Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transit method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Direct numerical simulation of transitional and turbulent flow over a heated flat plate using finite-difference schemes

This report deals with the direct numerical simulation of transitional and turbulent flow at low Mach numbers using high-order-accurate finite-difference techniques. A computation of transition to turbulence of the spatially-evolving boundary layer on a heated flat plate in the presence of relatively high freestream turbulence was performed. The geometry and flow conditions were chosen to match earlier experiments. The development of the momentum and thermal boundary layers was documented. Velocity and temperature profiles, as well as distributions of skin friction, surface heat transfer rate, Reynolds shear stress, and turbulent heat flux, were shown to compare well with experiment. The results indicate that the essential features of the transition process have been captured. The numerical method used here can be applied to complex geometries in a straightforward manner.

Madavan, Nateri K.↗
NASA NTRS1995

Modeling of DC spacecraft power systems

Future spacecraft power systems must be capable of supplying power to various loads. This delivery of power may necessitate the use of high-voltage, high-power dc distribution systems to transmit power from the source to the loads. Using state-of-the-art power conditioning electronics such as dc-dc converters, complex series and parallel configurations may be required at the interface between the source and the distribution system and between the loads and the distribution system. This research will use state-variables to model and simulate a dc spacecraft power system. Each component of the dc power system will be treated as a multiport network, and a state model will be written with the port voltages as the inputs. The state model of a component will be solved independently from the other components using its state transition matrix. A state-space averaging method is developed first in general for any dc-dc switching converter, and then demonstrated in detail for the particular case of the boost power stage. General equations for both steady-state (dc) and dynamic effects (ac) are obtained, from which important transfer functions are derived and applied to a special case of the boost power stage.

Berry, F. C.↗
NASA NTRS1999

Configuration Aerodynamics: Past - Present - Future

The Configuration Aerodynamics (CA) element of the High Speed Research (HSR) program is managed by a joint NASA and Industry team, referred to as the Technology Integration Development (ITD) team. This team is responsible for the development of a broad range of technologies for improved aerodynamic performance and stability and control characteristics at subsonic to supersonic flight conditions. These objectives are pursued through the aggressive use of advanced experimental test techniques and state of the art computational methods. As the HSR program matures and transitions into the next phase the objectives of the Configuration Aerodynamics ITD are being refined to address the drag reduction needs and stability and control requirements of High Speed Civil Transport (HSCT) aircraft. In addition, the experimental and computational tools are being refined and improved to meet these challenges. The presentation will review the work performed within the Configuration Aerodynamics element in 1994 and 1995 and then discuss the plans for the 1996-1998 time period. The final portion of the presentation will review several observations of the HSR program and the design activity within Configuration Aerodynamics.

Wood, Richard M.↗
NASA NTRS1998

Effect of Free Stream Turbulence on the Flow-Induced Background Noise of In-Flow Microphones

When making noise measurements of sound sources in flow using microphones immersed in an air stream or wind tunnel, the factor limiting the dynamic range of the measurement is, in many cases, the noise caused by the flow over the microphone. To lower this self-noise, and to protect the microphone diaphragm, an aerodynamic microphone forebody is usually mounted on the tip of the omnidirectional microphone. The microphone probe is then pointed into the wind stream. Even with a microphone forebody, however, the self-noise persists, prompting further research in the area of microphone forebody design for flow-induced self-noise reduction. The magnitude and frequency characteristics of in-flow microphone probe self-noise is dependent upon the exterior shape of the probe and on the level of turbulence in the onset flow, among other things. Several recent studies present new designs for microphone forebodies, some showing the forbodies' self-noise characteristics when used in a given facility. However, these self-noise characteristics may change when the probes are used in different facilities. The present paper will present results of an experimental investigation to determine an empirical relationship between flow turbulence and self-noise levels for several microphone forebody shapes as a function of frequency. As a result, the microphone probe self-noise for these probes will be known as a function of freestream turbulence, and knowing the freestream turbulence spectra for a given facility, the probe self-noise can be predicted. Flow-induced microphone self-noise is believed to be related to the freestream. turbulence by three separate mechanisms. The first mechanism is produced by large scale, as compared to the probe size, turbulence which appears to the probe as a variation in the angle of attack of the freestream. flow. This apparent angle of attack variation causes the pressure along the probe surface to fluctuate, and at the location of the sensor orifice this fluctuating surface pressure is sensed by the diaphragm as noise. The second mechanism is caused by the convection of smaller sized turbulence, on the order of the probe cross-section, which passes nearby or strikes the probe giving rise to a fluctuating pressure at the sensor orifice. And, the third mechanism is related to fine scale turbulence through its effects on boundary layer growth and transition to a turbulent boundary layer. The method for relating the probe self-noise to the freestream turbulence will be based on the method of K. J. Young5 from Boeing, who developed the technique and presented flow noise results for a Bruel & Kjaer Type 0385, 1/4 inch (6.35 mm) nose cone. The experimental set-up used in the present experiment is similar to that of Young and is described in the present paper. Finally, flow noise predictions are made using the empirical correlations. These predictions are then compared with actual flow noise measurements made in the National Full-Scale Aerodynamics Complex 40- by 80-Foot Wind Tunnel at NASA Ames Research Center.

