Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CoRe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Modular high temperature gas reactor core modeling with RELAP5-3D/PHISICS – Optimization schemes for load following

The objective of this study is to develop a 3D/NK model to study the load following operation of a Modular High-Temperature Gas-Cooled Reactor (MHTGR). The selected design is the 350 MW prismatic, graphite moderated, helium cooled thermal reactor based on the MHTGR-350 transient benchmark led by the High-Temperature Gas-Cooled Reactor (HTGR) Methods Core Simulation Group at Idaho National Laboratory (INL) in the framework of the Organization for Economic Cooperation and Development Nuclear Energy Agency (OECD/NEA). This kind of reactor usually reacts very slowly to the perturbation of the core parameters due to the large amount of graphite in the core. This kind of behavior promotes the reactor stability but on the other hand limits the reactor load-following operability. Recently advances in gas reactor designs have made load-following in gas reactors a feasible and achievable goal. Modern nuclear reactors (such as the MHTGR-350) are designed to withstand the structural stresses associated with load-following. Operating the reactor in load-following mode will inevitably reduce the load factor. Although a higher load factor means more revenue and the best usage of the fuel, following the variable energy demand will increase the maximum achievable fraction of generated nuclear power, being no more limited to the base load power generation. In general, if low impact on material aging and the safe operability are demonstrated the plant economics will be minimally affected. In order to ensure that the system can be safely operated in a load-following mode an extensively study has been carried out. Some tests with linear coolant mass flow rate change demonstrated that the reactor behavior is suitable for operation in load following mode. This assumption has been confirmed by a 4 days load following transient test in which the reactor supplied the requested power with a negligible error.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Transformational Challenge Reactor preconceptual core design studies

In the nuclear industry, a manufacturing-informed design approach has the potential to yield the most benefit from advanced manufacturing. By leveraging advanced materials, data science, and rapid testing and deployment, manufacturing-informed design can drive down costs and development times, ultimately improving future commercial viability. This approach is being demonstrated in the US Department of Energy Office of Nuclear Energy (DOE-NE) Transformational Challenge Reactor (TCR) program. Preconceptual design activities for TCR have been focused on analyzing and maturing four reactor core design concepts: two fast-spectrum and two thermal-spectrum systems. Furthermore, the designs were iteratively modified and analyzed, and subcomponents were manufactured in parallel over weeks instead of months or years. To meet key program initiatives (e.g., timeline and material use), several constraints—including fissile material availability, component availability, materials compatibility, and additive manufacturing capabilities—were factored into the design effort, yielding small cores less than one cubic meter in volume with near-term viability. Additionally, the TCR program has made significant progress on development of advanced moderator materials such as yttrium hydride, advancing the feasibility of gas-cooled thermal spectrum systems using less than 250 kg of high-assay low enriched uranium (HALEU) and occupying less than 1 m3. Each of the two resulting thermal designs uses a different fuel form: traditional UO2 ceramic fuel and tristructural isotropic (advanced TRISO) fuel particles embedded inside a SiC matrix. Core neutronics and thermal performance for these systems were assessed and summarized. Evaluation of the performance metrics for these two moderated designs has yielded the downselected TCR design: a TRISO-fueled and yttrium hydride moderated gas-cooled reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Neutronic impact of Autonomous Reactivity Control system inclusion in a breed-and-burn core

This work examines the impacts induced in a large breed-and-burn core through the inclusion of Autonomous Reactivity Control (ARC) systems from the neutronics perspective. A combination of numerical and analytical techniques are used to conservatively quantify the reactivity penalty, amount of additional tritium production, and depletion of the system absorber fluid. The reactivity penalty is found to be negligibly small, with the largest impact resulting from the removal of fuel material to make room for the ARC system tubes. Similarly, the depletion of the absorber fluid is found to be negligible compared to the amount of fluid present. It is found that the production of tritium within the active core is also small in comparison to that which is nominally produced, while tritium production within the lower ARC system reservoir may be of concern if not adequately considered during the assembly design phase. This issue is explored and a mitigation technique is proposed. Ultimately this study concludes that there are no issues from the steady-state neutronics perspective preventing incorporation of ARC systems into typical breed-and-burn cores.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Growth and structural transitions of core-shell nanorods in nanocrystalline Al-Ni-Y

