SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Metals are described by physical appearance followed by atomic weight, atomic number, and valence. Data includes laboratory handling and safety procedures, heat transfer correlations, diffusion coefficients in liquid gallium/indium solution, melting and boiling points, thermal conductivity, heat capacity, and electrical resistivity.
The optimum annealing parameters of time and temperature for producing cell output recovery were established. Devices made from gallium doped and boron doped silicon were investigated. The cells ranged in resistivity from 0.1 to 20 ohm-cm and in thickness from 50 to 250 micrometers. The observations can be explained in a qualitative manner by postulating a pair of competing mechanisms to account for the low temperature reverse annealing seen in most boron and gallium doped silicon solar cells. Still another mechanism dominates at higher temperatures (350 C and greater) to complete this model. One of the mechanisms, defined as B, allows migrators to couple with radiation induced recombination sites thus increasing or enhancing their capture cross sections. This would tend to reduce minority carrier diffusion length. The new recombination complex is postulated to be thermally stable up to temperatures of approximately 350 C.
The Berkeley extreme ultraviolet radiation (EUV) telescope flown on the Apollo Soyuz mission in July, 1975 established the existence of a measurable flux of EUV (100 lambda or = or = 1000 A) originating from sources outside the solar system. White dwarfs, flare stars and cataclysmic variables were dicovered to be relatively intense compact sources of EUV photons. Moreover, this and other subsequent experiments have strongly suggested the presence of a truly diffuse component of the FUV radiation field possibly due to thermal emission from hot interstellar gas located in the general vicinity of the Sun. Closer to the H1, 912 A edge, the effect of a few hot O and B stars has been shown to be very important in establishing the interstellar flux density. All these results imply that the local interstellar medium (ISM) is immersed in a non-negligible EUV radiation field which, because of the strong coupling between EUV photons and matter, will play a crucial role in determining its physical structure. The available information on the local ISM derived from the limited EUV observations carried out so far is assembled and analyzed. These include measurements of the spectra of bright EUV sources that reveal clear evidence of H photo absorption at lambda 400 A and of the He ionization edge at 228 A.
A phenomenological model for the luminosity function of galaxy groups and clusters allows its evolution to be described in terms of the two-point galaxy correlation function. The observable properties of hot gas in virialized groups and clusters at high redshift have been computed. These include the spectral distortion by Comptonization of the cosmic blackbody spectrum, fluctuations in the cosmic microwave background arising by this same process, and the diffuse X-ray background and fluctuations therein arising from thermal emission by the intracluster gas.
Three studies are described characterizing the possible contributions of surface science to tribology. These include surface contamination formed by the interaction of a surface with the environment, contaminants obtained with diffusion of compounds, and surface chemical changes resulting from selective thermal evaporation. Surface analytical tools such as Auger electron spectroscopy (AES) and x ray photoelectron spectroscopy (XPS) incorporated directly into adhesion and friction systems are primarily used to define the nature of tribological surfaces before and after tribological experimentation and to characterize the mechanism of solid-to-solid interaction. Emphasis is on fundamental studies involving the role of surfaces in controlling the adhesion and friction properties of materials emerging as a result of the surface analyses. The materials which were studied include metals and ceramics such as elemental metals, amorphous alloys (metallic glasses), and silicon-based ceramics.
A Monte Carlo code was developed for the simulation of particle acceleration at astrophysical shocks. The code is implemented in Turbo Pascal on a PC. It is modularized and structured in such a way that modification and maintenance are relatively painless. Monte Carlo simulations of particle acceleration at shocks follow the trajectories of individual particles as they scatter repeatedly across the shock front, gaining energy with each crossing. The particles are assumed to scatter from magnetohydrodynamic (MHD) turbulence on both sides of the shock. A scattering law is used which is related to the assumed form of the turbulence, and the particle and shock parameters. High energy cosmic ray spectra derived from Monte Carlo simulations have observed power law behavior just as the spectra derived from analytic calculations based on a diffusion equation. This high energy behavior is not sensitive to the scattering law used. In contrast with Monte Carlo calculations diffusive calculations rely on the initial injection of supra-thermal particles into the shock environment. Monte Carlo simulations are the only known way to describe the extraction of particles directly from the thermal pool. This was the triumph of the Monte Carlo approach. The question of acceleration efficiency is an important one in the shock acceleration game. The efficiency of shock waves efficient to account for the observed flux of high energy galactic cosmic rays was examined. The efficiency of the acceleration process depends on the thermal particle pick-up and hence the low energy scattering in detail. One of the goals is the self-consistent derivation of the accelerated particle spectra and the MHD turbulence spectra. Presumably the upstream turbulence, which scatters the particles so they can be accelerated, is excited by the streaming accelerated particles and the needed downstream turbulence is convected from the upstream region. The present code is to be modified to include a better description of particle scattering (pitch-angle instead of hard-sphere) and as iterative procedure for treating the self-excitation of the MHD turbulence.
