Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Saturation curve of SiO{sub 2} component in rutile-type GeO{sub 2}: A recoverable high-temperature pressure standard from 3 GPa to 10 GPa

The accuracy and precision of pressure measurements and the pursuit of reliable and readily available pressure scales at simultaneous high temperatures and pressures are still topics in development in high pressure research despite many years of work. In situ pressure scales based on x-ray diffraction are widely used but require x-ray access, which is lacking outside of x-ray beam lines. Other methods such as fixed points require several experiments to bracket a pressure calibration point. In this study, a recoverable high-temperature pressure gauge for pressures ranging from 3 GPa to 10 GPa is presented. The gauge is based on the pressure-dependent solubility of an SiO{sub 2} component in the rutile-structured phase of GeO{sub 2} (argutite), and is valid when the argutite solid solution coexists with coesite. The solid solution varies strongly in composition, mainly in pressure but also somewhat in temperature, and the compositional variations are easily detected by x-ray diffraction of the recovered products because of significant changes in the lattice parameters. The solid solution is measured here on two isotherms, one at 1200 °C and the other at 1500 °C, and is developed as a pressure gauge by calibrating it against three fixed points for each temperature and against the lattice parameter of MgO measured in situ at a total of three additional points. A somewhat detailed thermodynamic analysis is then presented that allows the pressure gauge to be used at other temperatures. This provides a way to accurately and reproducibly evaluate the pressure in high pressure experiments and applications in this pressure-temperature range, and could potentially be used as a benchmark to compare various other pressure scales under high temperature conditions. - Graphical abstract: The saturation curve of SiO{sub 2} in TiO{sub 2} shows a strong pressure dependence and a strong dependence of unit cell volume on composition. This provides an opportunity to use this saturation curve as a measurement of pressure during a high-pressure experiment. The curve is a sensitive measure of pressure from 3 GPa to 10 GPa at high temperatures. The pressure is derived from lattice parameter measurements on the recovered solid solution, meaning that in-situ measurements are not necessary to evaluate the pressure of the experiment. - Highlights: • The unit cell of a saturated GeO{sub 2}–SiO{sub 2} solid solution is used as a pressure sensor. • We measure nine bracketed pressure points on the GeO{sub 2}–SiO{sub 2} saturation surface. • We provide a pressure calibrant from 3 GPa to 10 GPa at two temperatures. • Four points are measured at 1200 °C and five points at 1500 °C. • A thermodynamic model is developed for use of the calibrant at other temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymorphism and second harmonic generation in a novel diamond-like semiconductor: Li{sub 2}MnSnS{sub 4}

High-temperature, solid-state synthesis in the Li{sub 2}MnSnS{sub 4} system led to the discovery of two new polymorphic compounds that were analyzed using single crystal X-ray diffraction. The α-polymorph crystallizes in Pna2{sub 1} with the lithium cobalt (II) silicate, Li{sub 2}CoSiO{sub 4}, structure type, where Z=4, R1=0.0349 and wR2=0.0514 for all data. The β-polymorph possesses the wurtz-kesterite structure type, crystallizing in Pn with Z=2, R1=0.0423, and wR2=0.0901 for all data. Rietveld refinement of synchrotron X-ray powder diffraction was utilized to quantify the phase fractions of the polymorphs in the reaction products. The α/β-Li{sub 2}MnSnS{sub 4} mixture exhibits an absorption edge of ∼2.6–3.0 eV, a wide region of optical transparency in the mid- to far-IR, and moderate SHG activity over the fundamental range of 1.1–2.1 μm. Calculations using density functional theory indicate that the ground state energies and electronic structures for α- and β-Li{sub 2}MnSnS{sub 4}, as well as the hypothetical polymorph, γ-Li{sub 2}MnSnS{sub 4} with the wurtz-stannite structure type, are highly similar. - Graphical abstract: Two polymorphs, α- and β-Li{sub 2}MnSnS{sub 4}, have been discovered using single crystal X-ray diffraction. Rietveld refinement of synchrotron X-ray powder diffraction data indicates the presence of both polymorphs in the samples that were analyzed. - Highlights: • Li{sub 2}MnSnS{sub 4} exists as two polymorphs crystallizing in the Pna2{sub 1} and Pn space groups. • The α- and β-Li{sub 2}MnSnS{sub 4} mixture exhibits a moderate SHG response over a broad range. • The α- and β-Li{sub 2}MnSnS{sub 4} mixture exhibits an optical absorption edge of ∼2.6–3.0 eV. • Synchrotron powder diffraction data are necessary to distinguish α- and β-Li{sub 2}MnSnS{sub 4.} • Electronic structure calculations show similar total energies for α- and β-Li{sub 2}MnSnS{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zinc(II) and Cadmium(II) coordination polymers constructed from phenylenediacetate ligands

