Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atmospheric Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

North Pacific Decadal Variability in the GEOS-5 Atmosphere-Ocean Model

This study examines the mechanisms of the Pacific decadal oscillation (PDO) in the GEOS-5 general circulation model. The model simulates a realistic PDO pattern that is resolved as the first empirical orthogonal function (EOF) of winter sea surface temperature (SST). The simulated PDO is primarily forced by Aleutian low through Ekman transport and surface fluxes, and shows a red spectrum without any preferred periodicity. This differs from the observations, which indicate a greater role of El Nino-Southern Oscillation (ENSO) forcing, and likely reflects the too short time scale of the simulated ENSO. The geostrophic transport in response to the Aleutian low is limited to the Kuroshio-Oyashio Extension, and is unlikely the main controlling factor in this model, although it reinforces the Ekman-induced SST anomalies. The delay between the Aleutian low and the PDO is relatively short (1 year) suggesting that the fast Ekman response (rather than Rossby wave propagation) sets the SST pattern immediately following an Aleutian low fluctuation. The atmospheric feedback (response to the SST) is only about 25 of the forcing and never evolves into an Aleutian low completely, instead projecting onto the North Pacific Oscillation (NPO), a meridional dipole in sea level pressure (SLP). The lack of preferred periodicity and weak atmospheric response bothindicate a coupled oscillation is an unlikely mechanism for the PDO in this model. In agreement with recent studies, the NPO is correlated with the North Pacific Gyre Oscillation (NPGO), which is another leading EOF of the North Pacific SST. A possible connection between the PDO and the NPGO is discussed.

Pacific Decadal Variability↗

The Aggregate Representation of Terrestrial Land Covers Within Global Climate Models (GCM)

This project had four initial objectives: (1) to create a realistic coupled surface-atmosphere model to investigate the aggregate description of heterogeneous surfaces; (2) to develop a simple heuristic model of surface-atmosphere interactions; (3) using the above models, to test aggregation rules for a variety of realistic cover and meteorological conditions; and (4) to reconcile biosphere-atmosphere transfer scheme (BATS) land covers with those that can be recognized from space; Our progress in meeting these objectives can be summarized as follows. Objective 1: The first objective was achieved in the first year of the project by coupling the Biosphere-Atmosphere Transfer Scheme (BATS) with a proven two-dimensional model of the atmospheric boundary layer. The resulting model, BATS-ABL, is described in detail in a Masters thesis and reported in a paper in the Journal of Hydrology Objective 2: The potential value of the heuristic model was re-evaluated early in the project and a decision was made to focus subsequent research around modeling studies with the BATS-ABL model. The value of using such coupled surface-atmosphere models in this research area was further confirmed by the success of the Tucson Aggregation Workshop. Objective 3: There was excellent progress in using the BATS-ABL model to test aggregation rules for a variety of realistic covers. The foci of attention have been the site of the First International Satellite Land Surface Climatology Project Field Experiment (FIFE) in Kansas and one of the study sites of the Anglo-Brazilian Amazonian Climate Observational Study (ABRACOS) near the city of Manaus, Amazonas, Brazil. These two sites were selected because of the ready availability of relevant field data to validate and initiate the BATS-ABL model. The results of these tests are given in a Masters thesis, and reported in two papers. Objective 4: Progress far exceeded original expectations not only in reconciling BATS land covers with those that can be recognized from space, but also in then applying remotely-sensed land cover data to map aggregate values of BATS parameters for heterogeneous covers and interpreting these parameters in terms of surface-atmosphere exchanges.

Shuttleworth, W. James↗

Escape of sulfur and oxygen from Io

Charged particle sputtering is reexamined as a mechanism for escape of sulfur and oxygen from Io. Corotating ions and energetic ions are considered, using the best available determinations of ion fluxes and sputtering yields. It is unclear whether molecular SO2 is the dominant escaping neutral from Io or whether atomic O and S are dominant, but the Voyager detection of SO2(+) in the cold torus implies the presence of molecular SO2 there. Thin atmosphere models encounter serious difficulty in achieving adequate sulfur and oxygen escape rates, but they are not yet ruled out. Ionization and dissociation of SO2 in a sputter corona can dominate direct escape. In thick atmosphere models the neutral escape rates can be much higher, but the oxygen escape rate tends to be too high relative to the sulfur escape rate unless diffusive separation in the atmosphere is limited, perhaps by rapid mixing.

