Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collision Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

TH-C-12A-09: Planning and Delivery of the Fully Dynamic Trajectory Modulated Arc Therapy: Application to Accelerated Partial Breast Irradiation

Purpose: A novel trajectory modulated arc therapy (TMAT) system was developed that uses source motion trajectory involving synchronized gantry rotation with translational and rotational couch movement. MLC motion and dose rate were fully optimized for dynamic beam delivery. This work presents a platform for planning deliverable TMAT on a collision free coronal trajectory and evaluates its benefit for accelerated partial breast irradiation (APBI) in a prone position. Methods: The TMAT algorithm was built on VMAT with modifications (physical properties on couch movement were defined) and enhancements (pencil beam dose calculation engine to support extended SSDs) to make it feasible for TMAT delivery. A Matlab software environment for TMAT optimization and dose calculation was created to allow any user specified motion axis. TMAT delivery was implemented on Varian TrueBeamTM STx via XML scripts. 10 prone breast irradiation cases were evaluated in VMAT and compared with a 6- field non-coplanar IMRT plan. Patient selection/exclusion criteria and structure contouring followed the guidelines of NSABP B-39/RTOG 0413 protocol. Results: TMAT delivery time was ∼4.5 minutes. 251.5°±7.88° of non-isocentric couch arc was achieved by the optimized trajectory with 180– 210 control points at 1°–2° couch increments. The improved dose distribution by TMAT was most clearly observed by the marked reduction in the volume of irradiated normal breast tissue in the high dose region. The ratios of the normal breast tissue volume receiving more than 50%, 80% and 100% of the prescription dose for TMAT versus IMRT were: V50%(TMAT/IMRT) = 78.38%±13.03%, V80%(TMAT/IMRT) = 44.19%±9.04% and V100% (TMAT/IMRT) = 9.96%±7.55%, all p≤0.01. Conclusion: The study is the first demonstration of planning and delivery implementation of a fully dynamic APBI TMAT system with continuous couch motion. TMAT achieved significantly improved dosimetry over noncoplanar IMRT on dose volume parameters correlated with toxicity and cosmetic outcome of APBI. This project was supported by Varian Research Grant.

60 APPLIED LIFE SCIENCES↗

Comparative study of quarkonium transport in hot QCD matter

This document summarizes the efforts of the EMMI Rapid Reaction Task Force on “Suppression and (re)generation of quarkonium in heavy-ion collisions at the LHC”, centered around their 2019 and 2022 meetings. It provides a review of existing experimental results and theoretical approaches, including lattice QCD calculations and semiclassical and quantum approaches for the dynamical evolution of quarkonia in the quark-gluon plasma as probed in high-energy heavy-ion collisions. The key ingredients of the transport models are itemized to facilitate comparisons of calculated quantities such as reaction rates, binding energies, and nuclear modification factors. A diagnostic assessment of the various results is attempted and coupled with an outlook for the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ice Multiplication by Fragmentation during Quasi-Spherical Freezing of Raindrops: A Theoretical Investigation

Ice multiplication by fragmentation during collision–freezing of supercooled rain or drizzle is investigated. A zero-dimensional dynamical system describes the time evolution of number densities of supercooled drops and ice crystals in a mixed-phase cloud. The characteristic time scale for this collision–freezing ice fragmentation is controlled by the collision efficiency, the number of ice fragments per freezing event, and the available number concentration of supercooled drops. The rate of the process is proportional to the number of supercooled drops available. Thus, ice may multiply extensively, even when the fragmentation number per freezing event is relatively small. The ratio of total numbers of ice particles to those from the first ice, namely, the “ice-enhancement factor,” is controlled both by the number of fragments per freezing event and by the available number concentration of supercooled drops in a similar manner. Especially, when ice fragmentation by freezing of supercooled drops is considered in isolation, the number of originally existing supercooled drops multiplied by the fragmentation number per freezing event yields the eventual number of ice crystals. When supercooled drops are continuously generated by coalescence, ice crystals from freezing fragmentation also continuously increase asymptotically at a rate equal to the generation rate of supercooled drops multiplied by the fragmentation number per freezing event. All these results are expressed by simple analytical forms, thanks to the simplicity of the theoretical model. These parameters can practically be used as a means for characterizing observed mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗

Surface interactions involved in flashover with high density electronegative gases.

