Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of glass forming additives on low-activity waste feed conversion to glass

A significant effort was invested in the past to develop and refine mathematical models that relate the composition of nuclear waste glasses with their properties, such as viscosity, electrical conductivity, or chemical durability. However, less attention has been paid to the formulation of the melter feed itself, such as the chemical form and the particle size of the glass forming and modifying additives (GFMA), which have a significant effect on the feed-to-glass conversion process during melting. To address this issue, we systematically changed the mineral composition of a simulated low-activity waste melter feed and inspected its melting behavior. When substituting minerals with corresponding oxides and hydroxides, we found that different alumina sources (kyanite, gibbsite, boehmite, or corundum) had the strongest effect on the feed melting process, whereas the sources of Ca, Mg, and Zr had little effect. Further, the x-ray diffraction analysis showed that the alumina sources differ in their dissolution kinetics: early dissolving alumina sources, such as gibbsite (Al(OH) 3 ) and boehmite (AlO(OH)), increase the transient glass-forming melt viscosity at early stages, when gases still evolve, causing extended foaming, whereas alumina sources that dissolve at high temperatures, such as kyanite (Al 2 SiO 5 ) and corundum (Al 2 O 3 ), keep the transient glass-forming melt viscosity low and lead to a faster foam collapse. Using viscosity-composition relationship to estimate the viscosity of transient glass-forming melts in the primary foaming range, we found that the primary foam began to collapse at 360 to 800 Pa s, and fully collapsed between 65 and 260 Pa s. This result agrees with our previous studies, according to which the glass-forming melt viscosity at the cold cap foam bottom ranged from 24 to 85 Pa s.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Development of multi-scale computational frameworks to solve fusion materials science challenges

Over the past two decades, the US-DOE has funded multiple projects that rely on high-performance computing and exascale computing platforms to accelerate scientific discoveries and address grand scientific challenges, such as harnessing fusion energy. In this article, we review in detail one of these efforts aimed at enhancing our capability to model plasma-facing materials subject to plasma and high-energy ion/neutron irradiation. The plasma surface interactions project has built a multi-scale modeling framework where many of the plasma- and high-energy ion/neutron irradiation-induced effects occurring in tungsten are explored. Here, this knowledge is used to develop atomistically-informed, high-fidelity continuum and meso-scale models that can be validated against experiments. We review the developments within this project, with attention to experimental validation efforts, and specifically highlight activities associated with: helium bubble bursting and equation of state, and hydrogen-helium interactions in tungsten; atomistically-informed model development for beryllium-tungsten material mixing; coupling of scrape-of-layer plasma, sheath and material models; and coupling of stochastic cluster-dynamics and crystal plasticity models to address radiation effects in tungsten under stress. Finally, we present how the project is preparing for future computational architectures, for instance through efforts to adapt atomistic methods to exascale computing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Statistical fracture behavior of doped UO 2 using a ball-on-ring equibiaxial flexure test method

Metal oxide dopants, such as titanium and chromium oxides, have garnered considerable attention for their potential to increase grain size (≥ 30 µm) in UO 2 fuel, purportedly enhancing fission gas retention during reactor operation. Fuel performance is significantly impacted by fuel fracture behavior, so it is important to understand the effects of enhanced grain size and dopant content on UO 2 fuel fracture. UO 2 pellets were doped with 0.1 wt% TiO 2 and 0.3 wt% Cr 2 O 3 to alter density and grain size. Inductively coupled plasma mass spectroscopy measured dopant levels pre- and post-sintering. X-ray diffraction revealed lattice changes and microstrain via Rietveld refinement. Field emission scanning electron microscopy determined grain sizes of approximately 30 µm for TiO 2 doping and 7 µm for Cr 2 O 3 doping. Transverse rupture strength tests were performed on over 30 samples per dataset to obtain characteristic strength and Weibull modulus. Results indicate no statistical difference in fracture strength between 0.1 wt% TiO 2 doped UO 2 and undoped UO 2 , while 0.3 wt% Cr 2 O 3 doped UO 2 exhibited a 20% decrease in fracture strength. Doped UO 2 samples also showed reduced Weibull modulus compared to undoped UO 2 , suggesting increased scatter in fracture strength. This study's findings suggest that titanium and chromium oxide doping in UO 2 , regardless of grain size, induce residual stresses, decreasing fracture strength and increasing variability in fracture behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Development of the technological process for the IGR reactor's highly-enriched irradiated uranium-graphite fuel immobilization