Cheng, A. F.↗

APOGEE Data and Spectral Analysis from SDSS Data Release 16: Seven Years of Observations Including First Results from APOGEE-South

The spectral analysis and data products in Data Release 16 (DR16; 2019 December) from the high-resolution near-infrared Apache Point Observatory Galactic Evolution Experiment (APOGEE)-2/Sloan Digital Sky Survey (SDSS)-IV survey are described. Compared to the previous APOGEE data release (DR14; 2017 July), APOGEE DR16 includes about 200,000 new stellar spectra, of which 100,000 are from a new southern APOGEE instrument mounted on the 2.5 m du Pont telescope at Las Campanas Observatory in Chile. DR16 includes all data taken up to 2018 August, including data released in previous data releases. All of the data have been re-reduced and re-analyzed using the latest pipelines, resulting in a total of 473,307 spectra of 437,445 stars. Changes to the analysis methods for this release include, but are not limited to, the use of MARCS model atmospheres for calculation of the entire main grid of synthetic spectra used in the analysis, a new method for filling “holes” in the grids due to unconverged model atmospheres, and a new scheme for continuum normalization. Abundances of the neutron-capture element Ce are included for the first time. A new scheme for estimating uncertainties of the derived quantities using stars with multiple observations has been applied, and calibrated values of surface gravities for dwarf stars are now supplied. Compared to DR14, the radial velocities derived for this release more closely match those in the Gaia DR2 database, and a clear improvement in the spectral analysis of the coolest giants can be seen. The reduced spectra as well as the result of the analysis can be downloaded using links provided on the SDSS DR16 web page.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiative heating about outer planet entry probes

A study has been conducted to define the radiative, heating-rate distributions about spherically capped, 60 deg half-angle conical entry probes to the outer planets Jupiter, Saturn, and Uranus. The radiative heating rates are calculated by a direct method for the solution of the inviscid flow equations with coupled, nongray radiative transport. Results are presented for a range of entry conditions using the atmospheric models denoted as nominal, warm, and cool for each planet which show that both the magnitude and distribution of radiative heating rate are strongly dependent on the atmospheric model and the free-stream conditions.

Sutton, K.↗

Cool zero-metallicity stellar atmospheres

Very low mass stars and brown dwarfs have low effective temperatures and their atmospheric opacities are provided by heavy elements which form a host of strongly absorbing molecules. We present a study of the atmospheres and emergent spectra of these objects in the limiting case of zero metallicity. A grid of atmosphere models is presented, based on updated opacities for H/He mixtues, in particular for the collision-induced absorption by H2 which plays an important role in these atmospheres. The emergent spectra bear little resemblance to the corresponding blackbody emission and become bluer as the effective temperature is lowered. The atmosphere models are coupled with interior calculations to obtain accurate physical and photometric characteristics for the low-mass end of the zero-metallicity main sequence. This provides a useful boundary in the Hertzsprung-Russel diagram to interpret observations of low-metallicity stars.

Saumon, D.↗

Predicting the severity of spurious “double ITCZ” problem in CMIP5 coupled models from AMIP simulations [Tropical versus extratropical origins of the spurious 'double ITCZ' in coupled climate models]

The severity of the double Intertropical Convergence Zone (DI) problem in climate models can be measured by a tropical precipitation asymmetry index (PAI), indicating whether tropical precipitation favors the Northern Hemisphere or the Southern Hemisphere. Examination of 19 Coupled Model Intercomparison Project phase 5 models reveals that the PAI is tightly linked to the tropical sea surface temperature (SST) bias. As one of the factors determining the SST bias, the asymmetry of tropical net surface heat flux in Atmospheric Model Intercomparison Project (AMIP) simulations is identified as a skillful predictor of the PAI change from an AMIP to a coupled simulation, with an intermodel correlation of 0.90. Using tropical top-of-atmosphere (TOA) fluxes, the correlations are lower but still strong. However, the extratropical asymmetries of surface and TOA fluxes in AMIP simulations cannot serve as useful predictors of the PAI change. Furthermore, this study suggests that the largest source of the DI bias is from the tropics and from atmospheric models.

