Real-time LLW Spectrum Measurement and Its Application to NDE of Composites
Explore the source record for details and available documents.
Real-time Leaky Lamb Wave NDE↗
SEARCH · Engineering Papers
Results for “wave spectrum”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Technology Development Roadmap: A Technology Development Roadmap for a Future Gravitational Wave Mission
Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA-led mission after 2020-both use the same technologies. Further, NASA participation in an ESA-led mission would likely augment the eLISA architecture with a third arm to become the SGO Mid architecture. For these reasons, this TDR for a future GW mission applies to both designs and both programmatic paths forward. It is adaptable to the different timelines and roles for an ESA-led or a NASA-led mission, and it is adaptable to available resources. Based on a mature understanding of the interaction between technology and risk, the authors of this TDR have chosen a set of objectives that are more expansive than is usual. The objectives for this roadmap are: (1) reduce technical and development risks and costs; (2) understand and, where possible, relieve system requirements and consequences; (3) increase technical insight into critical technologies; and (4) validate the design at the subsystem level. The emphasis on these objectives, particularly the latter two, is driven by outstanding programmatic decisions, namely whether a future GW mission is ESA-led or NASA-led, and availability of resources. The relative emphasis is best understood in the context of prioritization.
Laser Interferometry Space Antenna↗
Acoustic‐Modulated, Selective Particle Deposition for Muti‐Material Additive Manufacturing
Powder‐based additive manufacturing (AM) is an important technology in fabricating complex 3D products. In powder‐based AM, a powder deposition system plays a key role in determining the resolution, density, and properties of printed parts. An acoustic‐actuated particle deposition approach, which utilizes acoustic waves to actuate a glass nozzle, enables the deposition of particles in a cost‐effective way. However, the capability to programmably deposit different particles using acoustic waves has yet to be fully demonstrated. Herein, a selective particle deposition approach via acoustic modulation for muti‐material AM is demonstrated. Sequential and parallel depositions of two types of particles by modulating the signal inputs and resonant frequencies of piezo transducers are demonstrated. An AM process is demonstrated by integrating this acoustic‐actuated particle deposition approach with a heat‐curing mechanism. Several products from this system are produced as well. It is expected that this particle deposition approach can be used in a wide spectrum of applications, such as direct manufacturing of multi‐functional materials/devices.
36 MATERIALS SCIENCE↗
Reacceleration of Galactic Cosmic Rays beyond the Knee at the Termination Shock of a Cosmic-Ray-driven Galactic Wind
The origin of cosmic rays (CRs) above the knee in the spectrum is an unsolved problem. We present a wind model in which interstellar gas flows along a nonrotating, expanding flux tube with a changing speed and cross-sectional area. CRs from Galactic sources, such as supernova remnants, which are coupled to the plasma via Alfvén waves, provide the main pressure source for driving this outflow. These CRs are then subject to diffusive shock reacceleration at the Galactic wind termination shock, which is located at a distance ~200 kpc. Some of the highest-energy reaccelerated particles propagate upstream against the wind and can contribute to the petaelectronvolt to exaelectronvolt range of the spectrum. We analyze the conditions under which efficient reacceleration can occur and find that rigidities ~10–40 PV can be obtained and that the termination shock may account for between 10% and 50% of the proton spectrum measured in IceCube/IceTop experiment. In our model, the termination shock is unable to fully explain the CR spectrum in the petaelectronvolt to exaelectronvolt range. The highest-energy particles that escape downstream from our termination shock, and similar shocks surrounding most galaxies, can be further accelerated by intergalactic shock fronts.
