Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Evolution of macromolecular dust: Far-ultraviolet spectral dust extinction and gas absorption of stellar light as measured with the Hopkins Ultraviolet Telescope

From far-ultraviolet (FUV) spectra of B stars taken with the Hopkins Ultraviolet Telescope (HUT) and Voyager space observations, we determine the far-ultraviolet extinction by Galactic dust and hydrogen absorption in the local spiral-arm clouds towards HD 25443 (B0.5 III), HD 37903 (B1.5 V), and HD 200775 (B3 Ve). We find that the (n (H)) = 1.3 cu cm and number fraction (f = 0.31) of H atoms in molecular hydrogen relative to the total hydrogen indicates a mostly diffuse medium toward HD 25443. We also determine f = 0.56 for the gas in the photodissociation region (PDR) in front of HD 37903 and f approximately equals 0.36 for the HD 200775 PDR. The inferred ratios of N(H2)/I(CO) = 2.4 to 2.8 x 10(exp 20)/K(km/s)/sq cm for cool gas in dark clouds agree with previous canonical estimates of N(H2)/I(CO) = 2 to 3 x 10(exp 20)/K(km/s)/sq cm and support the use of the ratio for determining masses of molecular clouds. We find that the shape and strength of the HD 25443 FUV extinction is the same as a diffuse-medium mean extinction (R(sub nu) = 2.95) extrapolated from mid-UV wavelengths (normal). The HD 37903 FUV extinction through a bright H2 photodissociation region is higher than a mean FUV extinction(R(sub nu) = 4.11), as is the HD 200775 extinction. Another star from the literature rho Oph, probes the dense medium and exhibits an FUV extinction of normal mean strength (R(sub nu) = 4.55) but steeper shape. The normal FUV -extinction of HD 25443 implies that the small FUV-extinction dust in the diffuse medium forms in p art from larger grains as the grains shatter under shocks. The normal strength of the rho Oph FUV-extinction indicates that the minute dust condenses onto or coagulates into larger grains in the dense medium. The high extinction deviation of the HD 37903 PDR (and HD 200775 PDR) shows that FUV radiation from hot stars with T(sub eff) approximately equals 20,000 to 23,000 K in PDRs can evaporate some of the FUV-extinction dust from grain surfaces. In contrast, previously measured extinctions in Galactic H(+) (H II) regions shows that FUV radiation at T(sub eff) greater than 25,000 K can destroy some of the dust in H(+) regions. Thus, some of the FUV-extinction dust is highly volatile. We find that the dust carrier of the variable FUV-extinction is correlated (r = 0.99) with the mid-IR (12 micrometers) radiation from hydrocarbon dust. The volatile FUV-extinction component could thus be due to minute hydrocarbon dust particles or macromolecules, probably PAHs, which are known to condense onto larger grains in the dense medium. Larger grains compsed of PAHs clustered into a solid could thus produce the steep FUV extinction of the rho Oph dense medium. After exposure to FUV photons wihtin approximately 1 pc of HD 37903, PAHs with about 30 carbon atoms would evaporate off the larger grains, increasing gaseous PAH abundance by approximately 14%. Also, after receiving shocks in the diffuse medium toward HD 25443, the larger hydrocarbon grains would shatter into PAH molecules. In summary, as the Galactic medium cycles betwee n the diffuse and dense medium, hydrocarbon dust cycles into and out of larger grains under the influence of shocks, radiation, and condensation.

Buss, Richard H., Jr.↗

Nucleon-pair approximation for nuclei from spherical to deformed regions

Here we model low-lying states of atomic nuclei in the nucleon-pair approximation of the shell model, using three approaches to select collective nucleon pairs: the generalized seniority scheme, the conjugate gradient method, and the Hartree-Fock approach. We find the collective pairs obtained from the generalized seniority scheme provide a good description for nearly spherical nuclei, and those from the conjugate gradient method or the Hartree-Fock approach work well for transitional and deformed nuclei. Our NPA calculations using collective pairs with angular momenta 0, 2, and 4 (denoted by S D G pairs) reproduce the nuclear shape evolution in the N = 26 isotones, Ca 46 , Ti 48 , Cr 50 , and Fe 52 , and yield good agreement with full configuration-interaction calculations of low-lying states in medium-heavy transitional and deformed nuclei: Ti 44 – 48 , Cr 48 , Cr 50 , Fe 52 , Zn 60 – 64 , Ge 64 , 66 , Mo 84 , and Xe 108 – 112 . Finally, using the S D G I -pair approximation we describe low-lying states of Ba 112 , 114 , cases difficult to reach by conventional configuration-interaction methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of the utility of mean square approximation systems and in system response predictions

A method is presented for estimating the variability of a system's natural frequencies arising from the variability of the system's parameters. The only information required to obtain the estimates is the member variability, in the form of second order properties, and the natural frequencies and mode shapes of the mean system. Several examples are worked out in detail to illustrate how the method is applied.