The immobilization of irradiated highly enriched uranium (HEU) fuel is a critical component of nuclear waste management and non-proliferation efforts. In Kazakhstan, at National Nuclear Center of the Republic of Kazakhstan special attention is given to managing legacy HEU fuel from research reactors. One such case involves the IGR research reactor, whose first core containing irradiated HEU uranium-graphite fuel was operated from 1961 to 1966 and removed following reactor modernization. This fuel now requires a reliable and secure immobilization strategy. Here, this paper presents the development of a technological process for immobilizing this fuel to reduce its enrichment to below 20 % in terms of 235U content. The proposed method involves down-blending irradiated HEU fuel with depleted uranium, followed by encapsulation in a Portland cement matrix. Full-scale experiments were conducted to assess the uniformity of uranium distribution within the matrix. The results confirm the effectiveness of this approach, ensuring reliable immobilization of fuel in accordance with international requirements, including IAEA standards and Kazakhstan's regulatory framework. These findings contribute to the broader effort of adapting immobilization strategies for the safe management of spent fuel from research reactors.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2024

Monotonic testing of single shear-plane CLT-to-CLT joint with hardwood dowels

Reducing embodied carbon emissions in buildings and striving for carbon neutrality through sustainable design has become a primary goal in the construction industry. The industry is expanding its use of wood-engineered products, such as cross-laminated timber (CLT) to achieve those sustainability goals. Furthermore, replacing steel fasteners with lower embodied carbon alternatives is gaining increased attention in timber engineering. This paper aims to quantify the mechanical behavior of single shear-plane CLT-to-CLT joints using hardwood dowels. The study includes 154 single shear-plane experimental tests with four different CLT species, two hardwood dowel species, and two dowel diameters. Further, the test specimens were subjected to cyclic and monotonic loading until failure, and mechanical properties such as yielding and ultimate strength, serviceability and yielding stiffness, and ductility were quantified. The hardwood dowel CLT-to-CLT joints demonstrated high strength with up to 10.3 kN (2.3 kips) capacity per dowel and lateral stiffness of up to 5.2 kN/mm (30.8 k/in) per dowel. This strength and stiffness are roughly equivalent to or exceed values for mass timber wood screws, making hardwood dowels a good alternative. In addition, the observed mean ductility of joints ranged from 2.4 to 4.5. Finally, analytical equations for the joints' yielding strength, lateral serviceability stiffness, and yielding stiffness were derived with non-linear regression analysis and validated using the experimental test results.

42 ENGINEERING↗
DOE OSTI2026

Uncertainty quantification for Joule heating processes in fibrous pore-resolved media

Joule heating (JH) is an energy-efficient and sustainable technique for heating materials. Its application for industrial heating, particularly, has been gaining attention due to its potential for increasing the yield of various chemical products. The process involves the use of heating elements (materials that are highly conductive electrically and thermally) to heat up other materials or substances. These conductors, however, can exhbit varying degrees of uncertainty due to non-linearities in their temperature-dependent properties, which could result in variable material behavior. In this work, we carry out uncertainty quantification (UQ) at the pore scale to describe the uncertainty of such materials. In so doing, we applied the non-intrusive polynomial chaos expansion (PCE) technique to quantify the uncertainty within the system. The steady state Joule heating equation was solved numerically at the pore scale mimicking conditions within a heating chamber for propane dehydrogenation, and various electro-thermal profiles were obtained. We also examined the effect of the number of sampling points (20 – 100) and order of the PCE coefficients (2 – 5) on the accuracy of the temperature evaluations. The results were then benchmarked with the standard Monte Carlo (MC) method. The average temperature of the 4th-order global PCE showed good agreement with the MC results (which were positively skewed). Orders greater than 4 gave an underestimation of the temperatures while predictions for the peak temperature improved as the number of sampling points increased.

