Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solutions center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Analytical Investigation of Propellant Slosh Stability Boundary on a Space Vehicle

The effect of propellant sloshing upon the stability of a liquid-propelled space vehicle has been studied extensively. For a typical space vehicle with thrust vector control and a single slosh tank, the slosh danger zone is located between the vehicle center of mass and the center of percussion. If the slosh mass is located between these two locations, baffles may be required to provide additional damping for stability. In this work, the methodology behind the classic single tank solution analytical is extended to a tandem tank configuration where the tanks are located along the vehicle centerline or symmetrically offset from the centerline. Secondly, the slosh stability boundary for a vehicle with pairs of outboard reaction jets, rather than thrust vectoring, for attitude control is studied. Finally, the impact of aerodynamics and vehicle axial acceleration on the classic danger zone solution are analyzed.

Jing Pei↗
NASA NTRS2021

Experimental Flight Validation of the Prandtl 1933 Bell Spanload

This report describes the validation of the 1933 Prandtl bell spanload. This spanload is the minimum induced drag of a wing for a given structural weight with properties that eliminate adverse yaw. Aircraft using the Prandtl bell spanload were flown and investigated. The results of this research show that many previously held assumptions should be rethought, and the creation of aircraft using the Prandtl bell spanload will require considerable new techniques. Part of this work centered on the use of inverse methods. The usual first-step approach to a computational fluids problem is to create a geometry of the aircraft. Once this geometry exists, the computational fluids solution has been solved; however, the problem of creating the geometry still exists. A very small segment of the computational fluids world has concentrated on inverse solutions. This design approach begins with an end result - the computational fluids solution; from this end result, the geometry is sought. A more generic inverse tool was desired that would allow for the design of wings - specifically Prandtl bell spanload wings. Such a tool has been developed and allows for variable taper, aspect ratio, sweep, airfoils, and design-lift coefficients; output from the tool results in twist distribution of wings.

Albion H. Bowers↗
DOE OSTI2024

A Simulation Modeling Approach to Optimizing Nuclear Waste Dispositioning

The dispositioning of nuclear waste generated at facilities across the country is an ongoing battle that affects us all. National laboratories and research centers dealing in medical research, clean energy, and other nuclear activities such as the Department of Energy (DOE) facilities face the need to properly manage and dispose of nuclear waste. A dynamic modeling solution would enable the DOE and others to make decisions on waste disposal and technological options. In doing so, this research explores modeling techniques using available data to address these situations. The focus being on developing an initial robust and adaptable discrete event model using the ExtendSim tool. This modeling effort will target the dispositioning of transuranic waste at the Savannah River National Laboratory (SRNL) which can be expanded to represent the current state of disposition process for waste generated at other DOE facilities. The model aims to assess resource allocation and waste processing options to stabilize productivity and cut the backlog of nuclear waste. By assessing the results of different scenarios, this research aims to provide actionable insights for the DOE. This approach has the potential to significantly improve the management of radioactive waste, offering the capability of evaluating options for optimizing the process for nuclear waste disposal. The findings of this study can serve as a valuable resource for decision-makers and other national laboratories, or research entities engaged in nuclear operations by enabling them to make more informed choices.

Andaverde, Alexis↗
NASA NTRSDate not supplied

WMLES for the Fifth High-Lift PredictionWorkshop Cases Using FUN3D

This paper presents solution assessments and grid convergence studies for the test cases outlined in the Fifth High-Lift Prediction Workshop (HLPW-5), focusing on the high-lift Common Research Models (CRM-HL). The study utilizes a wall-modeled large-eddy simulation (WMLES) methodology developed in the unstructured-grid, node-centered flow solver FUN3D. The second-order accurate simulations conducted in this study utilize a finite-volume spatial discretization and an implicit temporal scheme. Large-scale turbulent features are resolved away from the wall, with small-scale effects captured by the Vreman subgrid-scale model. An equilibrium wall function uses the first grid point off the wall serving as the critical interface between the wall model and the large-eddy simulation region, thus requiring careful placement in grid design. WMLES solutions are assessed for HLPW-5 cases, including a clean wing-body configuration and geometry-buildup configurations corresponding to the 5.1\% ONERA CRM-HL model. Grid-convergence studies are systematically conducted using uniformly refined grids. Moreover, simulation results and grid sensitivity are presented for the NASA 5.2\% CRM-HL configuration at both moderate and flight-scale Reynolds numbers. Overall, WMLES results are satisfactory and agree well with available experimental data, especially on sufficiently fine grids.

