Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reduced‐Order Probabilistic Emulation of Physics‐Based Ring Current Models: Application to RAM‐SCB Particle Flux

Abstract In this work, we address the computational challenge of large‐scale physics‐based simulation models for the ring current. Reduced computational cost allows for significantly faster than real‐time forecasting, enhancing our ability to predict and respond to dynamic changes in the ring current, valuable for space weather monitoring and mitigation efforts. Additionally, it can also be used for a comprehensive investigation of the system. Thus, we aim to create an emulator for the Ring current‐Atmosphere interactions Model with Self‐Consistent magnetic field (RAM‐SCB) particle flux that not only improves efficiency but also facilitates forecasting with reliable estimates of prediction uncertainties. The probabilistic emulator is built upon the methodology developed by Licata and Mehta (2023), https://doi.org/10.1029/2022sw003345 . A novel discrete sampling is used to identify 30 simulation periods over 20 years of solar and geomagnetic activity. Focusing on a subset of particle flux, we use Principal Component Analysis for dimensionality reduction and Long Short‐Term Memory (LSTM) neural networks to perform dynamic modeling. Hyperparameter space was explored extensively resulting in about 5% median symmetric accuracy across all data sets for one‐step dynamic prediction. Using a hierarchical ensemble of LSTMs, we have developed a reduced‐order probabilistic emulator (ROPE) tailored for time‐series forecasting of particle flux in the ring current. This ROPE offers accurate predictions of omnidirectional flux at a single energy with no pitch angle information, providing robust predictions on the test set with an error score below 11% and calibration scores under 8% with bias under 2% providing a significant speed up as compared to the full RAM‐SCB run.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Geothermal Representation in Power System Models

Power system models generally fail to capture the range of characteristics geothermal resources provide and the value they potentially contribute to decarbonization and reliability of future electricity grids as firm, dispatchable, non-combustion power resources. This study reviews the results of power system modeling efforts to investigate geothermal deployment potential in the United States, including the U.S. DOE GeoVision analysis and ongoing modeling and analysis efforts to support planning and development of future grids with 100% renewable energy in California. Several themes are identified that could be implemented immediately to improve the accuracy of geothermal representation in power system models: consistency of model inputs, modeling of baseload and dispatchable geothermal resources, accurate valuation of grid services, improved representation of capacity factor, use of contemporary LCOE estimates, improved understanding of the evolution of geothermal value, and use of accurate resource potential constraints. Many of the models reviewed produced significantly different amounts of geothermal resource selection - even when modeling the same region and time period. This highlights the variability of inputs and assumptions among models, so creating a consistent set of geothermal inputs is a first step toward more accurate representation of geothermal in models. Research opportunities are identified that could help improve geothermal data inputs in modeling efforts, including analyses of historical data, sensitivity to model inputs, and comparative value of geothermal generators as baseload or dispatchable resources. Outcomes of such research can inform the geothermal community about how best to guide geothermal development toward wider deployment in support of future electricity grids through improved understanding of the evolution of geothermal value over time and the characteristics that contribute to that value.

capacity expansion models↗
DOE OSTI2022

Robust palladium hydride catalyst for electrocatalytic formate formation with high CO tolerance

Palladium is unique in the electrocatalytic reduction of CO 2 to formate because of its low or even near-equilibrium onset potential. However, the inevitably produced CO molecules poison and deactivate the catalyst surface, resulting in an insufficient operating lifetime (<30 min) for conventional and optimized Pd catalysts. In this work, we present a hydrogen-rich Palladium hydride catalyst (PdH0.5/C) derived from a one-step solvothermal synthesis. This catalyst showed a 93.1 % faradaic efficiency towards formate at – 0.4 V (vs RHE). The working lifetime reached a record of 4 h, which was ~15 times longer than a commercial Pd catalyst and outperformed all previous Pd-based electrocatalysts for CO 2 -HCOO – conversion. The high CO tolerance was attributed to the selectivity improvement induced by lattice hydrogen and the weak CO adsorption strength on diverse active sites (i.e. kink, step, and terrace). Isotopic analysis revealed a direct participation of the lattice hydrogen in the protonation of CO 2 molecules in formate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A quantum trajectory picture of single photon absorption and energy transport in photosystem II

