Coordination Chemistry Study of Hydrated and Solvated Lead(II) Ions in Solution and Solid State
Abstract Not Provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract Not Provided
A family of polyoxometalates with the composition [H2V3M17O62](6-) features a Dawson-like architecture containing two tetrahedral {l_brace}VVO4{r_brace} templates rather than main group hetero-anions ({l_brace}PO4{r_brace} or {l_brace}SO4{r_brace} etc.) typically associated with classical heteropolyacids, situated within a mixed-metal {l_brace}MVI17VIVO54{r_brace} cage and these clusters were first discovered using mass spectrometry.
The high energy density and excellent cycle performance of lithium ion batteries makes them superior to all other secondary batteries and explains why they are widely used in portable devices. However, because organic liquid electrolytes have a higher operating voltage than aqueous solution, they are used in lithium ion batteries. This comes with the risk of fire due to their flammability. Solid electrolytes are being investigated to find an alternative to organic liquid. However, the nature of the solid-solid point contact at the interface between the electrolyte and electrode or between the electrolyte grains is such that high power density has proven difficult to attain. We develop a new method for the fabrication of a solid electrolyte using LiBH{sub 4,} known for its super Li{sup +} ion conduction without any grain boundary contribution. The modifications to the conduction pathway achieved by stabilizing the high pressure form of this material provided a new structure with some LiBH{sub 4}, more suitable to the high rate condition. We synthesized the H.P. form of LiBH{sub 4} under ambient pressure by doping LiBH{sub 4} with the KI lattice by sintering. The formation of a KI - LiBH{sub 4} solid solution was confirmed both macroscopically and microscopically. The obtained sample was shown to be a pure Li{sup +} conductor despite its small Li{sup +} content. This conduction mechanism, where the light doping cation played a major role in ion conduction, was termed the “Parasitic Conduction Mechanism.” This mechanism made it possible to synthesize a new ion conductor and is expected to have enormous potential in the search for new battery materials.
Highlights: • APT measurement of Al/Cu alloy is simulated with a combined electrostatics and molecular dynamics (MD) approach. • Results show segregation of dilute Cu at [111] poles in correspondence to experimental measurements. • No temperature is involved. The effect originates in both disparate evaporation field and bond-energies in the alloy. While thermal or field-induced surface migration has been invoked often in past literature to rationalize the experimental observations of solute and impurity atoms segregation to specific poles and zones lines in atom probe tomography (APT) reconstructions, it does not satisfactorily explain all experimental results. Using a combined finite-element and molecular dynamics simulation approach that models the field evaporation process from mechanically relaxed emitter structures, we show that an additional mechanism, athermal relaxation, can also drive significant solute migration. The mechanism is illustrated for Cu in solid solution in Al, which exhibits segregation of Cu to 111 poles and along [110] zone lines in reconstructed APT data. The higher bonding energy of Cu atoms on the surface, confirmed using density-functional theory calculations, causes longer retention on the surface and preferential evaporation of neighboring Al atoms with subsequent athermal relaxation of Cu into higher-neighbor-count sites left vacant by evaporating Al neighbors. This in turn results in barrier-free long-range migration of the Cu atoms by a series of relaxation events that follow the receding terrace ledges towards high-neighbor count poles and zone lines. This mechanism fundamentally limits spatial resolution in the limit of zero temperature.
