Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Study of ${B}_c^{+}$ meson decays to charmonia plus multihadron final states

Four decay modes of the ${B}_c^{+}$ meson into a J/ψ meson and multiple charged kaons or pions are studied using proton-proton collision data, collected with the LHCb detector at centre-of-mass energies of 7, 8, and 13 TeV and corresponding to an integrated luminosity of 9 fb -1 . The decay ${B}_c^{+}$ → J/ψK + K - π + π + π - is observed for the first time, and evidence for the ${B}_c^{+}$ → J/ψ4π + 3π - decay is found. The decay ${B}_c^{+}$ → J/ψ3π + 2π - is observed and the previous observation of the ${B}_c^{+}$ → ψ(2S)π + π + π - decay is confirmed using the ψ(2S) → J/ψπ + π - decay mode. Ratios of the branching fractions of these four ${B}_c^{+}$ decay channels are measured.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Dual-season thermal energy storage-integrated heat pump system for load shifting: experiments, modeling and nationwide analysis

Here, this paper proposes and validates a dual-season thermal energy storage-integrated heat pump (TES-HP) system that shifts building electric load in both cooling and heating modes using a single phase-change TES. The design uses the TES as a heat sink for the condenser in summer and a heat source for the evaporator in winter, thereby reducing on-peak electric demand while ensuring compatible with existing air-distribution systems. A 14-kW TES-HP prototype with six operating modes and novel refrigerant charge management strategies was experimentally tested under varied conditions. Subsequently, data-driven polynomial performance curves were developed and validated against experiments, then coupled with a phase change material (PCM) model and a calibrated building model within a rule-based controller. Single-day case studies demonstrated effective on-peak demand reduction while maintaining thermal comfort. During cooling, hourly power was lowered by up to 1.5 kW; in heating, average hourly power decreased from over 3.5 kW to 1.8 kW, compared to an HP-only system, achieving 64.5 % load shifting, and the need for resistance heating was eliminated. Seasonal simulations showed typical on-peak electricity savings of 25–35 % in cooling and 40–65 % in heating, with the largest benefits on the hottest and coldest days. Extended response-surface analysis and nationwide mapping quantified load shifting as functions of ambient and TES temperatures, revealing a seasonal trade-off in TES phase-change temperature. These results demonstrate the TES-HP system as a practical and scalable solution for grid-interactive buildings that reduces on-peak demand and electricity use while maintaining thermal comfort and enhancing grid flexibility and reliability.

Grid-interactive buildings↗
DOE OSTI2022

Simultaneous neutron and X-ray tomography for visualization of graphite electrode degradation in fast-charged lithium-ion batteries

Advanced battery characterization using neutron and X-ray-based imaging modalities is crucial to reveal fundamental degradation modes of lithium-ion batteries (LIBs). Taking advantage of the sensitivity of neutrons to some low-Z (Li) and X-rays to high-Z materials (Cu), here we demonstrate the viability of simultaneous neutron and X-ray tomography (NeXT) as a non-destructive imaging platform for ex-situ 3D visualization of graphite electrode degradation following extreme fast charging (XFC). In addition, we underscore the benefits of the simultaneous of NeXT by combining the neutron and X-ray tomography data from the same sample location for material identification and segmentation of one pristine and two XFC-cycled graphite electrodes (9C charge for 450 cycles). Our ex-situ results and methodology development pave the way for the design of NeXT-friendly LIB geometries that will allow operando and/or in-situ 3D visualization of electrode degradation during XFC.

25 ENERGY STORAGE↗
DOE OSTI2024

Physics-constrained machine learning for electrodynamics without gauge ambiguity based on Fourier transformed Maxwell’s equations

We utilize a Fourier transformation-based representation of Maxwell’s equations to develop physics-constrained neural networks for electrodynamics without gauge ambiguity, which we label the Fourier–Helmholtz–Maxwell neural operator method. In this approach, both of Gauss’s laws and Faraday’s law are built in as hard constraints, as well as the longitudinal component of Ampère–Maxwell in Fourier space, assuming the continuity equation. An encoder–decoder network acts as a solution operator for the transverse components of the Fourier transformed vector potential, $\hat{A}_⟂(k,t)$, whose two degrees of freedom are used to predict the electromagnetic fields. This method was tested on two electron beam simulations. Among the models investigated, it was found that a U-Net architecture exhibited the best performance as it trained quicker, was more accurate and generalized better than the other architectures examined. We demonstrate that our approach is useful for solving Maxwell’s equations for the electromagnetic fields generated by intense relativistic charged particle beams and that it generalizes well to unseen test data, while being orders of magnitude quicker than conventional simulations. We show that the model can be re-trained to make highly accurate predictions in as few as 20 epochs on a previously unseen data set.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Autonomous Tuning and Charge-State Detection of Gate-Defined Quantum Dots