Unique nanorod precipitates with a core-shell structure are found to nucleate from the grain boundaries of a bulk nanocrystalline Al-Ni-Y alloy fabricated via powder consolidation, contributing significantly to stabilization and strengthening. The local structure, chemistry, and evolution of these features during annealing are reported here. In the as-consolidated state, the nanorods can be either structurally ordered or disordered, yet a consistent chemical patterning is found where the core is primarily Al plus C while the shell is enriched with Y. As annealing time increases, more nanorods transform to an ordered structure as they coarsen while the core composition remains unchanged. In contrast, the shell chemistry transitions from Y-rich to Ni-rich with longer annealing treatments, most likely due to the different diffusivities of Y and Ni in Al. Furthermore, a spatial and chemical correlation between the nanorods and amorphous complexions is observed, suggesting that these complexions serve as preferential nucleation sites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Core-level binding energy shifts between interior, terrace and edge atoms in MnO(001) thin films

Understanding the physical origin of core-level photoemission line shapes can offer valuable information about the chemical and physical properties of surfaces. For instance, in a large number of transition metals oxides, changes in the line shape allow the accurate determination of their oxidation states and cation site symmetry. Yet, despite this importance, experimental investigations on core-level shifts have been much neglected in recent years. In order to provide further evidence of the physical relevance, we have, in this contribution, introduced a new aspect of interior-, terrace- and edge- atom core-level binding energy shifts to describe monolayers of MnO(001) films grown on an Au(111) substrate. By this means we were able to distinguish the line shape contributions related to different types of atomic sites. Here we show that their relative intensities and energy shifts are able to provide information about the relative amount of under coordinated atoms on the surface and, thus give insights into their catalytic properties. Our findings reveal the importance of a detailed surface science characterization to provide the correct interpretation of distinct photoemission line shapes when considering thin film samples as well as nanostructures in general.

36 MATERIALS SCIENCE↗
DOE OSTI2022

13 C-metabolic flux analysis of Clostridium ljungdahlii illuminates its core metabolism under mixotrophic culture conditions

Carbon dioxide-fixing acetogenic bacteria (acetogens) utilizing the Wood-Ljungdahl Pathway (WLP) play an important role in CO 2 fixation in the biosphere and in the development of biological processes – alone or in cocultures, under both autotrophic and mixotrophic conditions – for production of chemicals and fuels. To date, limited work has been reported in experimentally validating and quantifying reaction fluxes of their core metabolic pathways. Here, the core metabolic model of the acetogen Clostridium ljungdahlii was interrogated using 13 C-metabolic flux analysis ( 13 C-MFA), which required the development of a new defined culture medium. Autotrophic, heterotrophic, and mixotrophic growth in defined medium was possible by adding 1 mM methionine to replace yeast extract. Our 13 C-MFA found an incomplete TCA cycle and inactive core pathways/reactions, notably those of the oxidative pentose phosphate pathway, Entner-Doudoroff pathway, and malate dehydrogenase. 13 C-MFA during mixotrophic growth using the parallel tracers [1– 13 C]fructose, [1,2– 13 C]fructose, [1,2,3– 13 C]fructose, and [U– 13 C]asparagine found that externally supplied CO 2 contributed the majority of carbon consumed. All internally-produced CO 2 from the catabolism of asparagine and fructose was consumed by the WLP. While glycolysis of fructose was active, it was not a major contributor to overall production of ATP, NADH, and acetyl-CoA. Gluconeogenic reactions were active despite the availability of organic carbon. Asparagine was catabolized equally via conversion to threonine and subsequent cleavage to produce acetaldehyde and glycine, and via deamination to fumarate and then the anaplerotic conversion of malate to pyruvate. Both pathways for asparagine catabolism produced acetyl-CoA, either directly via pyruvate or indirectly via the WLP. Cofactor stoichiometry based on our data predicted an essentially zero flux through the ferredoxin-dependent transhydrogenase (Nfn) reaction. Instead, nearly all of NADPH generated from the hydrogenase reaction was consumed by the WLP. Reduced ferredoxin produced by the hydrogenase reaction and glycolysis was mostly used for ATP generation via the RNF/ATPase system, with the remainder consumed by the WLP. NADH produced by RNF/ATPase was entirely consumed via the WLP.