Here, we use quantum trajectory theory to study the dynamics of the first step in photosynthesis for a single photon interacting with photosystem II (PSII). By considering individual trajectories we are able to look beyond the ensemble average dynamics to compute the PSII system evolution conditioned upon individual photon counting measurements. Measurements of the transmitted photon beam strongly affects the system state, since detection of an outgoing photon confirms that the PSII must be in the electronic ground state, while a null measurement implies it is in an excited electronic state. We show that under ideal conditions, observing the null result transforms a state with a low excited state population to a state with nearly all population contained in the excited states. We study the PSII dynamics conditioned on such photon counting for both a pure excitonic model of PSII and a more realistic model with exciton-phonon coupling to a dissipative phononic environment. In the absence of such coupling, we show that the measured fluorescence rates show oscillations constituting a photon-counting witness of excitonic coherence. Excitonic coupling to the phonon environment has a strong effect on the observed rates of fluorescence, damping the oscillations. Addition of non-radiative decay and incoherent transitions to radical pair states in the reaction center to the phononic model allows extraction of a quantum efficiency of 92.5% from the long-time evolution, consistent with bulk experimental measurements.

Coherent states↗
DOE OSTI2023

New Chemical Dopant and Counterion Mechanism for Organic Electrochemical Transistors and Organic Mixed Ionic–Electronic Conductors

Abstract Organic mixed ionic–electronic conductors (OMIECs) have varied performance requirements across a diverse application space. Chemically doping the OMIEC can be a simple, low‐cost approach for adapting performance metrics. However, complex challenges, such as identifying new dopant materials and elucidating design rules, inhibit its realization. Here, these challenges are approached by introducing a new n‐dopant, tetrabutylammonium hydroxide (TBA‐OH), and identifying a new design consideration underpinning its success. TBA‐OH behaves as both a chemical n‐dopant and morphology additive in donor acceptor co‐polymer naphthodithiophene diimide‐based polymer, which serves as an electron transporting material in organic electrochemical transistors (OECTs). The combined effects enhance OECT transconductance, charge carrier mobility, and volumetric capacitance, representative of the key metrics underpinning all OMIEC applications. Additionally, when the TBA + counterion adopts an “edge‐on” location relative to the polymer backbone, Coulombic interaction between the counterion and polaron is reduced, and polaron delocalization increases. This is the first time such mechanisms are identified in doped‐OECTs and doped‐OMIECs. The work herein therefore takes the first steps toward developing the design guidelines needed to realize chemical doping as a generic strategy for tailoring performance metrics in OECTs and OMIECs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

One‐Pot Synthesis of Xanthone by Carbonylative Suzuki Coupling Reaction

Abstract Xanthone derivatives have a dibenzo‐y‐pyrone scaffold which has gained great interest in Medicinal Chemistry due to their diverse biological activities. Usually, its synthesis requires multi‐step synthetic routes using harsh conditions and high catalyst loadings. In this communication, we report for the first time a one‐pot synthesis of the xanthone scaffold based on a carbonylative Suzuki coupling. Iodophenol and (2‐methoxyphenyl)boronic acid were coupled under carbon monoxide, generated from a carbon monoxide surrogate. An experimental data‐based model was built to guide the reaction optimization. The optimized conditions were 1 mol% of a pincer complex as palladium catalyst, 5 equivalents of K 2 CO 3 as base, and DMF:water (7 : 3) as solvent. The robustness of the synthetic method, namely in terms of the reactants scope, was also evaluated. This approach provided the xanthone scaffold in high yields and provided a deep insight into the carbonylative Suzuki couplings.

Loureiro, Daniela R. P.↗
DOE OSTI2025

An end-to-end deep learning solution for automated LiDAR tree detection in the urban environment

Cataloging and classifying trees in the urban environment is a crucial step in urban and environmental planning; however, manual collection and maintenance of this data is expensive and time-consuming. Although algorithmic approaches that rely on remote sensing data have been developed for tree detection in forests, they generally struggle in the more varied urban environment. This work proposes a novel end-to-end deep learning method for the detection of trees in the urban environment from remote sensing data. Specifically, we develop and train a novel PointNet-based neural network architecture to predict tree locations directly from LiDAR data augmented with multi-spectral imagery. We compare this model to a number of high-performing baselines on a large and varied dataset in the Southern California region, and find that our method outperforms all baselines in terms of tree detection ability (75.5% F-score) and positional accuracy (2.28 meter root mean squared error), while being highly efficient. We then analyze and compare the sources of errors, and how these reveal the strengths and weaknesses of each approach. Our results highlight the importance of fusing spectral and structural information for remote sensing tasks in complex urban environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Indicators of carbon alteration (ICAs) suggest patterns in reservoir methane emissions