high-lift aerodynamics↗
NASA NTRS1995

Gamma-ray transfer and energy deposition in supernovae

Solutions to the energy-independent (gray) radiative transfer equations are compared to results of Monte Carlo simulations of the Ni-56 and Co-56 decay gamma-ray energy deposition in supernovae. The comparison shows that an effective, purely absorptive, gray opacity, kappa(sub gamma) approximately (0. 06 +/- 0.01)Y(sub e) sq cm/g, where Y is the total number of electrons per baryon, accurately describes the interaction of gamma-rays with the cool supernova gas and the local gamma-ray energy deposition within the gas. The nature of the gamma-ray interaction process (dominated by Compton scattering in the relativistic regime) creates a weak dependence of kappa(sub gamma) on the optical thickness of the (spherically symmetric) supernova atmosphere: The maximum value of kappa(sub gamma) applies during optically thick conditions when individual gamma-rays undergo multiple scattering encounters and the lower bound is reached at the phase characterized by a total Thomson optical depth to the center of the atmosphere tau(sub e) approximately less than 1. Gamma-ray deposition for Type Ia supernova models to within 10% for the epoch from maximum light to t = 1200 days. Our results quantitatively confirm that the quick and efficient solution to the gray transfer problem provides an accurate representation of gamma-ray energy deposition for a broad range of supernova conditions.

Swartz, Douglas A.↗
DOE OSTI2026

Surface-Initiated Atom Transfer Radical Polymerization Using Hydrogel Reactors

Atom transfer radical polymerization (ATRP) is a controlled radical polymerization method that enables the synthesis of tailored polymeric materials with low dispersity, highlighting its immense potential for green fabrication of advanced materials. However, its broader implementation is limited by challenges in product isolation, maintaining catalyst activity, and mitigating atmospheric sensitivity arising from oxygen-sensitive metal catalysts. Here, gelatin hydrogels (GHs) are introduced as a soft “reactor” matrix for interfacial ATRP, operating with minimal metal-catalyst loading while exhibiting possibly an organoreductive behavior. This strategy leverages activator regeneration via electron transfer through a ligand–metal charge-transfer (LMCT) mechanism to reduce oxidized metal catalysts within the GH network. Polymerization is evaluated by growing polymer brushes at an active interface formed between GHs swollen in monomer solution and an initiating surface, and sequential growth experiments confirmed that GH-mediated ATRP preserves living character. Under UV illumination, LMCT is activated, producing polymers both at the desired interface and within the GH bulk. UV–Vis spectroscopy revealed active reduction of Cu(II) to Cu(I) along with concentration-dependent complex formation, indicating dynamic coordination chemistry within the hydrogel. The redox-active arginine- and glutamic acid-rich gelatin backbone coordinates and reduces the metal center, enabling ATRP at ppm-level catalyst concentrations. While polymerization proceeds in GH-Cu(II) reactors, adding external mobile ligands to the GH results in longer polymer brushes. Here, the results reported here are exploratory. More experiments are needed to characterize polymer brush growth in GHs and compare it to conventional surface-initiated polymerization in solution.

Absorption↗
NASA NTRS2002

Graphite Ablation and Thermal Response Simulation Under Arc-Jet Flow Conditions

The Two-dimensional Implicit Thermal Response and Ablation program, TITAN, was developed and integrated with a Navier-Stokes solver, GIANTS, for multidimensional ablation and shape change simulation of thermal protection systems in hypersonic flow environments. The governing equations in both codes are demoralized using the same finite-volume approximation with a general body-fitted coordinate system. Time-dependent solutions are achieved by an implicit time marching technique using Gauess-Siedel line relaxation with alternating sweeps. As the first part of a code validation study, this paper compares TITAN-GIANTS predictions with thermal response and recession data obtained from arc-jet tests recently conducted in the Interaction Heating Facility (IHF) at NASA Ames Research Center. The test models are graphite sphere-cones. Graphite was selected as a test material to minimize the uncertainties from material properties. Recession and thermal response data were obtained from two separate arc-jet test series. The first series was at a heat flux where graphite ablation is mainly due to sublimation, and the second series was at a relatively low heat flux where recession is the result of diffusion-controlled oxidation. Ablation and thermal response solutions for both sets of conditions, as calculated by TITAN-GIANTS, are presented and discussed in detail. Predicted shape change and temperature histories generally agree well with the data obtained from the arc-jet tests.