13C metabolic flux analysis↗
DOE OSTI2019

Large-Scale and Galvanic Replacement Free Synthesis of Cu@Ag Core–Shell Nanowires for Flexible Electronics

Copper nanowires (CuNWs) are considered a promising alternative to indium tin oxide (ITO) due to their high transparency, conductivity and low cost. However, the susceptibility to oxidation of copper in ambient conditions largely overshadows their practical applications. Here, a facile adsorption and subsequent heat-treatment method is developed to obtain uniform Cu@Ag core-shell nanowires. Ag-ammonia complex (Ag[(NH2R)2]+) as silver source adsorbs on the surface of CuNWs to form Cu@Ag-ammonia core-shell precursors and then decomposes to pure Ag shell through a simple thermal annealing process under air. The thickness of Ag shell can easily be controlled by adjusting the concentration of Ag-ammonia. The Ag shell perfectly prevents the oxidation of CuNWs, enabling the core-shell nanowires to maintain stability at high temperature (140 °C) and high humidity (85 °C, 85% RH) for at least 500 h. More importantly, transparent conductive films made from our Cu@Ag nanowires hold comparable optical and electrical properties to pure CuNWs. The large-scale and facile strategy demonstrated in this study offers huge potential to further explore the applications of CuNWs in flexible and stretchable electronic and optoelectronic devices.

Zhang, Bowen (ORCID:000000030432745X)↗
DOE OSTI2020

Confining Liquids inside Carbon Nanotubes: Accelerated Molecular Dynamics with Spliced, Soft-Core Potentials and Simulated Annealing

Understanding emergent phenomena of fluids under physical confinement requires the development of advanced tools for rapid and accurate simulation of their physiochemical properties. Simulating liquid molecules commensurate in size with the nanoscale enclosures that confine them is a key challenge. In this work, we demonstrate an accelerated molecular dynamics simulation technique that combines soft-core potentials (SCP) and simulated annealing (SA) to analyze confined liquids. This integrated SCP/SA method relies on a new spliced soft-core potential (SSCP), which enables tunable accuracy with respect to the target hard-core potential (HCP). SCP/SA enables the packing of enclosures with bulk material in a controlled, thermodynamically consistent manner. The enhanced SSCP accuracy is a critical feature of SCP/SA, enabling a smooth transition between the SCP and the HCP at a desired SCP hardness. We applied SCP/SA to the problem of filling a carbon nanotube (CNT) in periodic boundary conditions with a popular ionic liquid (IL), 1- butyl-3-methylimidazolium hexafluorophosphate $[\text{BMIM}^+][\text{PF}^–_6]$. We performed a series of triplicate simulations on systems with varying CNT diameter and charge to demonstrate SCP/SA’s versatility. Beyond this IL/CNT system, the SCP/SA simulation framework has a broad range of potential applications, not limited to nanoscale enclosures and interfaces, including both solid-state and biological systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Probing Sulfur Chemical and Electronic Structure with Experimental Observation and Quantitative Theoretical Prediction of Kα and Valence-to-Core Kβ X-ray Emission Spectroscopy

An extensive experimental and theoretical study of the Kα and Kβ high-resolution X-ray emission spectroscopy (XES) of sulfur-bearing systems is presented here. This study encompasses a wide range of organic and inorganic compounds, including numerous experimental spectra from both prior published work and new measurements. Employing a linear-response time-dependent density functional theory (LR-TDDFT) approach, strong quantitative agreement is found in the calculation of energy shifts of the core-to-core Kα as well as the full range of spectral features in the valence-to-core Kβ spectrum. The ability to accurately calculate the sulfur Kα energy shift supports the use of sulfur Kα XES as a bulk-sensitive tool for assessing sulfur speciation. The fine structure of the sulfur Kβ spectrum, in conjunction with the theoretical results, is shown to be sensitive to the local electronic structure including effects of symmetry, ligand type and number, and, in the case of organosulfur compounds, to the nature of the bonded organic moiety. This agreement between theory and experiment, augmented by the potential for high-access XES measurements with the latest generation of laboratory-based spectrometers, demonstrates the possibility of broad analytical use of XES for sulfur and nearby third-row elements. The effective solution of the forward problem, i.e., successful prediction of detailed spectra from known molecular structure, also suggests future use of supervised machine learning approaches to experimental inference, as has seen recent interest for interpretation of X-ray absorption near-edge structure (XANES).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Carbon Core Electron Spectra of Polycyclic Aromatic Hydrocarbons

