Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Resistance switching properties of planner Ag/Li:NiO/Ag structures induced by swift heavy ion irradiation

We report on the resistance switching induced by swift heavy ion (SHI) irradiation in lithium doped nanostructured NiO thin films grown on MgO (100) substrates by chemical solution deposition. Hysteresis in current-voltage curves were observed for the Ag/Li:NiO/Ag planner structures irradiated with 100 MeV Ag{sup +14} ions, whereas pristine samples showed only linear I-V characteristics. No preferential oxygen loss from the film surface has been detected in on-line elastic recoil detection analysis. This suggests that change in the defect density created by SHI irradiation that may contribute to the metallic filaments play a major role as compared to the interfacial oxygen vacancies in resistance switching of NiO.

36 MATERIALS SCIENCE↗

Effect of film texture on magnetization reversal and switching field in continuous and patterned (Co/Pd) multilayers

We studied the reversal properties of perpendicular anisotropy (Co/Pd) multilayers with different crystallographic textures. In case of continuous films, an increase in the coercivity and reduction in the switching field distribution (SFD) were observed as the growth is improved. From magnetic force microscopy, a stripe-type domain configuration was observed in films deposited at low gas pressure while a bubble-type domain was observed in high pressure deposited films. In patterned films, the SFD did not vary significantly for samples with different textures although a 2 kOe increase in the switching field was measured. In patterned structures, the controllability of SFD may not be related to the improvement of film crystallographic growth as was observed for unpatterned films. The results from this study indicate that local variation in the intrinsic film properties plays a major role in the SFD.

36 MATERIALS SCIENCE↗

Interrogating vertically oriented carbon nanofibers with nanomanipulation for nanoelectromechanical switching applications

We have demonstrated electrostatic switching in vertically oriented carbon nanofibers synthesized on refractory metallic nitride substrates, where pull-in voltages V{sub pi} ranged from 10 to 40 V. A nanoprobe was used as the actuating electrode inside a scanning-electron microscope and van der Waals interactions at these length scales appeared significant, suggesting such structures are promising for nonvolatile memory applications. A finite element model was also developed to determine a theoretical V{sub pi} and results were compared to experiment. Nanomanipulation tests also revealed tubes synthesized directly on Si by dc plasma-enhanced chemical-vapor deposition with ammonia and acetylene were electrically unsuitable for dc nanoelectromechanical switching applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A study of resistive switching effects on a thin FeO{sub x} transition layer produced at the oxide/iron interface of TiN/SiO{sub 2}/Fe-contented electrode structures

Large (>10{sup 2}) and stable resistance switching characteristics were demonstrated in TiN/SiO{sub 2}/Fe structure due to the presence of a thin FeO{sub x} transition layer at the SiO{sub 2}/Fe interface, produced spontaneously during the plasma-enhanced tetraethyl orthosilicate oxide deposition process. Addition of Pt into Fe electrode, i.e., a TiN/SiO{sub 2}/Fe{sub 0.73}Pt{sub 0.27} structure, was observed to improve the data dispersion of switching parameters, associating with the decrease in Fe content inside the FeO{sub x} layer. Additionally, current-voltage fitting data shows that current transport mechanism is governed by Ohm's law in low voltage region and Pool-Frenkel behavior in high voltage region, consisting with FeO{sub x} phase transition characteristics.

36 MATERIALS SCIENCE↗

Electro-Optical Switching of Gradient 2D-PDLC Films

A tunable electro-optical switching is reported for single-layered polymer-dispersed liquid crystal (PDLC) films, controlled by the film thickness. Thin planar film of two-dimensional layer of thickness continuously varying from a few micrometers to several tens of micrometers is examined. The wedge-confined PDLC single layer contains E7 liquid-crystal microdroplets dispersed in a transparent polymer matrix of NOA65. The diameters of the droplets with a linear-gradient size distribution along the wedge slope reach several tens of micrometers, defined by the wedge geometry of the film. The electro-optical switching of the single-layered PDLC film is linked to its microstructure and droplet organization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-speed all-optical terahertz polarization switching by a transient plasma phase modulator

We demonstrate high-speed all-optical polarization switching of broadband terahertz frequency electromagnetic fields with subpicosecond switch-on time. This is achieved through the use of a two-plasma configuration in an orthogonal geometry in which one plasma modulates the relative phase of a two-color optical pump field, enabling rapid terahertz polarization modulation at rates limited by the repetition-rate of the control pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Beamline for Fast Polarization Switching at NSLS-II

The first XUV beamline (200-2000 eV) at NSLS-II will have two branches, one optimized for photon hungry experiments requiring high coherent flux and one optimized for studies of polarization sensitive materials and interfaces based on fast polarization switching. We describe here the branch designed for fast polarization switching with frequencies up to 1 kHz, high photon flux, and good energy resolution. The beamline will be served by two canted undulators and is based on the focusing variable line spacing grating monochromator. The two beams will be focused at the same spot of approximately 80x10 {mu}m (hor.xver.). The expected circular polarized flux at the sample from each device up to 1.4 keV will be higher than 10{sup 12} photons/s at a resolving power better than 10{sup 4}. An additional KB focusing system will deliver the two beams to a spot in the {mu}m range.

