Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Commonality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

North American Megadroughts in the Common Era: Reconstructions and Simulations

During the Medieval Climate Anomaly (MCA), Western North America experienced episodes of intense aridity that persisted for multiple decades or longer. These megadroughts are well documented in many proxy records, but the causal mechanisms are poorly understood. General circulation models (GCMs) simulate megadroughts, but do not reproduce the temporal clustering of events during the MCA, suggesting they are not caused by the time history of volcanic or solar forcing. Instead, GCMs generate megadroughts through (1) internal atmospheric variability, (2) sea-surface temperatures, and (3) land surface and dust aerosol feedbacks. While no hypothesis has been definitively rejected, and no GCM has accurately reproduced all features (e.g., timing, duration, and extent) of any specific megadrought, their persistence suggests a role for processes that impart memory to the climate system (land surface and ocean dynamics). Over the 21st century, GCMs project an increase in the risk of megadrought occurrence through greenhouse gas forced reductions in precipitation and increases in evaporative demand. This drying is robust across models and multiple drought indicators, but major uncertainties still need to be resolved. These include the potential moderation of vegetation evaporative losses at higher atmospheric [CO2], variations in land surface model complexity, and decadal to multidecadal modes of natural climate variability that could delay or advance onset of aridification over the the next several decades. Because future droughts will arise from both natural variability and greenhouse gas forced trends in hydroclimate, improving our understanding of the natural drivers of persistent multidecadal megadroughts should be a major research priority.

atmospheric temperature↗
NASA NTRS2015

Radiation Test Results for Common CubeSat Microcontrollers and Microprocessors

SEL, SEU, and TID results are presented for microcontrollers and microprocessors of interest for small satellite systems such as the TI MSP430F1611, MSP430F1612 and MSP430FR5739, Microchip PIC24F256GA110 and dsPIC33FJ256GP710, Atmel AT91SAM9G20, and Intel Atom E620T, and the Qualcomm Snapdragon APQ8064.

Guertin, Steven M.↗
NASA NTRS2017

Upgrades to Common Data Acquisition System Software Development for NASA's Rocket Propulsion Test Facilities and Software Reuse

Approximately five years ago, the National Aeronautics and Space Administration (NASA) Stennis Space Center (SSC) resumed operation of its large rocket engine test facilities after thirty years of contractor control. During this period, contactors used their own proprietary Data Acquisition System (DAS) to record and process rocket propulsion test data. The transition from a contractor managed facility to a NASA managed facility posed a difficult challenge. In order to support the commercial space launch initiative, SSC needed to develop a software replacement for the contractor proprietary DAS. This replacement software would enable SSC to operate propulsion test facilities more cost effectively and to be more readily able to adapt software for reuse, while at the same time provide internal and external customers with reliable population test data. Therefore, SSC developed in-house, a non-proprietary software suite of applications to replace the previously used proprietary DAS. The requirements for the DAS suite included recording and processing propulsion test data. This capability eliminates the necessity for customers to provide a DAS or rely on a competitor's DAS. An additional benefit of owning the software suite included enabling the ability to add additional features and functionality at a lower cost. The Rocket Propulsion Test (RPT) Program Office reviewed consideration for funding this project with the caveat that development of the software included availability for use with minimal modifications to all SSC test facilities and RPT centers: Marshall Space Flight Center (MSFC), White Sands Test Facility (WSTF), and Glenn Research Center (GRC) Plum Brook Station. Based upon this guideline, SSC created the NASA Data Acquisition System (NDAS) software suite. The ability to use the software at multiple centers, even though each field center uses differing DAS hardware with different capabilities, drove a requirement that the software design be portable with minimal modifications to the software. Then, with software release requirements, evaluations, and approvals completed, the NDAS software suite could also become available to other government agencies, corporations, universities, and the general United States public.

Herbert, Phillip W., Sr.↗
NASA NTRS2018

Broadband, Common-Path, Interferometric Wavefront Sensor

Hybrid sensors comprising Shack-Hartmann Wavefront Sensor (S-HWFS) and Zernike Wavefront Sensor (Z-WFS) capabilities are presented. The hybrid sensor includes a Z-WFS optically arranged in-line with a S-HWFS such that the combined wavefront sensor operates across a wide dynamic range and noise conditions. The Z-WFS may include the ability to introduce a dynamic phase shift in both transmissive and reflective modes.

Wallace, James Kent↗
NASA NTRS2018

Robotics Platforms Incorporating Manipulators Having Common Joint Designs

Manipulators in accordance with various embodiments of the invention can be utilized to implement statically stable robots capable of both dexterous manipulation and versatile mobility. Manipulators in accordance with one embodiment of the invention include: an azimuth actuator; three elbow joints that each include two actuators that are offset to allow greater than 360 degree rotation of each joint; a first connecting structure that connects the azimuth actuator and a first of the three elbow joints; a second connecting structure that connects the first elbow joint and a second of the three elbow joints; a third connecting structure that connects the second elbow joint to a third of the three elbow joints; and an end-effector interface connected to the third of the three elbow joints.