Chen, Y.-K.↗
DOE OSTI2025

The Future of a Myriad of Accelerated Biodiscoveries Lies in AI‐Powered Mass Spectrometry and Multiomics Integration

The intersection of modern artificial intelligence (AI) and mass spectrometry (MS) is set to transform the MS‐based “omics” research fields, particularly proteomics, metabolomics, lipidomics, and glycomics, enabling advancements across a wide range of domains, from health to environment and industrial biotechnology. Beginning with an overview of key challenges inherent in MS software pipelines, this personal perspective explores how AI‐driven solutions can address them to enhance data processing, integration and interpretation. It proposes a paradigm shift in molecular identification and quantitation algorithms, leveraging AI to enable holistic interpretation of MS‐based multiomics data. While centered on MS‐based omics, this holistic AI‐driven paradigm is also critical for connecting dynamic biochemical changes to genomics and transcriptomics contexts, reinforcing the integrative value of MS in multiomics research. Ultimately, this AI‐driven approach could enhance efficiency, accuracy, and molecular breadth of coverage, deepening our systems‐level understanding of biological processes and accelerating a myriad of biodiscoveries.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Shear-free mixing to achieve accurate temporospatial nanoscale kinetics through scanning-SAXS: ion-induced phase transition of dispersed cellulose nanocrystals

Time-resolved in situ characterization of well-defined mixing processes using small-angle X-ray scattering (SAXS) is usually challenging, especially if the process involves changes of material viscoelasticity. In specific, it can be difficult to create a continuous mixing experiment without shearing the material of interest; a desirable situation since shear flow both affects nanoscale structures and flow stability as well as resulting in unreliable time-resolved data. Here, we demonstrate a flow-focusing mixing device for in situ nanostructural characterization using scanning-SAXS. Given the interfacial tension and viscosity ratio between core and sheath fluids, the core material confined by sheath flows is completely detached from the walls and forms a zero-shear plug flow at the channel center, allowing for a trivial conversion of spatial coordinates to mixing times. With this technique, the time-resolved gel formation of dispersed cellulose nanocrystals (CNCs) was studied by mixing with a sodium chloride solution. It is observed how locally ordered regions, so called tactoids, are disrupted when the added monovalent ions affect the electrostatic interactions, which in turn leads to a loss of CNC alignment through enhanced rotary diffusion. The demonstrated flow-focusing scanning-SAXS technique can be used to unveil important kinetics during structural formation of nanocellulosic materials. However, the same technique is also applicable in many soft matter systems to provide new insights into the nanoscale dynamics during mixing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessment of vertical stability for negative triangularity pilot plants

Abstract Negative triangularity (NT) tokamak configurations may be more susceptible to magneto-hydrodynamic instability, posing challenges for recent reactor designs centered around their favorable properties, such as improved confinement and operation free of edge-localized modes. In this work, we assess the vertical stability of plasmas with NT shaping and develop potential reactor solutions. When coupled with a conformal wall, NT equilibria are confirmed to be less vertically stable than equivalent positive triangularity (PT) configurations. Unlike PT, their vertical stability is degraded at higher poloidal beta. Furthermore, improvements in vertical stability at low aspect ratio do not translate to the NT geometry. NT equilibria are stabilized in PT vacuum vessels due to the increased proximity of the plasma and the wall on the outboard side, but this scenario is found to be undesirable due to reduced vertical gaps which give less spatial margin for control recovery. Instead, we demonstrate that informed positioning of passively conducting plates can lead to improved vertical stability in NT configurations on par with stability metrics expected in PT scenarios. An optimal setup for passive plates in highly elongated NT devices is presented, where plates on the outboard side of the device reduce vertical instability growth rates to 16% of their baseline value. For lower target elongations, integration of passive stabilizers with divertor concepts can lead to significant improvements in vertical stability. Plates on the inboard side of the device are also uniquely enabled in NT geometries, providing opportunity for spatial separation of vertical stability coils and passive stabilizers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Materials and Fuels Complex Five-Year Investment Strategy (FY2020-FY2024)