Defining quantum dots in semiconductor-based heterostructures is an essential step in initializing solid-state qubits. With growing device complexity and increasing number of functional devices required for measurements, a manual approach to finding suitable gate voltages to confine electrons electrostatically is impractical. Here, we implement a two-stage device characterization and dot-tuning process, which first determines whether devices are functional and then attempts to tune the functional devices to the single or double quantum-dot regime. We show that automating well-established manual-tuning procedures and replacing the experimenter’s decisions by supervised machine learning is sufficient to tune double quantum dots in multiple devices without premeasured input or manual intervention. The quality of measurement results and charge states are assessed by four binary classifiers trained with experimental data, reflecting real device behavior. We compare and optimize eight models and different data preprocessing techniques for each of the classifiers to achieve reliable autonomous tuning, an essential step towards scalable quantum systems in quantum-dot-based qubit architectures.

Darulova, J↗
DOE OSTI2021

Shell model analysis of the B ( E 2,2 + → 0 + ) values in the A = 70, T = 1 triplet 70 Kr, 70 Br, and 70 Se

The B(E2, 2 + → 0 + ) transition strengths of the T=1 isobaric triplet 70 Kr, 70 Br, 70 Se, recently measured at the RIKEN Radioactive Isotope Beam Factory (RIBF), are discussed in terms of state-of-the-art large scale shell model calculations using the JUN45 and JUN45 + LNPS plus Coulomb interactions. In this Letter we argue that, depending on the effective charges used, the calculations are either in line with the experimental data within statistical uncertainties, or the anomaly happens in 70 Br, rather than 70 Kr. In the latter case, we suggest that it can be due to the presence of a hitherto undetected 1 + T = 0 state below the yrast 2 + T = 1 state. Furthermore, our results do not support a shape change of 70 Kr with respect to the other members of the isobaric multiplet.

59 ≤ A ≤ 89↗
DOE OSTI2024

Definition of fragmentation functions and the violation of sum rules

We point out a problem with the formulation and derivations of sum rules for quark fragmentation functions that impacts their validity in QCD, but which potentially points toward an improved understanding of final states in inclusive hard processes. Fragmentation functions give the distribution of final-state hadrons arising from a parton exiting a hard scattering, and the sum rules for momentum, electric charge, etc. express conservation of these quantities. The problem arises from a mismatch between the quark quantum numbers of the initial quark and the fact that all observed final-state hadrons are confined bound states with color zero. We point that, in a confining theory like QCD, the Wilson line in the operator definition of a fragmentation function entails that the final state in a fragmentation function includes a bound state in the external field generated by the Wilson line. We justify this with the aid of general features of string hadronization. The anomalous bound states are restricted to fractional momentum z = 0 . They tend to invalidate sum rules like the one for charge conservation when applied to the fragmentation functions inferred from experimental data but not the momentum sum rule. We propose to exploit our ideas in future studies as a way to relate the fragmentation functions extracted from inclusive cross sections to more detailed nonperturbative descriptions of final state hadronization. We also describe scenarios wherein the traditional sum rules might remain approximately valid with a reasonably high degree of accuracy. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Combined search for electroweak production of winos, binos, higgsinos, and sleptons in proton-proton collisions at s = 13 TeV

A combination of the results of several searches for the electroweak production of the supersymmetric partners of standard model bosons, and of charged leptons, is presented. All searches use proton-proton collision data at s = 13 TeV recorded with the CMS detector at the LHC in 2016–2018. The analyzed data correspond to an integrated luminosity of up to 137 fb − 1 . The results are interpreted in terms of simplified models of supersymmetry. Two new interpretations are added with this combination: a model spectrum with the bino as the lightest supersymmetric particle together with mass-degenerate Higgsinos decaying to the bino and a standard model boson, and the compressed-spectrum region of a previously studied model of slepton pair production. Improved analysis techniques are employed to optimize sensitivity for the compressed spectra in the wino and slepton pair production models. The results are consistent with expectations from the standard model. The combination provides a more comprehensive coverage of the model parameter space than the individual searches, extending the exclusion by up to 125 GeV, and also targets some of the intermediate gaps in the mass coverage. © 2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Exploring the QCD phase diagram through correlations and fluctuations