Ground chips of as-cast Al-10 wt.% Zr alloy were subjected to mechanical alloying (MA) with 5 vol.% of nanodiamond addition in a high energy planetary ball-mill. The aim of this work was to investigate the microstructure, phase transformation and mechanical properties of the material both after MA and after subsequent annealing. Optical and transmission electron microscopes were used for morphological and microstructural analysis. The effect of milling time on powder microhardness, Al lattice parameter, lattice microstrain and crystallite size was determined. It was shown that mechanical alloying of as-cast Al-10wt.%Zr alloy during 20 h leads to a complete dissolution of the primary tetragonal Al{sub 3}Zr crystals in aluminum. At the same time, the powder microhardness increases to 370 HV. Metastable cubic Al{sub 3}Zr phase nanoparticles precipitate from the Al solution due to its decomposition after annealing, however, the Al solid solution remains supersaturated and nanocrystalline. Compression tests at room temperature and at 300 °C showed that the strength values of the hot-pressed samples reach 822 MPa and 344 MPa, respectively. - Highlights: •As-cast Al-10 wt.% Zr alloy was mechanically alloyed with 5 vol.% nanodiamond. •The primary tetragonal Al{sub 3}Zr crystals were completely dissolved in Al after 20 h. •Cubic Al{sub 3}Zr phase nanoparticles precipitated from Al solution after aging. •The aged bulk material showed a high strength at room and elevated temperatures.
Not Available
The investigation of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system is carried out using solid-state routes. This investigation allows to confirm the existence of four compounds with structure related to the Na-based homologous. A new form of AgNb{sub 3}O{sub 8} is evidenced and its structure is determined on the basis of single-crystal X-ray diffraction investigations. This compound crystallizes in the orthorhombic system (SG Pbam) with cell parameters a=12.453(4) A; b=12.416(1) A; c=3.9700(4) A. It presents a TTB type host network in which triangular tunnels remain empty, square ones are fully filled with Ag{sup +} and pentagonal ones show mixed occupancy with Ag{sup +} and [NbO]{sup 3+} entities. Crystal-chemistry investigations show that despite a complex and more or less disordered structure, no evidence for solid solution domain is observed. - Graphical abstract: The investigation via conventional solid-state route allows to settle the different compounds of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system. The structure of a new form of AgNb{sub 3}O{sub 8} is detailed. It is related to the TTB type network with a specific mixed Ag/Nb occupancy of pentagonal tunnel driving to possible but not observed ordering.
It is established that intercrystallite corrosion of cutting-ceramic inserts arises when the chromium content in the peripheral zone of the grains is depleted by the deposition of chromium carbides at the grain boundaries, in the presence of stress due to the fast cooling of the inserts from high temperatures. This is especially apparent when 12Kh18N10Т, 40Kh13, 14Kh17N2, and other steels that are hard to machine are worked by a tool equipped with inserts of VOK-60M modified cutting ceramic. Research shows that the intercrystallite corrosion of cutting-ceramic inserts may be attributed to the stress arising in the surface layers of the grains as a result of carbide or nitride deposition. Heating cutting-ceramic inserts at 650–800°С lowers this stress and restores their resistance to intercrystallite corrosion. Research also shows that chromomanganese cutting-ceramic inserts are less susceptible to intercrystallite corrosion than are chromium–manganese–nickel inserts, while chromium–manganese–nickel cutting-ceramic inserts are less susceptible than are chromonickel inserts. The benefits of chromium–manganese–nickel cutting-ceramic inserts are especially pronounced with relatively brief machining of 12Kh18N10Т, 40Kh13, 14Kh17N2, and other such steels, in rigorous conditions, with a temperature of 600–650°С in the workpiece–tool contact zone. A new theory of the intercrystallite corrosion of VOK-60M modified cutting ceramic is based on the role of the kinetic factor at the relatively low tempering temperatures associated with the deposition of metastable carbide, although this does not lead to maximum change in free energy of the system but only to a relative change. In the cutting ceramic, this carbide may be chromium carbide (Cr, Тi){sub 23}C{sub 6}, which is greatly enriched with titanium. With increase in tempering temperature, the deposited carbide tends toward the stable composition Cr{sub 23}С{sub 6}. Prolonged holding at the tempering temperature also tends to favor thermodynamic equilibrium. In other word, the chromium carbide is gradually enriched to reach the stable composition Cr{sub 23}С{sub 6}. This process is more rapid at higher temperatures. Obviously, the variation in composition of the carbide deposited at the grain boundaries in VOK-60M cutting ceramic with change in temperature and holding time will affect the kinetics of electrochemical solution of the system consisting of the carbide in contact with a solid solution. Research shows that vacuum sintering and annealing markedly improve the thermal stability. For the cutting ceramic, this is explained not only by the removal of fusible impurities but also by the larger quantity of aluminum and other alloying elements that remain in the strengthening phase, rather than being bound in oxides. Sintering in vacuum ensures greater plasticity of cutting ceramic based on nickel and cobalt in cutting 12Kh18N10Т and 14Kh17N2 steel at high speeds, with high temperatures in the machining zone. In addition, on sintering in vacuum furnaces, the content of small nonmetallic inclusions in the basic structure is 5–7 times less than in regular cutting ceramic. That significantly improves the deformability of the ceramic inserts.
