Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cleaned”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Excerpt from Oxygen Monitor Clean Testing Report Performed in 2010

The Rosemount X-STREAM Series X2GP is a paramagnetic oxygen analyzer with a 0-25% oxygen measurement range. It claims a drift less than 2% of span (0.10% volume oxygen) per week, and a response time of less than 5 seconds (for the analyzer to report 90% of a step change). Our test equipment was set-up such that the same gas was running through each oxygen analyzer at the same time. This allowed Calibration Error, Calibration Drift, and Loss of Power Testing to be run on all monitors at the same time, eliminating any variability between the analyzers from tolerances in the gas cylinder, ambient temperature, ambient pressure, test duration, etc. An APTech pressure regulator was placed on the gas cylinder manifold and a 23 psia Paroscientific pressure transducer measured the regulator’s outlet pressure. This did not give the inlet pressure on any one analyzer but outlet pressure from the manifold before the stream was split. The APTech pressure regulator was used to keep operating conditions consistent. A DWYER rotameter was installed on each oxygen monitor’s outlet piping. With the exception of Variation of Flow Rate Testing, the rotameter was left fully open for all testing. The flow rate through each oxygen monitor was controlled by a Swagelok needle valve that was installed on each analyzer’s inlet piping. Additionally, a filter was installed in the each monitor’s inlet piping to keep particles from the measurement cells and a Swagelok ball valve was installed on each monitor’s outlet piping to isolate each monitor between tests. No pumps were installed. Each of the cylinders used was at a pressure greater than ambient room barometric pressure. This pressure differential was used to move gas through the testing equipment. The flow rate through each analyzer was controlled by the Swagelok needle valve installed on each analyzer’s inlet piping. Finally, for all tests, a Paroscientific Digiquartz Barometer was used to measure ambient room barometric pressure and a Fluke Thermo-hygrometer was used to measure ambient room temperature.

47 OTHER INSTRUMENTATION↗

Charting a Path for Reliable, Resilient and Affordable Clean Energy: A Roadmap for Three Communities in Utah

The roadmap identifies strategies to align deployment of distributed energy resources with the continued growth of utility-scale solar. The strategies outlined in the roadmap have been developed through collaborative discussions with project partners, but may not represent the opinions of, or positions of, all partner organizations and parties involved in the "Renewable Energy Impacts and Solutions in Utah" project. Rather, the strategies outlined in this Roadmap represent a suite of tools and actions that Salt Lake City, Park City, and the City of Moab can consider as each city works towards their community renewable electricity goals. While this Roadmap was developed to inform three communities as they progress towards their specific community energy goals, much of the analysis presented in the roadmap was conducted for Utah as a whole. Other communities in Utah can use the scenarios and strategies outlined in the roadmap to leverage the full potential of distributed energy resources to provide benefits to the community.

100% renewable↗

From Waste to Clean Fuel: Using Microwave Chemistry to Achieve Process Decarbonization

Microwave co-gasification of plastics and biomass has several advantages over conventional gasification, including enhanced hydrogen production and greater solid-to-gas conversion, as opposed to undesirable char and tar -- via process electrification route. A previous study at NETL has revealed the efficient role of microwave heating, which can liberate the oxygenated free radicals and encourage bond cleavage in non-microwave active plastics, if combined with microwave-active corn stover. However, further reduction of the unwanted tar must be achieved for future process scale-up and higher energy efficiency, which can be realized via a microwave-assisted catalytic approach. This continuous study investigates a series of microwave-active Fe catalysts that can efficiently enhance H2 production and reduce tar for plastic-corn stover co-gasification. The results suggest that in presence of magnetite, hydrogen yield increase 100% as compared to non-catalytic system at similar reaction conditions.

Abedin, Ashraf↗

Market Structure Evaluation to Support the Clean Energy Transition

One can argue that wholesale electricity markets in the United States are a grand experiment with scarcely two decades of operational experience in their current form. A wide body of literature points out short comings of these markets function today, ranging from problems of missing money to negative prices for real-time electricity prices. The purpose of this report is to outline a framework by which energy policies and market structures can be evaluated to ascertain the impact these institutions have on electricity generators. The report describes an evaluated framework to compare energy policy then it discusses fundamental differences in regulated versus deregulated electricity markets. Then the report leverages these sections to describe assessment needs for quantifying aggregate impacts to generators.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Iowa Tribe of Kansas and Nebraska: Advancing Clean, Resilient, and Sovereign Energy (Summary Report of Communities LEAP Activities)