54 ENVIRONMENTAL SCIENCES↗

Some Recent Developments in Numerical Modelling at ECMWF

A new atmospheric model was introduced into operational forecasting at the European Center for Medium Range Weather Forecasts, on 21 April 1983. The principal differences between this model and the Center's first operational model were in the adiabatic formulation, which, in the new model, includes use of a spectral representation in the horizontal, a more general vertical coordinate, and a modified, more-efficient, time-stepping scheme. In addition, new programming techniques and standards were adopted to facilitate both the model's use as a research tool and its adaptation to make full use of the features of the recently-acquired CRAY X-MP computer. A number of revisions were also made in detailed aspects of the formulation of the parameterization schemes. The operational change to this new model was accompanied by a second important change, namely the use of a higher envelope orography in the lower boundary conditions of the model. Problems in the operational performance of the model and development preparatory to the future operational implementation of a high resolution version of the model on the CRAY X-MP are discussed.

Simmons, A. J.↗

DAVINCI Venus Entry, Descent, and Landing Modeling and Simulation

The Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging (DAVINCI) mission will launch in June 2029 and explore Venus via two flybys and a probe landing scheduled for June 2031. The goals of the mission are to study the origin, evolution, and current state of Venus and to understand if it was habitable at a point in the past. The entry, descent, and landing (EDL) concept of operations of the probe leverages on the successful Pioneer Venus large probe mission. The science objectives of the mission levy certain requirements on the EDL system, such as landing in the scientifically important Alpha Regio Tessera and telemetering several gigabytes of instrumentation data to the orbiting relay spacecraft before the probe impacts the surface. In order to optimize the EDL sequence of the lander and to verify key driving requirements, a six degree of freedom EDL flight mechanics simulation has been created based on the best available aerodynamic and atmospheric models valid for Venus. This paper describes the EDL modeling and simulation and summarizes the current flight mechanics results for the mission.

Soumyo Dutta↗

DAVINCI Venus Entry, Descent, and Landing Modeling and Simulation

The Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging (DAVINCI) mission will launch in June 2029 and explore Venus via two flybys and a probe landing scheduled for June 2031. The goals of the mission are to study the origin, evolution, and current state of Venus and to understand if it was habitable at a point in the past. The entry, descent, and landing (EDL) concept of operations of the probe leverages on the successful Pioneer Venus large probe mission. The science objectives of the mission levy certain requirements on the EDL system, such as landing in the scientifically important Alpha Regio Tessera and telemetering several gigabytes of instrumentation data to the orbiting relay spacecraft before the probe impacts the surface. In order to optimize the EDL sequence of the lander and to verify key driving requirements, a six degree of freedom EDL flight mechanics simulation has been created based on the best available aerodynamic and atmospheric models valid for Venus. This paper describes the EDL modeling and simulation and summarizes the current flight mechanics results for the mission.

Soumyo Dutta↗

WIYN open cluster study. LXII. Comparison of isochrone systems using deep multi-band photometry of M35

The current generation of stellar isochrone models exhibits non-negligible discrepancies due to variations in the input physics. The success of each model is determined by how well it fits the observations, and this paper aims to disentangle contributions from the various physical inputs. New deep, wide-field optical and near-infrared photometry (UBVRIJHK{sub S} ) of the cluster M35 is presented, against which several isochrone systems are compared: Padova, PARSEC, Dartmouth, and Y {sup 2}. Two different atmosphere models are applied to each isochrone: ATLAS9 and BT-Settl. For any isochrone set and atmosphere model, observed data are accurately reproduced for all stars more massive than 0.7 M {sub ☉}. For stars less massive than 0.7 M {sub ☉}, Padova and PARSEC isochrones consistently produce higher temperatures than observed. Dartmouth and Y{sup 2} isochrones with BT-Settl atmospheres reproduce optical data accurately; however, they appear too blue in IR colors. It is speculated that molecular contributions to stellar spectra in the near-infrared may not be fully explored, and that future study may reconcile these differences.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimating Ocean Observation Impacts on Coupled Atmosphere‐Ocean Models Using Ensemble Forecast Sensitivity to Observation (EFSO)

Ensemble Forecast Sensitivity to Observation (EFSO) is a technique that can efficiently identify the beneficial/detrimental impacts of every observation in ensemble-based data assimilation (DA). While EFSO has been successfully employed on atmospheric DA, it has never been applied to ocean or coupled DA due to the lack of a suitable error norm for oceanic variables. This study introduces a new density-based error norm incorporating sea temperature and salinity forecast errors, making EFSO applicable to ocean DA for the first time. We implemented the oceanic EFSO on the CFSv2-LETKF and investigated the impact of ocean observations under a weakly coupled DA framework. By removing the detrimental ocean observations detected by EFSO, the CFSv2 forecasts were significantly improved, showing the validation of impact estimation and the great potential of EFSO to be extended as a data selection criterion.