The Department of Energy Office of Nuclear Energy (DOE-NE) mission is to provide the research, development, and demonstration (RD&D) foundation to extend the lives of the current operating reactor fleet, develop the next generation of nuclear reactors, and provide integrated nuclear fuel cycle solutions. The Materials and Fuels Complex (MFC) serves as the foundation of a nuclear RD&D enabling test bed at Idaho National Laboratory (INL) and is an integral part of a National Reactor Innovation Center (NRIC) strategy. MFC facilities focus on developing and maintaining RD&D capabilities that can increase research throughput, reduce barriers to deployment, and facilitate commercialization of new ideas and technologies for clean and secure sources of energy. This document is a complimentary document to the Materials and Fuels Complex Five-Year Mission Strategy FY-20 – FY-24 (INL/EXT-20-57224) that defines specific implementation strategies for increasing research capability and throughput through targeted investments in research facilities, research instruments, and research staff. Refer to INL/EXT-20-57224 for details about MFC, its capabilities, and the overall mission strategy for the Materials and Fuels Complex.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Numerical Investigation of Fluid Flow and Space Charge in Liquid Argon Time Projection Chamber (LArTPC) Detectors

Overview This project focused on developing a high-fidelity numerical framework to simulate the multiphysics environment within Liquid Argon Time Projection Chamber (LArTPC) detectors. The primary objective was to characterize the complex interplay between ion transport, background fluid dynamics, and electric field distortions—a critical factor for the calibration and sensitivity of next-generation High Energy Physics experiments, such as DUNE. Technical Achievements The research successfully yielded a hybrid numerical space-charge solver utilizing a Cell-Centered Finite Volume Method (FVM) for ion transport coupled with a Finite Element Method (FEM) for electric potential. Key accomplishments include: • Verification & Validation: The 3-D solver was rigorously verified against 1-D analytical solutions, demonstrating high numerical accuracy in predicting space-charge-induced field deviations. • Field Distortion Analysis: 3D simulations revealed that space charge effects introduce significant non-uniformities in the electric field. Critically, the research identified that background LAr flow velocities, when comparable to ion drift velocities, markedly exacerbate these distortions. • Technology Transfer: The resulting source code and comprehensive user manuals were successfully transferred to collaborators at Fermilab, providing a portable computational tool for the broader scientific community. Challenges and Future Directions While the space-charge solver achieved all performance metrics, the integrated fluid dynamics modeling encountered convergence challenges stemming from the extreme 200-fold disparity in length scales between the detector's 37 mm inlet pipes and the 8-meter global domain. To address this, the project has identified a clear technical pivot toward Hierarchical Geometric Adaptive Mesh Refinement (HG-AMR). By implementing an h-type refinement strategy with hanging nodes, future iterations of this solver will be capable of resolving localized high-gradient inlet flows without the prohibitive computational costs of regular grids. This advancement, combined with data-driven uncertainty quantification based on MicroBooNE-style calibration, will enable the precise modeling of detector responses in large-scale cryogenic environments where direct measurement remains difficult. Impact The computational tools developed under this award provide a foundation for enhancing the energy resolution and spatial reconstruction of noble liquid detectors. By bridging the gap between theoretical fluid dynamics and experimental field calibration, this work supports the DOE’s mission to advance the frontiers of neutrino physics and dark matter detection.

42 ENGINEERING↗
DOE OSTI2021

BVR{sub c}I{sub c} Observations, Third-body Orbital Study, and Analysis of the UV Leo-type, Pre-W UMA Binary V642 Virginis

V642 Vir is a polar spotted, well-detached, UV Leo-type, low-mass, pre-WUMa (T1 ~ 4250K, ~K6V) eclipsing binary. It was observed in 2020 April, May, and June at the Dark Sky Observatory in North Carolina, USA with the 0.81 m reflector of Appalachian State University. A total of 88 timings were used in our 22-year period study which included 12 Transiting Exoplanet Survey Satellite (TESS) timings. The O - C plots show a low-amplitude oscillation of residuals that points to the existence of an orbiting third body, a dwarf of minimum mass, 0.15 M {sub ⊙} in an eccentric orbit (e = 0.41), with an orbital period of 20.07 yr. The odd light curves of V642 Virginis indicate that it has polar spots similar to UV Leo and the recently published V1023 Per. Its present large polar spot region indicates that it must have a strong magnetic field and that it is synchronously rotating. The BVR{sub c}I{sub c} simultaneous Wilson–Devinney Program solution gives a detached binary (primary and secondary components are underfilling their respective Roche Lobes, with 76% and 78% fill outs respectively). The cool spot region models near the pole of the primary component (centered at 10° colatitude) and is angled toward the secondary component. Its large radius (68°) and T-fact (T{sub spot}/T{sub surface} = 0.69) also attest to the conclusion of the strength of the magnetic field. The small ΔT in the components (~318 K) and mass ratio near unity (0.9542 ± 0.0005) show that the stars are similar in spectral type (secondary ~K9V). The inclination is high, ~86.87 ± 0.04°, yet there is no time of constant light due to the two stars’ essentially equal radii.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1962

