Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPETENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Differences in Patient Characteristics and Midterm Outcome Between Asian and European Patients Treated with Radiofrequency Ablation for Hepatocellular Carcinoma

PurposeThe aim of this study was to compare patient characteristics and midterm outcomes after RFA for unresectable Hepatocellular carcinoma (HCC) in Asian and European cohorts.Materials and MethodsThe study was based on retrospective analysis of 279 patients (mean 64.8 ± 12.1 years; 208 males) treated with RFA for de novo HCC in tertiary referral centers in Singapore and the Netherlands, with median follow-up of 28.2 months (quartiles: 13.1–40.5 months). Cumulative incidence of recurrence and death were analyzed using a competing risk model.ResultsAge was higher in the Asian group: 66.5 versus 60.1 years (p < 0.0001). The most common etiology was hepatitis B in the Asian group (48.0 %) and alcohol-induced cirrhosis in Europeans (54.4 %); p < 0.001. Asian patients had less advanced disease: 35.5, 55.0, and 3.0 %, respectively, had BCLC 0, A, and B versus 21.5, 58.2, and 15.2 % in the European group (p = 0.01). The cumulative incidences of recurrence in the Asian group at 1, 2, 3, and 5 years were 37.0, 56.4, 62.3, and 67.7 %, respectively, compared to 32.6, 47.2, 49.7, and 53.4 % in the European group (p = 0.474). At 1, 2, 3, and 5 years, the cumulative incidence rates of death in the Asian group were 2.0, 3.9, 4.9, and 4.9 %, respectively, corresponding to 7.7, 9.2, 14.1, and 21.0 % in the European group (p = 0.155).ConclusionSimilar short-term treatment outcomes are achieved with RFA in HCC patients in the South-East Asian and Northern-European populations. Midterm recurrence and death rates differ between the groups as a result of differences in baseline patient characteristics and patient selection. Our study provides insight relevant to the design of future international studies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Post-procedural Care in Interventional Radiology: What Every Interventional Radiologist Should Know—Part I: Standard Post-procedural Instructions and Follow-Up Care

Interventional radiology (IR) has evolved into a full-fledged clinical specialty with attendant patient care responsibilities. Success in IR now requires development of a full clinical practice, including consultations, inpatient admitting privileges, and an outpatient clinic. In addition to technical excellence and innovation, maintaining a comprehensive practice is imperative for interventional radiologists to compete successfully for patients and referral bases. A structured approach to periprocedural care, including routine follow-up and early identification and management of complications, facilitates efficient and thorough management with an emphasis on quality and patient safety.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Simulation of Endovascular Aortic Repair Using 3D Printed Abdominal Aortic Aneurysm Model and Fluid Pump

Background: Abdominal aortic aneurysm (AAA) models can be manufactured with 3D printing technology. This study describes detailed methodology and validation of endovascular aortic repair (EVAR) simulation using 3D printed AAA model connected to hemodynamic pump. Method: The AAA model was printed with Objet500 Connex3 (Stratasys, Eden Prairie, MN) and connected to BDC PD-0500 fluid pump (BDC Laboratories, Wheat Ridge, CO). EVAR procedure metrics were benchmarked in two expert implanters and compared to 20 vascular surgical trainees with different levels of EVAR experience (< 20 or ≥ 20 cases). All simulations were performed using commercially available stent grafts, guidewires, catheters, fluoroscopic guidance and digital subtraction angiography. Studied outcomes included ability to complete the procedure independently, time to deploy aortic component, ability to cannulate contralateral gate and complete the repair, and total fluoroscopy and procedure times. Results: A total of 22 EVAR simulation procedures were performed with mean procedure time of 37 ± 12 min. Experienced trainees had significantly lower total procedural time (32 ± 9 vs. 44 ± 6 min, P = 0.003) and fluoroscopic time (13 ± 5 vs. 23 ± 8 min, P = 0.005). All experienced trainees completed the procedure independently in < 45 min, compared to six (46%) of those with less EVAR experience (P = 0.016). Among less experienced trainees, only two (15%) completed the entire procedure independently (P < 0.001). Benchmark implanters performed significantly better than both trainee groups in nearly all EVAR metrics. Conclusion: EVAR simulation was feasible and simulated all procedural steps with high fidelity. This model may be applicable for assessment of technical competencies and standard endovascular skill acquisition within vascular surgery training curricula.

