Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “work functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Soil Water Retention and Hydraulic Conductivity Data and Model at Snodgrass Mountain in East River Watershed, Colorado 2020-2025

This data package includes soil water retention and hydraulic conductivity data and model fitting results from measurements of ex-situ soil samples and in-situ soil sensors at Snodgrass Mountain. Soil water retention curves (SWRC) characterize soil water content as a function of soil water potential. SWRC depends on soil texture and pore structure and can be used to describe the constraints on biogeochemical processes in terms of soil water availability. In this data package, the sample identification follows the format SG-X-Y, where SG refers to Snodgrass Mountain, X is the location identifier, and Y is the depth identifier at the same X (shallow Y=1). Specifically, SG-EHS is associated with ecohydrology sites under the East-Taylor Watershed Community Observatory Sites directory, and SG-ERTn (upslope n=1) are points along the Snodgrass electrical resistivity tomography transect not associated with the existing site names in the directory. The sample and location information can be found in metadata.csv. Sampling and Measurements Each sample falls into one of the three sampling methods – (1) intact cores, (2) repacked samples, or (3) soil sensors – and one of the two measurement methods – (a) laboratory or (b) in-situ. Both intact cores and repacked samples were measured using the laboratory methods, which include measurements of soil water potential (HYPROP & WP4C, METER), saturated (KSAT, METER) and unsaturated hydraulic conductivity (HYPROP). The in-situ method uses a pair of co-located soil sensors to measure volumetric water content (TEROS12, METER) and soil water potential (TEROS21, METER), and the hydraulic conductivity was not measured. In comparison, the laboratory methods progress from full saturation to dry conditions, and the in-situ method includes both dry-to-wet and wet-to-dry cycles. The sampling and measurement methods for each sample can be found in metadata.csv, and more information about the measurements is detailed in the Methods section below. Models Retention and hydraulic conductivity data were fitted with four van-Genuchten-type models (specified by “model_name” column in the files): (1) traditional constrained van Genuchten model (“vG_constrained”), (2) traditional unconstrained van Genuchten model (“vG_unconstrained”), (3) PDI-variant of the constrained van Genuchten model (“vG_constrained_PDI”), and (4) PDI-variant of the unconstrained van Genuchten model (“vG_unconstrained_PDI”). The difference between the constrained (1: n) and the unconstrained (2: n, m) van Genuchten models is the number of pore-size distribution parameters in the model equations, giving the unconstrained model more degrees of freedom when fitting the data. Between the traditional and the PDI-variant models, model fitting differs the most at the dry end of the measurements. The traditional models allow infinite suction at the residual water content (water content does not drop below residual water content), and the PDI-variant models enforce a soil water potential value of pF=6.8 (~ -630 MPa) at oven-dryness (water content reaches 0). The inclusion of the van-Genuchten-type models is due to their common application. If other retention models are required, users can access the data in data.csv for further data fitting. More information about the models can be found in the Methods section below. Fitting Tasks The model fitting can be categorized into three levels of tasks (specified by “fitting_task” column in the files). Level 1 (“fit_retention”) only includes retention data fitting (the only level available for the in-situ method). Level 2 (“fit_retention_conductivity”) includes both retention and hydraulic conductivity data fitting, and the saturated hydraulic conductivity (Ks, a parameter of the hydraulic conductivity functions) is fixed by the measurements from KSAT. Level 3 (“fit_retention_conductivity_Ks”) also includes both retention and hydraulic conductivity data fitting, but Ks is a fitted parameter without the constraints from KSAT measurements. Among the same retention models (e.g. vG_constrained