Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Toughening of Boron Carbide Composites by Hierarchical Microstructuring

Due to a unique combination of properties including high hardness, low density, chemical and thermal stability, semi-conductivity, and high neutron absorption, boron carbide (B4C) is a potential candidate for various applications involving extreme environment. However, B4C’s current application is limited because of its low fracture toughness. In this study, a hierarchical microstructure design with features including TiB2 grains and graphite platelets was used to toughen B4C by simultaneously utilizing multiple toughening mechanisms including crack deflection, bridging, and micro-crack toughening. Using field-assisted sintering technology (FAST), B4C composites with dense and hierarchical microstructure were fabricated. Previously, the fracture toughness of fabricated B4C composites was measured at micro-scale using micro-indentation to have up to 56% improvement. In this work, the B4C composites’ fracture toughness was characterized at macro-scale using four-point bending methods and compared with previous results obtained at micro-scale. Micromechanics modeling of fracture behaviors for B4C-TiB2 composites was also performed to evaluate the contributions from experimentally observed toughening mechanisms. From four-point bending tests, B4C composites reinforced with both TiB2 grains (~15 vol%) and graphite platelets (~8.7 vol%) exhibited the highest fracture toughness enhancement from 2.38 to 3.65 MPa∙m^(1/2). The measured values were lower than those obtained using micro-indentation but maintained the general trends. The discrepancy between the indentation and four-point bending test results originated from the complex deformation behaviors triggered by the high contact load during indentation tests. Through micromechanics modeling, introduced thermal residual stress due to thermal expansion mismatch between B4C and TiB2, and weak interphases at B4C-TiB2 boundaries were identified as the main causes for experimentally observed toughness enhancement. These results proved the effectiveness of hierarchical microstructure designs for B4C toughening and can provide reference for the future design of B4C composites with optimized microstructures for further fracture toughness enhancement.

composites↗

Multiscale Analysis of Thermo-Mechanical Behavior of Boron Nitride-Reinforced Epoxy Nanocomposites

The effect of size, shape, morphology, and arrangement of micro constituents of Boron Nitrite (BN) nanoplatelet/epoxy composites on their properties were investigated using a multi scale approach that includes Molecular Dynamics (MD) and micromechanics. The thermo-mechanical properties of the composites were evaluated using molecular theory and the analysis showed that the elastic constants of BN/epoxy composites were not severely affected by temperature. Also, the micromechanical analysis of Generalized Method of Cells (GMC) was utilized at higher length scale to evaluate elastic properties of the composites, for different geometries and arrangements of micro constituents. The predicted results of the analysis showed that the size, aspect ratios, morphology, and the arrangements of inclusions in BN/epoxy nanocomposites all have remarkable effect on the mechanical performances of the material systems.

nanocomposites↗

Engineered Interfaces in Extruded Polyphenylsulfone- Boron Nitride Composite Insulation

Improving matrix-filler interactions is critical for optimizing dielectric performance in composite insulation; however, the technique used to an introduce inorganic filler into organic matrices varies in its ability to satisfactorily reduce the size of cavities and interfaces. This study reports how sample rheology influenced the dielectric performance and thermal conductivity of extruded polyphenylsulfone (PPSU) – hexagonal boron nitride (BN) composite insulation through changing the BN incorporation strategy. Depending on the technique used to introduce BN into the host matrix, the low melt viscosity, torque, and melt viscosity temperature of the polymer were reduced, enabling better mixing, heat transfer, and smaller voids. This corresponded to an increase in dielectric strength compared to other formulations; however, the thermal conductivity shifted further away from the thermal conductivity target of 1 W/m·K target, which was an indication of a larger separation distance between the particles in samples with smaller interfaces. A trade-off between dielectric strength and thermal conductivity may exist when maximizing thermal conduction without sacrificing dielectric strength.

polyphenylsulfone↗

Engineered Interfaces in Extruded Polyphenylsulfone-Boron Nitride Composite Insulation