Bogdanoff, J. L.↗

Approximating the stress field within the unit cell of a fabric reinforced composite using replacement elements

This report concerns the prediction of the elastic moduli and the internal stresses within the unit cell of a fabric reinforced composite. In the proposed analysis no restrictions or assumptions are necessary concerning yarn or tow cross-sectional shapes or paths through the unit cell but the unit cell itself must be a right hexagonal parallelepiped. All the unit cell dimensions are assumed to be small with respect to the thickness of the composite structure that it models. The finite element analysis of a unit cell is usually complicated by the mesh generation problems and the non-standard, adjacent-cell boundary conditions. This analysis avoids these problems through the use of preprogrammed boundary conditions and replacement materials (or elements). With replacement elements it is not necessary to match all the constitutional material interfaces with finite element boundaries. Simple brick-shaped elements can be used to model the unit cell structure. The analysis predicts the elastic constants and the average stresses within each constituent material of each brick element. The application and results of this analysis are demonstrated through several example problems which include a number of composite microstructures.

Foye, R. L.↗

Inertial collapse of a gas bubble in a shear flow near a rigid wall

Despite the extensive research on bubble collapse near rigid walls, the bubble collapse dynamics in the presence of shear flow near a rigid wall is poorly understood. We conduct direct simulations of the Navier–Stokes equations to explore the bubble dynamics and pressures during bubble collapse near a rigid, flat wall under linear shear flow conditions. We examine the dependence of the bubble collapse morphology and wall pressures on the initial bubble location and shear rate. We find that shear distorts the bubble, generating two re-entrant jets – one developing from the side opposite to the mean flow and the other from the far end toward the wall. Upon impact of the jet on the opposite side of the bubble, water-hammer shocks are produced, which propagate outward and interact with the convoluted bubble shape. The shock stretches the bubble towards the wall, resulting in a closer impact location for the jet originating from the far end compared with the case with no shear flow. The water-hammer pressure location can be approximated as the theoretical distance travelled by a particle initialised at the bubble centre with the corresponding constant shear flow velocity. The maximum wall pressures can thus be predicted by considering the distance between the far jet impingement location and the wall along the wall-normal direction. As the shear rate is increased, the maximum wall pressure increases, although only marginally. We determine the critical initial stand-off distance from the wall at which the bubble morphology is shear dominated, i.e. characterised by converging re-entrant jets.

Bhola, Sahil (ORCID:0000000236766302)↗

On the choice of reference orbitals for linear-response calculations of solution-phase K-edge X-ray absorption spectra

The simplest response theory methods for computing vertical excitation spectra in condensed-phase are configuration interaction with single excitations (CIS) and linear-response time-dependent density functional theory (TDDFT) within the Tamm–Dancoff approximation. In applications to X-ray absorption spectroscopy (XAS), methods like CIS and TDDFT that codify only single excitations into the wave function are prone to catastrophic errors in main-edge and post-edge features whose shapes act as a crucial fingerprint in structural analyses of liquids. Here, we show that these errors manifest primarily due to a lack of orbital relaxation in conventional linear-response theories and that core-ionized (n - 1-electron) references, like those of electron-affinity TDDFT, can eliminate the errors in the spectral profile, even in the highest-energy parts of the post-edge. Crucially, we find that single excitations atop core-ionized references are sufficient to elucidate liquid-phase XAS spectra with semi-quantitative accuracy, opening the door for methods like electron-affinity CIS/TDDFT to be used as efficient alternatives to higher-order wave function approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Genome resequencing reveals demographic history and genetic architecture of seed salinity tolerance in Populus euphratica

Populus euphratica is a dominant tree species in desert riparian forests and possesses extraordinary adaptation to salinity stress. Exploration of its genomic variation and molecular underpinning of salinity tolerance is important for elucidating population evolution and identifying stress-related genes. Here, we identify approximately 3.15 million single nucleotide polymorphisms using whole-genome resequencing. The natural populations of P. euphratica in northwest China are divided into four distinct clades that exhibit strong geographical distribution patterns. Pleistocene climatic fluctuations and tectonic deformation jointly shaped the extant genetic patterns. A seed germination rate-based salinity tolerance index was used to evaluate seed salinity tolerance of P. euphratica and a genome-wide association study was implemented. A total of 38 single nucleotide polymorphisms were associated with seed salinity tolerance and were located within or near 82 genes. Expression profiles showed that most of these genes were regulated under salt stress, revealing the genetic complexity of seed salinity tolerance. Furthermore, DEAD-box ATP-dependent RNA helicase 57 and one undescribed gene (CCG029559) were demonstrated to improve the seed salinity tolerance in transgenic Arabidopsis. These results provide new insights into the demographic history and genetic architecture of seed salinity tolerance in desert poplar.

