Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aperture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field

© 2017 IEEE. Advances in the performance of low- and high-temperature superconductors enable the development of advanced magnets for a range of applications, including tokamaks for fusion energy, dipoles, and quadrupoles for hadron colliders, and solenoids for nuclear magnetic resonance studies. The capability of testing prototype cables and insert coils at high field is critical to these developments. We present here the conceptual design of a test facility dipole with features suitable to support the advanced magnet development efforts of both Fusion and HEP communities. In particular, a background field of 15 T is provided over a minimum homogeneous length of 1000 mm, and the magnet clear bore of approximately 144 × 94 mm can accommodate large fusion conductors as well as prototype coils for high field dipoles, along with flexible cryogenic and mechanical provisions for sample characterization. Two technical solutions are considered. The first uses a forced flow cable-in-conduit conductor and follows the design developed by EFDA for the EDIPO magnet. The second uses a bath cooled Rutherford cable and follows a block-coil design similar to the CERN FRESCA2 dipole, and the LBNL HD and LD1 dipoles. Following a comparison between the two approaches, we present two designs for the Rutherford cable approach including performance objectives, key parameters, and preliminary magnetic, mechanical and quench protection analysis.

Bruzzone, Pierluigi↗

Magnetic and Mechanical Analysis of a Large Aperture 15 T Cable Test Facility Dipole Magnet

The US Department of Energy (DOE) Office of Science (SC), is funding a large bore “Cable Test Facility Magnet” for testing advanced cables and inserts in high transverse field. This is a joint effort between the Office of High Energy Physics (HEP) and the Office of Fusion Energy Sciences (FES). The background field magnet for this facility is being developed at Lawrence Berkeley National Laboratory (LBNL) while the cryostat and test facility will be located and operated by Fermi National Accelerator Laboratory (FNAL). The Nb 3 Sn dipole magnet, which will provide the transverse background field, is designed to generate a field of 15 T in a 100 × 150 mm bore at 1.9 K. The conceptual design of a block-type dipole with flared ends and a structure based on key-and-bladder technology will be introduced. The results of the magnetic and mechanical analysis will be presented.

43 PARTICLE ACCELERATORS↗

The B1APF Large Aperture Interaction Region Dipole

Brookhaven National Laboratory is hosting the Electron Ion Collider (EIC). B1APF dipole is the last magnet near the interaction point #6. The longitudinal geometrical space available for this magnet is 1.5 m. The diameter of the coil mandrel is 370 mm. The 3-dimensional coil ends design is particularly challenging because of this large aspect ratio. The coil operating current and operating temperature are 12600 A and 1.9 K respectively. It produces an integrated dipole field of 4.05 Tm. The coil is wound with a NbTi Rutherford cable which is 15.1 mm wide and 1.8 mm thick. The parameters for the 3D end design optimization are obtained after a series of winding tests on a real mandrel with the given cable. In conclusion, this study discusses the latest design based on 1) sensitivity studies on variations in wedge thicknesses and variations in B-H data, and 2) experimental data from the winding trials, analysis and its implementation in the 3D design of this magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design, Fabrication, and Characterization of Near-Field Apertures for 1 Tbit/in$^{2}$ Areal Density

Today, conventional magnetic recording schemes are coming to an end because of the superparamagnetic limit. Heat-assisted magnetic recording (HAMR) may ultimately extend data densities beyond 1 TB/in. HAMR systems utilize the phenomenon during which the magnetic properties of the recording media could be locally modified via heating (optionally, by an optical source in the near field) to temperature in the vicinity of the Curie value of the media material. As a result, heat induced by the optical source can temporarily reduce the magnetic coercivity of high anisotropy material to a level attainable by the magnetic writing head, thus making it feasible to record on relatively small ultra-high anisotropy (and thermally stable) grains, consequently enhancing the areal density dramatically. The key challenge is to develop a near-field transducer capable of delivering over 50 nWinto a spot diameter of 30 nm. Traditional fiber schemes are barely capable of 0.1 nW. To resolve the issue, a laser diode could be placed with the emitting edge only a few nanometers away from the recording media. The light can propagate through a nanoaperture on the surface of an aluminum-coated emitting edge. This paper will present an experimental study of recording characteristics of various near-field transducers fabricated via focused ion beam (FIB). To count the number of photons emitted in the near field, a scanning near-field optical microscopy system has been implemented. The experiments indicate that the FIB-fabricated transducers could deliver power of over a few microwatt into a 30-nm spot

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impact of fused silica debris shields and enhanced mitigation techniques on large-aperture beam-sampling optics for the National Ignition Facility

Here, we show that the large-scale routine use of the fused silica debris shield (FSDS) maintains the ∼100× reduction in damage initiation rate and 70% increase in the install lifetime of a new grating debris shield (GDS) observed during pilot operations. Furthermore, we show that the install lifetimes of recycled GDS optics are nearly tripled using additional mitigation strategies such as expanding mitigation processing to include all damage sites larger than 10 μm (LT10) rather than just larger than 50 μm (LT50) and FSDS. We note that there is still a 50% difference between new and recycled optic installation lifetimes. We show that recycled optics have a 3.5× higher apparent initiation rate than new optics when exposed to nominally identical laser conditions.

FSDS↗