × 10 3 acres (25.9%) of land under the no-till scenario, while the SOC sequestration was 483.83 × 10 3 Mg CO2e, which is nearly four times the amount under the BaU scenario. Thus, this study demonstrated combinations of seed prices and SOC incentives that encourage farmers to adopt carinata with climate-smart practices to attain higher SOC sequestration benefits.

54 ENVIRONMENTAL SCIENCES↗

Small-Angle X-ray Scattering and Single-Molecule FRET Spectroscopy Produce Highly Divergent Views of the Low-Denaturant Unfolded State

The results of more than a dozen single-molecule Foerster resonance energy transfer (smFRET) experiments suggest that chemically unfolded polypeptides invariably collapse from an expanded random coil to more compact dimensions as the denaturant concentration is reduced. In sharp contrast, small-angle X-ray scattering (SAXS) studies suggest that, at least for single-domain proteins at non-zero denaturant concentrations, such compaction may be rare. Here, we explore this discrepancy by studying protein L, a protein previously studied by SAXS (at 5 C), which suggested fixed unfolded-state dimensions from 1.4 to 5 M guanidine hydrochloride (GuHCl), and by smFRET (at 25 C), which suggested that, in contrast, the chain contracts by 15-30% over this same denaturant range. Repeating the earlier SAXS study under the same conditions employed in the smFRET studies, we observe little, if any, evidence that the unfolded state of protein L contracts as the concentration of GuHCl is reduced. For example, scattering profiles (and thus the shape and dimensions) collected within {approx} 4 ms after dilution to as low as 0.67 M GuHCl are effectively indistinguishable from those observed at equilibrium at higher denaturant. Our results thus argue that the disagreement between SAXS and smFRET is statistically significant and that the experimental evidence in favor of obligate polypeptide collapse at low denaturant cannot be considered conclusive yet.

59 BASIC BIOLOGICAL SCIENCES↗

Lanthanide (III) addition of [Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sup 2-} (Ln=Eu, Dy)

The reactions of LnCl{sub 3}.6H{sub 2}O (Ln=Eu or Dy) and Na{sub 2}[Mo{sub 2}O{sub 3}S(HNTA){sub 2}].6H{sub 2}O afford Na[Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sub 2}.Eu(H{sub 2}O){sub 9}.3H{sub 2}O (1) (NTA=nitrilotriacetate) and Na{l_brace}(H{sub 2}O){sub 6}Dy[Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sub 2}{r_brace}.7.5H{sub 2}O (2), respectively. The [Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sup 2-} cluster units of 1 are interconnected by Na{sup +} into a 3-D open framework with rutile topology templated by Eu(H{sub 2}O){sub 9}{sup 3+}. The coordination of [Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sup 2-} to the slightly smaller Dy{sup 3+} ion of greater ionic potential as a consequence of lanthanide contraction has been observed to form the pentanuclear heterometallic {l_brace}Dy(H{sub 2}O){sub 6}[Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sub 2}{r_brace}{sup -}, which is linked by Na{sup +} and hydrogen bonds between the protonated carboxylate groups into a 3-D supramolecular framework. The weak antiferromagnetic interactions between the Dy{sup 3+} ions of 2 have been observed. - Graphical abstract: The reactions of LnCl{sub 3} and Na{sub 2}[Mo{sub 2}O{sub 3}S(HNTA){sub 2}] result in the 3-D open framework of Na[Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sub 2} templated by Eu(H{sub 2}O){sub 9}{sup 3+} (1) and the pentanuclear heterometallic cluster Na{l_brace}(H{sub 2}O){sub 6}Dy[Mo{sub 2}O{sub 3}S(HNTA){sub 2}]{sub 2}{r_brace} (2) as a consequence of lanthanide contraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new series of lanthanoid containing Keggin-type germanotungstates with acetate chelators: [{l_brace}Ln(CH{sub 3}COO)GeW{sub 11}O{sub 39}(H{sub 2}O){r_brace}{sub 2}]{sup 12-} {l_brace}Ln=Eu{sup III}, Gd{sup III}, Tb{sup III}, Dy{sup III}, Ho{sup III}, Er{sup III}, Tm{sup III}, and Yb{sup III{r_brace}}