The Restricted Three-Body-Problem as a Perturbation of Euler's Problem of Two Fixed Centers and Its Application to Lunar Trajectories

The restricted Three-Body-Problem considers the motion of an infinitesimal mass under the gravitational attraction of two finite masses, which revolve about their common center of gravity in coplanar circles. It is well known that Euler's problem of two fixed centers, consisting of the motion of an infinitesimal mass under the gravitational attraction of two finite masses fixed in space, can be solved by elliptic functions. The idea presented here is to take the solution of Euler's problem as the solution of the restricted Three-Body-Problem by allowing the initial values to be functions of time now. Differential equations for the perturbed initial values are established. These equations can be given in closed form by using the fact that the transformation to the perturbed initial values of Euler's problem is canonical. Thus, an approximation can be obtained for the solution of the restricted Three-Body-Problem. The method can also be used to represent classes of neighboring trajectories for guidance purposes.

Euler equation↗
NASA NTRS1977

Radiative transfer in dusty nebulae

The effects of dust scattering on observable optical and infrared parameters, and the accuracy of approximate solutions were examined. The equation of radiative transfer in a static and homogeneous, but not necessarily uniform, distribution gas and dust around a central empty core with a point source of energy at its center was solved. The dust properties were characterized by a phenomenological extinction cross section, albedo and parameters describing the anisotropy of dust scattering. For ultraviolet photons, ionization equilibrium equations for the gas were solved, and for infrared photons a self-consistent dust temperature was calculated. Ray tracing was used to solve for the angular dependence of the intensity.

Dana, R. A.↗
NASA NTRS1983

Expansion of the solar wind from a two-hole corona

A one-fluid model is employed to study the global expansion of the solar wind from a two-hole corona, under the assumptions that the holes are confined to polar caps within 30 deg of heliographic colatitude, the flow is steady and axisymmetric, and the geometry of streamlines is prescribed. The boundary conditions are adjusted in such a way that the calculated solar-wind properties at 1 AU are in reasonable agreement with observational results. A series of numerical solutions are obtained, the series produces a maximum terminal speed of 829 km/s at the pole. The calculated solar-wind speeds are strongly latitude-dependent and are positively correlated with local divergence factor of a stream tube. The solutions imply that most plasma properties are highly inhomogeneous at the polar caps. The flow velocity, the temperature, the proton-number flux and the conduction-heat flux all increase towards the hole center.

Whang, Y. C.↗
NASA NTRS1993

Solving modal equations of motion with initial conditions using MSC/NASTRAN DMAP. Part 1: Implementing exact mode superposition

Within the MSC/NASTRAN DMAP (Direct Matrix Abstraction Program) module TRD1, solving physical (coupled) or modal (uncoupled) transient equations of motion is performed using the Newmark-Beta or mode superposition algorithms, respectively. For equations of motion with initial conditions, only the Newmark-Beta integration routine has been available in MSC/NASTRAN solution sequences for solving physical systems and in custom DMAP sequences or alters for solving modal systems. In some cases, one difficulty with using the Newmark-Beta method is that the process of selecting suitable integration time steps for obtaining acceptable results is lengthy. In addition, when very small step sizes are required, a large amount of time can be spent integrating the equations of motion. For certain aerospace applications, a significant time savings can be realized when the equations of motion are solved using an exact integration routine instead of the Newmark-Beta numerical algorithm. In order to solve modal equations of motion with initial conditions and take advantage of efficiencies gained when using uncoupled solution algorithms (like that within TRD1), an exact mode superposition method using MSC/NASTRAN DMAP has been developed and successfully implemented as an enhancement to an existing coupled loads methodology at the NASA Lewis Research Center.

Abdallah, Ayman A.↗
NASA NTRS1998

The Application of Dedicated Controllers to Parallel/Serial Exhauster Trains

Twenty new dedicated controllers were interfaced to the Distributed Control System (DCS) at NASA Lewis Research Center. Better surge avoidance, improved energy savings, interface intricacies, and plant complexities are the subjects of this paper. Problems with the existing Programmable Logic Controller (PLC) control logic are described as well as the solutions implemented with the new controllers. The complexity of the new communication network between the dedicated controllers, Multipurpose Micro-Processor (MMPs), and the operator workstations are illustrated. The complicated nature of the plant and methods of controlling the associated processes are also discussed.

Sadhukhan, Debashis↗