Improving matrix-filler interactions is critical for optimizing dielectric performance in composite insulation; however, the technique used to introduce inorganic fillers into an organic matrix varies in its ability to satisfactorily reduce the size of cavities and interfaces. This study reports effects from changing the filler incorporation strategy on the rheology, dielectric performance and thermal conductivity of extruded polyphenylsulfone (PPSU) – hexagonal boron nitride (hBN) composite insulation. Depending on the technique used to introduce BN into the host matrix, the viscosity, torque, and melt viscosity temperature of the polymer were reduced, enabling better mixing, heat transfer, and smaller voids. This corresponded to an increase in dielectric strength compared to other formulations at either a similar or lower filler loading. On the other hand, the thermal conductivity in these specimens shifted further away from the thermal conductivity target of 1 W/m·K, which was an indication of a larger separation distance between the particles in samples with smaller interfaces. A trade-off between dielectric strength and thermal conductivity may exist when maximizing thermal conduction without sacrificing dielectric strength.

Polyphenylsulfone↗

Intercalation and Exfoliation of Hexagonal Boron Nitride

Innovators at NASA's Glenn Research Center have made several breakthroughs in treating hexagonal boron nitride (hBN) nanomaterials, improving their properties to supplant carbon nanotubes in many applications. These advances have hBN nanomaterials set to transform applications such as heat sinks, electrical insulators, lightweight piezoelectric polymers for satellites and unmanned aerial vehicles, ceramic composites for jet engines, biomedical components, and radiation shielding technology.

Hexagonal Boron Nitride↗

Modification of Hexagonal Boron Nitride with Metal Oxides

The development of multifunctional hexagonal boron nitride (hBN) materials aims to capitalize on the intrinsic properties of hBN which include being electrically insulating, thermally conductive, and chemically and thermally stable at high temperatures. The creation of novel composite materials that include these properties is required to address our current aerospace and space engineering challenges. Researchers at NASA Glenn have done significant prior work which has produced processes to intercalate, exfoliate, coat, and functionalize various hBN materials. This presentation covers our recent progress towards the integration of titanium oxides into hBN utilizing our previous methods along with optimizing and producing new methods to create novel functional hBN nanomaterials.

boron nitride↗

Laser Sintering of RTM385-SLS Thermoset Polyimides With Boron Nitride

RTM385-SLS is a melt-processable thermoset polyimide resin specially formulated with a complex melt viscosity (ƞ*) of ~104-105 poise for laser sintering. RTM385-SLS resin powder was mixed with 20-25% of hexagonal boron nitride (h-BN) and subjected to laser sintering (LS) to print out “Green” disks and dogbone specimens which could be further post-cured in an oven to complete the crosslinking of the reactive phenylethynyllphthalic anhydride (PEPA) terminal groups within the resin to achieve a very high glass transition temperature (T g ) of 385°C. The cured composite specimens were then subjected to thermal analysis, thermal conductivity measurement and mechanical testing for characterization.

Additive manufacturing↗

Engineered Hexagonal Boron Nitride:Titanium Dioxide Composites for High Voltage Insulation

Hexagonal boron nitride (hBN) and Titanium dioxide are both ceramic materials with widespread use in commercial and consumer applications in everything from cosmetics and paint to deep space satellite components. As a dielectric material, hBN is electrically insulating, thermally conductive, and stable to most temperatures and environments. Titanium dioxide is also a good electrical insulator with a wide bandgap and large dielectric constant, as well as high temperature tolerance and chemical stability. This presentation covers our recent efforts to combine the best properties of hBN and titanium dioxide to produce an intercalated hBN:titanium dioxide composite which was then further processed and incorporated into polymer composites, as well as a standalone ceramic material for testing as a novel insulation material.

boron nitride↗

Electrical Endurance to Extrinsic Aging of Polyphenylsulfone-Boron Nitride Composite Insulation for Aeronautical Power Systems

Various insulating materials which can be potentially used in energy application, especially in electrified transportation, are investigated in this paper. They are based on Polyphenylsulfone matrix filled by macro and nano hexagonal Boron-nitride particles. Our study focuses on electrical properties, particularly endurance to partial discharges. Upon developing an original testing procedure and adequate partial discharge inception modeling, it is shown that that the h-BN micron and nano fillers can significantly improve the dielectric strength and resistance of PPSU to extrinsic aging, even in comparison with the insulating material typically used for electrified transportation, i.e., corona resistant polyimide. Also, a new diagnostic marker, extracted from partial discharge monitoring and analytics obtained by an innovative software, i.e., the likelihood surface discharge identification, seems to be very promising for dynamic residual life prediction for an insulation system subjected to surface discharges.