The analysis of the Voyager 2 Ultraviolet Spectrometer solar occultation data obtained at Triton is consistent with a spherically symmetric, isothermal thermosphere above 400 km at T(infinity) = 96 K. A detailed calculation of energy loss processes in a pure N2 atmosphere indicates that solar heating, with calculated T(infinity) = 70 K, is insufficient to account for the inferred T(infinity) = 96 K. The magnetosphere must deposit twice as much power as the sun to heat the thermosphere to 96 K and generate the observed N2 tangential column densities above 450 km. The thermal escape of H and N atoms and the downward diffusion of N atoms to recombine below 130 km results in local ionospheric heating efficiency of 24 percent. An upper limit on the tropopause CO mixing ratio of 2 x 10 exp -4 is inferred in the absence of aerosol heating to balance its efficient cooling by LTE rotational line emission.
A simple set of equations is derived for predicting temperature radiative energy flow in a two-region semitransparent laminated layer in the limit of zero heat conduction. The composite is heated on its two sides by unequal amounts of incident radiation. The two layers of the composite have different refractive indices, and each material absorbs, emits, and isotropically scatters radiation. The interfaces are diffuse, and all interface reflections are included. To illustrate the thermal behavior that is readily calculated from the equations, typical results an given for various optical thicknesses and refractive indices of the layers. Internal reflections have a substantial effect on the temperature distribution and radiative heat flow.
We have conducted experiments on the sputtering of water ice by 100 keV Ar(+) between 20 and 150 K. Our findings indicate that the temperature dependence of the total sputtering yield is heavily influenced by the thermal and irradiation history of the ice, showing a complex dependence on irradiation fluence that is correlated to the ejection of O2 molecules. The results suggest that O2 produced by the ions inside the ice diffuses to the surface where it is trapped and then ejected via sputtering or thermal desorption. A high concentration of O2 can trap in a subsurface layer during bombardment at 130 K, which we relate to the formation of hydrogen and its escape from that region. A simple model allows us to determine the depth profile of the absolute concentration of O2 trapped in the ice.
Flaw detection and characterization with thermographic techniques in graphite polymer composites are often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These result in a "noise" floor that increases the difficulty of detecting and characterizing deeper flaws. A method is presented for computationally removing a significant amount of the "noise" from near surface porosity by diffusing the early time response, then subtracting it from subsequent responses. Simulations of the thermal response of a composite are utilized in defining the limitations of the technique. This method for reducing the data is shown to give considerable improvement characterizing both the size and depth of damage. Examples are shown for data acquired on specimens with fabricated delaminations and impact damage.
Abstract In this study, a spectral model for convective transport is coupled to a thermal population model on a two‐dimensional horizontal “microgrid,” covering the typical gridbox size of general circulation models. The goal is to explore new ways of representing impacts of spatial organization in cumulus cloud fields. The thermals are considered the smallest building block of convection, with thermal life cycle and movement represented through binomial functions. Thermals interact through two simple rules, reflecting pulsating growth and environmental deformation. Long‐lived thermal clusters thus form on the microgrid, exhibiting scale growth and spacing that represent simple forms of spatial organization and memory. Size distributions of cluster number are diagnosed from the microgrid through an online clustering algorithm, and provided as input to a spectral multiplume eddy‐diffusivity mass flux scheme. This yields a decentralized transport system, in that the thermal clusters acting as independent but interacting nodes that carry information about spatial structure. The main objectives of this study are (a) to seek proof of concept of this approach, and (b) to gain insight into impacts of spatial organization on convective transport. Single‐column model experiments demonstrate satisfactory skill in reproducing two observed cases of continental shallow convection. Metrics expressing self‐organization and spatial organization match well with large‐eddy simulation results. We find that in this coupled system, spatial organization impacts convective transport primarily through the scale break in the size distribution of cluster number. The rooting of saturated plumes in the subcloud mixed layer plays a key role in this process.