54 ENVIRONMENTAL SCIENCES↗

Ks-BAND DETECTION OF THERMAL EMISSION AND COLOR CONSTRAINTS TO CoRoT-1b: A LOW-ALBEDO PLANET WITH INEFFICIENT ATMOSPHERIC ENERGY REDISTRIBUTION AND A TEMPERATURE INVERSION

We report the detection in Ks-band of the secondary eclipse of the hot Jupiter CoRoT-1b from time series photometry with the ARC 3.5 m telescope at Apache Point Observatory. The eclipse shows a depth of 0.336 +- 0.042% and is centered at phase 0.5022{sup +0.0023}{sub -0.0027}, consistent with a zero eccentricity orbit (e cos omega = 0.0035{sup +0.0036}{sub -0.0042}). We perform the first optical to near-infrared multi-band photometric analysis of an exoplanet's atmosphere and constrain the reflected and thermal emissions by combining our result with the recent 0.6, 0.71, and 2.09 mum secondary eclipse detections by Snellen et al., Gillon et al., and Alonso et al. Comparing the multi-wavelength detections to state-of-the-art radiative-convective chemical-equilibrium atmosphere models, we find the near-infrared fluxes difficult to reproduce. The closest blackbody-based and physical models provide the following atmosphere parameters: a temperature T = 2460{sup +80}{sub -160} K; a very low Bond albedo A{sub B} = 0.000{sup +0.081}{sub -0.000}; and an energy redistribution parameter P{sub n} = 0.1, indicating a small but nonzero amount of heat transfer from the day to nightside. The best physical model suggests a thermal inversion layer with an extra optical absorber of opacity kappa{sub e} = 0.05 cm{sup 2} g{sup -1}, placed near the 0.1 bar atmospheric pressure level. This inversion layer is located 10 times deeper in the atmosphere than the absorbers used in models to fit mid-infrared Spitzer detections of other irradiated hot Jupiters.

79 ASTRONOMY AND ASTROPHYSICS↗

Earth GRAM-99 and Trace Constituents

Global Reference Atmospheric Model (GRAM-99) is an engineering-level model of Earth's atmosphere. It provides both mean values and perturbations for density, temperature, pressure, and winds, as well as monthly- and geographically-varying trace constituent concentrations. From 0-27 km, GRAM thermodynamics and winds are based on National Oceanic and Atmospheric Administration Global Upper Air Climatic Atlas (GUACA) climatology. Above 120 km, GRAM is based on the NASA Marshall Engineering Thermosphere (MET) model. In the intervening altitude region, GRAM is based on Middle Atmosphere Program (MAP) climatology that also forms the basis of the 1986 COSPAR International Reference Atmosphere (CIRA). Atmospheric composition is represented in GRAM by concentrations of both major and minor species. Above 120 km, MET provides concentration values for N2, O2, Ar, O, He, and H. Below 120 km, species represented also include H2O, O3, N2O, CO, CH4, and CO2. At COSPAR 2002 a comparison was made between GRAM constituents below 120 km and those provided by Naval Research Laboratory (NRL) climatology. No current need to update GRAM constituent climatology in that height range was identified. This report examines GRAM (MET) constituents between 100 and 1000 km altitudes. Discrepancies are noted between GRAM (MET) constituent number densities and mass density or molecular weight. Near 110 km altitude, there is up to about 25% discrepancy between MET number density and mass density (with mass density being valid and number densities requiring adjustment). Near 700 km altitude there is also up to about 25% discrepancy between MET number density and mean molecular weight (with molecular weight requiring adjustment). In neither case are MET mass density estimates invalidated. These discrepancies have been traced to MET subroutines SLV (which affects 90-170 km height range) and SLVH (which affects helium above 440 km altitude). With these discrepancies corrected, results are presented to illustrate GRAM (MET) constituent mole fractions in terms of height-latitude cross sections from 100 to 1000 km altitude, and latitude-longitude 'maps' at 450 km (approximate height of International Space Station). Plans are discussed for an update of MET (and GRAM) to correct these constituent inconsistencies and to incorporate several new thermospheric model features.