3D PRINTING↗

Thermodynamic and dynamic contributions to future changes in summer precipitation over Northeast Asia and Korea: a multi-RCM study

This study examines future changes in precipitation over Northeast Asia and Korea using five regional climate model (RCM) simulations driven by single global climate model (GCM) under two representative concentration pathway (RCP) emission scenarios. Focusing on summer season (June–July–August) when heavy rains dominate in this region, future changes in precipitation and associated variables including temperature, moisture, and winds are analyzed by comparing future conditions (2071–2100) with a present climate (1981–2005). Here, physical mechanisms are examined by analyzing moisture flux convergence at 850 hPa level, which is found to have a close relationship to precipitation and by assessing contribution of thermodynamic effect (TH, moisture increase due to warming) and dynamic effect (DY, atmospheric circulation change) to changes in the moisture flux convergence. Overall background warming and moistening are projected over the Northeast Asia with a good inter-RCM agreement, indicating dominant influence of the driving GCM. Also, RCMs consistently project increases in the frequency of heavy rains and the intensification of extreme precipitation over South Korea. Analysis of moisture flux convergence reveals competing impacts between TH and DY. The TH effect contributes to the overall increases in mean precipitation over Northeast Asia and in extreme precipitation over South Korea, irrespective of models and scenarios. However, DY effect is found to induce local-scale precipitation decreases over the central part of the Korean Peninsula with large inter-RCM and inter-scenario differences. Composite analysis of daily anomaly synoptic patterns indicates that extreme precipitation events are mainly associated with the southwest to northeast evolution of large-scale low-pressure system in both present and future climates.

54 ENVIRONMENTAL SCIENCES↗

Peculiarities of Intracellular Signal Transduction in the Regulation of Functions of Mesenchymal, Neural, and Hematopoietic Progenitor Cells

The role of NF-κB, cAMP/PKA, JAKs/STAT3, ERK1/2, p38, JNK, and p53 signaling pathways in the realization of growth potential of mesenchymal, neural, erythroid, and granulomonocytic progenitor cells were examined in vitro. Using selective blockers of signaling molecules, we revealed some principal distinctions of their involvement in determination of proliferation-differentiation status of the progenitor cells of different functional classes. The most salient peculiarities were observed in the roles of cAMP/PKA, JNK, and JAKs/STAT3 signaling pathways in the control of functions of various types of the regeneration-competent elements. The specific features of intracellular signaling revealed in histogenetically and functionally different progenitor cells attest to visibility of differentiated pharmacological stimulation of regeneration in individual tissues and prospectiveness in the development of targeted remedies for regenerative medicine based on modifiers of activity of the intracellular signaling molecules.

60 APPLIED LIFE SCIENCES↗

Genetic changes that increase 5-hydroxymethyl furfural resistance in ethanol-producing Escherichia coli LY180

The ability of a biocatalyst to tolerate furan inhibitors present in hemicellulose hydrolysates is important for the production of renewable chemicals. This study shows EMFR9, a furfural-tolerant mutant of ethanologenic E. coli LY180, has also acquired tolerance to 5-hydroxymethyl furfural (5-HMF). The mechanism of action of 5-HMF and furfural appear similar. Furan tolerance results primarily from lower expression of yqhD and dkgA, two furan reductases with a low Km for NADPH. Furan tolerance was also increased by adding plasmids encoding a NADPH/ NADH transhydrogenase (pntAB). Together, these results support the hypothesis that the NADPH-dependent reduction of furans by YqhD and DkgA inhibits growth by competing with biosynthesis for this limiting cofactor.