Understanding thermal transport across interfaces which give rise to a thermal resistance (also known as Kapitza resistance) is a critical issue affecting the development of nanotechnologies. Much modern and emergent nanotechnology consist of adjacent materials, and phonon mediated heat transfer governs thermal behavior across internal interfaces in these devices. The physics of thermal transport in solids are governed both by phenomena occurring at the atomic scale and interactions with the material's microstructure. The forecasting of fundamental quantities such as temperature, heat flux and thermal conductivity typically employs the semi-classical Boltzmann transport equation to predict the macroscopic behavior of materials in terms of the microscopic dynamics of its heat carriers. Kapitza resistance was first discovered in liquid helium experiments and has led to a fundamental research thrust in micro and nano-scale heat transport, the behavior of thermal carriers across internal interfaces. Thermal interfacial resistance (TIR) is a widely studied phenomenon, first engaged by Swartz and Pohl through their development of the acoustic and diffuse mismatch methods, then continued through myriad efforts with varying methods and approaches in an attempt to resolve carrier behavior at thermal interfaces. Many of the fundamental approaches to TIR have been at the nanoscale, and research is conducted with molecular dynamics (MD) and density functional theory (DFT) methods. The limitations of these methods is system size; atomistic methods tend to be limited to system sizes of 100,000 atoms or less. Larger length-scale methods have also been pursued, based on the principles of acoustic or diffuse mismatch, but not all include simulation of TIR using a full phonon band spectrum, or temperature dependent methods. Our approach to enabling phonon transport in layered materials draws upon our previous work of demonstrating spectrally coupled phonon transport in homogeneous and heterogeneous materials. We use a semi-analytical approach in which the Bose-Einstein (B-E) statistics set the strength of the phonon radiance in a frequency group, but the B-E statistics are informed with information from the transport system. The B-E statistics in a single frequency group feels the influence of all the groups through the spatial temperature. We also include a new field term which is an indicator of the amount of non-equilibrium behavior of the phonon spectrum---this is added to the phonon source term in all groups to ensure closure and conservation of energy, as the phonon groups in the transport system and the analytical systems are coupled. This work builds upon our previous approach by adding a phonon coupling term at an internal interface, using the principles of the DMM through transmission and reflection coefficients. In this work, the coefficients are determined through computing a common temperature at the interface, influenced by the phonon band structure of both materials, in effect, providing mixing between the two material systems and using the common temperature to set the strength of the phonon radiance at the boundaries on either side of the interface. Our approach uses material properties computed along various crystallographic orientations, and while some isotropy is built into the interface condition, the material properties weight the phonon distributions in the proper crystalline direction. Greater resolution of phonon behavior in proximity to an interface, and more accurate predictions of TIR are obtained. While it is true the assumption of diffuse mismatch can yield inconsistent results compared to experiment especially at low temperatures, this work focuses on room temperature and beyond effects, for future applications in nuclear fuel, or thermoelectric devices; a modified mismatch approach may be feasible if applied properly. Additionally, our methods focus on bridging mesoscale to engineering scale
A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.
Next generation thermal/environmental barrier coatings (TEBC) require carefully balancing various properties including phase stability, thermal conductivity, coefficient of thermal expansion (CTE), mechanical properties, and resistance against hot corrosion and water vapor recession. This work mainly focuses on rapid design of cost-effective high entropy rare-earth disilicates and aluminum garnets to protect SiC-based ceramic matrix composites and nickel-based superalloys in the hot section of gas turbine engines using density functional theory methods. Our calculations identify several low-cost high entropy TEBC exhibiting ultralow thermal conductivity at 1500 K and desirable CTE while maintaining good mechanical properties, including Er1/2Y3/4Yb3/4Si2O7, Gd1/4Er1/4Y3/4Yb3/4Si2O7, Eu1/4Er1/4Y3/4Yb3/4Si2O7, and (Y1/4Gd1/4Er1/4Yb1/4)3Al5O12. This work also aims to gain fundamental understanding of oxygen diffusion in model disilicates. Minimizing oxidizer (such as water vapor and oxygen) permeability through the EBC layer can significantly decrease the growth rate of thermally grown oxide and extend the service life of the coating system. Oxygen diffusion mechanisms including formation energy of defects under varying oxygen conditions and defect migration energy barriers will be presented.