Reservoir operations influence emissions via multiple causal pathways. In this paper, we quantify indicators of carbon alteration (ICAs) focused on methane. ICAs were chosen to reflect the potential for methane emission along four causal pathways: 1) water column mixing, 2) wet-dry cycles in sediment, 3) sediment redistribution, and 4) vegetation. We developed algorithms to calculate ICAs for three reservoirs along a longitudinal gradient in the Tennessee River basin of the southeast US. The ICAs revealed interesting longitudinal patterns. Indicators of both methane production and destruction increased downstream. The potential for ebullitive methane emissions driven by sub-daily water level fluctuations and emissions mediated by vegetation were higher in downstream mainstem reservoirs than in the upstream tributary reservoir. Along the remaining two pathways, longitudinal patterns were equivocal (sediment pathway) or suggested decreased emissions downstream (water-column mixing). We also observed seasonal patterns and, by combining ICAs, inferred times when ramping could be achieved with lower risk of emissions. The ICAs demonstrated here are the first step in quantifying mechanistic relationships between reservoir operation and methane emissions. In future, they may lead to improved operations in reservoir cascades and regional-scale estimates of emissions that account for differences among reservoirs.

Greenhouse gases↗
DOE OSTI2020

A Novel Relative Permeability Model for Gas and Water Flow in Hydrate-Bearing Sediments With Laboratory and Field-Scale Application

In a producing gas hydrate reservoir the effective porosity available for fluid flow constantly changes with dissociation of gas hydrate. Therefore, accurate prediction of relative permeability using legacy models (e.g. Brooks-Corey (B-C), van Genuchten, etc.) that were developed for conventional oil and gas reservoirs would require empirical parameters to be calibrated at various S h over its range of variation, but such calibrations are precluded because of lack of experimental relative permeability data. This study proposes a new relative permeability model for gas hydrate-bearing media that is a function of maximum capillary pressure, capillary entry pressure, pore size distribution index, residual saturations, hydrate saturation, and four other constants. The three novel features of the proposed model are: (i) requires fitting its six empirical parameters only once using experimental data from any single S h , and the same set of empirical parameters predict relative permeability at all S h , (ii) includes the effect of capillarity, and (iii) includes the effect of pore-size distribution. From practical standpoint, the model can be used to simulate multiphase flow in gas hydrate-bearing sediments where the proposed relative permeability can account for the evolving hydrate saturation. The proposed model is implemented in a numerical simulator and the wall time required to perform simulations using the proposed model is shown to be similar to the time it takes to run same simulations with the B-C model. The proposed model is a step forward towards achieving the goal of physically accurate modeling of multiphase flow for gas hydrate-bearing sediments that accounts for the effect of gas hydrate saturation change on relative permeability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Method for boosting dispersive spectrograph stability 1000× using interferometry with crossfaded pairs of delays

We demonstrate a key step along a technical route to achieving cm/s scale accuracy for astronomical spectrographs over long (multi-year) time scales, which is critical for the Doppler characterization of Earth sized exoplanets, and measurement of small cosmic redshift drift over many years. This same technique also enables searching exoplanet atmospheres for biosignificant molecules in direct planet imaging using, otherwise, insufficiently low resolution and drift prone dispersive (grating or prism) spectrographs. Using a method called crossfading for externally dispersed interferometers (EDIs) to get highly robust spectra, we recently demonstrated a factor of 1000 x reduction in the net shift of an EDI measured ThAr line to a deliberate simulated wavelength translation of the detector. This 1000 x gain in disperser stability can be combined with conventional stability gains afforded by fiber scramblers, vacuum tanks, and thermal control, to provide an additional 1 to 3 orders of magnitude reduction in the net point spread function shift drift. Crossfading combines high- and low-delay fringing signals that react oppositely in phase to cancel their net reaction to a detector wavelength drift. This can be implemented by an interferometer addition to a facility spectrograph.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Development of a three-dimensional APOLLO3 neutrons deterministic scheme for the CABRI reactor