Here, we present a systematic study of Re solute transport energetics in W using density functional theory calculations. The study focuses on substitutional solute diffusion in the presence of dislocation strain fields as a first step toward capturing the essential physics of solid solution hardening/softening in W–Re alloys. We calculate the heat of solution, the vacancy formation energy and the solute migration energy as functions of both hydrostatic and shear strains. Our results show that the vacancy formation energy scales with hydrostatic deformation, whereas it decreases with increasing shear strain. The migration energy decreases with hydrostatic deformation, whereas it displays path-length-dependent behavior under shear deformation. In addition, we compute the binding energies of an Re solute atom to the cores of $1/2 \langle 111 \rangle$ screw and edge dislocations, and find the binding energy to be highest in the tensile lobe of the edge core. Finally, we obtain the dilatational stress due to a solute atom as a function of distance. Our calculations are then used to parameterize the jump rate of Re atoms in W as a function of the underlying stress state.
Apatite-type solid solutions with the formula Ca{sub 10}(PO{sub 4}){sub 6}Fe{sub x}O{sub y}H{sub z} containing Fe atoms in the channel sites of Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2} were successfully synthesized by impregnation with aqueous solution of Fe, followed by heat treatment at 1150 °C in air and cooling to room temperature. The unit cell volume of Ca{sub 10}(PO{sub 4}){sub 6}Fe{sub x}O{sub y}H{sub z} increased with increasing Fe content. The results of structural refinement using powder X-ray diffraction data and Raman spectroscopy suggested that the incorporated Fe ions occupied four-fold sites, away from the center of the channel in the apatite lattice. This method may be useful for synthesizing novel apatite-type functional materials containing transition metals.
In the context of waste confinement and, more specifically, waste from the nuclear industry, concrete is used both as a confinement and as a building material. Its exposure to high temperatures makes its geochemical behavior difficult to predict over large periods of time. The present work aims to elucidate the solubility constants, as a function of temperature, for the phases of the system CaO-SiO{sub 2}-H{sub 2}O. For the nanocrystalline phases, the present work investigates the existence of compounds of fixed composition, possibly in a metastable state. The question of whether the nanocrystalline C-S-H phases correspond to a series of phases of discrete composition or a solid solution is discussed and compared to the possible influence of impurities in the solid phases. For the crystalline phases, having established that the currently available values of thermodynamic properties were not consistent, we show that their refinement leads to a better agreement with the literature data. From the refined thermodynamic properties of crystalline C-S-H, a polyhedral decomposition model is developed. It enables to estimate the enthalpy of formation and the heat capacity of nanocrystalline C-S-H phases. Finally, verification shows that such phases remain unstable compared to the crystalline phases, at room or higher temperatures. A comparison, based on reaction enthalpies derived from experimental data indicates that predicted values for nanocrystalline C-S-H are in close agreement with experimental data. By estimating the properties of okenite and truscottite with the model developed in this study, we have been able to complete the CaO-SiO{sub 2}-H{sub 2}O phase diagram with a reasonable agreement with the literature. The case of jaffeite remains open to discussion. Finally, for the hydrate C2SH,alpha, the model predicts a transition with hillebrandite at 159 deg. C, in contradiction with the hypothesis of C2SH,alpha metastability.