5-Hydroxymethyl furfural↗

Bacterial Pu(V) reduction in the absence and presence of Fe(III)-NTA: modeling and experimental approach

Plutonium (Pu), a key contaminant at sites associated with the manufacture of nuclear weapons and with nuclear-energy wastes, can be precipitated to 'immobilized' plutonium phases in systems that promote bioreduction. Ferric iron (Fe 3+ ) is often present in contaminated sites, and its bioreduction to ferrous iron (Fe 2+ ) may be involved in the reduction of Pu to forms that precipitate. Alternately, Pu can be reduced directly by the bacteria. Besides Fe, contaminated sites often contain strong complexing ligands, such as nitrilotriacetic acid (NTA). We used biogeochemical modeling to interpret the experimental fate of Pu in the absence and presence of ferric iron (Fe 3+ ) and NTA under anaerobic conditions. In all cases, Shewanella alga BrY (S. alga) reduced Pu(V)(PuO 2 + ) to Pu(III), and experimental evidence indicates that Pu(III) precipitated as PuPO 4(am) . In the absence of Fe 3+ and NTA, reduction of PuO 2 + was directly biotic, but modeling simulations support that PuO 2 + reduction in the presence of Fe 3+ and NTA was due to an abiotic stepwise reduction of PuO 2 + to Pu4+, followed by reduction of Pu 4+ to Pu 3+ , both through biogenically produced Fe 2+ . This means that PuO 2 + reduction was slowed by first having Fe 3+ reduced to Fe 2+ . Modeling results also show that the degree of PuPO 4(am) precipitation depends on the NTA concentration. While precipitation out-competes complexation when NTA is present at the same or lower concentration than Pu, excess NTA can prevent precipitation of PuPO 4(am) .

54 ENVIRONMENTAL SCIENCES↗

Barriers to carriers: faults and recombination in non-stoichiometric perovskite scintillators

Abstract Tuning the efficiency and speed of charge carrier recombination in inorganic scintillators can potentially improve their performance in diverse applications. Recent work suggests that this maybe be achieved via a two-phase scintillator AB that naturally phase separates into A -rich and B -rich domains. In addition, a favorable electronic structure and band-edge alignment such that the charge carriers are confined or are thermodynamically driven to preferentially accumulate in one of the two domains, might lead to an improved radiative recombination rate. Here, we use density functional theory computations and ab initio molecular dynamics (AIMD), including non-adiabatic molecular dynamics (NAMD) simulations, to examine an alternative phase structure and its potential impact on recombination. Using a model perovskite SrTiO $$_3$$ 3 system with one-, two- and three-dimensional Ruddlesden–Popper (RP) phases, we demonstrate that RP faults induce band structure changes in the material that can act as barriers to carrier transport. Our AIMD/NAMD simulations indicate competing effects of a lower mean free path (potentially enhancing the desired radiative recombination and overall scintillating efficiency) and faster non-radiative recombination (undesired) due to enhanced electron–phonon coupling in the faulted system. Full exploitation of such a rational design approach would require tuning of the effective scintillation efficiency by varying the perovskite chemistry using appropriate arrangements of RP faults in the bulk material. Finally, other effects, such as the tendency of point defects to segregate at the interface, that might affect the overall performance, are briefly discussed. We expect the basic results found here to apply to other nanostructured scintillators. Graphical Abstract

36 MATERIALS SCIENCE↗

Review of computational approaches to predict the thermodynamic stability of inorganic solids

Improvements in the efficiency and availability of quantum chemistry codes, supercomputing centers, and open materials databases have transformed the accessibility of computational materials design approaches. Thermodynamic stability predictions play a central role in the efficacy of these approaches and should be considered carefully. This review covers the fundamentals of calculating thermodynamic stability using first-principles methods. Stability is delineated into two main topics — stability with respect to decomposition into competing phases and stability with respect to phase transition into alternative structures at fixed composition. For each topic, a summary of the state-of-the-art is provided along with a tutorial overview of practical considerations. The application of machine learning to both kinds of stability predictions is also covered. Finally, the limitations of thermodynamic stability predictions are discussed within the context of predicting the synthesizability of materials.