A series of head-on complexes of lanthanoid containing germanotungstates was isolated from a one pot reaction in an acetate buffer at pH 4.5. This convenient approach brought forward the [{l_brace}Ln(CH{sub 3}COO)GeW{sub 11}O{sub 39}(H{sub 2}O){r_brace}{sub 2}]{sup 12-} (Ln=Eu{sup III}, Gd{sup III}, Tb{sup III}, Dy{sup III}, Ho{sup III}, Er{sup III}, Tm{sup III}, and Yb{sup III}) family with acetate chelators in the rarely observed {mu}{sub 2}: {eta}{sup 2}-{eta}{sup 1} mode. All compounds were structurally characterized using various solid state analytics, such as single crystal X-ray diffraction, FT-IR spectroscopy, and thermogravimetric analysis. The isostructural polyanions crystallize in the monoclinic system (S.G. P2{sub 1}/c). Temperature-dependent magnetic susceptibility measurements were performed on the Gd{sup III}-complex which exhibits near perfect Curie-type behavior. -- Graphical abstract: A new series of acetate-chelated lanthanoid containing germanotungstates [{l_brace}Ln(CH{sub 3}COO)GeW{sub 11}O{sub 39}(H{sub 2}O){r_brace}{sub 2}]{sup 12-} (Ln=Eu to Yb) is available from a convenient one-pot reaction. The influence of the lanthanide contraction on the structural properties is discussed and the magnetic properties of the Gd-representative are investigated in detail. Display Omitted Research Highlights: {yields}Lanthanoid containing germanotungstates with acetate chelators in {mu}{sub 2} : {eta}{sup 2}-{eta}{sup 1} mode. {yields}Lanthanoid contraction in [{l_brace}Ln(CH{sub 3}COO)GeW{sub 11}O{sub 39}(H{sub 2}O){r_brace}{sub 2}]{sup 12-} (Ln=Eu{sup III}-Yb{sup III}). {yields}Facile one-pot synthesis of the lanthanoid containing germanotungstate series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal low spin-high spin equilibrium of Fe(II) in thiospinels CuFe{sub 0.5}(Sn{sub (1-x)}Ti{sub x}){sub 1.5}S{sub 4} (0{<=}x{<=}1)

A series of spinel compounds with composition CuFe{sub 0.5}(Sn{sub (1-x)}Ti{sub x}){sub 1.5}S{sub 4} (0{<=}x{<=}1) is analysed by X-ray diffraction, measurements of magnetic susceptibilities and {sup 57}Fe Moessbauer spectroscopy. All samples show a temperature-dependent equilibrium between an electronic low spin 3d(t{sub 2g}){sup 6}(e{sub g}){sup 0} and a high spin 3d(t{sub 2g}){sup 4}(e{sub g}){sup 2} state of the Fe(II) ions. The spin crossover is of the continuous type and extends over several hundred degrees in all samples. The Sn/Ti ratio influences the thermal equilibrium between the two spin states. Substitution of Sn(IV) by the smaller Ti(IV) ions leads to a more compact crystal lattice, which, in contrast to many metal-organic Fe(II) complexes, does not stabilise the low spin state, but increases the residual high spin fraction for T{yields}0 K. The role played by antiferromagnetic spin coupling in the stabilisation of the high spin state is discussed. The results are compared with model calculations treating the effect of magnetic interactions on spin state equilibria. -- Graphical Abstract: Comparison of fractions of high spin Fe(II) from Moessbauer spectra (circles) with plots of {chi}{sub m}T (dots) versus T. Discrepancies between both methods indicate anti-ferromagnetic spin coupling. Display Omitted Research highlights: {yields} Many Fe(II) complexes show thermally induced high spin-low spin crossover. {yields} Spin crossover in spinel compounds is extremely scarce. {yields} Usually, lattice contraction favours the low spin state in Fe(II) complexes. {yields} In these spinels, lattice contraction favours the high spin state. {yields} The stabilisation of the high spin state is explained by spin-spin interactions.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and thermal properties of a novel cubic ZrW{sub 1.80}V{sub 0.20}O{sub 7.90} solid solution

