Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selective separators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Separation characteristics of cations and natural organic matter in electrodialysis

Natural organic matter (NOM) in water can cause the formation of disinfection byproducts (DBPs) when NOM reacts with a disinfectant such as chlorine. Nanofiltration (NF) and reverse osmosis (RO) are effective treatment methods to remove NOM. However, the simultaneous presence of both NOM and divalent cations such as Ca 2+ can enhance fouling in NF and RO. Therefore, an appropriate pretreatment to remove such cations before NF or RO would delay fouling and perhaps improve water recovery and NOM removal efficiency. Electrodialysis (ED) is potentially an excellent pretreatment method because it separates inorganic ions well using ion exchange membranes (IEMs) but does not separate NOM well because of its size and consequent low diffusivity. This research focused on ion and NOM separation with ED using three different types of commercially available IEM pairs, two different commercially available NOM sources, and six different influents at 500 mg/L total dissolved solids in the presence or absence of both hardness (Ca 2+ and Mg 2+ ) and NOM. The target waters of interest in this research were drinking water supplies that require little or no desalination but substantial removal of NOM; after NOM separation in NF or RO, some or all of the ED concentrate can be added to the NF/RO permeate to create the finished water prior to disinfection. The results indicate that ED can effectively separate alkaline earth metal ions without separation of NOM. Cation exchange membranes with high exchange capacity, high selectivity for divalent cations are desirable, and both anion and cation exchange membranes should have low affinity for organic adsorption. As a result, the process would work particularly well for NOM with relatively low hydrophobicity, since NOM adsorption to most surfaces increases with hydrophobicity.

36 MATERIALS SCIENCE↗

Chemical Potential Driven Reorganization of Anions between Stern and Diffuse Layers at the Air/Water Interface

We report ion adsorption and transfer at charged interfaces play key roles in various industrial and environmental processes. Molecular scale details of ion-ion, ion-water, and ion-surface interactions are still debated. Complex ions, such as SCN - and SeCN - , are particularly interesting due to their unexpected adsorption trends. Here, we combine vibrational sum frequency generation (VSFG) spectroscopy and surface-sensitive synchrotron X-ray studies to provide a detailed description of SeCN - adsorption at a floating charged monolayer. Polarimetry studies show that the average orientation of SeCN - anions with respect to the surface normal decreases from 45° to 22° with the increasing KSeCN concentration. Interfacial SeCN - coverage saturates at very low bulk concentrations, but their orientational organization, distribution between Stern and diffuse layers, and effects on the hydrogen-bonding network of the interfacial water continue to change with increasing bulk KSeCN concentration. These results show that the increasing chemical potential may lead to further reorganization of the adsorbed ions, even though the total interfacial ion population does not change. The reorganization of the interfacial ions and the water may be very important in chemical separations of heavy metals, where metal-anion complexes drive the selective ion transfer at aqueous interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable Porosity in Fused Filament 3D-Printed Blends of Intrinsically Porous Polymer and Thermoplastic Aliphatic Polyesters Polycaprolactone and Polylactic Acid

Future advances and usage of all-organic polymeric materials with permanent void spaces and high surface areas, in applications such as separations or as supports, depends heavily on the development of processing techniques to produce complex geometry objects. Here, the high free volume glassy microporous polymer PIM-1 was fabricated, as a major component in a polymer blend, into complex and customizable 3D objects by fused filament fabrication (FFF). PIM-1 was found to be compatible with polycaprolactone (PCL) and polylactic acid (PLA) and thus could be processed by extrusion into filaments with high loadings of PIM-1 (50% by mass). Ternary PCL/PLA/PIM-1 composite filaments provided an optimal balance of durability and melt flow characteristics for consistent FFF 3D printing of intricate structures. As printed, the micropores of PIM-1 were blocked and inaccessible to N2 during sorption experiments; however, the ternary composite structures displayed significant meso- and macroporosity and nanostructured phase separation. Postprinting immersion in 3-chloro-1-propanol was identified to selectively remove PCL within the composites, re-expose the characteristic micropores of PIM-1, and retain the macrostructure of the printed object. After postprinting treatments, specific surface areas by the Brunauer–Emmett–Teller method (as high as 460 m2 g–1) were found to directly correlate with the PCL content originally present. In conclusion, the extrusion-based processing methodology provides a new approach for production of intrinsically porous polymer objects in custom and complex shapes by reinforcement with thermoplastics (PCL and PLA).