Allen, Christopher S.↗
NASA NTRS2004

Realtime Knowledge Management (RKM): From an International Space Station (ISS) Point of View

We are developing automated methods to provide realtime access to spacecraft domain knowledge relevant a spacecraft's current operational state. The method is based upon analyzing state-transition signatures in the telemetry stream. A key insight is that documentation relevant to a specific failure mode or operational state is related to the structure and function of spacecraft systems. This means that diagnostic dependency and state models can provide a roadmap for effective documentation navigation and presentation. Diagnostic models consume the telemetry and derive a high-level state description of the spacecraft. Each potential spacecraft state description is matched against the predictions of models that were developed from information found in the pages and sections in the relevant International Space Station (ISS) documentation and reference materials. By annotating each model fragment with the domain knowledge sources from which it was derived we can develop a system that automatically selects those documents representing the domain knowledge encapsulated by the models that compute the current spacecraft state. In this manner, when the spacecraft state changes, the relevant documentation context and presentation will also change.

Robinson, Peter I.↗
NASA NTRS2005

Optimal Sampling of a Reaction Coordinate in Molecular Dynamics

Estimating how free energy changes with the state of a system is a central goal in applications of statistical mechanics to problems of chemical or biological interest. From these free energy changes it is possible, for example, to establish which states of the system are stable, what are their probabilities and how the equilibria between these states are influenced by external conditions. Free energies are also of great utility in determining kinetics of transitions between different states. A variety of methods have been developed to compute free energies of condensed phase systems. Here, I will focus on one class of methods - those that allow for calculating free energy changes along one or several generalized coordinates in the system, often called reaction coordinates or order parameters . Considering that in almost all cases of practical interest a significant computational effort is required to determine free energy changes along such coordinates it is hardly surprising that efficiencies of different methods are of great concern. In most cases, the main difficulty is associated with its shape along the reaction coordinate. If the free energy changes markedly along this coordinate Boltzmann sampling of its different values becomes highly non-uniform. This, in turn, may have considerable, detrimental effect on the performance of many methods for calculating free energies.

Pohorille, Andrew↗
NASA NTRS2010

Exploring a Nearby Habitable World...Orbiting an M-Dwarf Star

Topics include: the landscape of extrasolar planets and detection techniques, direct and indirect detection methods, summary of the known exoplanets, exploiting transits to characterize super earth atmospheres, how to characterize exoplanet atmospheres, and emitted or reflected spectra of hot Jupiters.

Deming, Drake↗
NASA NTRS2016

Strategic Technologies for Deep Space Transport

Deep space transportation capability for science and exploration is fundamentally limited by available propulsion technologies. Traditional chemical systems are performance plateaued and require enormous Initial Mass in Low Earth Orbit (IMLEO) whereas solar electric propulsion systems are power limited and unable to execute rapid transits. Nuclear based propulsion and alternative energetic methods, on the other hand, represent potential avenues, perhaps the only viable avenues, to high specific power space transport evincing reduced trip time, reduced IMLEO, and expanded deep space reach. Here, key deep space transport mission capability objectives are reviewed in relation to STMD technology portfolio needs, and the advanced propulsion technology solution landscape is examined including open questions, technical challenges, and developmental prospects. Options for potential future investment across the full compliment of STMD programs are presented based on an informed awareness of complimentary activities in industry, academia, OGAs, and NASA mission directorates.

