Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “threshold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Fine structure in the optical-absorption edge of silicon.

Investigation of the dependence of the photocurrent generated in silicon p-n junctions on the energy of the incident photons to obtain details concerning the fine structure in the indirect optical-absorption edge of silicon. It is found that at room temperature there are three prominent thresholds in the absorption tail. The first, which is not too well defined, occurs at 0.91 eV, the second at 0.99 eV, and the third at 1.026 eV. The dependence of the absorption coefficient on the photon energy following the latter two thresholds is found to differ from that found by Mcfarlane et al. (1958). The threshold energies and temperature dependence of the absorption coefficient suggest that two- and three-phonon processes give rise to the absorption tail. In the transverse-optical phonon-absorption region more structure is found in the absorption coefficient than is accounted for by the theory.

Anagnostopoulos, C.↗

Optical communication system performance with tracking error induced signal fading.

System performance is determined for an optical communication system using noncoherent detection in the presence of tracking error induced signal fading assuming (1) binary on-off modulation (OOK) with both fixed and adaptive threshold receivers, and (2) binary polarization modulation (BPM). BPM is shown to maintain its inherent 2- to 3-dB advantage over OOK when adaptive thresholding is used, and to have a substantially greater advantage when the OOK system is restricted to a fixed decision threshold.

Tycz, M.↗

Effects of solar wind composition, anisotropy, and streaming on ordinary mode electromagnetic instability

The stability of the low-frequency waves propagating transverse to the magnetic field of a plasma composed of electrons, protons, and alpha particles with anisotropic electron and ion temperatures is explored. The threshold for the ordinary mode instability and the growth rates have a very strong dependence on the electron temperature anisotropy but have a comparatively weaker dependence on the ion temperature anisotropy, on the relative abundance of helium to hydrogen, and on the relative streaming of two ion species. The threshold for the instability of these low-frequency waves is (m sub e/m sub p) to the 1/2 power times smaller than the one corresponding to high-frequency waves; however, for a relative abundance of helium to hydrogen up to 20% for the relevant known magnetic fields, particle densities, temperatures, and drifts, the solar wind remains below the threshold for this instability.

Buti, B.↗

Flight test measurements and analysis of sonic boom phenomena near the shock wave extremity

A NASA flight test program conducted during the summer and fall of 1970 was devoted to investigating sonic boom phenomena near caustics formed by steady flight near the threshold Mach number, during accelerations, and at the lateral extremes of the ground carpet. The vertical extent of the shock waves attached to near-sonic airplanes was also studied. The flights were conducted over the 1500 ft instrumented BREN tower so that vertical surveys through the shock waves were measured. These data on caustic phenomena near the shock wave extremity were analyzed in detail and compared with theoretical results. Amplifications of shock wave strength varied from 2 to 5 during longitudinal accelerations, from 1 to 1.8 during steady threshold Mach number flight, and up to 3 for small inadvertent accelerations during flight near the threshold Mach number.

Haglund, G. T.↗

Laser-induced electric breakdown in solids

A review is given of recent experimental results on laser-induced electric breakdown in transparent optical solid materials. A fundamental breakdown threshold exists characteristic for each material. The threshold is determined by the same physical process as dc breakdown, namely, avalanche ionization. The dependence of the threshold on laser pulse duration and frequency is consistent with this process. The implication of this breakdown mechanism for laser bulk and surface damage to optical components is discussed. It also determines physical properties of self-focused filaments.

Bloembergen, N.↗

The SAS-D nutation control system

A control law is developed for the SAS-D nutation control system. Nutation is removed in a sub-optimal manner with respect to fuel consumed, but attitude errors are minimized. The research performed consist of an investigation of nutation theory and nutation due to energy dissipation, nutation detection analysis, nutation control analysis, and error analysis. The resulting nutation control system uses an accelerometer or rate gyro to sense the nutation angle theta which varies sinusoidally at the nutation frequency omega. The sensed nutation angle is compared with a threshold theta sub tau. If the sensed nutation is greater, a thrust pulse of duration equal to the period of one spin cycle is initiated. Since the threshold theta sub tau is set equal to the amount of nutation that can be removed by one thrust pulse of duration equal to one spin cycle, the spacecraft nutation is reduced to near zero. Error analysis indicates that the nutation sensed, the threshold, the amount of nutation that can be removed during one thrust pulse, and the time duration of one thrust pulse are all sensitive to the spacecraft spin frequency imparted by the Delta rocket. Thus, the nutation control system was designed to be adaptive to the possible variations in imparted spin frequency.

