Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Extension of hypersonic, high-incidence, slender-body similarity

The Sychev (1960) analysis for inviscid hypersonic flow past slender bodies at large angle of attack is shown to be applicable to all slender-body flows whose crossflow Mach numbers are greater than sonic; it is therefore not restricted to flows with hypersonic crossflow Mach number values, as indicated elsewhere in the literature. It is also noted that the Sychev similarity applies to a number of slender-body flows with subsonic crossflow Mach numbers, including incompressible flow.

Barnwell, Richard W.↗

A low-drag nose-body

In the present investigation of the application of convex-curvature viscous drag reduction to an axisymmetric body, the qualification of a modified mixing-length formulation in several complex two-dimensional and axisymmetric turbulent boundary layers that are primarily curved is followed by the design of a low-drag nose-body for low drag at high subsonic speeds. The longitudinal distribution of the cross-sectional area ratio is found to be critical to boundary layer separation, requiring implementation not over a single long span of curvature but over three short spans. The possibility of a 'net' drag reduction is examined in relation to 'equivalent' nose-bodies.

Bandyopadhyay, P. R.↗

Effects of surface perturbations on the asymmetric vortex flow over a slender body

An experimental investigation of the effects of surface perturbations on the asymmetric flow past a slender body has been conducted for laminar flow conditions. Beads with diameters ranging from 3/32 to 12/32 in. were attached near the apex of a cone/cylinder model having a base diameter of 3.5 in. and a cone semiapex angle of 9 deg at an angle of attack of 40 deg in an attempt to alter the sense of the asymmetric vortex flow pattern. Circumferential position as well as longitudinal location were varied to determine the most effective bead position. Whether or not the beads were effective in controlling the magnitude and direction of the vortex asymmetries was determined by 3 circumferential rows of pressure taps and by a helium-bubble flow visualization technique. The most effective circumferential position was found to be approximately 140 deg from the windward ray. While holding this circumferential position constant, the effect of bead size at three stations further along the body was also investigated. It was found that the size of the bead necessary to reverse the asymmetry increased more rapidly than the growth in cylinder radius. In general, these results indicate that discrete geometric imperfections on a body's surface can force asymmetry in a given direction if they are sufficiently large relative to the local radius.

Moskovitz, Cary A.↗

Electrical conductivity of carbonaceous chondrites and electric heating of meteorite parent bodies

Electromagnetic heating of rock-forming materials most probably was an important process in the early history of the solar system. Electrical conductivity experiments of representative materials such as carbonaceous chondrites are necessary to obtain data for use in electromagnetic heating models. With the assumption that carbon was present at grain boundaries in the material that comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance using the T-Tauri model of Sonett and Herbert (1977). The results are discussed.

Duba, AL↗

Drag measurements on a laminar-flow body of revolution in the 13-inch magnetic suspension and balance system

Low speed wind tunnel drag force measurements were taken on a laminar flow body of revolution free of support interference. This body was tested at zero incidence in the NASA Langley 13 in. Magnetic Suspension and Balance System (MSBS). The primary objective of these tests was to substantiate the drag force measuring capabilities of the 13 in. MSBS. The drag force calibrations and wind-on repeatability data provide a means of assessing these capabilities. Additional investigations include: (1) the effects of fixing transition; (2) the effects of fins installed in the tail; and (3) surface flow visualization using both liquid crystals and oil flow. Also two simple drag prediction codes were used to assess their usefulness in estimating overall body drag.

Dress, David A.↗

Aerodynamic interaction between vortical wakes and lifting two-dimensional bodies

Unsteady rotor wake interactions with the empennage, tail boom, and other aerodynamic surfaces of a helicopter have a significant influence on its aerodynamic performance, the ride quality, and vibration. A numerical method for computing the aerodynamic interaction between an interacting vortex wake and the viscous flow about arbitrary two-dimensional bodies was developed to address this helicopter problem. The method solves for the flow field velocities on a body-fitted computational mesh using finite-difference techniques. The interacting vortex wake is represented by an array of discrete vortices which, in turn, are represented by a finite-core model. The evolution of the interacting vortex wake is calculated by Lagrangian techniques. The viscous flow field of the two-dimensional body is calculated on an Eulerian grid. The flow around circular and elliptic cylinders in the absence of an interacting vortex wake was calculated. These results compare very well with other numerical results and with results obtained from experiment and thereby demonstrate the accuracy of the viscous solution. The interaction of a rotor wake with the flow about a 4 to 1 elliptic cylinder at 45 degree incidence was calculated for a Reynolds number of 3000. The results demonstrate the significant variations in the lift and drag on the elliptic cylinder in the presence of the interacting rotor wake.