79 ASTRONOMY AND ASTROPHYSICS↗
Alpha particle driven Alfvénic instabilities in ITER post-disruption plasmas
Fusion-born alpha particles in ITER disruption simulations are investigated as a possible drive of Alfvénic instabilities. The ability of these waves to expel runaway electron (RE) seed particles is explored in the pursuit of a passive, inherent RE mitigation scenario. The spatiotemporal evolution of the alpha particle distribution during the disruption is calculated using the linearized Fokker–Planck solver CODION coupled to a fluid disruption simulation. These simulations are done in the limit of no alpha particle transport during the thermal quench, which can be seen as a most pessimistic situation where there is also no RE seed transport. Under these assumptions, the radial anisotropy of the resulting alpha population provides free energy to drive Alfvénic modes during the quench phase of the disruption. We use the linear gyrokinetic magnetohydrodynamic code LIGKA to calculate the Alfvén spectrum and find that the equilibrium is capable of sustaining a wide range of modes. The self-consistent evolution of the mode amplitudes and the alpha distribution is calculated utilizing the wave-particle interaction tool HAGIS. Intermediate mode number (n = 7–15, 22–26) toroidal Alfvén eigenmodes are shown to saturate at an amplitude of up to δB/B ≈ 0.1% in the spatial regimes crucial for RE seed formation. We find that the mode amplitudes are predicted to be sufficiently large to permit the possibility of significant radial transport of REs.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOUBLY-STRANGE BARYON SPECTROSCOPY WITH THE GLUEX EXPERIMENT: GROUND STATE ¿(1320) PHOTOPRODUCTION CROSS SECTION AND PROPERTIES
In the light-quark sector, traditional quark models and, more recently, lattice QCD calculations have predicted many more baryon states than have been experimentally observed. The hyperons, baryons with strange-quark content, in particular abundantly lack these observed states, and past observations are statistically limited. For multi-strange hyperons the matter is much worse and the production mechanisms of these states in photoproduction are very poorly understood. By capitalizing on the narrow peaks, as compared to the broad and overlapping N* and ¿* states, characteristic of the lowest lying ¿ resonances, the systematic aspects of the spectrum can be analyzed. In addition, we can measure experimental observables such as the production cross section to study the production mechanisms of the ¿ resonances. By accumulating various experimental observables, this goal could be accomplished through Partial Wave Analysis (PWA). The main body of work presented in this dissertation is the physics analysis and systematic study of the production cross section for the doubly strange octet ground state baryon (¿(1320)) in the exclusive t-channel photoproduction reaction ¿p ¿ K+Y* ¿ K+(K+¿-)Y* where ¿- ¿ ¿p- and ¿ ¿ pp-. The spin quantum number of ¿(1320) is also extracted and discussed. A preliminary result to extract the mass of ¿(1320) is also explored as a result of the statistical limitations of current measurements. Furthermore, the spectrum of the excited ¿* baryons are explored and discussed in the ¿*- ¿ K-¿ decay channel. The studies on the ground state and excited ¿ baryon are performed using the GlueX Phase-I (GlueX-I) data set. We have extracted differential cross sections from seven beam photon energy bins for E¿ ¿ [6.4,11.4] GeV1 and for -t < 2.4 GeV2 in the production of K+Y*. 1Natural units (c = 1) are used for the entire body of work.
Hernandez, Jesse [Florida State Univ., Tallahassee↗
Partial Wave Analysis of Strange Mesons Decaying to K+p+p- in the Reaction ¿p ¿ K+p+p-¿(1520) and the Commissioning of the GlueX DIRC Detector
Hadron spectroscopy is a cornerstone of our understanding of the strong nuclear interactions. Studying the hadron spectrum led to the postulation of quarks and gluons, and the development of Quantum Chromodynamics (QCD), the theory of the strong nuclear force. Today hadron spectroscopy provides an important test of QCD, particularly in the non-perturbative energy regime. One such test is the existence of hybrid hadrons that have gluonic degrees of freedom, e.g. q ?qg states, that are allowed by QCD but have remained elusive in experimental searches. The GlueX experiment located at Thomas Jefferson National Accelerator Facility, is designed to map the light meson spectrum, including hybrid mesons, produced by a linearly polarized photon beam that is scattered off of a liquid hydrogen target. This dissertation concerns the installation and commissioning of the GlueX DIRC upgrade and the analysis of three reactions measured by the GlueX experiment. The GlueX DIRC is a particle identification detector installed as an upgrade to the GlueX experiment in 2019 to improve the experiment?s ability to distinguish pions and kaons. The DIRC uses Cherenkov photons radiated by charged particles that travel faster than the speed of light in the detector medium to determine the velocity of said particles. The velocity measurement is used in conjunction with momentum measurements from other detectors to determine the mass of the particle. The DIRC will be essential to the future of strange meson spectroscopy in GlueX. The reactions ?p ? K+K??+??p, ?p ? K+K??0?0p, ?p ? K+K??0?p were initially chosen for this analysis to search for the hybrid meson candidate ?(2170) and related resonances. The ?(2170) has been observed in e+e? collider experiments decaying to K+K??+?? and K+K??0?0, among other final states. The ?(2170) was not observed in this analysis. The reaction ?p ? K+?+???(1520), a subset of the ?p ? K+K??+??p reaction, was analyzed with a Partial Wave Analysis (PWA) in order to study strange mesons that decay to K+?+??. In the PWA, a useful model for the angular distributions was found but no significant structures could be observed due to statistical limitations.