CABRI is an experimental reactor to study the fuel behavior during reactivity injection transients. These transients being highly multiphysics, the development of suitable modeling and simulation tools to simulate them is important for the optimization of the tests and the control of the experimental conditions. This paper focuses on the development of an APOLLO3 deterministic core calculation tool dedicated to the CABRI transient analysis. It represents the first stage of the incremental process for the implementation of a multiphysics time-dependent modeling of the CABRI transient. The neutron calculation scheme is based on a classical two-step approach. The first step consists of a 281-energy group calculation flux with the TDT-MOC (Method Of Characteristics) solver for cross-section space and energy (23 groups) collapsing for the CABRI different assembly clusters. The bias on a 2D core neutron calculation due to the self-shielding calculation and collapsing on a restricted pattern are investigated thanks to a comparison with a direct full 2D calculation on a quarter of core. The second step relies on a pin-resolved transport 3D transport core calculation with the SN solver MINARET. A progressive numerical validation process is followed to quantify the calculation biases on reactivity and reaction rates at each step using reference calculations with the stochastic code TRIPOLI4. The next development stage toward a multiphysics scheme will be the implementation of the 3D-kinetics equation resolution and the coupling with a core thermal-hydraulics model. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Regal Beloit Final Technical Report

The original project proposal submitted from NovaTorque Inc (NovaTorque) in 2016 was to improve the existing motor with 95% efficiency by reducing the losses by 21% to achieve 96%. A few months after the proposal was submitted, NovaTorque lost funding and went out of business. The assets of NovaTorque were then acquired by Regal Beloit Corporation (“Regal Beloit” or “Regal”). When the NovaTorque proposal was selected, the project was transferred to Regal Beloit. Once we had production samples from the new Regal production line, they were tested at the Regal Beloit test lab in Wausau, WI. The original NovaTorque motor had an efficiency of 95%, but when the technology was transferred to Regal Beloit, there were multiple manufacturing improvements made, even though the basic electromagnetic design did not change. The test results in Wausau showed that the motors made at the Regal Beloit plant had an efficiency of 96%. Since the goal of the project was to reduce the losses by 21%, a new efficiency target of 96.8% became the project objective. In the first budget period, motors were tested to get the baseline performance. We then used FEA modeling with ANSYS Maxwell to model the existing motor to get correlation between the FEA simulations and the actual test results. Once the model was validated, we evaluated some changes that could be made to the stator to reduce the losses and improve efficiency without changing the rotor or stator housing, keeping the modifications easy to implement. The changes were primarily in the area of making the stator axially shorter and adding Soft Magnetic Composite (SMC) tooth tips. In the second budget period, we proceeded to design and build the new stator that was identified above and identified additional improvements in the process that included a stator machining modification and the use of rectangular wire. When we actually built the motor, the choice of rectangular wire turned out to be a problem. The wire was made by squishing round wire to get the rectangular shape, which caused work hardening, making the wire too stiff to make the desired coils. We shifted to annealed square wire which was better, but we still could not maintain the proper coil envelope. The result was that we had reduced cross section area for stator laminations. We also had to have a radial offset resulting in a radial misalignment between the stator and rotor because of the oversized coils. After the motor was completed, it was shipped to Texas A&M University for testing. With the loss of flux from these issues, the measured motor efficiency was only 96.3%. The primary focus of this motor was to make sure our FEA simulation model predicted the measured losses and overall efficiency, this we moved on to the FEA simulation. The FEA simulations of the motor “as built” with misalignments had good correlation with the test results, so the next step was to use that model to optimize the design of the motor for a final build. This time we considered changes to the stator and rotor and also minor changes to the housing diameter. In the third budget period, we did the detailed design and construction of the final prototypes. The final prototypes had a slight increase in the stator diameter to fit in a standard Regal Beloit housing. We shortened the stator and use more layers of wire in the coils. We also increased the cone angle of the rotor and stator from the original 110 degrees to 130 degrees to get some additional efficiency and optimized the stator cross section. The predicted efficiency from the FEA simulations was 96.9%. When completed, the motors were tested. We were a little short of reaching our target efficiency goal of 96.8%. We were only able to get to 96.7% efficiency. While it may be possible with additional iterations in designs and future builds to gain that additional 0.1%, we believe that we are close to the best we can achieve from a practical viewpoint, and additional iterations would be more work than the potential gains would be worth. No other motor in this class can even reach the 96% that we started with.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Low-cost, high-efficiency III-V photovoltaics enabled by remote epitaxy through graphene (Final Technical Report)