Stremel, Paul M.↗

Tracking 3-D body motion for docking and robot control

An advanced method of tracking three-dimensional motion of bodies has been developed. This system has the potential to dynamically characterize machine and other structural motion, even in the presence of structural flexibility, thus facilitating closed loop structural motion control. The system's operation is based on the concept that the intersection of three planes defines a point. Three rotating planes of laser light, fixed and moving photovoltaic diode targets, and a pipe-lined architecture of analog and digital electronics are used to locate multiple targets whose number is only limited by available computer memory. Data collection rates are a function of the laser scan rotation speed and are currently selectable up to 480 Hz. The tested performance on a preliminary prototype designed for 0.1 in accuracy (for tracking human motion) at a 480 Hz data rate includes a worst case resolution of 0.8 mm (0.03 inches), a repeatability of plus or minus 0.635 mm (plus or minus 0.025 inches), and an absolute accuracy of plus or minus 2.0 mm (plus or minus 0.08 inches) within an eight cubic meter volume with all results applicable at the 95 percent level of confidence along each coordinate region. The full six degrees of freedom of a body can be computed by attaching three or more target detectors to the body of interest.

Donath, M.↗

Recursive dynamics of topological trees of rigid bodies via Kalman filtering and Bryson-Frazier smoothing

The inverse and forward dynamics problems for a set of rigid bodies connected by hinges to form a topological tree are solved by using recursive techniques from linear filtering and smoothing theory. An inward filtering sequence computes a set of constraint moments and forces. This is followed by an outward sequence to determine a corresponding set of angular and linear accelerations. An inward sequence begins at the tips of all of the terminal bodies of the tree and proceeds inwardly through all of the branches until it reaches the root. Similarly, an outward sequence begins at the root and propagates to all of the tree branches until it reaches the tips of the terminal bodies. The paper also provides an approach to evaluate recursively the composite multibody system inertia matrix and its inverse.

Rodriguez, G.↗

Viscous shock-layer solutions for the low-density hypersonic flow past long slender bodies

Results are obtained for the surface pressure, drag, heat-transfer, and skin-friction coefficients for hyperboloids and sphere cones. Body half angles from 5 to 22.5 degrees are considered for various low-density flow conditions. Recently obtained surface-slip and shock-slip equations are employed to account for the low-density effects. The method of solution employed for the viscous shock-layer (VSL) equations is a partially coupled spatial-marching implicit finite-difference technique. The flow cases analyzed include highly cooled long slender bodies in high Mach number flows. The present perfect-gas VSL calculations compare quite well with available experimental data. Results have also been obtained from the steady-state Navier-Stokes (NS) equations by successive approximations. Comparison between the NS and VSL results indicates that VSL equations even with body and shock-slip boundary conditions may not be adequate in the stagnation region at altitudes greater than about 75 km for the cases analyzed here.

Gupta, R. N.↗

The dynamics of charged particles in the near wake of a very negatively charged body - Laboratory experiment and numerical simulation

A numerical simulation that is cylindrical in configuration space and three-dimensional in velocity space has been initiated to test a model for the near-wake dynamics of a very negatively charged body, with reference to the plasma environment around spacecraft. The simulation parameters were closely matched to those of a laboratory experiment so that the results can be compared directly. The laboratory study showed that the electrons and ions can display different temporal features in the filling-in of the wake; and that they can both be found within one body diameter of an object with a highly negative body potential. It was also found that the temperature of the electrons in the very near wake could be somewhat colder than the ambient value, suggesting the possibility of a filtering mechanism being operative there. The simulation results to date largely corroborate the density findings.

Morgan, M. Alvin↗

Reducing Aerodynamic Drag Of Bluff Bodies

New method found to reduce aerodynamic drag of noncircular bluff bodies like road-transport vehicles. Consists of installation of thin, flat panels on forward side of body, facing airstream. Produces streamlining effect over body. Width of wake reduced, and vortex shedding is greatly suppressed.

Taylor, Lawrence W., Jr.↗

Lumped mass formulations for modeling flexible body systems

The efforts of Mechanical Dynamics, Inc. in obtaining a general formulation for flexible bodies in a multibody setting are discussed. The efforts being supported by MDI, both in house and externally are summarized. The feasibility of using lumped mass approaches to modeling flexibility in a multibody dynamics context is examined. The kinematics and kinetics for a simple system consisting of two rigid bodies connected together by an elastic beam are developed in detail. Accuracy, efficiency and ease of use using this approach are some of the issues that are then looked at. The formulation is then generalized to a superelement containing several nodes and connecting several bodies. Superelement kinematics and kinetics equations are developed. The feasibility and effectiveness of the method is illustrated by the use of some examples illustrating phenomena common in the context of spacecraft motions.