36 MATERIALS SCIENCE↗

Lignin Extraction and Condensation as a Function of Temperature, Residence Time, and Solvent System in Flow-through Reactors

Solvolytic extraction of lignin from biomass is a critical step in lignin-first biorefining, including the reductive catalytic fractionation (RCF) process. Key to optimal RCF processing is the ability to rapidly extract lignin from biomass at high delignification extents and transfer the lignin molecules to a catalyst surface in a time frame that minimizes lignin condensation reactions. Here, we use a flow-through reactor to study the effects of temperature (175-250 °C), residence time (9 to 36 min), and solvent composition (methanol and methanol-water) on lignin extraction and condensation. We evaluated three metrics at each condition: total delignification, delignification rate, and extent of condensation, the latter measured by a decrease in monomer yield for batch hydrogenolysis reactions of solvolysis liquor compared to batch RCF reactions. We observe that delignification is predominantly determined by temperature, while residence time dictates the lignin condensation extent. Moreover, the extent of both extraction and condensation increased in the methanol-water solvent system compared to that in the methanol system. Lignin extracted in methanol is stable up to 18-min residence times at or below 225 °C, while a majority of the lignin extracted in methanol-water is condensed with a 9-min residence time at 200 °C. These results can inform reactor designs and solvent selection for lignin-first biorefining processes that aim to physically separate the biomass and catalyst.

09 BIOMASS FUELS↗

Lasing on the D lines of sodium pumped by free{yields}free transitions of Na-Xe collision pairs

Lasing on the D{sub 1} and D{sub 2} lines of Na (589.6 and 589.0 nm, respectively) has been generated simultaneously by photoexciting free{yields}free transitions of thermal Na-Xe collision pairs. Pumping the blue satellite of the Na D{sub 2} line in Na/Xe mixtures ({lambda} Almost-Equal-To 560 nm) selectively interacts with Na-Xe pairs having an instantaneous internuclear separation of {approx}5 A and culminates in the population of both Na (3{sup 2}P{sub J}) fine structure levels. The spectral width of the laser excitation spectrum is 1.3 nm (centered at 560.1 nm) and the 3{sup 2}P{sub 3/2}{yields}3{sup 2}S{sub 1/2} (D{sub 2}) laser linewidth was measured to be 9.2 {+-} 0.6 GHz, which is consistent with a coefficient of 18.4 MHz/Torr for broadening of the D{sub 2} 589.0 nm transition by Xe.

74 ATOMIC AND MOLECULAR PHYSICS↗

Free-energy calculations for semi-flexible macromolecules: Applications to DNA knotting and looping

We present a method to obtain numerically accurate values of configurational free energies of semiflexible macromolecular systems, based on the technique of thermodynamic integration combined with normal-mode analysis of a reference system subject to harmonic constraints. Compared with previous free-energy calculations that depend on a reference state, our approach introduces two innovations, namely, the use of internal coordinates to constrain the reference states and the ability to freely select these reference states. As a consequence, it is possible to explore systems that undergo substantially larger fluctuations than those considered in previous calculations, including semiflexible biopolymers having arbitrary ratios of contour length L to persistence length P. To validate the method, high accuracy is demonstrated for free energies of prime DNA knots with L/P = 20 and L/P = 40, corresponding to DNA lengths of 3000 and 6000 base pairs, respectively. We then apply the method to study the free-energy landscape for a model of a synaptic nucleoprotein complex containing a pair of looped domains, revealing a bifurcation in the location of optimal synapse (crossover) sites. This transition is relevant to target-site selection by DNA-binding proteins that occupy multiple DNA sites separated by large linear distances along the genome, a problem that arises naturally in gene regulation, DNA recombination, and the action of type-II topoisomerases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An ion mobility mass spectrometer for investigating photoisomerization and photodissociation of molecular ions

An ion mobility mass spectrometry apparatus for investigating the photoisomerization and photodissociation of electrosprayed molecular ions in the gas phase is described. The device consists of a drift tube mobility spectrometer, with access for a laser beam that intercepts the drifting ion packet either coaxially or transversely, followed by a quadrupole mass filter. An ion gate halfway along the drift region allows the instrument to be used as a tandem ion mobility spectrometer, enabling mobility selection of ions prior to irradiation, with the photoisomer ions being separated over the second half of the drift tube. The utility of the device is illustrated with photoisomerization and photodissociation action spectra of carbocyanine molecular cations. The mobility resolution of the device for singly charged ions is typically 80 and it has a mass range of 100-440 Da, with the lower limit determined by the drive frequency for the ion funnels, and the upper limit by the quadrupole mass filter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Communication: Electron diffraction of ferrocene in superfluid helium droplets

We report electron diffraction of ferrocene doped in superfluid helium droplets. By taking advantage of the velocity slip in our pulsed droplet beam using a pulsed electron gun, and by doping with a high concentration of ferrocene delivered via a pulsed valve, we can obtain high quality diffraction images from singly doped droplets. Under the optimal doping conditions, 80% of the droplets sampled in the electron beam are doped with just one ferrocene molecule. Extension of this size selection method to dopant clusters has also been demonstrated. However, incomplete separation of dopant clusters might require deconvolution and modeling of the doping process. This method can be used for studies of nucleation processes in superfluid helium droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Well separated trion and neutral excitons on superacid treated MoS{sub 2} monolayers