AZ61 magnesium alloy foils of 0.5-3.0 mm thick were successfully produced by using sub-rapid solidification technique. Microstructures of conventionally solidified (CS) and sub-rapidly solidified (sub-RS) alloys were examined by optical microscope (OM) and scanning electron microscope (SEM). The results showed that the cellular grain of 1.8-13.5 {mu}m can be obtained during sub-rapid solidification process. Phase compositions and microdistribution of the alloying elements in the foils were analyzed by X-ray diffraction (XRD) and electron probe microanalyzer (EPMA), respectively. The eutectic transformation L {yields} {alpha}-Mg + {beta}-Mg{sub 17}Al{sub 12} and microsegregation in conventionally solidified AZ61 alloy were remarkably suppressed in sub-rapid solidification process. As a consequence, the alloying elements Al, Zn, Mn showed much higher solid solubility and the sub-rapid solidification microstructures dominantly consisted of supersaturated {alpha}-Mg solid solution. Meanwhile, the {beta}-Mg{sub 17}Al{sub 12} phases located in the {alpha}-Mg grain boundaries are largely decreased due to high solidification cooling rate.
An integrated in-situ neutron diffraction and elastic plastic self-consistent crystal plasticity (EPSC-CP) modeling scheme is performed on a binary Al–12Ce alloy and a ternary Al–12Ce–0.4Mg alloys. Using this scheme, the constitutive parameters, i.e. elastic constants and slip system parameters of individual phases can be calibrated which can be used in microstructure-based CP models to predict materials performance. From this study, it is shown that the elastic constants of Al 11 Ce 3 intermetallics calculated from density function theory calculation in the literature are rather accurate. When applied to the EPSC-CP model, the lattice strains of both the binary and ternary alloys are correctly predicted as compared with experiments, and large lattice strain differences between Al (100) plane and Al 11 Ce 3 (010) plane are demonstrated. The slip system parameters calibrated by the scheme shows that the addition of 0.4 wt% Mg in the alloy has little influence on the critical resolved shear stress of initial dislocation glide in the Al matrix which caused plastic yield in the material. This can be explained by the very dilute Mg solute content in the Al solid solution, causing large spacing of Al–Mg lattice misfit sites and little impact on resistance of dislocation glide at initial yield. The 0.4 wt% Mg addition, on the other hand, has a large influence on the hardening term in the slip system parameters, indicating those Al–Mg misfit sites do help dislocation accumulation during the deformation. The impact of dilute Mg addition on the Al slip system parameters is also reflected in the flow behavior of the ternary alloy: little impact on the yield stress, but a large impact on working hardening and tensile strength of the materials which is consistent with the literature.
Highlights: • Single-phase optical materials of Y{sub 6}O{sub 5}F{sub 8}:Er and YOF:Er were prepared. • Effective spectral converting properties were observed in Y{sub 6}O{sub 5}F{sub 8}:Er,Yb. • 980 nm diode laser was irradiated for up-converting analysis. • A multi-photon process in the phosphors was investigated. - Abstract: Optical materials composed of a Y{sub 6(1−p−q)}Er{sub 6p}Yb{sub 6q}O{sub 5}F{sub 8} (p = 0.001–0.1, q = 0.005–0.1) solid solution with Y{sub 0.99}Er{sub 0.01}OF were prepared via a solid-state reaction using excess NH{sub 4}F flux at 950 °C for 30 min. X-ray diffraction patterns of Y{sub 6(1−p−q)}Er{sub 6p}Yb{sub 6q}O{sub 5}F{sub 8} and Y{sub 0.99}Er{sub 0.01}OF were compared upon altering the synthesis temperature and the molar ratio of the NH{sub 4}F flux to the Y{sup 3+} (Er{sup 3+}, Yb{sup 3+}) ions. The effective spectral-conversion properties of Er{sup 3+} and Er{sup 3+}–Yb{sup 3+} ions in Y{sub 6}O{sub 5}F{sub 8} phosphors were monitored during excitation with a 980 nm wavelength diode-laser. Selection of appropriate Er{sup 3+} and/or Yb{sup 3+} concentrations in the Y{sub 6}O{sub 5}F{sub 8} structure led to achievement of the desired up-conversion emission, from the green to the red regions of the spectra. Furthermore, the mechanism of up-conversion in the phosphors was described by an energy-level schematic. Up-conversion emission spectra and the dependence of the emission intensity on pump power (between 193 and 310 mW) in the Y{sub 6(0.995−q)}Er{sub 0.03}Yb{sub 6q}O{sub 5}F{sub 8} phosphors were also investigated.