models of the same sample), level 1 should produce the best retention data fitting. Level 2 should have the highest misfit of the retention and hydraulic conductivity data, because the retention and hydraulic conductivity functions share common model parameters, and the unsaturated hydraulic conductivity (HYPROP) data fitting is subject to Ks measured independently by KSAT. Level 3 should have mid-level misfits of the retention and hydraulic conductivity data. While level 3 fits the hydraulic conductivity data better than level 2, the fitted Ks value might be unreasonable due to the lack of constraints at the wet end of the measurements. General recommendation when using this data package: (1) Choice of sampling methods: Intact cores and in-situ soil sensors could be prioritized because these sampling methods are less destructive. While the repacked samples were packed to the target bulk density (estimated post-sampling, when sample volume was known), these samples had altered pore structures. Nevertheless, intact cores might suffer from sample gaps that would lead to overestimation of Ks (sample gaps can be inferred from the “soil_sample_volume” column in metadata.csv when the value is < 249). In-situ method also has higher uncertainty in characterizing the wet end of the SWRC because of sensor limitations and the difficulty in reaching full saturation under natural conditions. (2) Choice of fitting tasks: When only retention data is needed, level 1 (“fit_retention”) should be prioritized. When both retention and hydraulic conductivity data are needed, level 2 (“fit_retention_conductivity”) could be prioritized. (3) Choice of models: This could depend on what the downstream models call for. If no specific model is required, model misfit could be used as a ranking criterion. Model misfit values in terms of RMSE can be found in model_parameters.csv. The following files are included in this data package: (1) metadata.csv – This file includes the general information of each sample, including location (description, geocoordinates, elevation), sampling and measurements details (method, depth, time or period, volume, instruments), and soil physical properties (bulk density, saturated hydraulic conductivity, only applicable to physical soil samples). (2) data.csv – This file includes soil water potential, volumetric water content, and unsaturated hydraulic conductivity data of each sample. Column “instrument” specifies the instrument (HYPROP, WP4C, or TEROS) used to perform the measurements. (3) model_fit.csv – This file includes soil water potential, volumetric water content, and unsaturated hydraulic conductivity fitted from the four models and three fitting tasks. Column “model_name” specifies the retention model used, and “fitting_task” specifies the level of data fitting. Missing values indicate that the variable does not apply to that fitting task. (4) model_parameters.csv – This file includes the fitted model parameters, model misfits, and conventional water content thresholds (field capacity and wilting point) from the four models and three fitting tasks. Column “model_name” specifies the retention model used, and “fitting_task” specifies the level of data fitting. Missing values indicate that the parameter does not apply to that model and/or that fitting task. (5) data_Ks.csv – This file includes the saturated hydraulic conductivity measurements from KSAT. (6) /figure/*.png – This folder includes three quick visualizations of the data, retention model fitting results and misfits, and hydraulic conductivity model fitting results, misfits, and parameters. The model fitting results are separated by samples and fitting tasks and colored by models. Zoom-in required. (7) /hyprop/*.bdhx – This folder includes proprietary hyprop files that require the free Labros SoilView-Analysis (METER) to open. Users can explore data fitting using other retention models (i.e. Brooks-Corey, Fredlund-Xing, Kosugi, bimodal models). Be aware that Ks value is pre-entered under “Fitting tab, Conductivity functions parameters” for level 2 fitting. If the value is lost, please refer to metadata.csv under “Ks” column. (8) Six file-level metadata that summarize file, header, column, and variable information of all files. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