One of the most important outcomes of this project was that the team developed a method to directly grow graphene layer in wafer-scale on III-V substrates. Conventionally, graphene had to be transferred for remote epitaxy, which has imposed significant challenges in scalability, film quality, and substrate recycling, due to the transfer-related issues. The newly developed method of directly forming 2D layers by Metal-Organic Chemical Vapor Deposition (MOCVD) has realized wafer-scale, defect-free graphene formation for remote epitaxy, which has huge implications not only for solar cells but also in expanding the scalability and the possibility for heterointegration with dissimilar material platforms. Another important outcome was on better understanding of remote epitaxy mechanism. The growth of III-V on graphene is vastly different from directly growing films on III-V substrates, because the surface energy of graphene is very small, meaning that the nucleation density on graphene will be much lower than exposed III-V surfaces. Also, the graphene and the interface properties critically affect remote interaction through graphene. With this obtained knowledge regarding III-V remote epitaxy, we were able to achieve wafer-scale single-crystalline remote epitaxy, 100% exfoliation of the remote epitaxial films, as well as multiple times of GaAs wafer reusability demonstration. The general rule of thumbs found during this project will be a stepping stone for the growth and fabrication of various high-performance devices by remote epitaxy. Lastly, because remote epitaxy and 2DLT offer a pathway to isolate single-crystal membranes from the host wafers, the wafer-scale remote epitaxy processes developed in this project could open up pathways for new functionality and multi-functionality by heterointegration of remote epitaxially formed membranes.

14 SOLAR ENERGY↗
DOE OSTI2024

Report on the Integration of Experimental and Modeling Data for Initial Equivalence Study of Microstructural Evolution in Irradiated LPBF 316SS

Advanced materials and manufacturing technologies are poised to improve the safety and design characteristics of nuclear technologies and meet US energy, environmental, and economic needs. In particular, metal additive manufacturing (AM) provides an opportunity to produce novel materials and component geometries, but their use is not without hurdles arising from the inherent microstructure variability that can result from the layer-by-layer build approach. Given the greater possible microstructure variability in AM materials—and the dearth of materials test reactors—it is impractical to rely solely on neutron irradiation studies to produce data for materials qualification for every possibility. This work within the Advanced Materials and Manufacturing Technologies (AMMT) Environmental Effects technical area contributes to the rapid qualification framework by developing a science-driven framework for the accelerated qualification of materials for nuclear environments. A key product of the Environmental Effects technical area of the AMMT program is the Licensing Approach with Ions and Neutrons (LAIN). This approach recognizes that whether using existing materials in new environments, newly developed materials tailored for these environments, or new manufacturing methods, the traditional decades-long approach for materials qualification does not facilitate rapid deployment. In FY 2023, the AMMT program presented a conceptual framework of specific steps to fulfill several technical challenges associated with qualifying materials for performance in radiation environments on an accelerated time frame informed by the state of the art in materials science and a review of the current regulatory landscape. The objective of this section of the Environmental Effects technical area is to critically evaluate and refine the proposed qualification framework presented under AMMT by integrating the research results of the neutron irradiations, the ion irradiations, and modeling efforts. These ongoing efforts span across Argonne National Laboratory (ANL), Idaho National Laboratory (INL), and Oak Ridge National Laboratory (ORNL) and are closely coordinated.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The ocean model for E3SM global applications: Omega version 0.1.0 – a new high-performance computing code for exascale architectures