The superior radiation resistance of InP over other solar cell materials such as Si or GaAs has prompted the development of InP cells for space applications. The early research on radiation effects in InP was performed by Yamaguchi and co-workers who showed that, in diffused p-InP junctions, radiation-induced defects were readily annealed both thermally and by injection, which was accompanied by significant cell recovery. More recent research efforts have been made using p-InP grown by metalorganic chemical vapor deposition (MOCVD). While similar deep level transient spectroscopy (DLTS) results were found for radiation induced defects in these cells and in diffused junctions, significant differences existed in the annealing characteristics. After injection annealing at room temperature, Yamaguchi noticed an almost complete recovery of the photovoltaic parameters, while the MOCVD samples showed only minimal annealing. In searching for an explanation of the different annealing behavior of diffused junctions and those grown by MOCVD, several possibilities have been considered. One possibility is the difference in the emitter structure. The diffused junctions have S-doped graded emitters with widths of approximately 0.3 micrometers, while the MOCVD emitters are often doped with Si and have widths of approximately 300A (0.03 micrometers). The difference in the emitter thickness can have important effects, e.g. a larger fraction of the total photocurrent is generated in the n-type material for thicker emitters. Therefore the properties of the n-InP material may explain the difference in the observed overall annealing behavior of the cells.
A quantitative treatment and implications of isothermal and linear heating data on Hg in meteorites are given as a sequel to a more qualitative analysis of meteorite thermal histories (Reed and Jovanovic, 1968). Studies of Hg in terrestrial metamorphic rocks establish that thermal events to which meteorites were subjected fall in the same temperature range, of 400-900 C, as exists during terrestrial metamorphism. Hg diffusion parameters based on data from the linear and isothermal heating experiments are calculated. The conclusions are: (1) Meteorites experienced thermal events of the same magnitude as those measured by primarily mineralogical metamorphic indicators reviewed by Dodd (1969); (2) no correspondence with mineralogical-petrological metamorphic grade is evident; (3) Hg data for some chondrites correlate with shock facies (non-thermal) indicators (Dodd and Jarosewich, 1979); (4) small Hg activation energies (6-14 kcal/mole) require that the meteorites must have been stored in closed systems until low temperatures were attained. Hg must be presented as an involatile mineral(s) or as a substituent in a host phase at temperatures below 100 C. Consistent with this interpretation is the fact that despite diffusion times of 100-1,000,000 years at 200 K, Hg was retained in small objects over cosmic ray exposure periods of a hundred-million years.
Oxide-dispersion-strengthened (ODS) steels have long been viewed as a prime solution for harsh environments. However, conventional manufacturing of ODS steels limits the final product geometry, is difficult to scale up to large components, and is expensive due to multiple highly involved, solid-state processing steps required. Additive manufacturing (AM) can directly incorporate dispersion elements (e.g., Y, Ti and O) during component fabrication, thus bypassing the need for an ODS steel supply chain, the scale-up challenges of powder processing routes, the buoyancy challenges associated with casting ODS steels, and the joining issues for net-shape component fabrication. In the AM process, the diffusion of the dispersion elements in the molten steel plays a key role in the precipitation of the oxide particles, thereby influencing the microstructure, thermal stability and high-temperature mechanical properties of the resulting ODS steels. In this work, the atomic diffusivities of Y, Ti, and O in molten 316L stainless steel (SS) as functions of temperature are determined by ab initio molecular dynamics simulations. The latest Vienna Ab initio Simulation Package (VASP) package that incorporates an on-the-fly machine learning force field for accelerated computation is used. At a constant temperature, the time-dependent coordinates of the target atoms in the molten 316L SS were analyzed in the form of mean square displacement in order to obtain diffusivity. The values of the diffusivity at multiple temperatures are then fitted to the Arrhenius form to determine the activation energy and the pre-exponential factor. Given the challenges in experimental measurement of atomic diffusivity at such high temperatures and correspondingly the lack of experimental data, this study provides important physical parameters for future modeling of the oxide precipitation kinetics during AM process.
In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr 3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr 3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.