The Iowa Tribe of Kansas and Nebraska (ITKN) is a federally recognized Native American Tribe located along the Missouri River on the border of northeast Kansas and southeastern Nebraska. There are over 800 residents (Tribal citizens and non-Tribal) who live on the reservation, as well as more than 500 people who visit or work on the reservation on a daily basis. The ITKN faces many energy challenges, including rising service costs and dozens of power outages annually that impact resident well-being and business activities on Tribal lands. Power service issues are made more challenging by the remoteness of the reservation, which is 20 miles from the nearest town. Despite this, the ITKN has a long history of cultural and economic resilience: Local self-reliance, environmental stewardship, respecting the carrying capacity of the land, and strengthening the community are Tribal communities' traditional strengths. Long-term energy goals for the ITKN are centered around achieving energy sovereignty. Priority actions include: (1) Establishing a Tribal Utility Authority (TUA) to promote social welfare and community development.; (2) Deploying renewable community microgrids with ground-mount solar arrays and sustainable energy storage systems to advance energy sovereignty, resilience, and reliability. To advance these goals, the ITKN partnered with the U.S. Department of Energy's (DOE's) Communities LEAP (Local Energy Action Program) pilot. From August 2022 to March 2024, the ITKN community coalition collaborated with technical assistance providers at DOE's National Renewable Energy Laboratory (NREL) and Sandia National Laboratories to evaluate TUA planning needs and microgrid deployment scenarios. This final report details the Communities LEAP technical assistance process, models and analysis performed, and results.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The 8RH 2 Process for Producing Clean Hydrogen with Autothermal Reforming and Carbon Capture

The primary objective of this project is to demonstrate the commercial viability and environmental benefits of an 8 Rivers Hydrogen (8RH 2 ) process, a proprietary technology developed to optimally produce high-purity blue H 2 with up to 99% carbon capture. This 8RH 2 process is particularly notable for its integration of a low-energy cryogenic CO 2 separation system that not only maximizes hydrogen recovery but also minimizes the carbon footprint of the operation. This aligns with global environmental goals and supports the United States' push toward energy sustainability and independence.

03 NATURAL GAS↗

LNPK 156 Geothermal Coalition: Designing and Deploying Clean Energy in a Justice40 Cold Climate Community

The LNPK 156 Geothermal Coalition formed around the idea of building a new geothermal heating and cooling system in Duluth, MN for the Lincoln Park Justice40 neighborhood. The Coalition has been spearheaded by the City of Duluth and the local non-profit Ecolibrium3, and is named after the census tract of the neighborhood containing large portions of Lincoln Park, as well as a wastewater treatment plant, managed by the Western Lake Superior Sanitary District (WLSSD). The idea of building a geothermal system came to fruition over the period of about a decade, with repeated observations that the warm water discharged from the wastewater treatment plant was an energy-rich resource that has currently been untapped and released into the St. Louis River. The objective of this project was to build a geothermal system that harnesses wastewater heat recovery methods and satisfies the demand in a portion of Lincoln Park – a neighborhood experiencing high energy burdens, low life-expectancy, and where the natural gas and fuel oil used to heat homes and businesses results in decreased air quality and increased carbon emissions. The goal was to utilize this wastewater heat recovery method to benefit the neighborhood hosting the wastewater plant itself.

15 GEOTHERMAL ENERGY↗

Expansion of Carbon Calculator for Land Use and Land Management Change from Biofuels Production (CCLUB) to Address Induced Land Use Changes and Other Indirect Effects of Clean Fuel Production for R&D GREET ® 2024

Since the late 2000s, biofuel life-cycle analysis (LCA) has included induced land use change (ILUC) and other indirect effects (I-effects) of large-scale feedstock production for biofuels. In ILUC and I-effect emissions modeling, economic models are used to simulate the area of land conversion among different land types and other I-effects such as non-feedstock crop production and livestock production that are driven by the scenarios of biofuel production volume shocks. On the other hand, emission factors (EF) models estimate carbon stock changes and GHG emissions associated with these changes. Finally, the area and type of ILUC and I-effects are combined with the EFs to estimate the biofuel ILUC/I-effect GHG emissions in the unit of grams of CO 2 equivalent per MJ biofuel produced (g CO 2 e/MJ).