Polyphenylsulfone (PPSU)↗

High Yield Exfoliation of a Sub-Micron Hexagonal Boron Nitride Using a Solvent Free Method

Sodium fluoride (NaF) has been found to be an activation agent in exfoliating a hexagonal boron nitride (hBN) platelet, using solvent free method. The procedure was carried out by enhancing the intercalation of ferric chloride (FeCl3) in an intermediate step, up to 330 °C, followed by removal of the by-product at room temperature. In this research, five additional common salts including lithium fluoride, potassium fluoride, lithium chloride, sodium chloride, and potassium chloride, were examined and compared to NaF for their effectiveness in producing the most exfoliation of a commercially available sub-micron-size hBN. It was found that, all fluoride and chloride salts significantly activated the intercalation of FeCl3 into this hBN. Analyses and characterization from X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscoy revealed NaCl to be one of most effective agents without further heat treatment and the least expensive salt in the intercalating reaction and exfoliation process. The synthetic route of this solvent free method is straightforward with 89% yield and above which can be produced on a large scale.

boron nitride↗

Tumor blood vessel "normalization" improves the therapeutic efficacy of boron neutron capture therapy (BNCT) in experimental oral cancer

We previously demonstrated the efficacy of BNCT mediated by boronophenylalanine (BPA) to treat tumors in a hamster cheek pouch model of oral cancer with no normal tissue radiotoxicity and moderate, albeit reversible, mucositis in precancerous tissue around treated tumors. It is known that boron targeting of the largest possible proportion of tumor cells contributes to the success of BNCT and that tumor blood vessel normalization improves drug delivery to the tumor. Within this context, the aim of the present study was to evaluate the effect of blood vessel normalization on the therapeutic efficacy and potential radiotoxicity of BNCT in the hamster cheek pouch model of oral cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Controlling Bandgap of Rippled Hexagonal Boron Nitride Membranes via Plasma Treatment

Few-layer rippled hexagonal boron nitride (h- BN) membranes were processed with hydrogen plasma, which exhibit distinct and pronounced changes in its electronic properties after the plasma treatment. The bandgaps of the h- BN membrane reduced from 5.6 eV at 0 s to 4.25 eV at 250s, which is a signature of transition from the insulating to the semiconductive regime. It typically required 250 s of plasma treatment to reach the saturation. It illustrates that twodimensional material with engineered electronic properties can be created by attaching other atoms or molecules.

08 HYDROGEN↗

Boron neutron capture therapy (BNCT) for liver metastasis: therapeutic efficacy in an experimental model

Boron neutron capture therapy (BNCT) was proposed for untreatable colorectal liver metastases. The present study evaluates tumor control and potential radiotoxicity of BNCT in an experimental model of liver metastasis. BDIX rats were inoculated with syngeneic colon cancer cells DHD/K12/TRb. Tumor-bearing animals were divided into three groups: BPA–BNCT, boronophenylalanine (BPA) ? neutron irradiation; Beam only, neutron irradiation; Sham, matched manipulation. The total absorbed dose administered with BPA–BNCT was 13 ± 3 Gy in tumor and 9 ± 2 Gy in healthy liver. Three weeks posttreatment, the tumor surface area post-treatment/pre-treatment ratio was 0.46 ± 0.20 for BPA–BNCT, 2.7 ± 1.8 for Beam only and 4.5 ± 3.1 for Sham. The pre-treatment tumor nodule mass of 48 ± 19 mgfell significantly to 19 ± 16 mg for BPA–BNCT, but rose significantly to 140 ± 106 mg for Beam only and to 346 ± 302 mg for Sham. For both end points, the differences between the BPA–BNCT group and each of the other groups were statistically significant (ANOVA). No clinical, macroscopic or histological normal liver radiotoxicity was observed. It is concluded that BPA– BNCT induced a significant remission of experimental colorectal tumor nodules in liver with no contributory liver toxicity.