This report examines the interactions involved with flashover along a surface in high density electronegative gases. The focus is on fast ionization processes rather than the later time ionic drift or thermalization of the discharge. A kinetic simulation of the gas and surface is used to examine electron multiplication and includes gas collision, excitation and ionization, and attachment processes, gas photoionization and surface photoemission processes, as well as surface attachment. These rates are then used in a 1.5D fluid ionization wave (streamer) model to study streamer propagation with and without the surface in air and in SF6. The 1.5D model therefore includes rates for all these processes. To get a better estimate for the behavior of the radius we have studied radial expansion of the streamer in air and in SF6. The focus of the modeling is on voltage and field level changes (with and without a surface) rather than secondary effects, such as, velocities or changes in discharge path. An experiment has been set up to carry out measurements of threshold voltages, streamer velocities, and other discharge characteristics. This setup includes both electrical and photographic diagnostics (streak and framing cameras). We have observed little change in critical field levels (where avalanche multiplication sets in) in the gas alone versus with the surface. Comparisons between model calculations and experimental measurements are in agreement with this. We have examined streamer sustaining fields (field which maintains ionization wave propagation) in the gas and on the surface. Agreement of the gas levels with available literature is good and agreement between experiment and calculation is good also. Model calculations do not indicate much difference between the gas alone versus the surface levels. Experiments have identified differences in velocity between streamers on the surface and in the gas alone (the surface values being larger).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Top-quark production at hadron colliders

Inclusive and differential measurements of the $t\bar{t}$ production cross-section are presented including data from proton-antiproton (Tevatron collider) and proton-proton (LHC) collisions at various centre-of-mass energies. In addition, measurements of the $t\bar{t}$+ vector boson production rates are presented, which were carried out at ATLAS and CMS. All results are in good agreement with theoretical predictions from Standard Model calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Source and loss processes of protons of the inner radiation belt.

The adequacy of the known source and loss processes to populate the inner radiation belt with protons is examined by calculating the equilibrium trapped-proton distribution, which would result from decay of albedo neutrons, energy-loss collisions, and radial diffusion by changes in the third adiabatic invariant. The strength of the neutron source and the rates of atmospheric energy loss are obtained from available theoretical and experimental data, and the radial-diffusion coefficient is adjusted to give agreement between theory and experiment for equatorially trapped protons with first invariants between 200 and 3000 MeV gauss. The flux intensities, energy spectrums, and radial distributions obtained by the theory are in good agreement with observations, and the radial diffusion coefficient required is consistent with dif*usion coefficients derived by a variety of other methods.-

Farley, T. A.↗

On the tearing mode in quasi-neutral sheets

The paper examines the stability of the tearing mode in a quasi-neutral sheet which contains electron pitch angle scattering wave turbulence (or collisions). It is found that the pitch angle scattering dissipation destabilizes the tearing mode and that the tearing growth rate is proportional to the pitch angle diffusion coefficient. The results are discussed with reference to theories of the plasma sheet.

Coroniti, F. V.↗

Studies of warm-rain development

The development of rain in warm (over 0 C) clouds due to the combined effects of condensation and coalescence following collisions is discussed. The detailed shape of the size distribution produced by condensation has a controlling influence on the rate of coalescence, and this shape is affected by entrainment of dry air, mixing of various cloud parcels, and radiative effects. Aspects of these processes in cloud types where rain formed through warm-rain processes are reviewed. Results suggest that diffusional growth may be enhanced in highly mixed regions of maritime cumulus in a manner similar to that in wave clouds, but that this effect is minor in updraft cores or in the stratocumulus layers examined.