EARTH SCIENCE > LAND SURFACE > SOILS↗
NASA NTRS1991

Lunar rovers and local positioning system

Telerobotic rovers equipped with adequate actuators and sensors are clearly necessary for extraterrestrial construction. They will be employed as substitutes for humans, to perform jobs like surveying, sensing, signaling, manipulating, and the handling of small materials. Important design criteria for these rovers include versatility and robustness. They must be easily programmed and reprogrammed to perform a wide variety of different functions, and they must be robust so that construction work will not be jeopardized by parts failures. The key qualities and functions necessary for these rovers to achieve the required versatility and robustness are modularity, redundancy, and coordination. Three robotic rovers are being built by CSC as a test bed to implement the concepts of modularity and coordination. The specific goal of the design and construction of these robots is to demonstrate the software modularity and multirobot control algorithms required for the physical manipulation of constructible elements. Each rover consists of a transporter platform, bus manager, simple manipulator, and positioning receivers. These robots will be controlled from a central control console via a radio-frequency local area network (LAN). To date, one prototype transporter platform frame was built with batteries, motors, a prototype single-motor controller, and two prototype internal LAN boards. Software modules were developed in C language for monitor functions, i/o, and parallel port usage in each computer board. Also completed are the fabrication of half of the required number of computer boards, the procurement of 19.2 Kbaud RF modems for inter-robot communications, and the simulation of processing requirements for positioning receivers. In addition to the robotic platform, the fabrication of a local positioning system based on infrared signals is nearly completed. This positioning system will make the rovers into a moving reference system capable of performing site surveys. In addition, a four degree mechanical manipulator especially suited for coordinated teleoperation was conceptually designed and is currently being analyzed. This manipulator will be integrated into the rovers as their end effector. Twenty internal LAN cards fabricated by a commercial firm are being used, a prototype manipulator and a range finder for a positioning system were built, a prototype two-motor controller was designed, and one of the robots is performing its first telerobotic motion. In addition, the robots' internal LAN's were coordinated and tested, hardware design upgrades based on fabrication and fit experience were completed, and the positioning system is running. The rover system is able to perform simple tasks such as sensing and signaling; coordination systems which allow construction tasks to begin were established, and soon coordinated teams of robots in the laboratory will be able to manipulate common objects.

Avery, James↗
NASA NTRS2017

Cryogenic Thermal Emittance Measurements on Small-Diameter Stainless Steel Tubing

The Mid Infrared Instrument aboard the James Webb Space Telescoep includes a mechanical cryocooler which cools its detectors to their 6 K operating temperature. The refrigerant flows through several meters of approximately 2 mm diameter 304L stainless steel tubing, with some sections gold plated, and some not, which are exposed to their environment. An issue of water freezing onto the tube surfaces is mitigated by a running a warm gas through the lines to sublimate the water. To model the effect of this process on nearby instruments, an accurate measure of the tube emittance is needed. Previously we reported the abosprtance of the gold plated stainless steel tubing as a function of source temperature (i.e. its environment). In this work the thermal emittance of the uncoated tubing is measured as a function of its temperature between 100 and 300 K. This value leads to an accurate prediction of the minimum length of time required to thermally recycle the system. We report the technique and present the results.

cryogenic↗
NASA NTRS2017

Cryogenic Thermal Emittance Measurements on Small-Diameter Stainless Steel Tubing

The Mid Infrared Instrument aboard the James Webb Space Telescope includes a mechanical cryocooler which cools its detectors to their 6 K operating temperature. The refrigerant flows through several meters of 2 mm diameter 304L stainless steel tubing, with some sections gold plated, and some not, which are exposed to their environment. An issue of water freezing onto the tube surfaces is mitigated by running a warm gas through the lines to sublimate the frozen water. To model the effect of this process on nearby instruments, an accurate measure of the tube emittance is needed. Previously we reported the absorptance of the gold plated stainless steel tubing as a function of source temperature (i.e. its environment). In this work the thermal emittance of the uncoated tubing is measured as a function of its temperature between 100 and 280 K. These values lead to an accurate prediction of the minimum length of time required to thermally recycle the system. We report the technique and present the results.

stainless steel↗
NASA NTRS2001

Impact of Functionally Graded Cylinders: Theory

This final report summarizes the work funded under the Grant NAG3-2411 during the 04/05/2000-04/04/2001 period. The objective of this one-year project was to generalize the theoretical framework of the two-dimensional higher-order theory for the analysis of cylindrical functionally graded materials/structural components employed in advanced aircraft engines developed under past NASA Glenn funding. The completed generalization significantly broadens the theory's range of applicability through the incorporation of dynamic impact loading capability into its framework. Thus, it makes possible the assessment of the effect of damage due to fuel impurities, or the presence of submicron-level debris, on the life of functionally graded structural components. Applications involving advanced turbine blades and structural components for the reusable-launch vehicle (RLV) currently under development will benefit from the completed work. The theory's predictive capability is demonstrated through a numerical simulation of a one-dimensional wave propagation set up by an impulse load in a layered half-plane. Full benefit of the completed generalization of the higher-order theory described in this report will be realized upon the development of a related computer code.