Rampalli, Rajiv↗

Evolution of carbonaceous chondrite parent bodies: Insights into cometary nuclei

It is thought that cometary samples will comprise the most primitive materials that are able to be sampled. Although parent body alteration of such samples would not necessarily detract from scientists' interest in them, the possibility exists that modification processes may have affected cometary nuclei. Inferences about the kinds of modifications that might be encountered can be drawn from data on the evolution of carbonaceous chondrite parent bodies. Observations suggest that, of all the classes of chondrites, these meteorites are most applicable to the study of comets. If the proportion of possible internal heat sources such as Al-26 in cometary materials are similar to those in chondrites, and if the time scale of comet accretion was fast enough to permit incorporation of live radionuclides, comets might have had early thermal histories somewhat like those of carbonaceous chondrite parent bodies.

Mcsween, Harry Y., Jr.↗

A nearly-linear computational-cost scheme for the forward dynamics of an N-body pendulum

The dynamic equations of motion of an n-body pendulum with spherical joints are derived to be a mixed system of differential and algebraic equations (DAE's). The DAE's are kept in implicit form to save arithmetic and preserve the sparsity of the system and are solved by the robust implicit integration method. At each solution point, the predicted solution is corrected to its exact solution within given tolerance using Newton's iterative method. For each iteration, a linear system of the form J delta X = E has to be solved. The computational cost for solving this linear system directly by LU factorization is O(n exp 3), and it can be reduced significantly by exploring the structure of J. It is shown that by recognizing the recursive patterns and exploiting the sparsity of the system the multiplicative and additive computational costs for solving J delta X = E are O(n) and O(n exp 2), respectively. The formulation and solution method for an n-body pendulum is presented. The computational cost is shown to be nearly linearly proportional to the number of bodies.

Chou, Jack C. K.↗

Multi-flexible-body dynamics capturing motion-induced stiffness

A multi-flexible-body dynamics formulation incorporating a recently developed theory for capturing motion induced stiffness for a arbitrary structure undergoing large rotation and translation accompanied by small vibrations is presented. In essence, the method consists of correcting prematurely linearized dynamical equations for an arbitrary flexible body with generalized active forces due to geometric stiffness corresponding to a system of twelve inertia forces and nine inertia couples distributed over the body. Equations of motion are derived by means of Kane's method. A useful feature of the formulation is its treatment of prescribed motions and interaction forces. Results of simulations of motions of three flexible spacecraft, involving stiffening during spinup motion, dynamic buckling, and a repositioning maneuver, demonstrate the validity and generality of the theory.

Banerjee, Arun K.↗

Noninvasive estimation of fluid shifts between body compartments by measurement of bioelectric characteristics

Previous research has established that bioelectrical characteristics of the human body reflect fluid status to some extent. It has been previously assumed that changes in electrical resistance (R) and reactance (X) are associated with changes in total body water (TBW). The purpose of the present pilot investigation was to assess the correspondence between body R and X and changes in estimated TBW and plasma volume during a period of bedrest (simulated weightlessness). R and X were measured pre-, during, and post- a 13 day bedrest status. Although a clear relationship was not elucidated, evidence was found suggesting that R and X reflect plasma volume rather than TBW. Indirect evidence provided by previous studies which investigated other aspects of the electrical/fluid relationship, also suggests the independence of TBW and electrical properties. With further research, a bioelectrical technique for noninvasively tracking fluid changes consequent to space flight may be developed.

Bishop, Phillip A.↗

Unsteady disturbances of streaming motions around bodies

The present investigation of flows around bodies with a stagnation point notes that the vortical part of such flows becomes singular along the entire body surface and its wake; as a result, the potential part of the flow will also be singular along the entire surface. A modified splitting of the velocity field is proposed which encompasses: (1) a vortical part having zero streamwise and normal components along the body surface; (2) an entropy-dependent part; and (3) a regular part similar to the potential part which satisfies a linear inhomogeneous wave equation with a modified source term.

Atassi, H. M.↗

Radiative configuration factors from cylinders to coaxial axisymmetric bodies

Exact solutions are obtained for the radiative configuration factor between differential elements of arbitrary orientation and cylinders. A general method is then proposed for calculating the view factor from a cylinder to a coaxial axisymmetric body using only a single numerical integration. The method is illustrated for axisymmetric bodies with function generators described by a power law equation. The method may be useful in calculating radiative heat transfer between cylindrical bodies and high-density exhaust gases and between annular radiative fins and their bases.

Saltiel, C.↗