This paper introduces Omega, the Ocean Model for E3SM Global Applications. Omega is a new ocean model designed to run efficiently on high performance computing (HPC) platforms, including exascale heterogeneous architectures with accelerators, such as Graphics Processing Units (GPUs). Omega is written in C and uses the Kokkos performance portability library. These were chosen because they are well-supported and will help future-proof Omega for upcoming HPC architectures. Omega will eventually replace the Model for Prediction Across Scales-Ocean (MPAS-Ocean) in the US Department of Energy's (DOE's) Energy Exascale Earth System Model (E3SM). Omega runs on unstructured horizontal meshes with variable-resolution capability and implements the same horizontal discretization as MPAS-Ocean. This work documents the design and performance of Omega Version 0.1.0 (Omega-V0), which solves the shallow water equations with passive tracers and is the first step towards the full primitive equation ocean model. On Central Processing Units (CPUs), Omega-V0 is 1.4 times faster than MPAS-Ocean with the same configuration. Omega-V0 is more efficient on GPUs than CPUs on a per-watt basis – by a factor of 5.3 on Frontier and 3.6 on Aurora, two of the world's fastest exascale computers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

BESSIE: Battery & Energy Storage Supply Chain Analysis, Mitigation Deployment, and Tools

Battery energy storage systems (BESS) and their associated power electronic interfaces are key components to delivering clean and more resilient energy, providing much-needed fast-ramping, emergency discharge, generation, and operations support to the electric grid. These services have grown to be invaluable over the past ten years and will soon be an irreplaceable element of energy delivery. The Idaho National Laboratory (INL) strives to address these challenges through a strategic approach to supply chain risk assessment and mitigation for BESS and related digital energy equipment through the BESSIE project under the Center for Securing Digital Energy Technology. Recognizing that decreasing dependence on a foreign supply chain will take significant time and investment, BESSIE’s focus is strategically addressing battery supply chain risks by pairing short-term steps to operate securely through today’s risks with long-term steps to shape the supply chain over the coming years.

25 ENERGY STORAGE↗
DOE OSTI2024

Temporal evolution of the light emitted by a thin, laser-ionized plasma source

We present an experimental and simulation-based investigation of the temporal evolution of light emission from a thin, laser-ionized helium plasma source. We demonstrate an analytic model to calculate the approximate scaling of the time-integrated, on-axis light emission with the initial plasma density and temperature, supported by the experiment, which enhances the understanding of plasma light measurement for plasma wakefield accelerator (PWFA) plasma sources. Our model simulates the plasma density and temperature using a split-step Fourier code and a particle-in-cell code. A fluid simulation is then used to model the plasma and neutral density, and the electron temperature as a function of time and position. We then show the numerical results of the space-and-time-resolved light emission and that collisional excitation is the dominant source of light emission. We validate our model by measuring the light emitted by a laser-ionized plasma using a novel statistical method capable of resolving the nanosecond-scale temporal dynamics of the plasma light using a cost-effective camera with microsecond-scale timing jitter. This method is ideal for deployment in the high radiation environment of a particle accelerator that precludes the use of expensive nanosecond-gated cameras. Our results show that our models can effectively simulate the dynamics of a thin, laser-ionized plasma source. In addition, this work provides a detailed understanding of the plasma light measurement, which is one of the few diagnostic signals available for the direct measurement of PWFA plasma sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Planets Across Space and Time (PAST). II. Catalog and Analyses of the LAMOST–Gaia–Kepler Stellar Kinematic Properties

The Kepler telescope has discovered over 4000 planets (candidates) by searching ~200,000 stars over a wide range of distance (order of kpc) in our Galaxy. Characterizing the kinematic properties (e.g., Galactic component membership and kinematic age) of these Kepler targets (including the planet candidate hosts) is the first step toward studying Kepler planets in the Galactic context, which will reveal fresh insights into planet formation and evolution. In this paper, the second part of the Planets Across the Space and Time (PAST) series, by combining the data from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) and Gaia and then applying the revised kinematic methods from PAST I, we present a catalog of kinematic properties (i.e., Galactic positions, velocities, and the relative membership probabilities among the thin disk, thick disk, Hercules stream, and the halo) as well as other basic stellar parameters for 35,835 Kepler stars. Further analyses of the LAMOST–Gaia–Kepler catalog demonstrate that our derived kinematic age reveals the expected stellar activity-age trend. Furthermore, we find that the fraction of thin (thick) disk stars increases (decreases) with the transiting planet multiplicity (N {sub p} = 0, 1, 2 and 3+) and the kinematic age decreases with N {sub p}, which could be a consequence of the dynamical evolution of planetary architecture with age. The LAMOST–Gaia–Kepler catalog will be useful for future studies on the correlations between the exoplanet distributions and the stellar Galactic environments as well as ages.

47 OTHER INSTRUMENTATION↗