Cooper, William A.↗

Multiparameter radar study of a microburst - Comparison with model results

Radar observations and model results are used to investigate the microphysical evolution of an isolated, intense storm observed on July 20, 1988 during the Microburst and Severe Thunderstorm experiment. The storm grew to a height of 14 km and upon collapsing, produced heavy rain, pea-sized hail, and a microburst at the surface. The radar observations indicate that the initial precipitation development was by collision-coalescence. As the storm intensified, accretional growth became dominant leading to rapid precipitation development. Radar-derived rainfall rates peaked around 150 to 190 mm/h. Each morning during the experiment, a two-dimensional, time-dependent cloud model, initialized with the morning sounding, was run. The model results from the July 20 sounding are compared to the radar observations. Good agreement is shown in some aspects of the storm development, although the numerical simulation predicted a more vigorous storm than actually developed.

Tuttle, John D.↗

A post-core-collapse model for the nucleus of M33

A model for the post-collapse core of M33 is proposed. By analogy with globular clusters, the formation of tight binary systems powers the reexpansion of the core, and it is expected that low-mass X-ray binaries form at a rate about equal to that of all galactic globular clusters combined. About a dozen such binaries should be present, and their combined emission may explain the large and enigmatic unresolved X-ray emission from the nucleus of M33. In addition, tidal formation of cataclysmic binaries may lead to a nova rate of more than about one per century. Numerous blue stragglers have probably formed through mergers caused by stellar collisions, but their density is probably too low to explain the blue color of the nucleus. Young stars are the likely cause for the color, and their presence may complicate the simple dynamical picture presented here.

Hernquist, Lars↗

Windblown sand on Venus: The effect of high atmospheric density

The high density of the venusian atmosphere significantly affects aeolian saltation transport and may also allow rapid alterations in the radar backscatter cross-section of the surface. Saltation flux experiments were conducted under terrestrial and simulated venusian conditions to assess the effect of atmospheric density on aeolian transport of sediment. Total lane flux, the vertical distribution of saltating particles, and the average horizontal component of particle speed were measured and used to estimate the volumetric concentration of particles above the surface. Results show that so many particles are set into motion when wind speeds exceed a critical value that mid-air collisions are a common result, a condition termed 'choked' saltation. When choking occurs, there is a reduction in the rate at which the total saltation flux increases with increasing wind speed at least in part due to a reduction in the mean horizontal speed of the particles. Choked saltation on Venus may result in a reduction of the local aeolian erosion rate, the obliteration of aeolian bedforms, and rapid alteration of surface radar backscatter characteristics.

Williams, Steven H.↗

A Review of the Recent NASA Long-Term Orbital Debris Environment Projection and Active Debris Removal Modeling Activities

The NASA Orbital Debris Program Office (ODPO) developed a high fidelity debris evolutionary model, LEGEND (a LEO-to-GEO Environment Debris model), in 2004 to enhance its capability to better model the near-Earth environment. LEGEND can mimic the growth of the historical debris population and project it into the future based on user-defined scenarios. The first major LEGEND study concluded that even without any future launches, the LEO population would continue to increase due to mutual collisions among existing objects. In reality, the increase will be worse than this prediction because of ongoing satellite launches and unexpected major breakups. Even with a full implementation of the commonly-adopted mitigation measures, the LEO population growth is inevitable. To preserve the near-Earth environment for future generations, active debris removal (ADR) must be considered. A follow-up LEGEND ADR study was completed recently. The main results indicate that (1) the mass and collision probability of each object can be used to establish an effective removal selection criterion and (2) a removal rate of ~5 objects per year is sufficient to stabilize the LEO environment. Due to the limitation of removal techniques, however, different target selection criteria (in size, altitude, inclination, etc.) may be more practical. A careful evaluation of the effectiveness of different proposed techniques must be carried out to maximize the long-term benefit to the environment.