The exploration of the Quantum Chromodynamics (QCD) phase diagram is a central goal of relativistic heavy-ion collision experiments. This review focuses on the role of fluctuations and correlations as sensitive probes of the phase structure. We discuss theoretical advancements and experimental methodologies employed to map the QCD phase diagram, highlighting constraints derived from both lattice QCD calculations and existing experimental data. Key observables such as cumulants and factorial cumulants of conserved charges (e.g., net-proton, net-charge) are explored as promising signatures of phase transitions and the QCD critical point. We discuss how these quantities are measured experimentally and compared with theoretical predictions, addressing challenges and best practices for meaningful comparisons. Special attention is given to predictions and current experimental results at high baryon density, including recent findings from the STAR collaboration at RHIC. Finally, we identify open issues and future directions for fluctuation and correlation studies at lower collision energies, relevant for future measurements, for example by the CBM experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fission-product decay studies with the FRIB Decay Station

The Facility for Rare Isotopes Beams (FRIB) will be the flagship facility in low-energy nuclear physics when it comes online in 2022. This U.S. Department of Energy Office of Science user facility will open up a multitude of new opportunities to study exotic nuclei and will lead to new discoveries in nuclear structure, nuclear astrophysics, fundamental symmetries, and isotopes of importance to nuclear applications. The b-decay properties of neutron-rich isotopes will be measured with the FRIB Decay Station, a sophisticated state-of-the-art modular multi-detector system envisioned to perform b, g, n, and charged-particle spectroscopy. In this feasibility study, we use nuclear decay data collected with the FRIB Decay Station precursor, the Beta-Counting Station, currently used at Michigan State University with a radioactive beam produced at the National Superconducting Cyclotron Laboratory to identify the FRIB Decay Station capabilities for future measurements of neutron-rich exotic nuclei at FRIB to help provide a path forward for future measurements of interest to the lab’s mission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Exploring Si Heterojunction Solar Cell Degradation: Bulk and Interface Processes Analyzed by Simulations and Experiments in Order to Develop Mitigation Strategies

The Si technology with the highest conversion efficiency is a-Si/c-Si heterojunction (HJ) PV. Its market penetration, however, is slowed by reports that fielded HJ modules degraded at twice the rate of regular c-Si modules. Our very recent work confirmed this degradation and attributed it to enhanced recombination at the a-Si/c-Si interface, caused by the slow, order-of-magnitude increase of the defect density. We propose to comprehensively explore degradation mechanisms in Si HJ cells by combining simulations and experiments. Theoretically, we will: (1) simulate structure of a-Si and a-Si/c-Si interfaces, identify defects; (2) determine statistics of energy barriers that control defect formation; (3) compute growth of defect density from the barrier distribution, and the resulting degradation of Voc. Experimentally, we will: (1) create a series of HJ-cell-representative stacks with varying layer thicknesses and deposition conditions by using PECVD tools; (2) use temperature and injection-dependent lifetime spectroscopy to determine effective lifetimes; (3) deconvolve the data to separate bulk and interface effects, and the effects of charge density and interface defects to analyze long time degradation. The goal is to identify material and device degradation mechanisms, to develop mitigation strategies for improved stability, such as the introduction of capping layers and hydrogen diffusion control.

14 SOLAR ENERGY↗
DOE OSTI2023

Thermopile Energy Harvesting for Subsurface Wellbore Sensors (Final Report)

Robust in situ power harvesting underlies all efforts to enable downhole autonomous sensors for real-time and long-term monitoring of CO 2 plume movement and permeance, wellbore health, and induced seismicity. This project evaluated the potential use of downhole thermopile arrays, known as thermoelectric generators (TEGs), as power sources to charge sensors for in situ real-time, long-term data capture and transmission. Real-time downhole monitoring will enable “Big Data” techniques and machine learning, using massive amounts of continuous data from embedded sensors, to quantify short- and long-term stability and safety of enhanced oil recovery and/or commercial-scale geologic CO 2 storage. This project evaluated possible placement of the TEGs at two different wellbore locations: on the outside of the casing; or on the production tubing. TEGs convert heat flux to electrical power, and in the borehole environment, would convert heat flux into or out of the borehole into power for downhole sensors. Such heat flux would be driven by pumping of cold or hot fluids into the borehole—for instance, injecting supercritical CO 2 —creating a thermal pulse that could power the downhole sensors. Hence, wireless power generation could be accomplished with in situ TEG energy harvesting. This final report summarizes the project’s efforts that accomplished the creation of a fully operational thermopile field unit, including selection of materials, laboratory benchtop experiments and thermal-hydrologic modeling for design and optimization of the field-scale power generation test unit. Finally, the report describes the field unit that has been built and presents results of performance and survivability testing. The performance and survivability testing evaluated the following: 1) downhole power generation in response to a thermal gradient produced by pumping a heated fluid down a borehole and through the field unit; and 2) component survivability and operation at elevated temperature and pressure conditions representative of field conditions. The performance and survivability testing show that TEG arrays are viable for generating ample energy to power downhole sensors, although it is important to note that developing or connecting to sensors was beyond the scope of this project. This project’s accomplishments thus traversed from a low Technical Readiness Level (TRL) on fundamental concepts of the application and modeling to TRL-5 via testing of the fully integrated field unit for power generation in relevant environments. A fully issued United States Patent covers the wellbore power harvesting technology and applications developed by this project.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Standardized Protocol for Real-Time APIs as Required by Title 23 CFR 680.116(c)