ABSTRACT: A series of new coordination polymers {[Zn(μ-opda)(μ-bpa)]·2H_2O}{sub n} (1), [Zn(μ{sub 3}-ppda)(μ-bpa)]{sub n} (2), [Cd(μ{sub 3}-ppda)(μ-bpa)]{sub n} (3), [Cd(μ{sub 3}-mpda)(μ-bpa)]{sub n} (4) and [Cd(μ{sub 3}-mpda)(μ-bipy)]{sub n} (5), (o/m/ppda=1,2/1,3/1,4-phenylenediacetate, bpa=1,2-bi(4-pyridyl)ethane, bipy=4,4′-bipyridine) were synthesized. Their structures were characterized by elemental analysis, IR spectroscopy, single-crystal and powder X-ray diffraction. Furthermore, the effect of metal sources (zinc acetate and zinc oxide) and acidity of the solution on the structure of the coordination polymers was discussed for complexes 1 and 5, respectively. The single-crystal X-ray crystallographic studies revealed that complexes 1, 3, 4 and 5 are uninodal (4)-connected 2D frameworks and display sql topology with the point symbol of (4{sup 4}.6{sup 2}). Complex 2 is 3D coordination polymer and exhibits pcu topology with the point symbol of (4{sup 12}.6{sup 3}). In addition, the luminescent properties and thermal behavior of all complexes were also investigated. - Graphical abstract: Scheme 1. Topologies of Coordination Polymers Reported in This Paper.

36 MATERIALS SCIENCE↗

Generation of H{sub 2} and CO by solar thermochemical splitting of H{sub 2}O and CO{sub 2} by employing metal oxides

Generation of H{sub 2} and CO by splitting H{sub 2}O and CO{sub 2} respectively constitutes an important aspect of the present-day concerns with energy and environment. The solar thermochemical route making use of metal oxides is a viable means of accomplishing these reduction reactions. The method essentially involves reducing a metal oxide by heating and passing H{sub 2}O or CO{sub 2} over the nonstoichiometric oxide to cause reverse oxidation by abstracting oxygen from H{sub 2}O or CO{sub 2}. While ceria, perovskites and other oxides have been investigated for this purpose, recent studies have demonstrated the superior performance of perovskites of the type Ln{sub 1−x}A{sub x}Mn{sub 1−y}M{sub y}O{sub 3} (Ln=rare earth, A=alkaline earth, M=various +2 and +3 metal ions), in the thermochemical generation of H{sub 2} and CO. We present the important results obtained hitherto to point out how the alkaine earth and the Ln ions, specially the radius of the latter, determine the performance of the perovskites. The encouraging results obtained are exemplefied by Y{sub 0.5}Sr{sub 0.5}MnO{sub 3} which releases 483 µmol/g of O{sub 2} at 1673 K and produces 757 µmol/g of CO from CO{sub 2} at 1173 K. The production of H{sub 2} from H{sub 2}O is also quite appreciable. Modification of the B site ion of the perovskite also affects the performance. In addition to perovskites, we present the generation of H{sub 2} based on the Mn{sub 3}O{sub 4}/NaMnO{sub 2} cycle briefly. - Graphical abstract: Ln{sub 0.5}A{sub 0.5}Mn{sub 1−x}M{sub x}O{sub 3} (Ln=lanthanide; A=Ca, Sr; M=Al, Ga, Sc, Mg, Cr, Fe, Co) perovskites are employed for the two step thermochemical splitting of CO{sub 2} and H{sub 2}O for the generation of CO and H{sub 2}. - Highlights: • Perovskite oxides based on Mn are ideal for the two-step thermochemical splitting of CO{sub 2} and H{sub 2}O. • In Ln{sub 1−x}A{sub x}MnO{sub 3} perovskite (Ln=rare earth, A=alkaline earth) both Ln and A ions play major roles in the thermochemical process. • H{sub 2}O splitting is also achieved by the use of the Mn{sub 3}O{sub 4}-sodium carbonate system. • Thermochemical splitting of CO{sub 2} and H{sub 2}O using perovskite oxides is explained. • Mn based perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile approach towards increasing the nitrogen-content in nitrogen-doped carbon nanotubes via halogenated catalysts