Aboudi, Jacob↗
NASA NTRS1988

PI-in-a-box: Intelligent onboard assistance for spaceborne experiments in vestibular physiology

In construction is a knowledge-based system that will aid astronauts in the performance of vestibular experiments in two ways: it will provide real-time monitoring and control of signals and it will optimize the quality of the data obtained, by helping the mission specialists and payload specialists make decisions that are normally the province of a principal investigator, hence the name PI-in-a-box. An important and desirable side-effect of this tool will be to make the astronauts more productive and better integrated members of the scientific team. The vestibular experiments are planned by Prof. Larry Young of MIT, whose team has already performed similar experiments in Spacelab missions SL-1 and D-1, and has experiments planned for SLS-1 and SLS-2. The knowledge-based system development work, performed in collaboration with MIT, Stanford University, and the NASA-Ames Research Center, addresses six major related functions: (1) signal quality monitoring; (2) fault diagnosis; (3) signal analysis; (4) interesting-case detection; (5) experiment replanning; and (6) integration of all of these functions within a real-time data acquisition environment. Initial prototyping work has been done in functions (1) through (4).

Colombano, Silvano↗
DOE OSTI2020

Coupled Cluster Green's function formulations based on the effective Hamiltonians

In this work, we demonstrate that the effective Hamiltonians obtained with the downfolding procedure based on double unitary coupled cluster (DUCC) ansatz can be used in the context of Green’s function coupled cluster (GFCC) formalism to calculate spectral functions of molecular systems. This combined approach (DUCC-GFCC) provides a significant reduction of numerical effort and good agreement with the corresponding all-orbital GFCC methods in energy windows that are consistent with the choice of active space. These features are demonstrated on the example of two benchmark systems: H 2 O and N 2 , where DUCC-GFCC calculations were performed for active spaces of various sizes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Metagenome-assembled genomes from topsoils along a hillslope water gradient across early snowmelt to late summer in East River, CO

Drought is changing the American Mountain West at unprecedented rates with unknown consequences to soil microbiome composition and function. As a part of LBNL Watershed Science Focus Area (SFA), we investigated shifts in microbial community and transcriptional activity on a subalpine conifer-meadow transition zone throughout the summer of 2023 as soil dried down. This work took place in Crested Butte, CO on Snodgrass mountain, using a proxy for drought conditions.Here we present metagenome assembled genomes (MAGs) for the bacterial and archaeal community at 0-10cm from three sites along a hillslope water gradient across five timepoints from early snowmelt to late summer. 42 metagenomes were sequenced at Joint Genome Institute (JGI) and can be found under the JGI GOLD (Genomes Online Database) sequencing project Gs0166660. Metagenomes were assembled through an inhouse pipeline (see methods), binned using four autobinners (concoct, maxbin2, metabat2, and vamb) and consolidated using dastool. The consolidated bins from all metagenomes were pooled, filtered by completeness (>70%) and contamination (<10%), and dereplicated at 95% ANI using drep. This dataset (1) a zip file of 157 MAGs (as fasta files, Gs0166660_bins_tar.gz), (2) sample metadata file with sample IGSNs (International Generic Sample Numbers) (samples.csv), (3) bounding box coordinates for the sampled locations (Gs0166660.kml), (4) metagenome assembly and coassembly metadata file listing IMG/M (Integrated Microbial Genomes/Metagenomes) metagenome accessions linking samples to metagenomes (EastRiver_Drought_ESSDive_Metadata.csv), (5) location metadata file (locations.csv), (6) file-level metadata file (flmd.csv) and (7) data dictionary (dd.csv) file.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dissection of Grass Cell Wall Lignin Formation and their Associated Dirigent Protein