36 MATERIALS SCIENCE↗

Structural metamaterials with innate capacitive and resistive sensing

Interpenetrating lattices consist of two or more interwoven but physically separate sub-lattices with unique behaviors derived from their multi-body construction. If the sublattices are constructed or coated with an electrically conducting material, the close proximity and high surface area of the electrically isolated conductors allow the two lattices to interact electromagnetically either across the initial dielectric filled gap or through physical contact. Furthermore, changes in the size of the dielectric gap between the sub-lattices induced by deformation can be measured via capacitance or resistance, allowing a structurally competent lattice to operate as a force or deformation sensor. In addition to resistive and capacitive deformation sensing, this work explores capacitance as a fundamental metamaterial property and the environmental sensing behaviors of interpenetrating lattices.

Computational Solid Mechanics↗

Potential Early Markets for Fusion Energy

We examine potential early markets for fusion energy and their projected cost targets, based on analysis and synthesis of many relevant, recent studies and reports. Seeking to provide guidance to ambitious fusion developers aspiring to enable commercial deployment before 2040, we examine cost requirements for fusion-generated electricity, process heat, and hydrogen production based on today’s market prices but with various adjustments relating to possible scenarios in 2035, such as ‘‘business-as-usual,’’ high renewables penetration, and carbon pricing up to 100 $/tCO 2 . Key findings are that fusion developers should consider focusing initially on high-priced global electricity markets and consider including integrated thermal storage, depending on techno-economic factors, in order to maximize revenue and compete in markets with high renewables penetration. Process heat and hydrogen production will be tough early markets for fusion, but may open up to fusion as markets evolve and if fusion’s levelized cost of electricity falls below 50 $/MWh e . Finally, we discuss potential ways for a fusion plant to increase revenue via cogeneration (e.g., desalination, direct air capture, or district heating) and to lower capital costs (e.g., by minimizing construction times and interest or by retrofitting coal plants).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Review on Organic Polymer-Based Thermoelectric Materials

Converting heat energy directly into useable electricity by harvesting low-cost energy resources, such as solar energy and the waste heat, has attracted great interest recent years. Thermoelectricity offers a promising technology to convert heat from solar energy and to recover waste heat from industrial sectors and automobile exhausts. Classically, a number of inorganic compounds have been considered as the best thermoelectric materials. Organic materials in particular intrinsically conducting polymers had been considered as competitors of classical thermoelectric since their figure of merit has been improved several orders of magnitude in last year. In addition, the applications of thermoelectric polymers at low temperatures have shown various advantages such as easy and low cost of fabrication, light weight, and flexibility. Therefore, organic thermoelectric materials will be the best candidates to compete with inorganic materials in the future. In this review, we focused on exploring different types of organic thermoelectric materials and the factors affecting their thermoelectric properties, and discussed various strategies to improve the performance of thermoelectric materials. In addition, a review on theoretical studies of thermoelectric transport in polymers is also given.

36 MATERIALS SCIENCE↗

Contribution of Catalytic Transesterification Reactions to the Compatibilization of Poly(lactic acid)/Polycarbonate Blends: Thermal, Morphological and Viscoelastic Characterization