Taylor, J. M.↗

Single-domain grain size limits for metallic iron

The theory of superparamagnetic (SP) threshold calculations and single-domain (SD) to nonuniform spin threshold calculations is considered. The SD upper grain size limit and the SP-to-SD threshold size are calculated. The size and shape criteria for the stable SD behavior of metallic iron have implications for lunar magnetism and the mechanism of iron-silicate fractionation in the solar nebula.

Butler, R. F.↗

Analysis of surface sputtering on a quantum statistical basis

Surface sputtering is explained theoretically by means of a 3-body sputtering mechanism involving the ion and two surface atoms of the solid. By means of quantum-statistical mechanics, a formula for the sputtering ratio S(E) is derived from first principles. The theoretical sputtering rate S(E) was found experimentally to be proportional to the square of the difference between incident ion energy and the threshold energy for sputtering of surface atoms at low ion energies. Extrapolation of the theoretical sputtering formula to larger ion energies indicates that S(E) reaches a saturation value and finally decreases at high ion energies. The theoretical sputtering ratios S(E) for wolfram, tantalum, and molybdenum are compared with the corresponding experimental sputtering curves in the low energy region from threshold sputtering energy to 120 eV above the respective threshold energy. Theory and experiment are shown to be in good agreement.

Wilhelm, H. E.↗

Impact response of graphite-epoxy flat laminates using projectiles that simulate aircraft engine encounters

An investigation of the response of a graphite-epoxy material to foreign object impact was made by impacting spherical projectiles of gelatin, ice, and steel normally on flat panels. The observed damage was classified as transverse (stress wave delamination and cracking), penetrative, or structural (gross failure): the minimum, or threshold, velocity to cause each class of damage was established as a function of projectile characteristics. Steel projectiles had the lowest transverse damage threshold, followed by gelatin and ice. Making use of the threshold velocities and assuming that the normal component of velocity produces the damage in nonnormal impacts, a set of impact angles and velocities was established for each projectile material which would result in damage to composite fan blades. Analysis of the operating parameters of a typical turbine fan blade shows that small steel projectiles are most likely to cause delamination and penetration damage to unprotected graphite-epoxy composite fan blades.

Preston, J. L., Jr.↗

Nuclear-pumped lasing of /He-3/-Xe and /He-3/-Kr

The letter reports direct nuclear pumping of (He-3)-Xe and (He-3)-Kr using the volumetric He-3(n,p)H-3 nuclear reaction. Lasing in (He-3)-Xe was achieved at the 2.027-micron transition of Xe I; lasing in (He-3)-Kr is assumed to have occurred at the 2.52-micron transition of Kr I. Experimental results show that laser output in (He-3)-Xe increases and tends to saturate with increasing pressure, the lasing neutron-flux threshold decreases with decreasing neutron pulse, and maximum output occurs between 0.1% and 0.5% Xe with the total pressure held constant at 400 torr and with an average neutron flux of 6 by 10 to the 15th power per sq cm/sec. It is noted that the (He-3)-Xe laser has the lowest lasing-threshold neutron flux of any He-3 nuclear-pumped laser to date, but the (He-3)-Kr laser has a very high threshold flux. The primary lasing mechanism is believed to be Penning ionization of Xe and Kr followed by collisional radiative recombination and cascading into the upper laser level.

De Young, R. J.↗

Stability of higher-order Bragg interactions in active periodic media

The stability of waves in unbounded, longitudinally periodic media is studied for index and gain coupling. Time-independent periodic media are found to support both stable and absolutely unstable waves. The wave characteristics depend upon average gain or loss, coupling type, and Bragg order. The extended coupled waves equations provide explicit values of threshold, frequency, and temporal growth rate for instabilities at all Bragg resonances through the dispersion relation. Applications to multiharmonic periodicities and complex couplings are briefly discussed with particular note taken of possible reductions of the stability thresholds and removal of threshold degeneracies. Comparisons are made to the longitudinally bounded case of distributed feedback lasers.

Jaggard, D. L.↗

Superbroadening in H2O and D2O by self-focused picosecond pulses from a YAlG:Nd laser

The dielectric-breakdown intensity threshold, the critical power for self-focusing, and the power threshold for the production of spectral superbroadening have been measured in H2O and D2O. For bandwidth-limited pulses of 30 psec duration at 1.06 microns and of 21 psec duration at 0.53 micron, the superbroadening in water always required power levels sufficient for catastrophic self-focusing and intensities equal to the electric breakdown threshold.