99 GENERAL AND MISCELLANEOUS↗

Ames Lab 101: BAM (Boron-Aluminum-Magnesium)

Materials scientist, Bruce Cook, discusses the super hard, low friction, and lubricious alloy know as BAM (Boron-Aluminum-Magnesium). BAM was discovered by Bruce Cook and his team at the Ames Laboratory.

36 MATERIALS SCIENCE↗

Effects of Boron and Graphite Uncertainty in Fuel for TREAT Simulations

Advanced modeling techniques and current computational capacity make full core TREAT simulations possible, with the goal of such simulations to understand the pre-test core and minimize the number of required calibrations. But, in order to simulate TREAT with a high degree of precision the reactor materials and geometry must also be modeled with a high degree of precision. This paper examines how uncertainty in the reported values of boron and graphite have an effect on simulations of TREAT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of Boron Additions in Marginal Soils for Growth of Corn, Wheat, Soybean, and Switchgrass

Expansion of agricultural production in marginal or poor nutrient status soils would necessitate calibration of the various nutrients to support plant growth. Boron (B) is an important micronutrient required by plants for regulating many functions including seed and fruit development. Few studies have compared the effectiveness of different types (refined vs crushed ore) of B source on the growth of plants. We hypothesize that addition of refined granulated B fertilizer as well as granulated ores will increase plant available Ca and B in the marginal and sandy soils. A greenhouse experiment was carried out to mimic a poor soil condition, using potting media created by mixing 20 % potting mix and 80% sand. Nitrogen was applied at recommended rates. Pots were watered evenly throughout the growing season. Plant tissues were harvested, biomass recorded, dried and ground for analysis. There was no significant difference on biomass yield due to either rate or source. Here, the four B sources showed different rates of availability to corn, soybean, wheat and switchgrass. Highly soluble B source seems to be the effective among B sources. Etigran-21 was found to be toxic to soybean plants, most likely due to its high solubility.

54 ENVIRONMENTAL SCIENCES↗

Fabrication and characterization of hexagonal boron nitride powder by spray drying and calcining-nitriding technology

Hexagonal boron nitride (hBN) powder was fabricated prepared by the spray drying and calcining-nitriding technology. The effects of nitrided temperature on the phases, morphology and particle size distribution of hBN powder, were investigated. The synthesized powders were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Fourier transformed infrared spectrum, ultraviolet-visible (UV-vis) spectrum and photoluminescence (PL) spectrum. UV-vis spectrum revealed that the product had one obvious band gap (4.7 eV) and PL spectrum showed that it had a visible emission at 457 nm ({lambda}{sub ex}=230 nm). FESEM image indicated that the particle size of the synthesized hBN was mainly in the range of 0.5-1.5 {mu}m in diameter, and 50-150 nm in thickness. The high-energy ball-milling process following 900 deg. C calcining process was very helpful to obtain fully crystallized hBN at lower temperature. - Graphical abstract: hBN powder was fabricated prepared by spray drying and calcining-nitriding technology. The results indicated that spray drying and calcining-nitriding technology assisted with high-energy ball-milling process following calcined process was a hopeful way to manufacture hBN powder with high crystallinity in industrial scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of sodium / boron mole ratio on the cement solidification for sodium borate waste produced in PWR plants - 15261

A cement solidification process for treating sodium borate waste produced in pressurized water reactor (PWR) plants was studied. The process was developed to obtain a high mechanical strength of more than 10 MPa which can satisfy various countries disposal regulations. To obtain high volume reduction and high mechanical strength of the solidified product, simulated concentrated borate liquid waste was dehydrated and powdered by using a wiped film evaporator. To investigate the effect of the sodium / boron (Na/B) mole ratio on the strength of cement solidified waste, simulated concentrated borate liquid waste with Na/B mole ratio between 0.21 and 0.85 were used. Solidified cement containing powdered waste with a Na/B mole ratio 0.85 showed to excellent operability and uniaxial compressive strength. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