Nitrogen-doped carbon nanotubes (N-CNTs) have been synthesized at 850 °C via a CVD deposition technique by use of three ferrocenyl derivative catalysts, i.e. para-CN, -CF{sub 3} and -Cl substituted-phenyl rings. The synthesized catalysts have been characterized by NMR, IR, HR-MS and XRD. The XRD analysis of the para-CF{sub 3} catalyst indicates that steric factors influence the X-ray structure of 1,1′-ferrocenylphenyldiacrylonitriles. Acetonitrile or pyridine was used as carbon and nitrogen sources to yield mixtures of N-CNTs and carbon spheres (CS). The N-CNTs obtained from the para-CF{sub 3} catalysts, in pyridine, have the highest nitrogen-doping level, show a helical morphology and are less thermally stable compared with those synthesized by use of the para-CN and -Cl as catalyst. This suggests that fluorine heteroatoms enhance nitrogen-doping in N-CNTs and formation of helical-N-CNTs (H-N-CNTs). The para-CF{sub 3} and para-Cl catalysts in acetonitrile yielded iron-filled N-CNTs, indicating that halogens promote encapsulation of iron into the cavity of N-CNT. The use of acetonitrile, as carbon and nitrogen source, with the para-CN and -Cl as catalysts also yielded a mixture of N-CNTs and carbon nanofibres (CNFs), with less abundance of CNFs in the products obtained using para-Cl catalysts. However, para-CF{sub 3} catalyst in acetonitrile gave N-CNTs as the only shaped carbon nanomaterials. - Graphical abstract: Graphical abstract showing the synthesis of N-CNTs using halogenated-ferrocenyl derivatives as catalyst with pyridine or acetonitrile as nitrogen and carbon sources via the chemical vapour deposition technique. - Highlights: • N-CNTs were synthesized from halogenated ferrocenyl catalysts. • Halogenated catalysts promote nitrogen-doping and pyridinic nitrogen in N-CNTs. • Halogenated catalysts facilitate iron filling of N-CNTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure synthesis and relationship between A-site ordering and local structure of multicomponent perovskites (Ln{sub 0.25}Mn{sub 0.75})(Al{sub 0.25}Ti{sub 0.75})O{sub 3}, Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Y

ABSTRACT: The synthesis of multicomponent perovskites (Ln{sub 0.25}Mn{sub 0.75})(Al{sub 0.25}Ti{sub 0.75})O{sub 3} (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Y) have been investigated using a high-pressure and high-temperature (6 GPa, 1175 °C) technique. When Ln{sup 3+} is larger La{sup 3+}, Pr{sup 3+}, Nd{sup 3+}, the A-site ordered perovskites, LnMn{sub 3}(Al{sub 0.25}Ti{sub 0.75}){sub 4}O{sub 12} in Im-3, have been successfully synthesized. The A-site partially disordered one, (Sm{sub 0.80}Mn{sub 0.20})(Sm{sub 0.07}Mn{sub 0.93}){sub 3}(Al{sub 0.25}Ti{sub 0.75}){sub 4}O{sub 12} is also obtained. In the case of smaller Gd{sup 3+}, Tb{sup 3+}, Dy{sup 3+}, we have obtained no single phase but two decomposed perovskite phases. When Ln{sup 3+} is much smaller Y{sup 3+}, it is crystallized as an A-site disorder one in Pnma. The Rietveld structural refinements of the A-site ordered and partially disordered perovskites indicate that the tilting of (Al/Ti)O{sub 6} octahedrons for the A-site ions ordering is correlated with the (Al/Ti)–O and Ln–O bond lengths to optimize the coordination of the A- and A′-sites. The phase stability of the A-site ordered perovskites is discussed from the viewpoint of this correlation. - Graphical abstract: Ln{sup 3+} (VIII) ionic radius dependence of BO{sub 6} octahedron tilt angle and A/B–O distance of Im-3 perovskites (Ln{sub 0.25}Mn{sub 0.75})(Al{sub 0.25}Ti{sub 0.75})O{sub 3} (Ln=La-Sm).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable photoluminescence of CsPbBr{sub 3} perovskite quantum dots for light emitting diodes application