The methods of nuclear gamma-resonance spectroscopy, elemental microanalysis, and X-ray diffraction were used to study nanoscale coatings. The samples were prepared by magnetron sputtering of carbon and iron particles. They alternately were deposited on monocrystalline silicon or polycrystalline corundum substrate moving relative to the plasma flows in the form of sublayers with a thickness of less than 0.6 nm up to the total thickness of 150-500 nm. Solid solutions with the carbon concentrations of up to 7.5, 12.0, 17.6, and 23.9 at% were produced by co-precipitation of ultradispersed particles of iron and carbon. Using method of conversion electron Mössbauer spectroscopy, we detected the anisotropy of orientation of magnetic moments of iron atoms due to texturing of the formed coatings. The deviation of the crystallite orientation from the average value depends on the degree of carbonization. At 550°C, the pearlite eutectic α‐Fe(C)+Fe{sub 3}C is formed from the amorphous structure without formation of intermediate carbides. The relative content of cementite correlates with the amount of carbon in the coating. The formation of the solid solutions-alloys directly during the deposition process confirms the theory of thermal-fluctuation melting of small particles.
Quantitative analysis of mineral compositions is essential in understanding geochemical, mineralogical and environmental processes. Fine-resolution 3D imaging is widely done using synchrotron X-ray computed tomography (XCT), but existing analyses are limited to visualization and segmentation. This paper presents a new method, Linear Attenuation Bayesian Quantitative 3D-mapper (LABQ3), based on the linearity of X-ray attenuation with respect to elemental concentrations. To address the random variability in attenuation measurements, LABQ3 employs Bayesian decision theory to minimize classification error, using reference attenuation distributions from scans of pure mineral standards. To demonstrate LABQ3 and test its performance, we studied precipitated carbonate samples. XCT scans were done at multiple energies using the transmission X-ray microscope (TXM) at beamline 32-ID-C of the Advanced Photon Source at Argonne National Laboratory. The reconstructed 3D images have a voxel size of 20 nm. Analyses revealed rich nano-scale compositional heterogeneity within individual particles. A mixture of calcium and cadmium produced an overall stoichiometric composition of (Ca 0.78 ,Cd 0.22 )CO 3 , with some voxels containing nearly pure CdCO 3 . The addition of zinc led to an overall stoichiometric composition of 33% Ca, 28% Cd, 39% Zn, with a nearly pure CaCO 3 core and compositional zonation through the rim. These compositional gradients are related to temporal sequences of carbonate mineral formation where Cd precipitated at the beginning in (Ca,Cd)CO 3 , while Cd and Zn precipitated at the end in (Ca, Cd,Zn)CO 3 . Results differ from bulk analyses using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), showing that LABQ3 provides particle-specific insights. LABQ3 distinguishes itself by quantifying chemical compositions along a continuum, making it different from XCT analyses based on segmentation. LABQ3 allows simultaneous acquisition of morphology and chemical composition in 3D, facilitating the interpretation of chemical gradients of trace elements, quantification of solid solution compositions, inferences about temporal sequences of mineral precipitation, and addressing other concerns about solid-phase chemistry.