09 BIOMASS FUELS↗

Modeling and Analysis of Clean Energy and Storage Technologies (CRADA Final Report, Project 1)

The goal of this project is to provide Southern Company Services, Inc. ("Participant") with custom scripts that can be used to create an average PV energy production profile, calculate lifetime energy value, calculate capacity value, and calculate the resultant financial metrics considering those value streams. Secondly, a fuel-cell model will be added to the public version of System Advisor Model (SAM). This standalone technology will incorporate PV and battery storage, allowing the participant to model the interaction of these three technologies. By adding this capability to a public version of SAM, a broad audience will be able to consider the system performance and financial benefits of installing a fuel cell as a baseline generator with PV. Thirdly, automated dispatch algorithms will be developed and added to SAM. These algorithms will enable Southern Company to dispatch a DC-connected front-of-the-meter battery system while considering price signals and PV clipping behavior. By adding these capabilities to a public version of SAM, users will be able to consider more complex and realistic ways of dispatching a battery system.

14 SOLAR ENERGY↗

Economic Extraction and Recovery of REEs and Production of Clean Value-Added Products from Low-Rank Coal Fly Ash

TechConnect World Innovation Conference & Expo, Washington, DC, June 13–15, 2022. The University of North Dakota (UND) Energy & Environmental Research Center (EERC) teamed with Pacific Northwest National Laboratory; the North Dakota Industrial Commission Lignite Research Program; and commercial partners Basin Electric Power Cooperative, Great River Energy, and Southern Company to execute a Cooperative Agreement funded by the U.S. Department of Energy’s National Energy Technology Laboratory (NETL) focused on identifying unique pathways and pretreatments to extract rare-earth elements (REEs) from low-rank coal (LRC) ash in a more economical and environmentally benign manner than current methods. By focusing on minimizing process steps and consumptive use of extraction solutions, a tunable, economically viable process for REE extraction from LRC ash was developed.

01 COAL, LIGNITE, AND PEAT↗

Carbon Ore-Derived Critical Materials for Clean Energy Technologies

Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, San Diego, California, October 27–31, 2024. Trends in the manufacture of electric vehicles that use graphite-based LIBs are rising steeply in the United States and globally, but the U.S. domestic supply chains for graphite, the largest component in an LIB by mass, is severely limited and faces complicated geopolitical dynamics with foreign sources. Consequently, the United States has designated graphite as a critical mineral to focus attention and resources to develop technologies to meet the challenge of limited domestic graphite supply chains. Results obtained so far based on the UCOP process have successfully validated the technology at the laboratory scale, with the produced graphite material showing up to 95% degree of graphitization, high carbon purity of ~99.98%, residual ash content of ≤0.02%, negligible moisture, low trace elements, and high electrochemical stability. These results suggest that the emerging UCOP technology is a promising approach to effectively synthesize high-quality graphite from abundant coal and coal waste resources in the United States to create a sustainable domestic critical graphite supply chain. A brief description of the status of UCOP process development and representative results will be presented.

01 COAL, LIGNITE, AND PEAT↗

TEAMER – Harvesting Subsea Water Motion to Provide Clean Electrical Power (Abstract)

Power generation from vortex induced vibration (VIV) is an emerging field with new technologies that are just beginning to be field tested. In this TEAMER project, WITT Energy will be field testing the power production of its pendulum system in two different configurations to evaluate its performance. The amount of power produced by a VIV instrument depend on the frequency at which it vibrates. The vibrational frequency is controlled by the device shape and its interaction with the flow velocity. Computer models are used to predict vibration frequencies as a function of flow velocity but they may be inaccurate due to complicated bathymetry and bottom roughness that is not captures by the models. This project will test the WITT VIV device in the Sequim Bay channel over a range of tidal velocities. Two tests will be completed with different pipe lengths that are expected to vary the vibrational frequency and therefore the power produced. PNNL will use an acoustic doppler current profiler (ADCP) to monitor the flow conditions during the tests. These tests will help WITT Energy evaluate how closely field operations follow computer model predictions and how best to configure their device for electricity production.

16 TIDAL AND WAVE POWER↗

Clean Energy to Communities: Technical Assistance for Region Five, MN

The Region Five Development Commission (“R5DC”) serves five counties in Minnesota, USA and received an Energizing Rural Communities Prize through the U.S. Department of Energy. Currently, R5DC is piloting projects in the City of Motley, for which two energy audits have been conducted. R5DC is seeking input regarding which options to pursue based on these two audits, as well a framework for future audits to be as effective and helpful as possible. This report defines a framework for future audits for R5DC, by providing an overview of the requirements for different levels of audits and identifying available resources for conducting energy audits.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Procurement Analysis Tool (PAT) Informational Webinar for Clean Energy States Alliance

This is a slide deck for the Procurement Analysis Tool and the deck published in August 2025. This webinar is a part of the PAT roadshow and we are presenting it in different forums and to different audience. https://research-hub.nrel.gov/en/publications/procurement-analysis-tool-pat-informational-webinar

29 ENERGY PLANNING, POLICY, AND ECONOMY↗