All-inorganic cesium lead halide (CsPbBr{sub 3}) perovskite quantum dots (QDs), as one kind of promising materials, have attracted considerable attention in optoelectronic applications. Herein, we synthesized the colloidal CsPbBr{sub 3} QDs with tunable photoluminescence (PL) (493–531 nm) by adjusting the reaction temperatures, which revealed narrow emission bandwidths of about 25 nm. The average diameters of the QDs could be adjusted from 7.1 to 12.3 nm as the temperature increased from 100 °C to 180 °C. Moreover, the radiative lifetimes of CsPbBr{sub 3} QDs were measured to be ~ 2 ns, and the single QD fluorescence intensity time trace results demonstrated its suppressed blinking emission. Moreover, green light emitting diodes by using CsPbBr{sub 3} QDs casted on blue LED chips were further fabricated, which provided potential applications in the field of display and lighting technology. - Graphical abstract: The graphical abstract shows photoluminescence spectra of CsPbBr{sub 3} quantum dots and one typical light emitting diodes device (inset: schematic diagram and optical image). Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The homometallic warwickite V{sub 2}OBO{sub 3}

Highlights: • New mixed valent vanadium borate. • Multiple phase transitions on cooling. • High resolution synchrotron powder X-ray diffraction data. - Abstract: The synthesis, structure and elementary magnetic characterization of the homometallic warwickite V{sub 2}OBO{sub 3} are reported. The material adopts the orthorhombic warwickite structure type at room temperature, space group Pnma (No. 62) with lattice parameters a = 9.2317(1) Å, b = 3.1172(1) Å, and c = 9.5313(1) Å. Temperature-dependent magnetic susceptibility, electrical resistivity, and specific heat measurements show anomalies near 35 K, between 135 K and 150 K, and near 260 K, with the transition at ~ 35 K likely to a ferrimagnetic state. High resolution synchrotron powder X-ray diffraction data at temperatures between 295 K and 90 K display significant peak splitting upon cooling, indicating that at least one crystallographic symmetry change occurs at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synchrotron X-ray diffraction study of zirconium hydride distribution in Zr-2.5%Nb and its redistribution during thermal cycling

Highlights: • Differently oriented grains were studied in situ using synchrotron diffraction. • The effect of thermo-mechanical history on hydrogen location in α-Zr is considered. • Hydrogen redistribution in alpha-Zr matrix during thermal cycling discussed. - Abstract: Hydride distribution in a dual-phase hydrided Zr-2.5wt%Nb has been studied. Samples having different prior thermo-mechanical processing history were thermally cycled within a 86 keV X-ray photon beam. The diffraction patterns generated with this technique allow the evaluation of the relative quantity of hydrides within differently oriented grain sets. It was found that hydrides exist primarily within two different α-Zr grain-sets. One grain-set has its {0002} α-Zr direction oriented very close to the hoop direction while the other exists within a plane approximately 20° away from it. During thermal cycling, the proportion or hydrides oriented within different grain sets was shown to change from the distribution associated with the prior thermomechanical processing, to that corresponding to the current thermal cycling conditions. It was also shown that the ability for hydrogen to redistribute in the matrix correlates with the cooling rate of the specimen.

36 MATERIALS SCIENCE↗

Neutron scattering measurement of water content and chemical composition of alkali-glass powder reacted gel

Highlights: • Water absorption ability of alkali-glass powder reacted gel was largely reduced comparing other reported alkali-silica gels. • Both SAXS and SANS results showed similar internal structures of samples prepared with different H2O:D2O mixing ratios. • Neutron scattering method was developed to non-destructively determine gel water content and mass density of reacted gels. • Neutron scattering methods (based on scattering length density) on gel water content was validated with TGA measurement. - Abstract: Recent studies demonstrated that the added glass powder with high-alumina content could significantly reduce Alkali-Silica Reaction (ASR) damage in cement concrete. This paper aims to investigate the gel water content, chemical composition and expansion behavior of the alkali-glass powder reacted gel by using neutron scattering and other characterization techniques. Three types of samples were prepared with glass powder, sodium oxide and deuteroxide/hydrogen water with different molar ratios. The swelling potential of this alkali-glass powder reacted gel was much lower than that of the reported alkali-silica reacted gel. The gel water content and chemical compositions were characterized with small-angle neutron scattering (SANS) technique, supported by small-angle X-ray scattering (SAXS), prompt-gamma ray neutron activation analysis (PGAA) measurement. The SAXS test results showed the close scattering intensities, and thus similar internal microstructures among these samples. The elemental molar ratios of gels were obtained from the PGAA test results. Then the gel water molar ratio and mass density were determined by neutron scattering contrast calculation. The determined gel water content from neutron scattering analysis was validated with zero contrast analysis and TGA experimental measurement. Overall, this paper demonstrated the feasibility of using SANS technique to determine the water content of alkali-glass powder reacted gel.