Technology↗
NASA NTRS2019

Aerodynamics for the ADEPT SR-1 Flight Experiment

Adaptable, Deployable, Entry, and Placement Technology (ADEPT) is a combination of a heatshield and an aerodynamic decelerator for atmospheric entry applications. The ADEPT Sounding Rocket (SR)-1 mission was a suborbital flight experiment of an 0.7 m-diameter ADEPT to verify system-level performance and to characterize dynamic stability behavior. The aerodynamic database for ADEPT SR-1 was constructed from non-continuum and continuum flowfield computations, along with data from recent ADEPT ground testing and the IRVE-3 flight test vehicle. High-altitude (free-molecular and transitional regimes) data were generated using DSMC methods. Pre-flight predictions of continuum static aerodynamics coefficients were derived from Reynolds-Averaged Navier-Stokes solutions at conditions along a design trajectory, with comparisons to available ground test data of the nano-ADEPT geometry. Dynamic pitch damping characteristics were taken from functional forms developed for the IRVE-3 flight test vehicle through ballistic range testing. Comparison of pre-flight predictions to post-flight reconstruction of aerodynamic force and moment coefficients is presented.

Korzun, Ashley M.↗
NASA NTRS2020

Nitric Oxide Laser-Induced Fluorescence Rotational Thermometry in a Hypersonic Non-Equilibrium Flow

Spatially-resolved nitric oxide (NO) planar laser-induced fluorescence (PLIF) rotational thermometry was performed on a Mach 5 non-equilibrium flow around a blunt-body specimen in the Hypersonic Materials Environmental Test System (HyMETS) arc-heat wind tunnel at the NASA Langley Research Center. Transitions within the (0,0) band in the A(exp⁡ 2)∑(sup⁡ +) - X(exp⁡ 2)Π system of NO were excited with a 10 Hz pulsed ultra-violet laser. A multi-line fitting algorithm was applied to the PLIF spectra and transitions were filtered based on an iterative method that maximizes thermometry accuracy. NO PLIF thermometry results are compared to non-equilibrium computational fluid dynamics (CFD) simulations reported in the literature. Differences between the experiment and CFD are quantified for the free-stream, post-shock, shear-layer, and expansion-fan regions of the flow. Potential sources of error, applicable to both the CFD and experiment, are discussed.

Connor C McDougall↗
NASA NTRS2019

Machine Learning, Markov Chain Monte Carlo, and Optimal Algorithms to Characterize the AdvACT Kilopixel Transition-Edge Sensor Arrays

Next-generation focal planes comprising dozens of kilopixel transition-edge sensor (TES) arrays require new methods to rapidly screen candidate arrays, evaluate array non-idealities in the field, identify outlier devices for removal, and optimize the array performance in the field. We demonstrate robust methods to estimate TES parameters (critical temperatures and thermal conductivity parameters) and their uncertainties using a custom Markov Chain Monte Carlo (MCMC) algorithm. We also constrain systematic effects in estimating the TES parameters from non-isothermal current-voltage curves (IVs) at approximately a ~3% level. Additionally, for the first time, we have applied Machine Learning (ML) algorithms to tune detector arrays and optimize their performance.