Fagbemi, Samuel [ORNL] (ORCID:0000000236995025)↗
DOE OSTI2020

Global Techno-Economic Performance of Bifacial and Tracking Photovoltaic Systems

Although most of the current photovoltaic (PV) system installations use monofacial modules with fixed-tilt mounting structures, bifacial modules, trackers, and the combination of them are also getting more attention as potential candidates to further reduce the PV levelized cost of electricity (LCOE). This work is then the first to present a worldwide analysis on the yield potential and cost-effectiveness of PV farms composed of monofacial fixed-tilt and single/dual (1T/2T) tracker installations, as well as their bifacial counterparts. Our approach starts by estimating the irradiance reaching the front and rear surface of the modules for the different system designs (validated based on data from real PV systems and results from the literature) to estimate their energy production (row-row shading is neglected). Subsequently, the overall system cost during their 25-year lifetime is factored in, and LCOE is obtained. The results reveal that bifacial-1T installations increase energy yield by 35% and reach the lowest LCOE for the majority of the world (93.1% of the land area). Although dual axis trackers achieve the highest energy generation — especially for bifacial modules — their cost is still too high, and are therefore not as cost-effective. Sensitivity analyses based on the Monte Carlo and region sensitivity approach are performed to analyze the impact of input assumptions on the calculated LCOE. These reveal that our conclusions are robust in general but exact configuration to choose depends on specific site conditions. This investigation is not only of interest to the scientific community, but also can be used as a guide for PV installation companies and investors to determine the most suitable technology for a particular location.

14 SOLAR ENERGY↗
DOE OSTI2022

Can CO 2 -assisted alkane dehydrogenation lead to negative CO 2 emissions?

The utilization of light alkanes to generate value-added chemicals has gained significant attention due to the U.S. shale gas boom in recent decades. For example, after methane, ethane (3-16 vol.%) and propane (up to 5 vol.%) are the most abundant hydrocarbon species in shale gas deposits. Further, these inexpensive, widely available, but often underutilized, light alkanes can be used as a feedstock to produce olefins, which are among the most important petrochemical building blocks in chemical industry. Ethylene and propylene are used in the production of polymers (e.g., polyethylene, polypropylene) and epoxides (e.g., ethylene oxide, propylene oxide), as well as intermediates in the manufacture of numerous other chemicals (e.g., ethylene glycol, ethylbenzene, acetone, isopropanol, acrylonitrile).

03 NATURAL GAS↗
DOE OSTI2022

Decoupling mass transport and electron transfer by a double-cathode structure of a Li-O 2 battery with high cyclic stability

Aprotic lithium-oxygen (Li-O 2 ) batteries have attracted extensive attention due to their ultrahigh theoretical energy density. However, slow and undesired electron transfer during cathodic reactions causes low cyclic stability in these batteries. Here, in this paper, we demonstrate that O 2 mass transport and electron transfer for cathodic reactions in Li-O 2 batteries could be decoupled by a double-cathode structure that efficiently enables stable electron transfer between the cathode and Li 2 O 2 /O 2 . This resolves various side reactions and slow Li 2 O 2 reaction kinetics issues in conventional Li-O 2 batteries, leading to stable operation of the cell for nearly 2 months at a capacity of 0.2 and 5 mAh cm -2 , with more than 4- and 10-fold increases in cycle life when compared with single-cathode batteries. These remarkable improvements in the cyclic stability of Li-O 2 batteries with double cathodes provide an interesting concept for improving the operational stability of other metal-rechargeable batteries with conversion-type chemistry.

25 ENERGY STORAGE↗
DOE OSTI2023

The phantom menace of dynamic soft-shorts in solid-state battery research

Solid-state batteries with lithium metal anodes present the highest energy density batteries for applications in electric vehicles, leading to massive R&D investments over the past decade. Although most research focuses on preventing lithium metal dendrites that eventually short the battery, the nature of these shorts remains elusive. Soft-shorts, in particular, receive little attention or are not recognized, even in published data. Here, in this study, we present a comprehensive outline of the detection and analysis of soft -shorts in solid-state lithium metal cells with composite polymer electrolytes as well as a fundamental understanding of the dynamics of soft -shorts. Transient un-shorting of soft -shorts that occurs on the micro-to-millisecond timescale-driven by joule heating, chemical reactivity, and other processes-limits one's ability to determine whether the cell was or is still shorted. We provide numerous experimental methods to detect and analyze soft-shorts in any battery type as a resource to all battery researchers.