36 MATERIALS SCIENCE↗

Three-dimensional grain mapping of open-cell metallic foam by integrating synthetic data with experimental data from high-energy X-ray diffraction microscopy

Highlights: • High-energy X-ray measurements are made for ligaments of an open-cell aluminum foam. • Grain centroids and orientations are measured using high-energy X-ray diffraction. • 3D grain map is virtually reconstructed by integrating measured and synthetic data. - Abstract: The complex mechanical response of open-cell foams depends strongly on the hierarchy of length scales inherent in them, from engineering-part scale to the ligament scale through the grain scale down to the crystal-lattice scale. A first step toward understanding and predicting the coordinated mechanical response across length scales requires characterizing the open-cell foam structure in three dimensions at relevant scales. Here, we present an initial attempt to digitally represent a physically-realized aluminum alloy foam in terms of both its geometry/topology as well as its underlying crystallographic orientations by integrating several advanced techniques. Specifically, we use a combination of X-ray computed tomography and X-ray diffraction microscopy in conjunction with synthetic grain mapping. Experimental investigation of the foam shows relatively large grain sizes with respect to the ligament length scale, implying that competing mechanics at different length scales (i.e. grain scale vs. ligament scale) will need to be fully incorporated to understand the mechanical behavior of the foam. The integration of non-destructive measurement techniques with synthetic-data generation provides a path toward realistic modeling of bulk samples of open-cell metal foam resolved at the scale of individual grains.

36 MATERIALS SCIENCE↗

Preparation of highly ordered growth of single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures

Graphical abstract: Fabrication of highly ordered single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures over a porous anodized aluminum oxide (AAO) template via hydrothermal method is described. Well aligned non-collapsed Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures are ideal functional components for next generation luminescent devices. Research highlights: {yields} Synthesis of highly ordered Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanotubes, nanorods and nanoflowers. {yields} Using template-assisted (AAO) hydrothermal method. {yields} Well aligned nanostructures for next generation luminescent devices. {yields} Detailed structural, morphology and the phase composition were studied. -- Abstract: A simple and facile template-assisted hydrothermal route has been demonstrated for the shape-selective preparation of highly ordered single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures, such as nanotubes, nanorods and nanoflowers. These fabricated nanostructures possess desirable atomic structures, surfaces, morphologies and properties to meet the growing demands and specific requirements of new technologies. The concentration of precursor chemicals, the temperature, the reaction time, and the use of a capping agent are key factors in the morphological control of Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures. The morphology and the phase composition of the prepared nanostructures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy disperse spectroscopy (EDS) and photoluminescence (PL). We believe this technique will be readily adopted in realizing other forms of various nanostructured materials.

36 MATERIALS SCIENCE↗

Formation of {gamma}-alumina nanorods in presence of alanine

Graphical abstract: Nanorod aluminas with a possible hexagonal symmetry, high surface area and relatively narrow pore size distribution were obtained. Research highlights: {yields} Research highlights {yields} Boehmite was prepared using a green sol-gel process in the presence of alanine. {yields} Nanorod aluminas with a high surface area were obtained. {yields} Addition of alanine would shape the size of the holes and crevices. {yields} The morphologies of the nanorods were revealed by transmission electron microscope. -- Abstract: Boehmite and alumina nanostructures were prepared using a simple green sol-gel process in the presence of alanine in water medium at room temperature. The uncalcined (dried at 200 {sup o}C) and the calcined materials (at 500, 600 and 700 {sup o}C for 4 h) were characterized using XRD, TEM, SEM, N{sub 2} physisorption and TGA. Nanorod aluminas with a possible hexagonal symmetry, high surface area and relatively narrow pore size distribution were obtained. The surface area was enhanced and crystallization was retarded as the alanine content increased. The morphologies of the nanoparticles and nanorods were revealed by a transmission electron microscope (TEM).