Tetragonal ZrW{sub 1.80}V{sub 0.20}O{sub 6.90}(OH){sub 2.00}(H{sub 2}O){sub 2.00} hydrate was prepared using an acidic steam hydrothermal (ASH) method. Thermal dehydration followed by phase transformation of this precursor leads to successful synthesis of a novel W-site low-valent substituted cubic ZrW{sub 1.80}V{sub 0.20}O{sub 7.90} solid solution, the mechanism of this process is studied in detail revealing the hydrate and a metastable orthorhombic phase of V'{sub W}substitution solid solution as important intermediate product. This material is found to possess thermal contraction and order-disorder phase transformation properties similar to that of the cubic ZrW{sub 2}O{sub 8}. -- Graphical Abstract: A novel cubic ZrW{sub 1.80}V{sub 0.20}O{sub 7.90} solid solution (a) was synthesized through its metastable orthorhombic phase (b) as the dehydration product of hydrate precursor ZrW{sub 1.80}V{sub 0.20}O{sub 6.90}(OH){sub 2.00}(H{sub 2}O){sub 2.00} (c). Display Omitted Highlights: {yields} The details of ZrW{sub 1.80}V{sub 0.20}O{sub 6.90}(OH){sub 2.00}(H{sub 2}O){sub 2.00} dehydration process is revealed. {yields} V{sup 5+} remaining a substitution state is crucial to the formation of c-ZrW{sub 1.80}V{sub 0.20}O{sub 7.90}. {yields} Synthesis of a novel aliovalent W-site substituted cubic ZrW{sub 1.80}V{sub 0.20}O{sub 7.90} was achieved. {yields} Phase transition temperature and thermal contraction were determined for c-ZrW{sub 1.80}V{sub 0.20}O{sub 7.90}.

36 MATERIALS SCIENCE↗

The structural response of gadolinium phosphate to pressure

Accurate elastic constants for gadolinium phosphate (GdPO{sub 4}) have been measured by single-crystal high-pressure diffraction methods. The bulk modulus of GdPO{sub 4} determined under hydrostatic conditions, 128.1(8) GPa (K′=5.8(2)), is markedly different from that obtained with GdPO{sub 4} under non-hydrostatic conditions (160(2) GPa), which indicates the importance of shear stresses on the elastic response of this phosphate. High pressure Raman and diffraction analysis indicate that the PO{sub 4} tetrahedra behave as rigid units in response to pressure and that contraction of the GdPO{sub 4} structure is facilitated by bending/twisting of the Gd–O–P links that result in increased distortion in the GdO{sub 9} polyhedra. - Graphical abstract: A high-pressure single crystal diffraction study of GdPO{sub 4} with the monazite structure is presented. The elastic behaviour of rare-earth phosphates are believed to be sensitive to shear forces. The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. Compression of the structure is facilitated by bending/twisting of the Gd−O−P links that result in increased distortion in the GdO{sub 9} polyhedra. Display Omitted - Highlights: • The elastic responses of rare-earth phosphates are sensitive to shear forces. • The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. • Twisting of the inter-polyhedral links allows compression of the GdPO{sub 4} structure. • Changes to the GdO{sub 9} polyhedra occur in response to pressure (<7.0 GPa).

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of the hexagonal anti-perovskite Na{sub 2}CaVO{sub 4}F

The structural details of the ordered hexagonal oxyfluoride Na{sub 2}CaVO{sub 4}F prepared by solid-state synthesis using stoichiometric amounts of V{sub 2}O{sub 5}, CaCO{sub 3}, Na{sub 2}CO{sub 3} and NaF were characterized using high-resolution neutron powder diffraction. The structural changes between 25 °C and 750 °C revealed that the two structural subunits in this material behave different when heated: there is an expansion of the face-shared FNa{sub 4}Ca{sub 2} octahedra while the VO{sub 4} tetrahedra due to increased thermal disorder reveal marginal bond contractions. Bond valences and the global instability index point to significant structural disorder at 750 °C. - Graphical abstract: The structure of the novel oxyfluoride Na{sub 2}CaVO{sub 4}F is studied at room temperature and high-temperatures. The structure can be viewed as layers of compression and elongation of polyhedral subunits, which change as a function of temperature. - Highlights: • The novel oxyfluoride, Na{sub 2}CaVO{sub 4}F, is synthesized via solid-state method. • High-resolution neutron diffraction data is used to analyze the structure of Na{sub 2}CaVO{sub 4}F. • Structural subunits exhibit expansion and contraction with increasing temperature. • Higher temperatures increase instability within the structure of Na{sub 2}CaVO{sub 4}F.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature synthesis of LnOF rare-earth oxyfluorides through reaction of the oxides with PTFE