59 BASIC BIOLOGICAL SCIENCES↗

Salt Tank Testbed: a Test Site Designed to Replicate Floor Buckles Observed in Commercial TES Tanks

A test site has been designed and is under construction to replicate the buckling failure ob-served in several in-service storage tanks for nitrate salts operating up to 565°C. In commercial tanks multiple factors have been identified that influence the floors susceptibility to buck-ling, including: the as-manufactured shape of the floor, high compressive stresses due to thermal gradients and/or friction, fluid inventory and absolute temperature. Based on exten-sive modeling analysis it was determined that similar buckles can be reproduced in a scaled test tank (approximately 9x smaller than a representative commercial tank design). To buckle the scaled tank a radial thermal gradient is generated in the tank with a low fluid level, the fluid level is then increased while maintaining the thermal gradient; based on the modeling results just one of these cycles can plastically deform the tank floor. The test site which is under construction is designed to replicate this damaging cycle at lower temperatures. The goal of testing will be to reproduce this damaging cycle and buckle the scaled test tank floor, allowing proper model validation and a methodology for comparing different tank designs at a smaller (and less costly) scale.

25 ENERGY STORAGE↗

Turbulent boundary layers over nonstationary plane boundaries

Methods of predicting integral parameters and skin-friction coefficients of turbulent boundary layers developing over moving-ground-planes are evaluated using test information from three different wind tunnel facilities at the NASA Langley Research Center. These data include test information from the VSTOL tunnel which is presented for the first time. The three methods evaluated were: (1) relative integral parameter method, (2) relative power law method, and (3) modified law of the wall method. Methods (1) and (2) can be used to predict moving-ground-plane shape factors with an expected accuracy of + or - 10%. They may also be used to predict moving-ground-plane displacement and momentum thicknesses with lower expected accuracy. This decrease in accuracy can be traced to the failure of approximations upon which these methods are based to prove universal when compared with VSTOL tunnel test results.

Roper, A. T.↗

Two-micron line emission from the H II region G 333.6-0.2

Spectrophotometry of the H II region G 333.6-0.2 with a resolution of approximately 100 shows strong emission lines of hydrogen and helium superimposed on a continuum. Spatial variations in the equivalent widths of the lines suggest the presence of very hot (at least 600 K) dust grains within the region. The shape of this very powerful H II region indicates that its dense ionized core is being continuously replenished from a reservoir of neutral gas.

Wynn-Williams, C. G.↗

Spectroscopy of the B-gamma line in the Galactic center

Spectra of the B-gamma recombination line of hydrogen in the Galactic center show that the line has central velocities and shapes similar to those reported previously for the Ne II line. Observations are made at 10 positions within the infrared cluster of the Galactic center with a circular diaphragm of diameter 5 arcsec and with a spectral resolution of approximately 85 km/sec. The spectra confirm that the ionized gas in the Galactic center is distributed in discrete clouds.

Nadeau, D.↗

Interpretation of cosmic ray composition - The path length distribution

The chemical composition of cosmic ray nuclei, the value of Z varying between 3 and 28, and being between a few hundred MeV/nucleon and a few hundred GeV/nucleon, is compared with a consistent set of propagation calculations. These include the effects of spallation (energy-dependent cross sections are used), escape, ionization loss in the interstellar medium, and deceleration in the solar cavity. The amount of matter traversed by cosmic rays is found to be approximately 7 g/sq cm, independent of energy between 100 MeV/nucleon and 2 GeV/nucleon. Above 2 GeV/nucleon, the escape length varies as the -0.4 + or 0.1 power of the energy. In addition, a procedure has been developed to measure the shape of the cosmic ray path length distribution. Utilizing the ratio of Fe secondaries to Fe in the cosmic rays, presently available data are found to be consistent with an exponential distribution and they eliminate models in which the path length distribution is severely truncated. To tie down the shape of the distribution more precisely, new measurements of the cosmic ray composition, presently becoming available from experiments on the HEAO 3 satellite, will have to be coupled with improved measurements of the energy dependence of partial and total cross sections.

Protheroe, R. J.↗

A mesh re-zoning technique for finite element simulations of metal forming processes

Based on some fundamental properties of finite element approximations, a mesh re-zoning scheme is proposed for finite element simulations of metal forming problems. It is demonstrated that this technique is indispensable in analyzing many difficult forming processes, especially when there exist corners or very irregular shapes on the boundaries. The algorithm is tested by a backward extrusion process and direct extrusion through a square die.