Justus, C. G.↗

Overview of the MEDLI Project

The Mars Science Laboratory Entry, Descent, and Landing Instrumentation (MEDLI) Project's objectives are to measure aerothermal environments, sub-surface heatshield material response, vehicle orientation, and atmospheric density for the atmospheric entry and descent phases of the Mars Science Laboratory (MSL) entry vehicle. The flight science objectives of MEDLI directly address the largest uncertainties in the ability to design and validate a robust Mars entry system, including aerothermal, aerodynamic and atmosphere models, and thermal protection system (TPS) design. The instrumentation suite will be installed in the heatshield of the MSL entry vehicle. The acquired data will support future Mars entry and aerocapture missions by providing measured atmospheric data to validate Mars atmosphere models and clarify the design margins for future Mars missions. MEDLI thermocouple and recession sensor data will significantly improve the understanding of aeroheating and TPS performance uncertainties for future missions. MEDLI pressure data will permit more accurate trajectory reconstruction, as well as separation of aerodynamic and atmospheric uncertainties in the hypersonic and supersonic regimes. This paper provides an overview of the project including the instrumentation design, system architecture, and expected measurement response.

Gazarik, Michael J.↗

Overview of the MEDLI Project

The Mars Science Laboratory Entry, Descent, and Landing Instrumentation (MEDLI) Project s objectives are to measure aerothermal environments, sub-surface heatshield material response, vehicle orientation, and atmospheric density for the atmospheric entry and descent phases of the Mars Science Laboratory (MSL) entry vehicle. The flight science objectives of MEDLI directly address the largest uncertainties in the ability to design and validate a robust Mars entry system, including aerothermal, aerodynamic and atmosphere models, and thermal protection system (TPS) design. The instrumentation suite will be installed in the heatshield of the MSL entry vehicle. The acquired data will support future Mars entry and aerocapture missions by providing measured atmospheric data to validate Mars atmosphere models and clarify the design margins for future Mars missions. MEDLI thermocouple and recession sensor data will significantly improve the understanding of aeroheating and TPS performance uncertainties for future missions. MEDLI pressure data will permit more accurate trajectory reconstruction, as well as separation of aerodynamic and atmospheric uncertainties in the hypersonic and supersonic regimes. This paper provides an overview of the project including the instrumentation design, system architecture, and expected measurement response.

Gazarik, Michael J.↗

THE MOST METAL-POOR STARS. I. DISCOVERY, DATA, AND ATMOSPHERIC PARAMETERS

We report the discovery of 34 stars in the Hamburg/ESO Survey for metal-poor stars and the Sloan Digital Sky Survey that have [Fe/H] {approx}< -3.0. Their median and minimum abundances are [Fe/H] = -3.1 and -4.1, respectively, while 10 stars have [Fe/H] < -3.5. High-resolution, high signal-to-noise spectroscopic data-equivalent widths and radial velocities-are presented for these stars, together with an additional four objects previously reported or currently being investigated elsewhere. We have determined the atmospheric parameters, effective temperature (T {sub eff}), and surface gravity (log g), which are critical in the determination of the chemical abundances and the evolutionary status of these stars. Three techniques were used to derive these parameters. Spectrophotometric fits to model atmosphere fluxes were used to derive T {sub eff}, log g, and an estimate of E(B - V); H{alpha}, H{beta}, and H{gamma} profile fitting to model atmosphere results provided the second determination of T {sub eff} and log g; and finally, we used an empirical T {sub eff}-calibrated H{delta} index, for the third, independent T {sub eff} determination. The three values of T {sub eff} are in good agreement, although the profile fitting may yield systematically cooler T {sub eff} values, by {approx}100 K. This collective data set will be analyzed in future papers in the present series to utilize the most metal-poor stars as probes of conditions in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Models for the atmospheres of Jupiter and Saturn

Numerical models of the atmospheres of Jupiter and Saturn have been created for use in the development of design criteria for space vehicles intended to investigate these plants. These models provide a basis for the assessment of entry heating, the transmission and emission of radiation, and structural and aerodynamic interactions. The model atmospheres are based on data and analyses published in the literature through 1970. The composition is duscussed, and the relative amounts of each molecular species are tabulated for nominal and extreme cases. The structure of the atmospheric regions is discussed, and the principal features of one nominal and two limiting models for each planet are indicated. The models are illustrated by pressure-temperature profiles which also display the major cloud layers.

Divine, N.↗