This Final Report describes work underway to establish why monocot (e.g. grasses) lignins are more readily (bio)degradable than their woody gymnosperm, angiosperm, and fern counterparts. Our hypothesis is that monocot specific dirigent protein (DP) sub-families are wholly or partly involved in generating these more readily (bio)degradable lignins. Three approaches are underway: metabolomics and lignin analyses of stem and leaf tissues of the grass, Brachypodium; Crispr/Cas9 gene editing of monocot specific DP sub-families in this species, and recombinant protein expression of Brachypodium’s 44 DPs. Metabolomic and lignin analyses were completed for 6 and 8 week old Brachypodium in order to establish the molecular diversity of its largely phenolic metabolites: Crispr/Cas9 gene editing has also been done on specific DPs known to be expressed in lignifying stems, and T 2 generation plant lines are now being generated, prior to establishing the effects on lignin composition and content; in the recombinant DP work (which addresses establishing the biochemical function of the monocot specific DPs and other DPOs as needed), all 44 constructs have been generated (in collaboration with DOE JGI) and are being systematically expressed in either E. coli or yeast (Pichia sp.) for future studies. Future work will be directed towards bringing the current studies to completion, and in establishing the biochemical basis as to how these more readily (bio)degradable lignins are generated/assembled.

(bio)degradability↗
NASA NTRS1987

Io: Comparison of photometric scans produced by the Minnaert and Hapke functions

Experience has shown that the empirical Minnaert function is a very useful approximation to real photometric behavior near opposition (phase angle = 0), but that in general it cannot accurately model photometric scans across the face of even a homogeneous planet at higher phase angles. Given recent work on fitting the rigorous Hapke function to Voyager data for Io, we can test to what degree the Minnaert function breaks down in the case of Ionian materials by comparing photometric scans produced by the two approaches. At phase angles 2, 20, 30, 60, and 90 deg, we have computed scans of the reflectance along the photometric equator and mirror meridian that would be expected for a homogeneous planet whose surface obeys Hapke's law. The values used for the Hapke parameters omega(0), h, g, and bar-theta were derived for Io by Simonelli and Veverka in both the Voyager narrow angle camera violet filter and orange filter. Each calculated Hapke scan is compared with the corresponding scan predicted by Minnaert's law for various values of the Minnaert limb-darkening parameter k. For a Minnaert scan at a particular k, the value of the reflectance parameter B(0) is arbitrarily chosen so that the Minnaert and Hapke scans coincide at the so-called specular point (the point where the photometric equator and mirror meridian intersect). The violet filter photometric scans that result from this process are shown. Results indicate that the empirical Minnaert function, while not a perfect model of real photometric behavior, does provide a very useful parameterization of limb darkening at phase angles out to 90 deg, and is especially useful near opposition.

Simonelli, Damon P.↗
NASA NTRSDate not supplied

Quantifying Post-fire Vegetation Recovery on the Colorado Front Range

Forest composition and structure in the Colorado Front Range has been altered by changing wildfire regimes, particularly in response to increased fire severity. Subsequent reductions in post-fire tree regeneration can result in chronic impacts to ecological function and water quality. This project partnered with the U.S. Forest Service to estimate tree canopy recovery from 15 to 21 years after four Colorado Front Range fires that burned between 1996 and 2002— the Bobcat, Buffalo Creek, Hayman, and High Meadows fires—using Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper (ETM+), and Landsat 8 Operational Land Imager (OLI). First, we evaluated relationships between recovery metrics derived from spectral vegetation indices (i.e. post-fire vegetation, normalized burn ratio, percent unrecovered vegetation) and field-collected counts of post-fire tree seedling regeneration. Then, we used high-resolution imagery paired with Landsat timeseries spectral and geomorphometric data to map forest canopy cover 15-21 years post-fire. Finally, we assessed ecological drivers of recovery including topography, climate, soils, and fire severity using Random Forest. While we found that basic vegetation index metrics failed to distinguish field-measured tree regeneration, our data showed that both aspect and burn severity were important drivers of vegetation recovery. North-facing aspects tended to have higher pre-fire Normalized Difference Vegetation Index (NDVI) and thus higher burn severities. However, areas that burned at high severity experienced slower vegetation recovery, regardless of aspect suggesting that high severity fire can mute favorable site conditions on north-facing aspects (i.e. moister, more developed soils). While this work propels our understanding of variables that influence vegetative recovery, vegetation type, forest conversion, and watershed function, more work should focus on what vegetation indices identifying areas of recovery indicate across different forest types and burn severities.