Hurley, Andrew↗
Broadband noise generated by turbulent inflow to rotor or stator blades in an annular duct
The Green's function relating the radiated pressure field to the fluctuating forces on rotor or stator blades is developed in the presence of dissipation due to turbulent velocity fluctuations and sound speed fluctuations. The resonances in the output power spectrum which would occur at the cut-off frequencies in the absence of dissipation should be removed and smeared out by the incorporation of dissipation. Wave number dependence is developed for an effective eddy viscosity due to the aforementioned fluctuations in the background medium. The space-time correlation function for blade-normal velocity fluctuations on a single or on two different blades is developed in terms of the velocity correlation tensor for the inflow under the assumptions of isotropy and (Taylor) frozen behavior. The correlation function is then simplified under certain approximations and the behavior of the blade-force correlation function is inferred.
Lnae, F.↗
Energetic ions upstream of Jupiter's bow shock
In an analysis of the Jovian ion events, Baker et al. (1984) have found that there appears to be a spectral hardening as the interplanetary magnetic field (IMF) changed orientation from the postnoon to a prenoon connection point. It was also observed that ion events were accompanied by long-period (approximately 10 min) waves whose presence was weakly related to a decrease in the ion anisotropy. The present investigation examines in substantial detail the development of the ion energy spectrum over the full range (approximately 30 keV to approximately 4 MeV). The results of the investigation show that the energy spectra are dominated by heavy ions (presumed to be oxygen and sulfur) at higher (approximately equal to or greater than 300 keV) energies.
Krimigis, S. M.↗
Tunable CW diode-pumped Tm,Ho:YLiF4 laser operating at or near room temperature
A conversion efficiency of 42% and slope efficiency of 60% relative to absorbed pump power are obtained from a continuous wave diode-pumped Tm,Ho:YLiF4 laser at 2 microns with output power of 84 mW at a crystal temperature of 275 K. The emission spectrum is etalon tunable over a range of7 nm (16.3/cm) centered on 2.067 microns with fine tuning capability of the transition frequency with crystal temperature at a measured rate of -0.03/(cm)K. The effective emission cross-section is measured to be 5 x 10(exp -21) cm squared. These and other aspects of the laser performance are disclosed in the context of calculated atmospheric absorption characteristics in this spectral region and potential use in remote sensing applications. Single frequency output and frequency stabilization are achieved using an intracavity etalon in conjunction with an external reference etalon.
Mcguckin, Brendan T.↗
On the Origin of Whistler Mode Radiation in the Plasmasphere
The origin of whistler mode radiation in the plasmasphere is examined from three years of plasma wave observations from the Dynamics Explorer and three years from the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) spacecraft. These data are used to construct plasma wave intensity maps of whistler mode radiation in the plasmasphere. The highest average intensities of the radiation in the wave maps show source locations and/or sites of wave amplification. Each type of emission is classified based on its magnetic latitude and longitude rather than any spectral feature. Equatorial electromagnetic (EM) emissions (approx. 30-330 Hz), plasmaspheric hiss (approx. 330 Hz - 3.3 kHz), chorus (approx. 2 kHz - 6 kHz), and VLF transmitters (approx. 10-50 kHz) are the main types of waves that are clearly delineated in the plasma wave maps. Observations of the equatorial EM emissions show that the most intense region is on or near the magnetic equator in the afternoon sector and that during times of negative B(sub z) (interplanetary magnetic field),the maximum intensity moves from L values of 3 to less than 2. These observations are consistent with the origin of this emission being particle-wave interactions in or near the magnetic equator. Plasmaspheric hiss shows high intensity at high latitudes and low altitudes (L shells from 2 to 4) and in the magnetic equator over L values from 2 to 3 in the early afternoon sector. The longitudinal distribution of the hiss intensity (excluding the enhancement at the equator) is similar to the distribution of lightning: stronger over continents than over the ocean, stronger in the summer than winter, and stronger on the dayside than nightside. These observations strongly support lightning as the dominant source for plasmaspheric hiss, which through particle-wave interactions, maintains the slot region in the radiation belts. The enhancement of hiss at the magnetic equator is consistent with particle-wave interactions. The chorus emissions are most intense on the morning side as previously reported. At frequencies from approx. 10-50 kHz VLF transmitters dominate the spectrum. The maximum intensity of the VLF transmitters is in the late evening or early morning with enhancements all along L shells from 1.8 to 3.