25 ENERGY STORAGE↗
DOE OSTI2024

Toward sustainable electrochemically mediated separations driven by renewable energy

Environmental pollution, water scarcity, resource shortage, and fossil fuel reliance have all represented threats to a sustainable future. Separation processes play a pivotal role in improving sustainability in fields such as industrial processes, resource recycling, wastewater treatment, and water desalination, among others. Electrochemical systems have gained increased attention as effective separation platforms, not only in performance but also as a potentially energy-efficient approach. However, the reliance on non-renewable energy sources, such as fossil fuels, for electricity generation limits the advancement toward a fully sustainable separation process. Integration of separation processes with eco-friendly renewable energy sources can increase overall sustainability and decrease carbon footprint. Here, in this review, we provide an overview of electrochemical separations and recent efforts to integrate them with renewable energy sources such as heat and solar energy. We discuss electrochemical separations, including electrosorption and electrodialysis, and research to transition these processes to thermoelectrochemical (TEC) and photoelectrochemical (PEC) platforms. Finally, we discuss current challenges and future prospects in direct integration of renewable energy sources with separation processes.

electrochemistry↗
DOE OSTI2020

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Potential of porous nodal-line semi-metallic carbon for sodium-ion battery anode

As an alternative to lithium-ion batteries (LIBs), sodium-ion batteries (SIBs) have attracted much attention because sodium is abundant, cost-effective, and environmentally benign. However, due to the larger size of Na-ion compared to the Li-ion, graphite does not work well as an anode for SIBs, as it does for LIBs. In this work, based on first-principles calculations, we show that the recently proposed topological semi-metallic carbon, HZGM-42, has great potential as an anode material for SIBs. With a large capacity of 318.5 mAhg -1 , low diffusion barrier of 0.08–0.21 eV, low average open-circuit voltage of 0.43 V, and a small volume expansion of 1.85%, the all-carbon topological quantum HZGM-42 has high energy density, good rate capability, and excellent cycling stability and can serve as a universal anode material for both LIBs and SIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Electric vehicle post-crash Recovery—Stranded energy issues and mitigation strategy

In post-crash situations, passengers, bystanders, and first responders are exposed to the immediate safety risks of stranded energy in electric vehicle (EV) batteries. Stranded energy is the energy remaining inside any undamaged or damaged battery following an accident. A potentially damaged battery with an unknown state of safety might go into thermal runaway in the absence of proper monitoring, diagnostics, controls, and handling—thereby leading to potential loss of life and property damage. Therefore, it is imperative to develop standard guidelines, diagnostic methods, and tools to handle stranded energy appropriately and minimize safety risks from immediately after an EV accident to final disposal or re-entry to the road. This perspective paper identifies the challenges associated with handling stranded energy and proposes some potential solution pathways. Further, we hope to draw attention of the research and development community, original equipment manufacturers, and policymakers for motivating new insights and research needs in mitigating safety implications associated with stranded energy.

25 ENERGY STORAGE↗
DOE OSTI2022

Effect of porous transport layer properties on the anode electrode in anion exchange membrane electrolyzers

Anion exchange membrane water electrolyzers (AEMELs) have recently received significant attention due to their potential advantages over existing commercial water electrolysis technologies. However, AEM electrolyzers have not yet met performance and durability targets. One of the critical components in achieving high AEMEL performance is the porous transport layer (PTL) which serves many critical functions in the oxygen evolution reaction (OER) electrode. In this study, several OER PTL attributes were investigated, including: material of construction, fabrication method, feature size, porosity/density, and thickness. It was found that higher porosity helped facilitate multiphase (O 2 , H 2 O, etc.) transport; however, as the porosity increased, the catalyst layer adhesion to the PTL decreased, the contact resistance with the bipolar plate increased and the cell operating voltage increased. It was found that nickel-based PTLs allowed for lower operating voltages than similarly-structured stainless steel PTLs. Improved operating voltages were achieved with both fiber felts and sintered structures by porosity optimization. Furthermore, an increase in thickness did not affect transient voltage response, however, it had a negative effect on performance stability. As a result, the experimental findings presented here provide important insights for development of PTL materials and structures for efficient and low-cost water electrolysis.