NASA DEVELOP↗
DOE OSTI2024

Engineered mRNA–ribosome fusions for facile biosynthesis of selenoproteins

Ribosomes are often used in synthetic biology as a tool to produce desired proteins with enhanced properties or entirely new functions. However, repurposing ribosomes for producing designer proteins is challenging due to the limited number of engineering solutions available to alter the natural activity of these enzymes. In this study, we advance ribosome engineering by describing a novel strategy based on functional fusions of ribosomal RNA (rRNA) with messenger RNA (mRNA). Specifically, we create an mRNA–ribosome fusion called RiboU, where the 16S rRNA is covalently attached to selenocysteine insertion sequence (SECIS), a regulatory RNA element found in mRNAs encoding selenoproteins. When SECIS sequences are present in natural mRNAs, they instruct ribosomes to decode UGA codons as selenocysteine (Sec, U) codons instead of interpreting them as stop codons. This enables ribosomes to insert Sec into the growing polypeptide chain at the appropriate site. Our work demonstrates that the SECIS sequence maintains its functionality even when inserted into the ribosome structure. As a result, the engineered ribosomes RiboU interpret UAG codons as Sec codons, allowing easy and site-specific insertion of Sec in a protein of interest with no further modification to the natural machinery of protein synthesis. To validate this approach, we use RiboU ribosomes to produce three functional target selenoproteins in Escherichia coli by site-specifically inserting Sec into the proteins’ active sites. Overall, our work demonstrates the feasibility of creating functional mRNA–rRNA fusions as a strategy for ribosome engineering, providing a novel tool for producing Sec-containing proteins in live bacterial cells.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

Expressing Functionality Using Design Patterns, A Real-World Example

Digital Engineering is a transformative strategy that leverages an integrated model-based approach to improve communication, decision making, design understanding, and acquisition efficiency of system development. As modern systems are derived from pre-existing systems, harvesting tacit knowledge from existing systems in a useful, model-based way will reduce the experiential learning and cognition required for new system development, contributing to a Digital Engineering transformation. This study enables such a technique by demonstrating the use of architectural theory in expressing tacit knowledge from existing systems and presenting that knowledge according to the model-based view offered by the Functional Architecture of Systems methodology. By validating the functional information expressed by the design pattern, this work solidifies design patterns as a critical component of a technical architecture and proposes a functional architecture viewpoint for describing mined knowledge in a usable, model-based, way suitable for archival in a modern knowledge management system.

Systems Engineering↗
DOE OSTI2025

High‐Temperature Single‐Photon Emission From Covalently Functionalized van der Waals Heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as tungsten diselenide (WSe 2 ) are attractive nanomaterials for quantum information applications due to single-photon emission (SPE) from intrinsic atomic defects. Defect and strain engineering techniques have been developed to produce high purity, deterministically placed SPE in WSe 2 . However, a major challenge in the application of these techniques is the low temperature required to observe defect-bound TMD exciton emission, typically limiting SPE to T < 30 K. SPE at higher temperatures either loses purity or requires integration into complex devices such as optical cavities. Here, 2D heterostructure engineering and molecular functionalization are combined to achieve high purity (>90%) SPE in strained WSe 2 persisting to over T = 90 K. Covalent diazonium functionalization of graphite in layered WSe 2 /graphite heterostructures maintains high purity up to T = 90 K and single-photon source integrity up to T = 115 K. This method preserves the best qualities of SPE from WSe 2 while increasing working temperature to more than three times the typical range. This work demonstrates the versatility of surface functionalization and heterostructure design to synergistically improve the properties of quantum emission and offers new insights into the phenomenon of SPE from 2D materials.

2D materials↗
DOE OSTI2024

Nonprecious Single Atom Catalyst for Methane Pyrolysis

The development of a suitable catalytic system for methane pyrolysis reactions requires a detailed investigation of the activation energy of C-H bonds on catalysts, as well as their stability against sintering and coke formation. In this work, both single-metal Ni atoms and small clusters of Ni atoms deposited on titanium nitride (TiN) plasmonic nanoparticles were characterized for the C-H bond activation of a methane pyrolysis reaction using ab initio spin-polarized density functional theory (DFT) calculations. The present work shows the complete reaction pathway, including energy barriers for C-H bond activation and dehydrogenated fragments, during the methane pyrolysis reaction on catalytic systems. Interestingly, the C-H bond activation barriers were low for both Ni single-atom and Ni-clusters, showing the energy barriers of ~1.10 eV and ~0.88 eV, respectively. Additionally, single-atom Ni-TiN showed weaker binding to adsorbates, and a net endothermic reaction pathway indicated that the single-atom Ni-TiN was expected to resist coke formation on its surface. However, these Ni single-atom catalysts can sinter, aggregate into a small cluster, and form a coke layer from the highly exothermic reaction pathway that the cluster takes despite the facile reaction pathway.