Liou, J.C.↗

An Update on the Effectiveness of Postmission Disposal in LEO

The commonly‐adopted orbital debris mitigation measures were developed to reduce the growth of the future debris population. A major component in debris mitigation is post-mission disposal (PMD). The key PMD element for LEO satellites is the 25‐year rule. It is intended to limit the long‐term presence of rocket bodies (R/Bs) and spacecraft (S/C), as well as mission-related debris, in the environment. The effectiveness of PMD has been demonstrated and documented since the development of mitigation measures began in the 1990s. This paper summarizes an updated study, based on the current environment, using the NASA LEGEND model. The study focused on the > or = 10 cm population in LEO. The historical simulation covered 1957 through 2011 and followed the recorded launches and known breakup events. The future projection was carried out for 200 years. An eight‐year launch traffic, 2004 - 2011, was repeated during the projection period. An eight‐year mission lifetime was assumed for future S/C. No stationkeeping and no collision avoidance maneuver were implemented. Only objects 10 cm and larger were included in collision consideration. No explosion was allowed for R/Bs and S/C launched after 2011. The 25‐year PMD rule success rates were set at 0%, 10%, 50%, 75%, and 95%, respectively, for the 5 study scenarios. Results of the simulations were analyzed to quantify the differences among the different compliance rates. As expected, the 0% PMD projection followed a rapid and non‐linear increase in the next 200 years. The LEO population, on average, more than tripled at the end of the simulations. With a 50% compliance of the 25‐year rule, the population growth was reduced approximately by half. However, even with a 95% compliance of the 25‐year rule, the LEO debris population would still increase by an average of more than 50% in 200 years. These simulation results provide an updated assessment of the effectiveness of the 25‐year rule. It is the first and the most cost‐effective defense against future population growth. In addition, the results also confirm the instability of the LEO population and lay the foundation for the need to consider environment remediation in the future.

Liou, J.-C.↗

New Perspectives for QCD Physics at the LHC

I review a number of topics where conventional wisdom relevant to hadron physics at the LHC has been challenged. For example, the initial-state and final-state interactions of the quarks and gluons entering perturbative QCD hard-scattering subprocesses lead to the breakdown of traditional concepts of factorization and universality for transverse-momentum-dependent observables at leading twist. These soft-gluon rescattering effect produce single-spin asymmetries, the breakdown of the Lam-Tung relation in Drell-Yan reactions, as well as diffractive deep inelastic scattering, The antishadowing of nuclear structure functions is predicted to depend on the flavor quantum numbers of each quark and antiquark. Isolated hadrons can be produced at large transverse momentum directly within a hard higher-twist QCD subprocess, rather than from jet fragmentation, even at the LHC. Such 'direct' processes can explain the observed deviations from pQCD predictions of the power-law fall-off of inclusive hadron cross sections as well as the 'baryon anomaly' seen in high-centrality heavy-ion collisions at RHIC. The intrinsic charm contribution to the proton structure function at high x can explain the large rate for high p{sub T} photon plus charm-jet events observed at the Tevatron and imply a large production rate for charm and bottom jets at high p{sub T} at the LHC, as well as a novel mechanism for Higgs and Z{sup 0} production at high x{sub F}. The light-front wavefunctions derived in AdS/QCD can be used to calculate jet hadronization at the amplitude level. The elimination of the renormalization scale ambiguity for the QCD coupling using the scheme-independent BLM method will increase the sensitivity of searches for new physics at the LHC. The implications of 'in-hadron condensates' for the QCD contribution to the cosmological constant are also discussed.

43 PARTICLE ACCELERATORS↗

Cold nuclear matter effects in J/(psi) production

Lattice QCD predicts that, above a certain critical energy density or temperature, strongly interacting matter undergoes a phase transition from the hadronic world to a quark-gluon plasma state, where the coloured quarks and gluons are no longer bound to colourless hadrons. The suppression of quarkonium production in high-energy nuclear collisions is one of the most interesting signatures of QGP formation, for two reasons: due to their large masses, charm and beauty quarks are created only in the initial hard scattering processes, before the QGP is formed; and the Q{bar Q} binding potential should be screened in the deconfined colour medium. Until the LHC starts colliding Pb nuclei, charm is the heaviest quark that can check the validity of the finite temperature QCD predictions, given the much smaller beauty production cross sections. However, the interpretation of the presently available results on charmonium suppression in heavy-ion collisions, obtained at the SPS and RHIC, is hampered by a multitude of other 'nuclear effects', which exist even in the absence of QGP formation, such as the badly understood nuclear modifications of the gluon distribution functions, the level of energy lost by the partons traversing the nuclei before producing the Q{bar Q} pair, the rate at which the nascent quarkonium state is broken up by the surrounding nuclear matter, etc. Fortunately, most of these 'cold nuclear matter' effects can be studied on the basis of proton-nucleus measurements. However, care must be taken when converting the p-A observations into a reference baseline that can be used in the analysis of the heavy-ion data. In particular, it has recently been shown [1] that it is wrong to assume that the rate of final-state Glauber-like J/{psi} absorption, usually called the 'J/{psi} absorption cross section', {sigma}{sub abs}{sup J/{psi}}, is independent of the collision energy and of the charmonium kinematics, as was previously assumed in the analysis of the SPS heavy-ion data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Density Plasma Reactors: Simulations for Design