Maria Salatino↗
NASA NTRSDate not supplied

Overview of Fuel System Options for Nuclear Thermal Propulsion

An in-space propulsion technology, nuclear thermal propulsion (NTP) has the potential to enable faster interplanetary transit times compared to traditional chemical propulsion methods due to its capacity for high specific impulse (900+ s) and thrust (~10 – 100 klbf). Because of these performance attributes, NTP is currently one of several advanced propulsion technologies currently under consideration by the National Aeronautics and Space Administration (NASA) for future crewed Mars missions. The performance of NTP systems is directly contingent upon the development of a robust fuel form capable of withstanding high-power densities and operation in a hydrogen environment at temperatures in excess of 2500 K. This presentation will overview development needs for fuels in NTP systems, historic and current NTP fuel system options, and their remaining challenges prior to successful implementation.

nuclear thermal propulsion↗
NASA NTRSDate not supplied

Preliminary Results Using Galvanic Vestibular Reduction as a Non-Pharmaceutical Tool for Motion Sickness Mitigation

Introduction: Alterations in vestibular sensory processing following G-transitions lead to motion sickness and spatial disorientation upon return to Earth’s gravity. The use of non-pharmaceutical mitigation for motion sickness has several potential advantages over drug treatment options. The purpose of this study was to validate a non-pharmaceutical tool using galvanic vestibular reduction (GVR) to mitigate G-transitional induced motion sickness and spatial disorientation. Methods: Using a repeated measures counter-balanced design, motion sickness and perception are obtained during Coriolis cross-coupling stimuli on a rotating chair across three GVR treatment interventions: throughout stimulus testing (prevention), following symptom onset (rescue), and placebo control. Subjects perform up to 10 sets of pitch head movements during constant rotation. For each set, head movement is cued every 10 seconds, alternating between pitch forward (chin resting to chest) and pitch backward (head upright) for a total of 7 forward and backward movements. During each head movement, subjects are asked to use a joystick to record the magnitude of their perceived rotation along all three axes. During the 2-minute pause between sets, motion sickness symptom scoring was obtained using the Pensacola Diagnostic Index and subject discomfort (0-20) ratings. Performance on a sensorimotor and cognitive test battery is measured during a fourth session to map changes in GVR level with functional performance. Results: Fifteen of 30 subjects have completed testing to date. Preliminary findings suggest GVR may be more effective in reducing symptoms in subjects who self-report less susceptibility on a pre-test motion sickness susceptibility questionnaire. Based on the joystick measures, GVR significantly reduces both the magnitude (mean 22% - 34%) and duration (mean 42% - 49%) of perceived roll and pitch sensation with head movements during constant rotation. It is important to note that comparable levels of GVR (up to 2.5mA) does not impair performance on a functional test battery including mobility and balance tasks. Discussion: Our preliminary findings suggest GVR may be useful in reducing disorienting roll and pitch illusions associated with Coriolis cross-coupling stimuli. While transfer to post-flight treatment will need to be validated, the potential advantages of our non-pharmaceutical countermeasure approach would be to provide rapid therapeutic effect while allowing continuous titration of GVR amplitude during recovery to maintain operational performance.

Gaurav Pradhan↗
DOE OSTI2018

Continuous flow synthesis of VO2 nanoparticles or nanorods by using a microreactor

The invention provides a method for producing composite nanoparticles, the method using a first compound capable of transitioning from a monoclinic to a tetragonal rutile crystal state upon heating, and having the steps of subjecting the first compound to a hydrothermal synthesis to create anisotropic crystals of the compound; encapsulating the first compound with a second compound to create a core-shell construct; and annealing the construct as needed. Also provided is a device for continuously synthesizing composite nanoparticles, the device having a first precursor supply and a second precursor supply; a mixer to homogeneously combine the first precursor and second precursor to create a liquor; a first microreactor to subject the liquor to hydrothermic conditions to create an\isotropic particles in a continuous operation mode; and a second microreactor for coating the particles with a third precursor to create a core-shell construct.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Performance of the rigorous renormalization group for first-order phase transitions and topological phases

Expanding and improving the repertoire of numerical methods for studying quantum lattice models is an ongoing focus in many-body physics. While the density matrix renormalization group (DMRG) has been established as a practically useful algorithm for finding the ground state in one-dimensional systems, a provably efficient and accurate algorithm remained elusive until the introduction of the rigorous renormalization group (RRG) by Landau [Nat. Phys. 11, 566 (2015)1745-247310.1038/nphys3345]. In this paper, we study the accuracy and performance of a numerical implementation of RRG at first-order phase transitions and in symmetry-protected topological phases. Our study is motivated by the question of when RRG might provide a useful complement to the more established DMRG technique. In particular, despite its general utility, DMRG can give unreliable results near first-order phase transitions and in topological phases, since its local update procedure can fail to adequately explore (near-)degenerate manifolds. Furthermore, the rigorous theoretical underpinnings of RRG, meanwhile, suggest that it should not suffer from the same difficulties. We show this optimism is justified, and that RRG indeed determines well-ordered, accurate energies even when DMRG does not. Moreover, our performance analysis indicates that in certain circumstances seeding DMRG with states determined by coarse runs of RRG may provide an advantage over simply performing DMRG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