Improving the ability of drivers to easily locate working and available chargers is key to improving the public charging experience. Electric vehicle charging providers who are recipients of federal funds through the National Electric Vehicle Infrastructure (NEVI) Formula Program, Charging and Fueling Infrastructure (CFI) Discretionary Grant Program, and other funding programs as identified under Title 23 of the U.S. Code must deploy and maintain an application programming interface (API) to access information about charging stations they operate.1 This includes information about individual charging ports, pricing, and availability in accordance with the Federal Highway Administration’s National Electric Vehicle Infrastructure Standards and Requirements, 23 CFR 680.116(c), herein referred to as the minimum standards (Federal Highway Administration 2023). Specifically outlined in the minimum standards, states and other designated recipients are required to ensure that charging station information including location, connector type, power level, real-time status, and real-time price to charge are available free of charge to third-party software developers through an API. These requirements are intended to enable effective communication with consumers about available charging stations and help consumers make informed decisions about trip planning, including when and where to charge. This document provides a standardized protocol for how to structure data, data update frequency, and practices for making the data required to be shared via API usable for improving public transparency and the customer experience. These are recommendations only and do not modify the Federal Highway Administration’s minimum standards in any way.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Bi-Kappa Proton Mirror and Cyclotron Instabilities in the Solar Wind

Abstract The charged particles in the solar wind are often observed to possess a nonthermal tail in the velocity distribution function, a feature that can be fitted with the Kappa model. The anisotropic, or bi-Kappa, model of protons, electrons, and other charged particles is thus adopted in the literature for interpreting the data as well as in the context of the analysis of wave–particle interactions. The present paper develops an approximate but efficient theory of the mirror and cyclotron instabilities excited by the bi-Kappa protons in the solar wind. A velocity moment-based quasi-linear theory of these instabilities is also formulated in order to investigate the saturation behavior. Applications of the formalism are made for instabilities close to the marginally unstable state, which is typical of the solar wind near 1 au.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

An example of anticorrelation of auroral particles and electric fields.

The question of whether correlation or anticorrelation should occur is complex and depends on many factors, e.g., the internal impedance of the source; the Pedersen conductivity, which in turn is dependent on the incident energy of the precipitated particles; whether space charge can build up; and the magnitude of the incoming flux. Data are presented from a case in which an anticorrelation between auroral particles and electric fields is especially striking. The data were obtained from a Nike Tomahawk launched from the Norwegian rocket range at Andoya. The experiments carried are described briefly. The data support the anticorrelation model as one mechanism that can affect the electric field strength in auroral regions.

Maynard, N. C.↗
NASA NTRS1974

International Cosmic Ray Conference, 13th, University of Denver, Denver, Colo., August 17-30, 1973, Proceedings. Volumes 3 & 4

Volumes 3 and 4 contain papers dealing with measurements of muons and neutrinos, ultrahigh-energy interactions, extensive air showers, and details of experimental techniques and instrumentation. Attention is given to the zenith angle and underground depth dependence of cosmic ray muons, muon charge ratios and energy spectra, extraterrestrial sources of neutrinos, strong interaction data from new accelerators, searches for quarks and other new particles, hadron fluxes and propagation in the atmosphere, high-energy gamma-ray measurements, and new models and theories for high-energy strong interactions. Extensive air showers are examined in papers dealing with associated Cerenkov light, radio emission, structure, the hadron content, and primaries. The design, operation, and performance of various detectors are explained. Individual items are announced in this issue.

Source record↗
NASA NTRS1975

Air pollution source identification

The techniques available for source identification are reviewed: remote sensing, injected tracers, and pollutants themselves as tracers. The use of the large number of trace elements in the ambient airborne particulate matter as a practical means of identifying sources is discussed. Trace constituents are determined by sensitive, inexpensive, nondestructive, multielement analytical methods such as instrumental neutron activation and charged particle X-ray fluorescence. The application to a large data set of pairwise correlation, the more advanced pattern recognition-cluster analysis approach with and without training sets, enrichment factors, and pollutant concentration rose displays for each element is described. It is shown that elemental constituents are related to specific source types: earth crustal, automotive, metallurgical, and more specific industries. A field-ready source identification system based on time and wind direction resolved sampling is described.

Fordyce, J. S.↗