Aromaticity profoundly affects molecular orbitals in polycyclic aromatic hydrocarbons. X-ray core electron spectroscopy has observed that carbon 1s–π* transitions can be broadened or even split in some polycyclic systems, although the origin of the effect has remained obscure. The π electrons in polycyclic systems are typically classified in the Clar model as belonging to either true aromatic sextets (similar to benzene) or isolated double bonds (similar to olefins). Here, bulk-sensitive carbon core excitation spectra are presented for a series of polycyclic systems and show that the magnitude of the 1s–π* splitting is determined primarily by the ratio of true aromatic sextets to isolated double bonds. The observed splitting can be rationalized in terms of ground state energetics as described by Hückel, driven by the π electron structure described by Clar. In conclusion, this simple model including only ground state energetics is shown to explain the basics physics behind the spectral evolution for a broad set of polycyclic aromatic hydrocarbons, although some residual deviations between this model and experiment can likely be improved by including a more detailed electronic structure and the core hole effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Core–Shell to Doped Quantum Dots: Evolution of the Local Environment Using XAFS

Internal structure study at an atomic level is a challenging task with far reaching consequences to its material properties, specifically in the field of transition metal doping in quantum dots. Diffusion of transition metal ions in and out of quantum dots forming magnetic clusters has been a major bottleneck in this class of materials. Diffusion of the magnetic ions from the core into the nonmagnetic shell in a core/shell heterostructure architecture to attain uniform doping has been recently introduced and yet to be understood. In this work, we have studied the local structure variation of Fe as a function of CdS matrix thickness and annealing time during the overcoating of Fe 3 O 4 core with CdS using X-ray absorption spectroscopy. The data reveals that Fe 3 O 4 core initially forms a core/shell structure with CdS followed by alloying at the interface eventually completely diffusing all the way through the CdS matrix to form homogeneously Fe-doped CdS QDs with excellent control over size and size distribution. Study of Fe K-edge shows a complete change of Fe local environment from Fe–O to FeS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis and Evaluation of Cu@ZnO Core@Shell Nanowires for Use in the Carbon Dioxide Thermal Reduction Reaction

Copper-based core@shell nanomaterials are of interest for the catalytic hydrogenation of carbon dioxide toward value-added products. In this context, we have developed a facile, microwave-based procedure for the reliable and reproducible synthesis of Cu@ZnO core@shell nanowires. A systematic assessment of the effect of rationally varying various reaction conditions on this protocol was completed in order to better evaluate the growth process of these core–shell motifs. We determined that among different reaction parameters, it was the critical role of reaction time which enabled the quantitatively reliable growth of external shells with tunable thicknesses of up to 20 nm. As a demonstration of the material’s practical viability, catalytic testing was subsequently performed for the reverse water–gas shift reaction (CO 2 + H 2 → CO + H 2 O), with the evolution of the process followed with in situ X-ray diffraction and X-ray absorption spectroscopy in order to probe structural changes and gauge stability. These tests found the catalysts to be effective at converting CO 2 to CO, with notable stability detected in the shell layer and no observed alloying between copper and zinc. Furthermore, our studies support the idea that the Cu–ZnO and CuO x –ZnO interfaces are essential for the effective activation of CO 2 and H 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2017