Highlights: Black-Right-Pointing-Pointer Low temperature synthesis of LnOF rare-earth oxyfluorides from Ln{sub 2}O{sub 3} and PTFE (CF{sub 2}). Black-Right-Pointing-Pointer Rhombohedral LnOF is the major phase and forms as nanocrystals, 29-103 nm. Black-Right-Pointing-Pointer Expected lanthanide contraction observed in lattice parameters and bond lengths. Black-Right-Pointing-Pointer TbOF orders antiferromagnetically at 10 K and has a metamagnetic transition at 1.8 T. Black-Right-Pointing-Pointer GdOF orders antiferromagnetically at 5 K, other LnOF are paramagnetic. -- Abstract: A low temperature solid-state synthesis route, employing polytetrafluoroethylene (PTFE) and the rare-earth oxides, for the formation of the LnOF rare-earth oxyfluorides (Ln = Y, La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er), is reported. With the exception of LaOF, which forms in a tetragonal variant, rhomobohedral LnOF is found to be the major product of the reaction. In the case of PrOF, a transition from the rhombohedral to the cubic fluorite phase is observed on heating in air to 500 Degree-Sign C. X-ray diffraction shows the expected lanthanide contraction in the lattice parameters and bond lengths. Magnetic susceptibility measurements show antiferromagnetic-like ordering in TbOF, T{sub m} = 10 K, with a metamagnetic transition at a field {mu}{sub 0}H{sub t} = 1.8 T at 2 K. An antiferromagnetic transition, T{sub N} = 4 K, is observed in GdOF. Paramagnetic behavior is observed above 2 K in PrOF, NdOF, DyOF, HoOF and ErOF. The magnetic susceptibility of EuOF is characteristic of Van Vleck paramagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Negative thermal expansion correlated with polyhedral movements and distortions in orthorhombic Y{sub 2}Mo{sub 3}O{sub 12}

Graphical abstract: Our work confirms the negative thermal expansion (NTE) behavior of the orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} in this range 0–1000 K. The orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} has an open framework structure where MoO{sub 4} tetrahedra and YO{sub 6} octahedra are connected by oxygen atoms. The previous mechanisms for the NTE behavior of orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} are that the translational mode (see (b)) of the O bridge atoms in Y-O-Mo linkages will cause the linkages to be bent, reducing the space between polyhedra and making the volumetric shrinkage. Furthermore, the internal polyhedral distortions have been reported experimentally. It is necessary to reveal the relationship between NTE and polyhedral movements, distortions. From the vibrational properties, we get that the different vibrational eigenvectors of oxygen atoms relative to Y or Mo atoms can lead internal polyhedra to distort unevenly (see (c)). Herein, an extended 3D model of the connected unit YO{sub 6}-MoO{sub 4} based on the Y-O-Mo linkage is proposed (see (a)). It presents a simultaneous dynamic process, i.e. the YO{sub 6} octahedra and MoO{sub 4} tetrahedra distort unevenly, along with both polyhedra being closer which makes the volumetric contraction. This model is helpful to improve the mechanisms of NTE and may be applied in the whole A{sub 2}M{sub 3}O{sub 12} family. - Highlights: • The NTE properties of Y{sub 2}Mo{sub 3}O{sub 12} are confirmed using a first-principles calculation. • The optical branch with the lowest frequency is most responsible for the NTE. • The relationship between NTE and polyhedral movements, distortions is elucidated. • An extended 3D model of the connected unit YO{sub 6}-MoO{sub 4} is proposed. - Abstract: The internal polyhedral distortions have been reported experimentally in orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} as a negative thermal expansion (NTE) material. To reveal the relationship between NTE and polyhedral movements, distortions, the vibrational properties of Y{sub 2}Mo{sub 3}O{sub 12} have been studied using first-principles calculations. The lowest optical branch corresponding to translational mode of the O bridge atom in Y-O-Mo linkage has the largest negative Grüneisen parameter and therefore contributes most to the NTE behavior. The different vibrational eigenvectors of oxygen atoms relative to Y or Mo atoms can cause internal polyhedral to distort unevenly. Herein, an extended 3D model of the connected unit YO{sub 6}-MoO{sub 4} based on the Y-O-Mo linkage presents a simultaneous dynamic process, i.e. the YO{sub 6} octahedra and MoO{sub 4} tetrahedra distort unevenly, along with both polyhedra being closer which makes the volumetric contraction. This model is helpful to improve the mechanisms of NTE and may be applied in the whole A{sub 2}M{sub 3}O{sub 12} family.

36 MATERIALS SCIENCE↗