43 PARTICLE ACCELERATORS↗

In situ transmission electron microscopy analysis of conductive filament during solid electrolyte resistance switching

An in situ transmission electron microscopy (TEM) analysis of a solid electrolyte, Cu-GeS, during resistance switching is reported. Real-time observations of the filament formation and disappearance process were performed in the TEM instrument and the conductive-filament-formation model was confirmed experimentally. Narrow conductive filaments were formed corresponding to resistance switching from high- to low-resistance states. When the resistance changed to high-resistance state, the filament disappeared. It was also confirmed by use of selected area diffractometry and energy-dispersive x-ray spectroscopy that the conductive filament was made of nanocrystals composed mainly of Cu.

36 MATERIALS SCIENCE↗

Origin of magnetic switching field distribution in bit patterned media based on pre-patterned substrates

Using a combination of synchrotron radiation based magnetic imaging and high-resolution transmission electron microscopy we reveal systematic correlations between the magnetic switching field and the internal nanoscale structure of individual islands in bit patterned media fabricated by Co/Pd-multilayer deposition onto pre-patterned substrates. We find that misaligned grains at the island periphery are a common feature independent of the island switching field, while irregular island shapes and misaligned grains specifically extending into the center of an island are systematically correlated with a reduced island reversal field.

36 MATERIALS SCIENCE↗

Spectrographic temperature measurement of a high power breakdown arc in a high pressure gas switch

A procedure for obtaining an approximate temperature value of conducting plasma generated during self-break closure of a RIMFIRE gas switch is described. The plasma is in the form of a breakdown arc which conducts approximately 12 kJ of energy in 1 {mu}s. A spectrographic analysis of the trigger-section of the 6-MV RIMFIRE laser triggered gas switch used in Sandia National Laboratory's ''Z-Machine'' has been made. It is assumed that the breakdown plasma has sufficiently approached local thermodynamic equilibrium allowing a black-body temperature model to be applied. This model allows the plasma temperature and radiated power to be approximated. The gas dielectric used in these tests was pressurized SF{sub 6}. The electrode gap is set at 4.59 cm for each test. The electrode material is stainless steel and insulator material is poly(methyl methacrylate). A spectrum range from 220 to 550 nanometers has been observed and calibrated using two spectral irradiance lamps and three spectrograph gratings. The approximate plasma temperature is reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermodynamic, Raman and electrical switching studies on Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses

We have investigated thermal properties of bulk Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses in detail, through alternating differential scanning calorimetry experiments. The composition dependence of thermal parameters reveal the signatures of rigidity percolation and chemical threshold at compositions x = 12 and x = 19, respectively. The stability and glass forming ability of these glasses have also been determined using the data obtained from different thermodynamic quantities and it is found that the Si{sub 15}Te{sub 85-x}Ag{sub x} glasses in the region 12 {<=} x {<=} 17 are more stable when compared to other glasses of the same series. Further, the blueshift observed in Raman spectroscopy investigations, in the composition range 12 {<=} x {<=} 13, support the occurrence of stiffness threshold in this composition range. All Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses are found to exhibit memory type switching (for sample thickness 0.25 mm) in the input current range 3-9 mA. The effect of rigidity percolation and chemical thresholds on switching voltages are observed at x = 12 and 19, respectively.

36 MATERIALS SCIENCE↗

Switching of bound vector solitons for the coupled nonlinear Schroedinger equations with nonhomogenously stochastic perturbations

We investigate the dynamics of the bound vector solitons (BVSs) for the coupled nonlinear Schroedinger equations with the nonhomogenously stochastic perturbations added on their dispersion terms. Soliton switching (besides soliton breakup) can be observed between the two components of the BVSs. Rate of the maximum switched energy (absolute values) within the fixed propagation distance (about 10 periods of the BVSs) enhances in the sense of statistics when the amplitudes of stochastic perturbations increase. Additionally, it is revealed that the BVSs with enhanced coherence are more robust against the perturbations with nonhomogenous stochasticity. Diagram describing the approximate borders of the splitting and non-splitting areas is also given. Our results might be helpful in dynamics of the BVSs with stochastic noises in nonlinear optical fibers or with stochastic quantum fluctuations in Bose-Einstein condensates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast switching in wetting properties of TiO{sub 2}/YSZ/Si(001) epitaxial heterostructures induced by laser irradiation