Tetragonal-Like Phase in Core–Shell Iron Iron-Oxide Nanoclusters

Two sizes of iron/iron-oxide (Fe/Fe-oxide) nanoclusters (NCs) of 10 and 35 nm diameters were prepared using a cluster deposition technique. Both these NCs displayed X-ray diffraction (XRD) peaks due to body-centered cubic (BCC) Fe 0 and magnetite-like phase. 57 Fe Mössbauer spectroscopy measurements confirmed (a) the core–shell nature of the NCs, (b) the Fe-oxide shell to be nanocrystalline and partially oxidized beyond magnetite, and (c) the Fe-oxide spins are significantly canted. In addition to the BCC Fe and magnetite-like phases, a phase similar to tetragonal σ-Fe-Cr (8% Cr) was clearly evident in the larger NC, based on XRD. The origin of the tetragonal-like phase in the larger NC could be due to significant distortion of the Fe 0 core lattice planes; subtle peaks due to this phase were also apparent in the smaller NC. Unambiguous evidence for the presence of such a phase was not clear from X-ray photoelectron spectroscopy, vibrating sample magnetometry, X-ray magnetic circular dichroism, or transmission electron microscopy. 57 Fe Mössbauer spectroscopy, however, provided support for a non-BCC Fe 0 phase in the strongest sixth and the first resonance lines of the Fe 0 sextet. So to our knowledge, this is the first report of a tetragonal-like phase in the Fe/Fe-oxide core–shell systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Tandem Core–Shell Si–Ta 3 N 5 Photoanodes for Photoelectrochemical Water Splitting

Here, nanostructured core–shell Si–Ta 3 N 5 photoanodes were designed and synthesized to overcome charge transport limitations of Ta 3 N 5 for photoelectrochemical water splitting. The core–shell devices were fabricated by atomic layer deposition of amorphous Ta 2 O 5 onto nanostructured Si and subsequent nitridation to crystalline Ta 3 N 5 . Nanostructuring with a thin shell of Ta 3 N 5 results in a 10-fold improvement in photocurrent compared to a planar device of the same thickness. In examining thickness dependence of the Ta 3 N 5 shell from 10 to 70 nm, superior photocurrent and absorbed-photon-to-current efficiencies are obtained from the thinner Ta 3 N 5 shells, indicating minority carrier diffusion lengths on the order of tens of nanometers. The fabrication of a heterostructure based on a semiconducting, n-type Si core produced a tandem photoanode with a photocurrent onset shifted to lower potentials by 200 mV. CoTiO x and NiO x water oxidation cocatalysts were deposited onto the Si–Ta 3 N 5 to yield active photoanodes that with NiO x retained 50–60% of their maximum photocurrent after 24 h chronoamperometry experiments and are thus among the most stable Ta 3 N 5 photoanodes reported to date.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Energetics at the Surface: Direct Optical Mapping of Core and Surface Electronic Structure in CdSe Quantum Dots Using Broadband Electronic Sum Frequency Generation Microspectroscopy

Understanding and controlling the electronic structure of nanomaterials is the key to tailoring their use in a wide range of practical applications. Despite this need, many important electronic states are invisible to conventional optical measurements and are typically identified indirectly based on their inferred impact on luminescence properties. This is especially common and important in the study of nanomaterial surfaces and their associated defects. Surface trap states play a crucial role in photophysical processes yet remain remarkably poorly understood. In this work we demonstrate for the first time that broadband electronic sum frequency generation (eSFG) microspectroscopy can directly map the optically bright and dark states of nanoparticles, including the elusive below gap states. This new approach is applied to model cadmium selenide (CdSe) quantum dots (QDs), where the energies of surface trap states have eluded direct optical characterization for decades. Our eSFG measurements show clear signatures of electronic transitions both above the band gap, which we assign to previously reported one- and two-photon transitions associated with the CdSe core, as well as broad spectral signatures below the band gap that are attributed to surface states. In addition to the core states, this analysis reveals two distinct distributions of below gap states, providing the first direct optical measurement of both shallow and deep surface states on this system. Lastly, chemical modification of the surfaces via oxidation results in the relative increase in the signals originating from the surface states. Overall, our eSFG experiments provide an avenue to directly map the entirety of the QD core and surface electronic structure, which is expected to open up opportunities to study how these materials are grown in situ and how surface states can be controlled to tune functionality.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Evidence for an Electronic State at the Interface between the SnO 2 Core and the TiO 2 Shell in Mesoporous SnO 2 /TiO 2 Thin Films