Kennedy, Brett A.↗
NASA NTRS2018

Aerothermal Design of a Common Probe for Multiple Planetary Destinations

The idea of a single design of a capsule, for atmospheric entry at Venus, Jupiter, Saturn, Uranus, and Neptune and delivery of payloads for in situ scientific experiments, is currently being pursued by a team of scientists and engineers drawn from four NASA centers - Ames, Langley, JPL, and Goddard. For notional suites of instruments (the selection depending on the destination), interplanetary trajectories have been developed by team members at JPL and Goddard. Using the entry states provided by these trajectories, 3DOF atmospheric flight trajectories have been developed by Langley [4] and Ames. The range of entry flight path angles for each destination is chosen such that the deceleration load lies between 50 g (shallow) and 150-200 g (steep) for a 1.5 m (diameter) rigid aeroshell based on a 45deg sphere-cone geometry and an entry mass of 400 kg.

Allen Jr., G. A.↗
NASA NTRS2018

A Reconstruction of Global Hydroclimate and Dynamical Variables Over the Common Era

Hydroclimate extremes critically affect human and natural systems, but there remain many unanswered questions about their causes and how to interpret their dynamics in the past and in climate change projections. These uncertainties are due, in part, to the lack of long-term, spatially resolved hydroclimate reconstructions and information on the underlying physical drivers for many regions. Here we present the first global reconstructions of hydroclimate and associated climate dynamical variables over the past two thousand years. We use a data assimilation approach tailored to reconstruct hydroclimate that optimally combines 2,978 paleoclimate proxy-data time series with the physical constraints of an atmosphere?ocean climate model. The global reconstructions are annually or seasonally resolved and include two spatiotemporal drought indices, near-surface air temperature, an index of North Atlantic variability, the location of the intertropical convergence zone, and monthly Nino indices. This database, called the Paleo Hydrodynamics Data Assimilation product (PHYDA), will provide a critical new platform for investigating the causes of past climate variability and extremes, while informing interpretations of future hydroclimate projections.

Natural hazards↗
NASA NTRS2018

Cumulative Distribution of Ballistic Impact Failures of Common Twisted-Pair Data Cables at Orbital Speeds

Data wire cable runs are a significant presence on the exterior of the International Space Station (ISS), and continued ISS mission support requires detailed assessment of cables due to micrometeoroid and orbit debris (MMOD) impact. These data wire cables are twisted-pair cables consisting of two 22AWG stranded conductors and fillers inside a tight fitting braided copper shield. The copper shield and its contents are covered with a jacket that has a nominal outer diameter of 3.76 mm and beta-cloth tape. The ISS engineering community has identified two loss-of-function mechanisms for these cables: open circuits due to severed conductors within the cable, and short circuits due to contact between conductors or grounded components. As these data cables are low power systems, short circuits are not expected to burn away the contact, so both open and short circuits are considered permanent loss-of-function for the cable. A total of ninety-seven impact experiments have been performed into these cables to develop a statistical model for the failure of these cables to be used in reliability studies. The experimental work has yielded cumulative distribution functions for these cables for steel and aluminum components of the orbital debris environment at representative speeds and impact obliquities.

Miller, Joshua E.↗
NASA NTRS2018

Aerothermal Design of a Common Probe for Multiple Planetary Destinations

Estimate the mass of the Thermal Protection System (TPS) for a single design construct of an atmospheric entry probe with a rigid aeroshell, which could be used at five destinations, i.e. Venus, Saturn, Uranus, Neptune, and perhaps, Jupiter. The entry mass of the probe is 400 kg with a ballistic coefficient of 216 kg/m2. Process: The 3DoF trajectory simulation program Traj, coupled with the TPS response program FIAT was used for simulation and design. The assumed atmospheric models were VIRA (Venus-GRAM) for Venus, the Julianne Moses' model for Saturn, a NASA Ames engineering model for Uranus, Neptune-GRAM for Neptune, and Galileo Probe (Al Seiff's) result for Jupiter.

Allen, Gary A., Jr.↗
NASA NTRS2018

NASA's GeneLab: An Integrated Omics Data Commons and Workbench

GeneLab (http://genelab.nasa.gov) is a NASA initiative designed to accelerate “open science” biomedical research in support of the human exploration of space and the improvement of life on earth. The GeneLab Data Systems (GLDS) were developed to help investigators corroborate findings from “omics” (genomics, transcriptomics, proteomics, and metabolomics) assays and translate them into systems biology knowledge and, eventually, therapeutics, including countermeasures to support life in space. Phase I of the project (completed) emphasized developing key capabilities for submission, curation, storage, search, and retrieval of omics data from biomedical research in and of space environments. The development focus for Phase II (completed) was federated data search and retrieval of these kinds of data from other open-access repositories. The last phase of the project (in work) entails developing an omics analysis tool set, and a portal to visualize processed omics data, emphasizing integration with the data repository and search functions developed during the prior phases. The final product will be an open-access system where users can individually or collaboratively publish, search, integrate, analyze, and visualize omics data.