Samarium acetylacetonate (Sm-Acac) was added to catalyze interchange reactions between poly(lactic acid) (PLA) and polycarbonate (PC) in order to promote compatibilization and enhance the performances of the PLA/PC blend. The effects of the composition and catalyzed transesterification reactions were investigated using differential scanning calorimetry (DSC), thermogravimetry (TG), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). DMTA and DSC analysis revealed the immiscibility of the uncatalyzed PLA/PC blends for the studied compositions because the glass transition temperatures of PC and PLA were unchanged after blending. In the PLA glassy region, PLA/PC blends exhibited lower storage moduli which increased upon heating due to the cold crystallization process. During melt mixing with Sm-Acac catalyst, PLA/PC blends were submitted to two competing processes. In one hand, Sm-Acac acted as a plasticizer and contributed in decreasing significantly the glass transition, crystallization and melting temperatures of PLA phase. In the other hand, Sm-Acac proved its efficiency in catalyzing the transesterification reactions that were evidenced by the decrease of the PLA aptitude to crystallization due to the hindering effect of the PC units inserted into the PLA chains. PLA/PC blends melt mixed with 0.25% of Sm-Acac showed a significant strengthening effect, corresponding to an increase in the storage modulus in the temperature range comprised between 70 and 90 °C. This indicated the formation of a copolymer at the interface and the promotion of adhesion as it is confirmed from the decrease in the height of the PLA Tan δ peak. At 0.5% of Sm-Acac, (90/10) PLA/PC blend revealed a new peak assigned to the glass transition of the PLA-PC copolymer, whereas the (50/50) PLA/PC blend was converted into a new random copolymer. TG analysis proved the presence of a copolymer structure presenting an intermediate thermal stability in both the catalyzed and uncatalyzed blends.

36 MATERIALS SCIENCE↗

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu{sup 2+} and Cd{sup 2+}, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.

36 MATERIALS SCIENCE↗

Half-Metallic and Half-Semiconductor Gaps in Cr-Based Chalcogenides: DFT + U Calculations

Using full-potential linear-augmented plane waves plus local orbitals (FP-LAPW) method, within the generalized gradient approximation (GGA) and GGA + U (Hubbard Coulomb onsite correction) as well as the modified Becke-Johnson approach (mBJ-GGA and mBJ-GGA + U), we have carried out a systematic investigation of the structural, electronic, and magnetic properties of CrS, CrSe, and CrTe compounds in two competing phases: the zinc-blende (ZB) and wurtzite (WZ) structures. We obtained half-metallic (HM) gaps of 1.35 (2.32), 1.65 (2.49), and 1.52 (1.80) for the CrS, CrSe, and CrTe compounds, respectively, in the ZB phase within the GGA + U (mBJ-GGA + U) approach. The HM gaps are 1.78, 2.11, and 1.53 for CrS, CrSe, and CrTe compounds, respectively, in the WZ phase using the GGA + U. Notably, the CrSe and CrTe using the mBJ-GGA + U approach are a half-semiconductor (HSC) in the WZ phase. The HSC gaps are 0.94 and 0.25 eV for CrSe and CrTe compounds, respectively, while CrS has a HM gap of 2.30 eV. We observed a HSC-to-HM transition for the CrSe and CrTe crystal structures on application of strain. The CrS, CrSe, and CrTe compounds have a total magnetic moment of 4.0 µ{sub B} per formula unit with the magnetization predominantly from the Cr ion. The main features observed from the density of states and strain evolution should motivate further experimental exploration on the possible application of the CrS, CrSe, and CrTe compounds for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties and Mössbauer Investigations of La{sub 0.67}Sr{sub 0.33}Fe{sub x}Mn{sub 1−x}O{sub 3} (x = 0 and 0.5) Perovskites