Cheng, J.-C.↗

Field structure of collapsing wave packets in 3D strong Langmuir turbulence

A simple model is constructed for the electric fields in the collapsing wave packets found in 3D simulations of driven and damped isotropic strong Langmuir turbulence. This model, based on a spherical-harmonic decomposition of the electrostatic potential, accounts for the distribution of wave-packet shapes observed in the simulations, particularly the predominance of oblate wave packets. In contrast with predictions for undamped and undriven subsonic collapse of scalar fields, oblate vector-field wave packets do not flatten during collapse but, instead, remain approximately self-similar and rigid.

Newman, D. L.↗

Modern CACSD using the Robust-Control Toolbox

The Robust-Control Toolbox is a collection of 40 M-files which extend the capability of PC/PRO-MATLAB to do modern multivariable robust control system design. Included are robust analysis tools like singular values and structured singular values, robust synthesis tools like continuous/discrete H(exp 2)/H infinity synthesis and Linear Quadratic Gaussian Loop Transfer Recovery methods and a variety of robust model reduction tools such as Hankel approximation, balanced truncation and balanced stochastic truncation, etc. The capabilities of the toolbox are described and illustated with examples to show how easily they can be used in practice. Examples include structured singular value analysis, H infinity loop-shaping and large space structure model reduction.

Chiang, Richard Y.↗

Predicted aerodynamics for a proposed personnel launch vehicle

The Langley Aerothermodynamic Upwind Relaxation Algorithm has been modified to compute equilibrium flows over shapes at hypersonic velocities. As an initial test of the modified code, solutions were obtained for a paraboloid at Mach 6 wind-tunnel test conditions in CF4 gas and at Mach 16.85 flight conditions in equilibrium air that approximated the normal shock density ratio for the experimental test. Solutions for a lifting-body concept that is proposed for a Personnel Launch System were compared with test results at Mach 6 in CF4 over an angle-of-attack range of 15 to 35 deg and with results for nominal entry flight conditions at Mach 15.

Greene, Francis A.↗

Large scale motions of Neptune's bow shock: Evidence for control of the shock position by the rotation phase of Neptune's magnetic field

The Voyager 2 spacecraft observed high levels of Langmuir waves before the inbound crossing of Neptune's bow shock, thereby signifying magnetic connection of the bow shock. The Langmuir waves occurred in multiple bursts throughout two distinct periods separated by an 85 minute absence of wave activity. The times of onsets, peaks, and disappearances of the waves were used together with the magnetic field directions and spacecraft position, to perform a 'remote-sensing' analysis of the shape and location of Neptune's bow shock prior to the inbound bow shock crossing. The bow shock is assumed to have a parabolidal shape with a nose location and flaring parameter determined independently for each wave event. The remote-sensing analysis give a shock position consistent with the time of the inbound shock crossing. The flaring parameter of the shock remains approximately constant throughout each period of wave activity but differs by a factor of 10 between the two periods. The absence of waves between two periods of wave activity coincides with a large rotation of the magnetic field and a large increase in the solar wind ram pressure' both these effects lead to magnetic disconnection of the spacecraft from shock. The planetwards motion of the shock's nose from 38.5 R(sub N) to 34.5 R(sub N) during the second time period occurred while the solar wind ram pressure remained constant to within 15 percent. This second period of planetwards motion of the shock is therefore strong evidence for Neptune's bow shock moving in response to the rotation of Neptune's oblique, tilted magnetic dipole. Normalizing the ram pressure, the remotely-sensed shock moves sunwards during the first wave period and planetwards in the second wave period. The maximum standoff distance occurs while the dipole axis is close to being perpendicular to the Sun-Neptune direction. The remote-sensing analysis provides strong evidence that the location of Neptune's bow shock is controlled by Neptune's rotation phase.

Cairns, Iver H.↗

Scavenging a Piston-ported Two-stroke Cylinder

An investigation was made with a specially designed engine to determine the scavenging characteristics of a large number of inlet-port shapes and arrangements and the optimum port arrangement and timing for this particular type of engine. A special cylinder construction permitted wide variations in timing for this particular type of engine. A special cylinder construction permitted wide variations in timing as well as in shape and arrangement of both the inlet and exhaust ports. The study of the effect of port shape combinations and timings on engine performance was made using illuminating gas as a fuel. Through variations in inlet-port arrangement and port timings, the value of the scavenging efficiency was increased from an original 44 percent to approximately 67 percent with a corresponding increase in power. With the optimum port arrangement and timing determined, a large number of performance runs were made under both spark-ignition and compression-ignition operation.

Rogowski, A R↗