Green, James L.↗
LiteBIRD: An All-Sky Cosmic Microwave Background Probe of Inflation
The LiteBIRD mission will map polarized fluctuations in the cosmic microwave background (CMB) to search for the signature of gravitational waves from inflation, potentially opening a window on the Universe a fraction of a second after the Big Bang. CMB measurements from space give access to the largest angular scales and the full frequency range to constrain Galactic foregrounds, and LiteBIRD has been designed to take best advantage of the unique window of space. LiteBIRD will have a powerful ability to separate Galactic foreground emission from the CMB due to its 15 frequency bands spaced between 40 and 402 GHz and sensitive 100-mK bolometers. LiteBIRD will provide stringent control of systematic errors due to the benign thermal environment at the second Lagrange point, L2, 20-K rapidly rotating half-wave plates on each telescope, and the ability to crosscheck its results by measuring both the reionization and recombination peaks in the B-mode power spectrum. LiteBIRD would be the next step in the series of CMB space missions, COBE, WMAP, and Planck, each of which has given landmark scientific discoveries.
Lee, Adrian T.↗
The CALorimetric Electron Telescope (CALET) on the International Space Station: Results from the First Two Years On Orbit
The CALorimetric Electron Telescope (CALET) is a high-energy astroparticle physics space experiment installed on the International Space Station (ISS), developed and operated by Japan in collaboration with Italy and the United States. The CALET mission goals include the investigation of possible nearby sources of high-energy electrons, of the details of galactic particle acceleration and propagation, and of potential signatures of dark matter. CALET measures the cosmic-ray electron+positron flux up to 20 TeV, gamma-rays up to 10 TeV, and nuclei with Z=1 to 40 up to 1,000 TeV for the more abundant elements during a long-term observation aboard the ISS. Starting science operation in mid-October 2015, CALET performed continuous observation without major interruption with close to 20 million triggered events over 10 GeV per month. Based on the data taken during the rst two-years, we present an overview of CALET observations: 1) Electron+positron energy spectrum, 2) Nuclei analysis, 3) Gamma-ray observation including a characterization of on-orbit performance. Results of the electromagnetic counterpart search for LIGO/Virgo gravitational wave events are discussed as well.
Y Asaoka↗
Measures of complexity and entanglement in many-fermion systems
There is no unique and widely accepted definition of the complexity measure (CM) of a many-fermion wave function in the presence of interactions. The simplest many-fermion wave function is a Slater determinant. In shell-model or configuration interaction (CI) and other related methods, the state is represented as a superposition of a large number of Slater determinants, which in the case of CI calculations reaches about 20 billion terms [Johnson, arXiv:1809.07869]. Although in practice this number has been used as a CM for decades, it is ill defined: it is not unique, and it depends on the particular type and the number of single-particle wave functions used to construct the Slater determinants. Further, the canonical wave functions and/or natural orbitals [Löwdin, Adv. Phys. 5, 1 (1956); Löwdin and Shull, Phys. Rev. 101, 1730 (1956); Bardeen et al., Phys. Rev. 108, 1175 (1957); N. N. Bogoljubov, Il Nuovo Cimento 7, 794 (1958); Valatin, Il Nuovo Cimento 7, 843 (1958); de Gennes, Superconductivity of Metals and Alloys (CRC Press, Boca Raton, FL, 1999); Ring and Schuck, The Nuclear Many-Body Problem, 1st ed. (Springer-Verlag, Berlin, 2004)] and their corresponding occupation probabilities are intrinsic properties of any many-body wave function, irrespective of the representation, and they provide a unique solution to characterize the CM. The non-negative orbital entanglement entropy, which vanishes for a Slater determinant, provides the simplest CM, while a more complete measure of complexity is the entanglement spectrum. We illustrate these aspects in the case of a complex nonequilibrium time-dependent process, induced nuclear fission described within a real-time density functional theory framework extended to superfluid systems, which can describe simultaneously the long-range and the short-range correlations between fermions. The orbital entanglement entropy of the fissioning nucleus illustrates the localization mechanism of the many-body wave function in Fock and/or Hilbert space. The (minimal) number of Slater determinants required to represent such a complex many-body wave function with a well-defined number of particles in the case presented here is about 10 500 . The realistic case of the highly nonequilibrium nuclear fission process illustrated here is equivalent to a system of 23.328×10 9 interacting quantum spin-1/2 particles, a very large system for the study of quantum entanglement.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Plasma wave turbulence at the magnetopause - Observations from ISEE 1 and 2