A comparative spectroelectrochemical study of micron thick mesoporous thin films composed of TiO 2 and SnO 2 nanocrystallites was undertaken to identify the location and identity of electronic state(s) in core/shell SnO 2 /TiO 2 films that have emerging applications in energy science. The mesoporous TiO 2 and SnO 2 films were synthesized by sol–gel techniques, and the core/shell material was created by atomic layer deposition of a TiO 2 shell on a SnO 2 core. Electrochemical reduction of these materials in aqueous electrolytes resulted in a blue shift of the fundamental VB → CB absorbance as well as a broad absorbance across the visible region. For SnO 2 , three unique spectra were required to model the potential dependent data while only one unique spectrum was needed to model the corresponding data for SnO 2 /TiO 2 and TiO 2 . Significantly, standard addition of the spectra measured for SnO 2 and TiO 2 did not model that for SnO 2 /TiO 2 . In other words, upon reduction of SnO 2 /TiO 2 there was no spectroscopic evidence for electrons residing in the SnO 2 core or in the TiO 2 shell. Instead, the appearance of a single potential-independent absorption spectrum was observed and attributed to electrons present within an interfacial region between the core and the shell. The charge extraction technique was used to determine that the density of SnO 2 /TiO 2 states was more similar to that of TiO 2 than SnO 2 . The potential onset followed the trend SnO 2 /TiO 2 > SnO 2 > TiO 2 , with TiO 2 closest to the vacuum level and SnO 2 /TiO 2 the furthest away. The implications of these results for solar energy conversion are discussed.

14 SOLAR ENERGY↗
DOE OSTI2019

Promoting Noncovalent Intermolecular Interactions Using a C 60 Core Particle in Aqueous PC60s-Covered Colloids for Ultraefficient Photoinduced Particle Activity

We report that noncovalent intermolecular interactions in nanomaterials, such as van der Waals effects, allow adjustment of the nanoscopic size of compounds and their conformation in molecular crystal regimes. These strong interactions permit small particle sizes to be maintained as the crystals grow. In particular, these effects can be leveraged in the confined/reinforcing phase of molecules. With this in mind, we used C 60 molecules as a core particle in single-PC60 surfactant-covered colloid in a water-processable system. Compared with our previous results based on a PC 61 BM core-PC60 shell particle, the PC60-C 60 colloid had a considerably smaller spherical structure due to the increased intermolecular interactions between C 60 (fullerene) molecules. Interestingly, the conformation of C 60 aggregates was altered depending on the mixed solvents and their volume fraction in the organic phase, which strongly affected the structural properties of the PC60-C 60 colloids. The particle facilitated strong interactions with a p-type core sphere when it was introduced as the shell part of a p-n heterojunction particle. This direct interaction provided effective electronic communication between p- and n-type particles, resulting in ultraefficient photonic properties, particularly in charge separation in aqueous heterostructured colloids. Lastly, this enabled the development of an extremely efficient photovoltaic device with a 6.74% efficiency, which could provide the basis for creating high-performance water-processable solar cells based on p-n heterostructured NPs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlling Pt Crystal Defects on the Surface of Ni–Pt Core–Shell Nanoparticles for Active and Stable Electrocatalysts for Oxygen Reduction

A strategy of direct growth of Pt on Ni was used to create and control Pt crystal defects on the surface of Ni–Pt core–shell nanoparticles. The control over the types of defects was easily achieved by changing the surfactant system. Here, in this work, two types of crystal defects have been introduced into Ni–Pt core–shell nanoparticles: polycrystalline shells with multiple grain boundaries and step-edge shells with undercoordinated atoms at corners and steps. We show that the step-edge shell has a higher specific activity for the oxygen reduction reaction (ORR), while the thinner polycrystalline shell results in a higher activity per mass and stability. Our results suggest that Ni–Pt core–shell nanoparticles with a thin Pt shell that have high density of crystal defect should be targeted for high performance ORR catalysts.

36 MATERIALS SCIENCE↗