08 HYDROGEN↗
DOE OSTI2023

Degradation and recovery of solid oxide fuel cell performance by control of cathode surface acidity: Case study – Impact of Cr followed by Ca infiltration

Solid oxide fuel cells (SOFC) have attracted attention as clean and efficient energy conversion devices with low emissions. However, several degradation mechanisms limit the electrochemical performance of current SOFCs, with cathode degradation due to Cr-poisoning from metal interconnects particularly problematic. The acidity/basicity of binary additives has been found to be a sensitive descriptor of the oxygen exchange kinetics, indicating that acidic Cr-species/basic Ca-species can be expected to deactivate/activate the cathode surface, respectively. Inspired by recent advances, the feasibility of relative acidity as a tool for reviving degraded SOFCs is demonstrated by neutralizing Cr-poisoned SOFCs by subsequent serial infiltration of Ca-species. Furthermore, a model mixed ionic and electronic conducting oxide, Pr 0.1 Ce 0.9 O 2-δ (PCO), is selected as the cathode material. Area-specific resistances (ASR) of symmetric cells obtained by electrochemical impedance spectroscopy show that Cr-infiltration results in a seven-fold increase in ASR, while subsequent infiltration of Ca-species leads to complete recovery. Performance degradation and recovery are attributed to depressed/enhanced redox properties at the PCO surface, as supported by XPS analysis. Experiments using anode-supported fuel cells show a reduction in peak power density by 26% upon Cr-infiltration, reversed following Ca-infiltration, after which no degradation is observed during subsequent operation for 100 h.

(Pr,Ce)O2-δ↗
DOE OSTI2023

Unlocking the value of recycling scrap from Li-ion battery manufacturing: Challenges and outlook

The growing global trend toward mobile electrification is primarily driven by the rising popularity of electric vehicles, leading to an unprecedented surge in demand for lithium-ion batteries. As a result, the importance of battery recycling has become increasingly apparent. Battery recycling aims to recover valuable materials from both spent batteries and battery manufacturing scraps. By recycling these resources, the reliance on raw material extraction is reduced, which benefits resource conservation and minimizes the need for new mining operations. While significant attention has been given to the recycling of spent batteries, less emphasis has been placed on the recycling and recovery of battery scraps. However, it is important to recognize that many gigafactories are still taking steps to improve their manufacturing processes, and end-of-life batteries take approximately 10 years to become suitable for recycling, the manufacturing scraps will serve as the primary sources for recycling in this decade. This review delves into the progress in recycling technologies associated with battery manufacturing scraps, shedding light on the challenges, opportunities, and evolving perspectives surrounding battery manufacturing scrap recycling. In conclusion, we aim to contribute to the knowledge base of battery manufacturing scrap recycling and promote a more comprehensive understanding of the subject.

25 ENERGY STORAGE↗
DOE OSTI2024

Recycled graphite enabled superior performance for lithium ion batteries

Recycling graphite attracts growing attention since cumulative amount of spent Li-ion batteries and the shortage of graphite supply chain. Although various recycling methods have been reported, the recycled graphite cannot reach the strict commercial standards of purity, scalability, efficiency, and capacity, preventing it from battery manufacturing. Herein, the important roles of defects and functional groups on the graphite surface are deeply studied, and a closed-loop graphite recycling process with the surface recovery and modification for the graphite from the end-of-life batteries is demonstrated. The recovered graphite delivers a purity of over 99.9 % and an average initial coulombic efficiency of 91.5 %. Compared with commercial graphite in industrial standard battery testing parameters, full cells with recovered graphite possess enhanced rate reversibility, doubled cycle life, over 10 % higher capacity along with half anode material cost. In conclusion, these impressive results not only underscore the transformative potential of surface reconstruction and modification in graphite recycling, but also present economic feasibility and sustainable pathway for significantly improving battery performance and addressing global resource challenges via integration with the hydrometallurgical recycling process.

25 ENERGY STORAGE↗