We report magnetic phase separation in pure La{sub 0.67}Sr{sub 0.33}Fe{sub x}Mn{sub 1−x}O{sub 3} (x = 0 and 0.5) ceramic samples. Rhombohedral crystal structures obtained with R3C space group show no significant changes in the lattice structures due to the close values of ionic radii of Fe{sup 3+} and Mn{sup 3+} ions. However, significant changes occur in the magnetic properties due to competing ferromagnetic (FM) and antiferromagnetic (AFM) interactions because of the presence of Fe{sup 3+} substitution. The FM double exchange interactions (DE) (Mn{sup 3+}–O–Mn{sup 4+}) appears suppressed by AFM superexchange interactions (Fe{sup 3+}–O–Mn{sup 4+}, Fe{sup 3+}–O–Fe{sup 3+}, Mn{sup 4+}–O–Mn{sup 4+}). The saturation magnetization for x = 0 has the highest value of approximately 80 emu/g at 2 K, which dropped significantly to approximately 5 emu/g at 2 K for the x = 0.5 sample. The coercivity (H{sub c}) for x = 0.5 increased from 161 Oe at 300 K to 786 Oe at 2 K compared with that of x = 0 which varied from 110 to 150 Oe. A value of H{sub c}(0) = 1.5 ± 0.04 kOe was extrapolated from the model fit to the temperature dependence of H{sub c}. The temperature-dependent {sup 57}Fe Mössbauer spectroscopy measurements show the presence of Fe in two different environments that have an AFM Fe{sup 3+}–O–Mn{sup 4+} and Fe{sup 3+/2+}–O–Fe{sup 3+/2+} coordination. The unequal fraction population of Fe ions at both AFM environments seems to increase the exchange bias effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal Structure, Magnetic and Electrical Properties of Half-Doped Chromium Manganite La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3}

Polycrystalline sample La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3} (LSMCO) was prepared by a conventional solid-state reaction method in the air, and its structure was determined by Rietveld refinement using consistent resolution time-of-flight X-ray diffraction. Different structural models have been used for analysis of X-ray diffraction data recorded at room temperature, but the best fits have been found using a mixture of rhombohedral and an orthorhombic structural phases (42(1)%/57(1)%). The rhombohedral, centro-symmetric space group R 3-bar c(No.167,a≈√2a{sub p},c≈2√3a{sub p},Z=6) with octahedral tilting scheme a{sup −}a{sup −}a{sup −} leading to a three identical out-of-phase tilt angle of (Mn/Cr)-O{sub 6} octahedron along three perovskite main directions: x, y, and z-axes. The orthorhombic space group Pbnm(No.62,a≈b≈√2a{sub p},c≈2a{sub p},Z=4) with octahedral tilting scheme a{sup −}a{sup −}c{sup +}, leads to an anti-phase tilts of the same magnitude about [100] and [010] directions of the elementary specimen cell and in-phase tilt of different magnitude about the [001] direction. At low temperature 10 K, Rietveld refinement of powder diffraction data revealed that the crystal structure of sample is distorted with a single orthorhombic symmetry (space group Pbnm). Magnetic measurements indicate that our investigated sample exhibits an overall anti-ferromagnetic behavior mainly attributed to the frustration induced by both competing AFM Cr{sup 3+}-O-Cr{sup 3+}, Mn{sup 4+}-O-Mn{sup 4+} networks, and the mixed one Mn{sup 4+}-O-Cr{sup 3+}exchange magnetic interactions. The temperature dependence of the resistivity measured under zero field shows a semi-conducting behavior in the whole temperature range, which probably could be described by the adiabatic small polaron hoping model with relatively high polaron activation energy.

36 MATERIALS SCIENCE↗

Magnetic Properties of the Dilute Magnetic Semiconductor Zn{sub 1-x}Co{sub x}O Nanoparticles

The magnetic properties of the dilute magnetic semiconductor (DMS) are due the existence of two competing interactions, a direct ferromagnetic interaction and an indirect antiferromagnetic interaction. This is well established in the Zn{sub 1-x}Mn{sub x}O DMS, but is controversy in the Zn{sub 1-x}Co{sub x}O DMS. To gain insights, a series of Co-substituted ZnO NRs (x = 0, 0.01, 0.02, 0.03, 0.04, and 0.05) have been fabricated using a low-temperature hydrothermal method. The magnetization of these Co-doped ZnO NPs was measured with a vibrating sample magneto-meter. Expressing the magnetization results in units of Bohr magnetons per Co ions, it is found that the ferromagnetic contributions become more dominant as more magnetic Co ions are doped into the ZnO NPs. X-ray diffraction, energy dispersive X-ray, scanning electron microscopy, and photoluminescence measurements were done to characterize the Co:ZnO NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