Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

An overview of some investigations of pressure and thermal distributions induced by trailing edge controls on hypersonic aircraft

Detailed surface heat transfer and pressure distributions have been obtained in three-dimensional shock-wave boundary-layer interactions flow regions. The data described were obtained on fundamental shapes: planar wings with trailing edge flaps or spoilers and planar or cylindrical center bodies, representative of the aft portion of hypersonic aircraft. An overview of the work is presented; details of the projects are available in many reports in the open literature. Analytic, empiric methods are advanced for predicting the extent of separation and the increased heat transfer and pressure loads in three-dimensional separated flow regions.

Kaufman, Louis G., II↗
NASA NTRS1991

Nonlinear feedbacks between stratocumulus and synoptic-scale systems

The research progress for FY-91 is presented. Wintertime and springtime stratocumulus observations for a number of 5-day periods were collected. Close correlations between the mean 850 and 500 mb trough positions and cloud cover over marine areas were found. A linear study of the radiatively-driven interaction between stratocumulus and synoptic-scale waves was completed. Shallow surface-bound traveling waves are created that are strongly dependent on the phase relation between cloud and low-level flow. A nonlinear model is now under development that will permit a more detailed investigation of these interactions. Finally, a nonlinear study of the modifications of the background flow by boundary layer roll vortices was revised for submission for publication. The research plans for FY-92 are included.

Clark, John H. E.↗
NASA NTRS1990

The effect of small-scale roughness on the main flow profile of a laminar boundary layer

The profile distortion due to a single roughness element, to two such elements, and to many elements is investigated. Signal-averaging of the velocity difference due to the roughness being alternately present or absent is employed in order to improve accuracy. The primary objective of examining the distributed-roughness profiles for any evidence of instability-enhancing form is not met, but the results are reconsidered, and relevant hypotheses and suggestions are presented. It is noted that the reason for not meeting the objective of estimating Tollmien-Schlichting amplification from rough-wall profiles is that much of the distortion occurs close to the wall and below the element tops.

Kendall, James M., Jr.↗
NASA NTRS1992

Initial operation of the UTA shock tunnel

Initial experience in operating a small UTA (University of Texas at Arlington) shock tunnel at high Reynolds numbers for perfect gas simulation of hypersonic flow and boundary layer studies is described. Particular attention is given to tradeoffs between various constraints for achieving the test requirements, and methods for obtaining precise control of test conditions and protecting low-range pressure transducers from overpressure damage.

Lu, Frank K.↗
NASA NTRS1993

CFD zonal modeling of leading-edge ice effects for a complete aircraft

A simplified, uncoupled zonal procedure was utilized to assess the capability of numerically simulating icing effects on a Boeing 727-200 aircraft. The computational approach combines potential flow, plus boundary layer simulations by VSAERO for the un-iced aircraft forces and moments, with Navier-Stokes simulations by ARC3D for the incremental forces and moments due to iced components. These are compared with wind tunnel longitudinal force and moment data. Although the computational results compared favorably with the test data in the linear angle of attack range, it is clear that for general aircraft icing calculations, a multiblock Navier-Stokes code will be required for the viscous component of this zonal method.

Summa, J. M.↗
NASA NTRS1947

The stability of the laminar boundary layer in a compressible fluid

Report is a continuation of a theoretical investigation of the stability of the laminar boundary layer in a compressible fluid. An approximate estimate for the minimum critical Reynolds number, or stability limit, is obtained in terms of the distribution of the kinematic viscosity and the product of the mean density and mean vorticity across the boundary layer. The extension of the results of the stability analysis to laminar boundary-layer gas flows with a pressure gradient in the direction of the free stream is discussed. (author)

Lees, Lester↗
NASA NTRS1936

Air Flow in a Separating Laminar Boundary Layer

The speed distribution in a laminar boundary layer on the surface of an elliptic cylinder, of major and minor axes 11.78 and 3.98 inches, respectively, has been determined by means of a hot-wire anemometer. The direction of the impinging air stream was parallel to the major axis. Special attention was given to the region of separation and to the exact location of the point of separation. An approximate method, developed by K. Pohlhausen for computing the speed distribution, the thickness of the layer, and the point of separation, is described in detail; and speed-distribution curves calculated by this method are presented for comparison with experiment.