36 MATERIALS SCIENCE↗

Influence of the precipitation pH on the compositions and properties of Bi-based oxyiodide photocatalysts

Graphical abstract: A series of Bi-based oxyiodide photocatalysts with different compositions were synthesized via a precipitation-filtration process followed by hydrothermal treatment. The effects of the precipitation pH values on the compositions and photocatalytic activities of the bismuth oxyiodides were investigated. Research highlights: {yields} BiOI, Bi{sub 4}O{sub 5}I{sub 2}, Bi{sub 7}O{sub 9}I{sub 3} and Bi{sub 5}O{sub 7}I were obtained via a precipitation-filtration process followed by hydrothermal treatment. {yields} The compositions of the bismuth oxyiodides could be controlled by adjusting the precipitation pH values. {yields} All the bismuth oxyiodides exhibit photocatalytic activity on decomposing methyl orange. -- Abstract: A series of Bi-based oxyiodide photocatalysts with different compositions were synthesized via a precipitation-filtration process followed by hydrothermal treatment. The compositions of the bismuth oxyiodides could be controlled by adjusting the precipitation pH values. The effects of the precipitation pH values on the compositions and photocatalytic activities of the bismuth oxyiodides were investigated and the relationship between structure and photocatalytic property is discussed. All the as-prepared powders exhibit photocatalytic activity on decomposing methyl orange under visible light irradiation. The activity increases with increasing content of iodine in the bismuth oxyiodides.

36 MATERIALS SCIENCE↗

Magnetic properties of nano-clusters lanthanum chromite powders doped with samarium and strontium ions synthesized via a novel combustion method

Graphical abstract: Nanocrystalline Sm{sup 3+} and Sr{sup 2+} doped LaCrO{sub 3} powders have been synthesized through a novel gel combustion synthesis using triethanol amine (TEA). The saturation magnetization of the LaCrO{sub 3} increased with an increase Sm{sup 3+} ion and it decreased with an increase in the Sr{sup 3+} ion to 0.3 at temperature 1000 {sup o}C for 2 h due to the formation of a monodispersed uniform octahedral structure as shown in the Fig. Research highlights: {yields} Single-phase orthorhombic lanthanum chromite LaCrO{sub 3} nanoclusters have been successfully synthesized through a novel gel combustion synthesis using triethanol amine (TEA). {yields} Sr{sup 2+} ions doped LaCrO{sub 3} increased the unit cell volume and the crystallite size whereas Sm{sup 3+} ions doped LaCrO{sub 3} decreased the unit cell volume and the crystallite size. {yields} The saturation magnetization of the LaCrO{sub 3} powders increased continuously with an increase in the Sm concentration and it decreased with an increase in the Sr ion up to 0.3 at annealing temperature of 1000 {sup o}C for 2 h. -- Abstract: A novel approach to synthesize a single-phase orthorhombic perovskite lanthanum chromite LaCrO{sub 3} clusters doped with Sm{sup 3+} and Sr{sup 2+} ions via gel combustion route was reported. The producing materials were synthesized using metal nitrates as oxidizers and triethanol amine (TEA), N-butyl amine (NBA) or ethylene diamine (EDA) as a fuel. The effect of the annealing temperature, type of organic fuel and the variation of the samarium and/or strontium substitution and its impact on crystal structure, crystallite size, microstructure and magnetic properties of the LaCrO{sub 3} powders formed was systematically studied. The results revealed that a well crystalline single phase of pure LaCrO{sub 3} can be achieved at annealing temperature from 800 to 1000 {sup o}C for 2 h. Moreover, each organic carrier materials exhibited a different degree of effectiveness in the synthesis of the mixed oxide powders. The crystal structure was influenced by doped Sm{sup 3+} and/or Sr{sup 2+} ions. The crystallite size of the produced powders was increased with the increase the annealing temperature, increasing the Sm{sup 3+} ion and the decrease of Sr{sup 2+} ion substitution. The microstructures of the produced powders were found to be nanoclusters octahedra-like shaped. The saturation magnetization of the LaCrO{sub 3} powders increased continuously with an increase in the Sm{sup 3+} ion concentration and it decreased with an increase in the Sr{sup 2+} ion up to 0.3 at annealing temperature of 1000 {sup o}C for 2 h. The maximum saturation magnetization (0.279 emu/g) was achieved at the Sm{sup 3+} ion molar ratio 0.3 and annealing temperature 1000 {sup o}C. Moreover, wide coercivities can be obtained at different synthesis conditions (49.25 to 522 Oe).

36 MATERIALS SCIENCE↗