The development of improved and more efficient plasma reactors is a costly process for the semiconductor industry. Until five years ago, the Industry made most of its advancements through a trial and error approach. More recently, the role of computational modeling in the design process has increased. Both conventional computational fluid dynamics (CFD) techniques like Navier-Stokes solvers as well as particle simulation methods are used to model plasma reactor flowfields. However, since high-density plasma reactors generally operate at low gas pressures on the order of 1 to 10 mTorr, a particle simulation may be necessary because of the failure of CFD techniques to model rarefaction effects. The direct simulation Monte Carlo method is the most widely accepted and employed particle simulation tool and has previously been used to investigate plasma reactor flowfields. A plasma DSMC code is currently under development at NASA Ames Research Center with its foundation as the object-oriented parallel Cornell DSMC code, MONACO. The present investigation is a follow up of a neutral flow investigation of the effects of process parameters as well as reactor design on etch rate and etch rate uniformity. The previous work concentrated on silicon etch of a chlorine flow in a configuration typical of electron cyclotron resonance (ECR) or helical resonator type reactors. The effects of the plasma on the dissociation chemistry were modeled by making assumptions about the electron temperature and number density. The electrons or ions themselves were not simulated.The present work extends these results by simulating the charged species.The electromagnetic fields are calculated such that power deposition is modeled self-consistently. Electron impact reactions are modeled along with mechanisms for charge exchange. An bipolar diffusion assumption is made whereby electrons remain tied to the ions. However, the velocities of tile electrons are allowed to be modified during collisions and are not confined to a Maxwellian distribution. The interaction between the neutral flow and plasma is examined, and results for etch rate uniformity from the previous research and the present plasma simulations are compared.

Hash, David B.↗

The effects of the ionization, the recombination, and the collision of the ions to the damping solitary waves in a dusty plasma

By considering the ionization and recombination of the ions, as well as the collision between ions and dust grains, we have studied the damping solitary wave solution in a dusty plasma. In this paper, we find that the damping rate of the solitary wave increases as both the mass and the density of the dust grains increase. However, it decreases as the charge of the dust grain increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytical modeling of operating characteristics of premixing-prevaporizing fuel-air mixing passages. Volume 1: Analysis and results

A model for predicting the distribution of liquid fuel droplets and fuel vapor in premixing-prevaporizing fuel-air mixing passages of the direct injection type is reported. This model consists of three computer programs; a calculation of the two dimensional or axisymmetric air flow field neglecting the effects of fuel; a calculation of the three dimensional fuel droplet trajectories and evaporation rates in a known, moving air flow; a calculation of fuel vapor diffusing into a moving three dimensional air flow with source terms dependent on the droplet evaporation rates. The fuel droplets are treated as individual particle classes each satisfying Newton's law, a heat transfer, and a mass transfer equation. This fuel droplet model treats multicomponent fuels and incorporates the physics required for the treatment of elastic droplet collisions, droplet shattering, droplet coalescence and droplet wall interactions. The vapor diffusion calculation treats three dimensional, gas phase, turbulent diffusion processes. The analysis includes a model for the autoignition of the fuel air mixture based upon the rate of formation of an important intermediate chemical species during the preignition period.

Anderson, O. L.↗