08 HYDROGEN↗
DOE OSTI2022

DFT-FE 1.0: A massively parallel hybrid CPU-GPU density functional theory code using finite-element discretization

In this work, we present DFT-FE 1.0, building on DFT-FE 0.6 [Comput. Phys. Commun. 246, 106853 (2020)], to conduct fast and accurate large-scale density functional theory (DFT) calculations (reaching ~ 100,000 electrons) on both many-core CPU and hybrid CPU-GPU computing architectures. This work involves improvements in the real-space formulation—via an improved treatment of the electrostatic interactions that substantially enhances the computational efficiency—as well high-performance computing aspects, including the GPU acceleration of all the key compute kernels in DFT-FE. We demonstrate the accuracy by comparing the ground-state energies, ionic forces and cell stresses on a wide-range of benchmark systems against those obtained from widely used DFT codes. Further, we demonstrate the numerical efficiency of our implementation, which yields ~ 20× CPU-GPU speed-up by using GPU acceleration on hybrid CPU-GPU nodes. Notably, owing to the parallel-scaling of the GPU implementation, we obtain wall-times of 80–140 seconds for full ground-state calculations, with stringent accuracy, on benchmark systems containing ~ 6, 000 – 15,000 electrons.

pseudopotential↗
DOE OSTI2024

Ultrafast Formation of Charge Transfer Trions at Molecular‐Functionalized 2D MoS 2 Interfaces

Abstract In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr‐ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge‐transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr‐ESFG especially sensitive to the trion formation dynamics. The presence of charge‐transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Jing, Yuancheng↗
DOE OSTI2026

Vegetation classification map and covariates associated with NEON AOP survey, East River, CO 2018

This package includes geospatial data layers developed to investigate how environmental gradients—specifically topography and near-surface soil properties—drive the spatial arrangement of dominant plant communities in mountainous watersheds. The geospatial products, which support the analysis of these ecological relationships, are derived from airborne hyperspectral and LiDAR datasets acquired by the National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP), in conjunction with an extensive ground field campaign conducted in summer 2018. This work is part of the DOE Watershed Function Science Focus Area (SFA) and features geospatial datasets developed based on observations and ground data collected at East River, Colorado, in collaboration with the National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) survey in June 2018. Classification Map: - Classification Map (PNG, GeoTIFF): Derived from hyperspectral and LiDAR airborne data using a machine learning approach. - Class Code Mapper (CSV): Associates pixel values with corresponding vegetation/non-vegetation classes. - Classification Reference Data (CSV): Reference data used in the machine learning procedure. LiDAR-Derived Products: - Topographical Metrics (GeoTIFFs): Elevation, slope, curvature, TWI, TPI, solar insolation, and canopy height model (CHM), smoothed with a 5x5 pixel window. Vegetation Indices: - GeoTIFFs of NDVI, NDNI, NDWI: Vegetation indices derived from hyperspectral data. Urban Masks: - Urban Mask (GeoTIFF): Applied to the mapping to convert bare soil classes to urban classes. Software Compatibility: GeoTIFFs: Can be visualized with GIS software or libraries that support GeoTIFF images. CSV Files: Can be opened with any software that handles comma-separated values. The FLMD file provides details and links to the source datasets used to derive the products. The manuscript (in the Method session) provides details on how each product was derived. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Update on 2026-03-25: Since the original dataset publication date of 02/28/2020, this package has a new classification map derived by an improved methodology. This update also includes additional ground data that improved the representation of some of the communities. See the methods for further details on what has changed between versions.

2018 NEON and 2025 CHESS Campaigns↗