An investigation of plasma wave electric and magnetic fields in the vicinity of the magnetopause using measurements from the ISEE 1 and 2 spacecraft is presented. Strong electric and magnetic field turbulence is often observed at the magnetopause; the electric field spectrum of this turbulence extends from less than a few hertz to over 100 kHz, and the magnetic field from a few hertz to about 1 kHz. Similar turbulence spectra are observed in association with flux transfer events and possible 'inclusions' of boundary layer plasma in the magnetosphere. Two possible plasma instabilities, the electrostatic ion-cyclotron and the lower-hybrid-drift instability, should explain the broad-band electric field turbulence; the narrow-band electrostatic emissions near the local electron plasma frequency are believed to be plasma oscillations or electrostatic waves near the upper-hybrid-resonance frequency.
Gurnett, D. A.↗
Spectral transition of multiscale turbulence in the tokamak pedestal
The transition in the turbulence spectrum from ion-scale dominated regimes to multiscale transport regimes that couple ion and electron scales is studied with gyrokinetic simulations of turbulent transport. The simulations are based on DIII-D high-confinement mode (H-mode) plasma parameters in the tokamak pedestal. The transition is initiated by varying the ion temperature gradient. To our knowledge, no full multiscale simulations of pedestal-like transport have been done previously. The experimental parameters lie in a bifurcation region between the two regimes. At long wavelengths, a complex, ion-direction hybrid mode is the dominant linearly unstable drift wave, while an electron temperature gradient-driven mode is unstable at short wavelengths. In the transition from the multiscale branch to the ion-scale branch, the magnitude of the ion-scale poloidal wavenumber spectrum of the nonlinear turbulent energy flux increases and the magnitude of the high-wavenumber spectrum decreases. Here, the decrease in the electron-scale transport is due to nonlinear mixing with ion-scale fluctuations and the ion-scale-driven zonal flows. A shift in the total energy associated with the fluctuating electrostatic potential intensity from dominantly drift kinetic energy in the multiscale regime to dominantly potential intensity in the ion-scale regime is well-correlated with the trend in the total energy flux.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Submillimeter wave absorption of n-type InSb at low temperatures
The absorption coefficient of two high-purity n-InSb samples is measured in the 10-40 per cm range using Fourier transform spectroscopy. The absorption coefficient spectrum is presented for both samples at 4.2 K. It is also shown for the lower resistance sample cooled to 2.2 K and heated by dc bias to elevated electron gas temperatures of 7.5 and 17.9 K. ac Drude theory gives rather poor agreement with experiment at 2.2 and 4.2 K but does much better when the sample electron gas is heated. In contrast, a simple quantum mechanical theory of absorption based on inverse Bremsstrahlung yields promising agreement at the lower temperatures although its applicability is questionable. The non-Drudian absorption is shown to have a favorable effect on the performance of InSb hot-electron bolometers.
Brown, E. R.↗
Nondestructive evaluation of adhesive bond strength using the stress wave factor technique
Acousto-ultrasonic nondestructive evaluation has been conducted to evaluate the adhesive bond strength between rubber and steel plates using the stress wave factor (SWF) measurement technique. Specimens with different bond strength were manufactured and tested using the SWF technique. Two approaches were used to define the SWF. One approach defines the SWF as the signal energy and the other approach defines the SWF as the square root of the zero moment of the frequency spectrum of the received signal. The strength of the rubber-steel adhesive joint was then evaluated using the destructive peel strength test method. It was observed that in both approaches higher values of the SWF measurements correspond to higher values of the peel strength test data. Therefore, these results show that the stress wave factor technique has the potential of being used in quality assurance of the adhesive bond strength between rubber and steel substrates.
Dos Reis, Henrique L. M.↗