The partial reduction of clean and doped alpha-Fe2O3(0001) from first principles

Fe surfaces have a wide range of applications due to the ability of Fe to be present in a number of different oxidation states, which can be further influenced by the presence of dopants that change the energetic and electronic surface properties. Thus, having an understanding of the elementary reduction processes of clean Fe oxide surfaces, and how dopants affect the energetics and electronics of such processes, is crucial to the science-guided design and optimization of said surfaces. In this work, we use density functional theory (DFT) to investigate the partial reduction of a-Fe2O3(0001) in the absence and presence of Pd and Pt dopants. In order to account for the strong on-site Coulombic interactions present in transition metal oxides, we used both the DFT?+?U method and 2006 Heyd-Scuseria-Ernzerhof functional and compare the results obtained from the different methods. We find that oxygen vacancies created in the clean a-Fe2O3(0001) surface prefer to diffuse into a subsurface layer, with the charge left behind from the first surface oxygen vacancy distributing between all of the near surface Fe atoms. The addition of Pd or Pt to the a-Fe2O3(0001) surface significantly decreases the energy required to create the first surface oxygen vacancy, suggesting the dopants intrinsically promote the reduction of a-Fe2O3(0001). Additionally, the presence of the dopants caused the charge left behind by the creation of the first surface oxygen vacancy to be localized on the dopant itself as well as the highest Fe atom. Overall, this work provides insight into the elementary energetic and electronic properties of the fully oxidized and partially reduced a-Fe2O3(0001) surface in the absence and presence of Pd and Pt dopants, which has potential implications for the design and optimization of doped Fe oxide surfaces.

Hensley, Alyssa↗
DOE OSTI2026

Uniaxial tensile mechanical properties from a scratch on ultra-fine grained tungsten

We demonstrate that surface-based mechanical testing can be used to quantify a wide range of mechanical properties determined using traditional uniaxial tension experiments. These include mapping of dynamic stress–strain behaviour, which can be used as a screening tool for uniaxial tensile ductility (uniform elongation), fracture toughness (K C ), which is shown to be in good agreement with reported plane-strain K IC , as well work-hardening exponents (n), activation volumes (V) energies (Q) and strain-rate sensitivity (m) exponents as a function of temperature. Advantages of the surface-based approach are the ability to work with significantly smaller volumes and accommodate processing defects like pores, voids and cracks. These methods are applied to ultra-fine grained tungsten (average grain size of 650 nm), as it is an ideal candidate for alloy development efforts in advanced energy systems. Tungsten is a useful baseline as it exhibits a near-ambient temperature (approx. 200°C) ductile-to-brittle transition temperature (DBTT), enabling validation efforts for the proposed methods, and extraordinary material properties, including the highest melting temperature of any metal and complex temperature and strain-rate dependencies linked to transitions in dislocation mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Investigations of Properties of {sup 89}Y Levels with Reactor Fast Neutrons

By employing a beam of reactor fast neutrons, the spectrum of gamma rays up to an energy of 4.6MeV and their angular distributions with respect to the neutron-beamaxis aremeasured in the reaction {sup 89}Y(n, n'γ). The multipolarities and multipole-mixture parameters for 34 gamma transitions and the spin–parities J{sup π} of states excited in this reaction are determined. The lifetimes of the lowest 32 levels of 89Y were measured by the Doppler shift attenuation method, and the reduced probabilities for the respective gamma transitions were calculated. Levels of the K{sup π} = +5/2{sup +} and K{sup π} = −7/2{sup +} bands associated with, respectively, prolate and oblate deformation shapes are found in {sup 89}Y at low excitation energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