Smith, W. L.↗

The stability of an asymmetric rotor in damped supports

A general-purpose method of evaluating the stability of an asymmetric flexible rotor, mounted in symmetric damped bearings, is defined. This method evaluates the complex eigenvalues of the rotor system by solving the equations of motion in a rotating coordinate frame. The application of this method to a rotor mounted in tilting-pad bearings is demonstrated. The observed behavior of a number of different rotor configurations is compared with corresponding predictions of stability. For the configurations predicted to be unstable, a distinct and unnegotiable threshold of instability is encountered. The sharpness of this threshold is emphasized by careful balancing at speeds fractionally below the threshold. In a final configuration predicted to be marginally stable, lightly damped resonant behavior, negotiable by balancing, is encountered in the region of the first critical speed.

Smalley, A. J.↗

H Lyman-alpha emission from photodissociation of H2O

Lyman-alpha fluorescence measurements were used to study the photodissociation of water vapor to produce H(n equals 2) atoms from threshold to 500 A. The experimental threshold of 813.0 A nearly coincides with the thermodynamic limit. Excitation cross sections rise slowly from threshold to a maximum value of (1.55 plus or minus 0.12) x 10 to the -18th sq cm at about 709 A and decrease to a negligible value below 550 A. Structure in the excitation function is attributed to predissociation of Rydberg series converging to the B(overbar)B2 state of H2O(plus).

Mentall, J. E.↗

Flaw growth of 6Al-4V STA titanium in nitrogen tetroxide with low nitric oxide content

The sustained load flow growth characteristics of surface flowed 6Al-4V STA titanium specimens were determined when exposed to nitrogen tetroxide N2O4 having nitric oxide (NO) concentrations of 0.06 to 0.30%. Test temperatures ranged from 70 to 150 F. It was observed that the threshold stress intensity for the titanium decreased abruptly below on NO concentration of 0.18% and also decreased as the temperature increased. The threshold stress intensity was determined to be greater than or equal to 60% of the critical stress intensity for NO concentrations of 0.18 to 0.30% and temperatures of 90 and 120 F. Sustained load tests conducted in N2O4 vapor with a 0.30% NO concentration at 120 F indicated the threshold to be also greater than or equal to 60% of critical.

Bixler, W. D.↗

Evaluating Energy Conversion Efficiency

Devices that convert solar radiation directly into storable chemical or electrical energy, have characteristic energy absorption spectrum; specifically, each of these devices has energy threshold. The conversion efficiency of generalized system that emcompasses all threshold devices is analyzed, resulting in family of curves for devices of various threshold energies operating at different temperatures.

Byvik, C. E.↗

A high speed implementation of the random decrement algorithm

The algorithm is useful for measuring net system damping levels in stochastic processes and for the development of equivalent linearized system response models. The algorithm works by summing together all subrecords which occur after predefined threshold level is crossed. The random decrement signature is normally developed by scanning stored data and adding subrecords together. The high speed implementation of the random decrement algorithm exploits the digital character of sampled data and uses fixed record lengths of 2(n) samples to greatly speed up the process. The contributions to the random decrement signature of each data point was calculated only once and in the same sequence as the data were taken. A hardware implementation of the algorithm using random logic is diagrammed and the process is shown to be limited only by the record size and the threshold crossing frequency of the sampled data. With a hardware cycle time of 200 ns and 1024 point signature, a threshold crossing frequency of 5000 Hertz can be processed and a stably averaged signature presented in real time.

Kiraly, L. J.↗

Evaluation of a voice recognition system for the MOTAS pseudo pilot station function

The Langley Research Center has undertaken a technology development activity to provide a capability, the mission oriented terminal area simulation (MOTAS), wherein terminal area and aircraft systems studies can be performed. An experiment was conducted to evaluate state-of-the-art voice recognition technology and specifically, the Threshold 600 voice recognition system to serve as an aircraft control input device for the MOTAS pseudo pilot station function. The results of the experiment using ten subjects showed a recognition error of 3.67 percent for a 48-word vocabulary tested against a programmed vocabulary of 103 words. After the ten subjects retrained the Threshold 600 system for the words which were misrecognized or rejected, the recognition error decreased to 1.96 percent. The rejection rates for both cases were less than 0.70 percent. Based on the results of the experiment, voice recognition technology and specifically the Threshold 600 voice recognition system were chosen to fulfill this MOTAS function.

Houck, J. A.↗