Schubauer, G B↗
NASA NTRS1995

An approximate theoretical method for modeling the static thrust performance of non-axisymmetric two-dimensional convergent-divergent nozzles

An analytical/numerical method has been developed to predict the static thrust performance of non-axisymmetric, two-dimensional convergent-divergent exhaust nozzles. Thermodynamic nozzle performance effects due to over- and underexpansion are modeled using one-dimensional compressible flow theory. Boundary layer development and skin friction losses are calculated using an approximate integral momentum method based on the classic karman-Polhausen solution. Angularity effects are included with these two models in a computational Nozzle Performance Analysis Code, NPAC. In four different case studies, results from NPAC are compared to experimental data obtained from subscale nozzle testing to demonstrate the capabilities and limitations of the NPAC method. In several cases, the NPAC prediction matched experimental gross thrust efficiency data to within 0.1 percent at a design NPR, and to within 0.5 percent at off-design conditions.

Hunter, Craig A.↗
NASA NTRS1995

Effects of cavity dimensions, boundary layer, and temperature on cavity noise with emphasis on benchmark data to validate computational aeroacoustic codes

This report documents the results of an experimental investigation on the response of a cavity to external flowfields. The primary objective of this research was to acquire benchmark of data on the effects of cavity length, width, depth, upstream boundary layer, and flow temperature on cavity noise. These data were to be used for validation of computational aeroacoustic (CAA) codes on cavity noise. To achieve this objective, a systematic set of acoustic and flow measurements were made for subsonic turbulent flows approaching a cavity. These measurements were conducted in the research facilities of the Georgia Tech research institute. Two cavity models were designed, one for heated flow and another for unheated flow studies. Both models were designed such that the cavity length (L) could easily be varied while holding fixed the depth (D) and width (W) dimensions of the cavity. Depth and width blocks were manufactured so that these dimensions could be varied as well. A wall jet issuing from a rectangular nozzle was used to simulate flows over the cavity.

Ahuja, K. K.↗
NASA NTRS1996

Loss Mechanisms and Unsteady Flows in Turbomachines

The Conference Proceedings contains 42 papers presented at the Propulsion and Energetics Panel 85th Symposium on Loss Mechanisms and Unsteady Flows in Turbomachines which was held from 8-12 May 1995, in Derby, UK. Sessions: Cascade Steady Flow Mechanisms and Losses (9 papers); Steady Flow Clearance and Injection Flow Mechanisms and Losses (6); Steady Secondary Flows and Shock Boundary Layer Interaction (3); Blade Section-Wake Boundary layer Interaction (6); Management of Unsteady Flows (10); Blade Interactions (8). The Symposium contributes to improving the efficiency and operation of turbomachinery also in off-design conditions by application of experimental and computational fluid dynamics methods. Multi-stage methods and positive loss management in the design stage have been identified as next steps. This will yield optimized engines of high efficiency for expanded flight envelopes including active control of the plane movement at high reliability levels.

Advisory Group for Aerospace Research and Developm↗
NASA NTRS1996

Hypersonic Wind Tunnels: Latest Citations from the Aerospace Database

The bibliography contains citations concerning the design, construction, operation, performance, and use of hypersonic wind tunnels. References cover the design of flow nozzles, diffusers, test sections, and ejectors for tunnels driven by compressed air, high-pressure gases, or cryogenic liquids. Methods for flow calibration, boundary layer control, local and freestream turbulence reduction, and force measurement are discussed. Intrusive and non-intrusive instrumentation, sources of measurement error, and measurement corrections are also covered. The citations also include the testing of inlets, nozzles, airfoils, and other components of hypersonic aerospace vehicles. Comprehensive coverage of supersonic and blowdown wind tunnels, and force balance systems for wind tunnels are covered in separate bibliographies.

BIBLIOGRAPHIES↗
NASA NTRS1996

Supersonic Wind Tunnels (Latest Citations from the Aerospace Database)

The bibliography contains citations concerning the design, construction, operation, performance, and use of supersonic wind tunnels. References cover the design of flow nozzles, diffusers, test sections, and ejectors for tunnels driven by compressed air, high-pressure gases, or cryogenic liquids. Methods for flow calibration, boundary layer control, local and freestream turbulence reduction, and force measurement are discussed. Instrusive and non-intrusive instrumentation, sources of measurement error, and measurement corrections are also covered. The citations also include the testing of inlets, nozzles, airfoils, and other components of aerospace vehicles that must operate supersonically. Comprehensive coverage of wind tunnel force balancing systems, and blowdown and supersonic wind tunnels are covered in separate bibliographies.(Contains 50-250 citations and includes a subject term index and title list.)

WIND TUNNELS↗