genome↗
NASA NTRS2018

NASA's GeneLab: An Integrated Omics Data Commons and Workbench

GeneLab (http://genelab.nasa.gov) is a NASA initiative designed to accelerate "open science" biomedical research in support of the human exploration of space and the improvement of life on earth. The GeneLab Data Systems (GLDS) were developed to help investigators corroborate findings from "omics" (genomics, transcriptomics, proteomics, and metabolomics) assays and translate them into systems biology knowledge and, eventually, therapeutics, including countermeasures to support life in space. Phase I of the project (completed) emphasized developing key capabilities for submission, curation, storage, search, and retrieval of omics data from biomedical research in and of space environments. The development focus for Phase II (completed) was federated data search and retrieval of these kinds of data from other open-access repositories. The last phase of the project (in work) entails developing an omics analysis tool set, and a portal to visualize processed omics data, emphasizing integration with the data repository and search functions developed during the prior phases. The final product will be an open-access system where users can individually or collaboratively publish, search, integrate, analyze, and visualize omics data.

genome↗
NASA NTRS2017

NASA's GeneLab: An Integrated Omics Data Commons and Workbench

GeneLab (http://genelab.nasa.gov) is a NASA initiative designed to accelerate "open science" biomedical research in support of the human exploration of space and the improvement of life on earth. The GeneLab Data Systems (GLDS) were developed to help investigators corroborate findings from "omics" (genomics, transcriptomics, proteomics, and metabolomics) assays and translate them into systems biology knowledge and, eventually, therapeutics, including countermeasures to support life in space. Phase I of the project (completed) emphasized developing key capabilities for submission, curation, storage, search, and retrieval of omics data from biomedical research in and of space environments. The development focus for Phase II (completed) was federated data search and retrieval of these kinds of data from other open-access repositories. The last phase of the project (in work) entails developing an omics analysis tool set, and a portal to visualize processed omics data, emphasizing integration with the data repository and search functions developed during the prior phases. The final product will be an open-access system where users can individually or collaboratively publish, search, integrate, analyze, and visualize omics data.

Berrios, Daniel C.↗
NASA NTRS2016

Sizing a Common Habitat for Multiple Environments and Mission Durations

A human mission to Mars and other deep space destinations will require a consistent habitation strategy that applies to disparate environments preferably using multiples of identical hardware. The crew will endure high-g forces during launch, microgravity during transit, and various partial gravities on the destination planet, moon, or asteroid. Habitable volume will likely need to be broken up into smaller modules that do not exceed the capacity of launch vehicles and entry-descent-landing technologies. Though it may be possible to design a different unique, optimized habitat for each environment that the crew may encounter, it is more likely that space agencies and other mission sponsors will only have the resources to develop and produce single multi-use hardware that can be used equally well in all environments, with minimal adaptation by the crew. When sizing habitable volume, mission duration and number of crew become important factors to consider. For example, a pressurized rover cabin may only need to support two crew members for a few days at a time, requiring less volume than a habitat that must support the same number of persons for an entire year. In this study the authors consider constraining factors such as launch vehicle capacity, mission duration, crew size, and Mars lander capacity and study how to divide total pressurized volume, subsystems, equipment, consumables, and supplies into multiple manifests. Preference has been given to solutions that use multiples of identical modules over unique optimized volumes. For example at one extreme, can all the habitat pressure vessels, logistic modules, Mars ascent stage cabins, rover cabins, and airlocks be constructed from multiples of the same small-diameter cylindrical modules? On the other extreme, can logistics, habitation volume, mobility, all be enclosed in a single monolithic volume habitat design? Though there may be advantages and disadvantages to either extreme, the conclusion of this study is that most functions can be distilled into two sizes for hardware: multiples of large diameter modules that generally stay in one place, and multiples of smaller volume cabins that can be moved around or function as cockpits for ascent stages, support vehicles, rovers, airlocks, and logistics delivery.

Howe, A Scott↗
NASA NTRS2019

Common Power and Energy Storage Solutions to Support Lunar and Mars Surface Exploration Missions

Future human exploration missions on the moon and Mars will require a new generation of power sources to sustain crew members and leverage in-situ resources. Long-duration human missions to the lunar and Martian surface will likely include large-scale landers, crew habitats, pressurized rovers, and in-situ propellant production plants. The power demands for these surface elements, whether on the moon or Mars, will be similar starting with robotic precursor missions in the multi-kilowatt range scaling to 10s of kilowatts as the crew presence expands and local propellant production is established. While the power requirements may be similar, the vastly different environments on the two surfaces present unique challenges for power generation and storage systems. Candidate technologies to satisfy the surface power needs include deployable solar arrays, regenerative fuel cells, and small fission reactors. This paper presents strategies for power system architectures with elements that can be used on the moon and are extensible to Mars with features that make them resilient to either environment.

Mason, Lee↗