We have demonstrated dark hydrophilicity of single crystalline rutile TiO{sub 2}(100) thin films, in which rapid switching from a hydrophobic to a hydrophilic surface was achieved using nanosecond excimer laser irradiation. The TiO{sub 2}/YSZ/Si(001) single crystalline heterostructures were grown by pulsed laser deposition and were subsequently irradiated by a single pulse of a KrF excimer laser at several energies. The wettability of water on the surfaces of the samples was evaluated. The samples were hydrophobic prior to laser annealing and turned hydrophilic after laser annealing. Superhydrophilic surfaces were obtained at higher laser energy densities (e.g., 0.32 J.cm{sup -2}). The stoichiometries of the surface regions of the samples before and after laser annealing were examined using XPS. The results revealed the formation of oxygen vacancies on the surface, which are surmised to be responsible for the observed superhydrophilic behavior. According to the AFM images, surface smoothening was greater in films that were annealed at higher laser energy densities. The samples exhibited hydrophobic behavior after being placed in ambient atmosphere. The origin of laser induced wetting behavior was qualitatively understood to stem from an increase of point defects near the surface, which lowered the film/water interfacial energy. This type of rapid hydrophobic/hydrophilic switching may be used to facilitate fabrication of electronic and photonic devices with novel properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current dependence of spin torque switching rate based on Fokker-Planck approach

The spin torque switching rate of an in-plane magnetized system in the presence of an applied field is derived by solving the Fokker-Planck equation. It is found that three scaling currents are necessary to describe the current dependence of the switching rate in the low-current limit. The dependences of these scaling currents on the applied field strength are also studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive switching properties of Ce and Mn co-doped BiFeO{sub 3} thin films for nonvolatile memory application

The Ce and Mn co-doped BiFeO{sub 3} (BCFMO) thin films were synthesized on Pt/Ti/SiO{sub 2}/Si substrates using a sol-gel method. The unipolar resistive switching (URS) and bipolar resistive switching (BRS) behaviors were observed in the Pt/BCFMO/Pt device structure, which was attributed to the formation/rupture of metal filaments. The fabricated device exhibits a large R{sub OFF}/R{sub ON} ratio (>80), long retention time (>10{sup 5} s) and low programming voltages (<1.5 V). Analysis of linear fitting current-voltage curves suggests that the space charge limited leakage current (SCLC) and Schottky emission were observed as the conduction mechanisms of the devices.

36 MATERIALS SCIENCE↗

Magnetic manipulation by resistance switching in CeO{sub 2}/PrBa{sub 2}Cu{sub 3}O{sub 7−δ}/Pt heterostructure: The role of oxygen vacancies

Pronounced bipolar resistance switching with a good retention property has been observed in CeO{sub 2}/PrBa{sub 2}Cu{sub 3}O{sub 7−δ}/Pt heterostructure. The low resistance state and high resistance state exhibited distinguished ferromagnetic signals, as compared to the nearly non-magnetic initial state. It is found that the migration of the oxygen vacancies under electric field is mainly responsible for the electric and the magnetic changes. The modified interfacial electronic structure by the oxygen vacancy migration and the trapping/detrapping of the carriers leads to the resistance switching. The exchange interaction of the hydrogen-like orbitals formed around the singly occupied oxygen vacancies in CeO{sub 2} is accounting for the emerged and modulated ferromagnetic signals. Temperature dependence of resistance in the low resistance state follows a variable range hopping law, further confirming that the amount of oxygen vacancies in the CeO{sub 2} layer directly affects the hydrogen-like orbital radius, which determines the strength of the ferromagnetic coupling.

36 MATERIALS SCIENCE↗

Spin-orbit torque magnetization switching of a three-terminal perpendicular magnetic tunnel junction

We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and its read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density 5 × 10{sup 11} A/m{sup 2} in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof of concept of a perpendicular spin-orbit torque magnetic memory cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of attendant phenomena of bipolar resistive switching and negative differential resistance in SrTiO{sub 3}:Nb/ZnO heterojunctions

Epitaxial ZnO thin films were grown on SrTiO{sub 3}:Nb (NSTO) substrates by pulsed laser deposition. The NSTO/ZnO heterojunctions exhibit a typical rectification characteristic under a small voltage, while two attendant behaviors of bipolar resistive switching and negative differential resistance appear under a large voltage. The NSTO/ZnO heterojunctions show extremely weak resistance switching hysteresis without applying a forward bias. However, when the forward bias increases to some extent, the hysteresis becomes more and more prominent and negative differential resistance gradually appears. Furthermore, the high resistance state is obtained when sweeping from negative to positive voltage bias, and vice versa. We propose a model for these behaviors at NSTO/ZnO interface, in which the space charge region in ZnO is wide in high resistance state when the interface state is unoccupied, while the space charge region becomes narrower in low resistance state due to Fermi pinning when the interface state is completely occupied, and the low resistance state is remained until electrons are detrapped from the interface state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