Developments in optoelectronics and spin-optronics based on transition metal dichalcogenide monolayers (MLs) need materials with efficient optical emission and well-defined transition energies. In as-exfoliated MoS{sub 2} MLs, the photoluminescence (PL) spectra even at low temperature consist typically of broad, overlapping contributions from neutral, charged excitons (trions) and localized states. Here, we show that in superacid treated MoS{sub 2} MLs, the PL intensity increases by up to 60 times at room temperature. The neutral and charged exciton transitions are spectrally well separated in PL and reflectivity at T = 4 K, with linewidth for the neutral exciton of 15 meV, but both transitions have similar intensities compared to the ones in as-exfoliated MLs at the same temperature. Time resolved experiments uncover picoseconds recombination dynamics analyzed separately for charged and neutral exciton emissions. Using the chiral interband selection rules, we demonstrate optically induced valley polarization for both complexes and valley coherence for only the neutral exciton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic analysis of the stability of planar interfaces between coexisting phases and its application to supercooled water

Two-phase simulations are commonly used to evaluate coexistence conditions, interfacial tensions, and other thermodynamic properties associated with first-order phase transitions. Calculation of these properties is often simplified when the interfaces between the two phases are flat or planar. In this paper, we derive a general thermodynamic criterion for selecting simulation cell dimensions to stabilize planar interfaces in phase-separated fluid-fluid systems with respect to homogeneous, single-phase states. The resulting expression is validated by analyzing the effects of simulation cell dimensions on the formation of planar liquid-vapor interfaces in the Lennard-Jones fluid and in the TIP4P/2005 model of water. We also perform large scale molecular dynamics simulations to study metastable liquid-liquid phase separation in the ST2 and TIP4P/2005 models of water under deeply supercooled conditions. Our simulations confirm the stability of a liquid-liquid interface in ST2, and they demonstrate that the corresponding interface for TIP4P/2005 can be stabilized by judiciously choosing the simulation cell aspect ratio in a manner consistent with the thermodynamic criterion. We posit that this sensitivity to the simulation cell aspect ratio may explain discrepancies between previous studies examining liquid-liquid separation in models of supercooled water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of a 2.1 MeV H− beam with an Allison scanner

Transverse 2D phase space distributions of a 2.1 MeV, 5 mA H− beam are measured at the Proton Improvement Plan II Injector Test accelerator at Fermilab with an Allison scanner. This paper describes the design, calibration, and performance of the scanner along with the main results from beam measurements. Analyses of the recorded phase portraits are performed primarily in action-phase coordinates. The stability of the action under linear optics makes it easier to compare measurements taken under different beamline conditions. The amplitude of a single measured point (“pixel”) is proportional to the phase density in the corresponding portion of the beam. When the Twiss parameters are calculated using only the high-phase density part of the beam, the pixel amplitude in the beam core is found to be decreasing approximately exponentially with action and to be phase-independent. Outside of the core, the amplitudes decrease with action at a slower rate than in the core. This “tail” comprises 10%–30% of the beam, with 0.1% of the total measured intensity extending beyond action 10–20 times larger than the rms emittance. The transition from the core to the tail is accompanied by the appearance of two “branches” that are separated in phase and extend beyond the core. A set of selected measurements shows that there is no measurable emittance dilution along the beamline; the beam parameters are practically constant over a 0.5 ms pulse; and scraping in various parts of the beamline is an effective way to decrease the transverse tails by removing the branches.

Richard, C. (ORCID:000000029891135X)↗

ACTIVE GALACTIC NUCLEUS PAIRS FROM THE SLOAN DIGITAL SKY SURVEY. I. THE FREQUENCY ON {approx}5-100 kpc SCALES

Galaxy-galaxy mergers and close interactions have long been regarded as a viable mechanism for channeling gas toward the central supermassive black holes (SMBHs) of galaxies which are triggered as active galactic nuclei (AGNs). AGN pairs, in which the central SMBHs of a galaxy merger are both active, are expected to be common from such events. We conduct a systematic study of 1286 AGN pairs at z-bar {approx}0.1 with line-of-sight velocity offsets {Delta}v < 600 km s{sup -1} and projected separations r{sub p} < 100 h{sup -1}{sub 70} kpc, selected from the Seventh Data Release of the Sloan Digital Sky Survey (SDSS). This AGN pair sample was drawn from 138,070 AGNs optically identified based on diagnostic emission line ratios and/or line widths. The fraction of AGN pairs with 5 h{sup -1}{sub 70} kpc {approx}< r{sub p} < 100 h{sup -1}{sub 70} kpc among all spectroscopically selected AGNs at 0.02 < z < 0.16 is 3.6% after correcting for SDSS spectroscopic incompleteness; {approx}30% of these pairs show morphological tidal features in their SDSS images, and the fraction becomes {approx}> 80% for pairs with the brightest nuclei. Our sample increases the number of known AGN pairs on these scales by more than an order of magnitude. We study their AGN and host-galaxy star formation properties in a companion paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Morphological parameters of a Spitzer survey of stellar structure in galaxies

The morphology of galaxies can be quantified to some degree using a set of scale-invariant parameters. Concentration (C), asymmetry (A), smoothness (S), the Gini index (G), the relative contribution of the brightest pixels to the second-order moment of the flux (M {sub 20}), ellipticity (E), and the Gini index of the second-order moment (G{sub M} ) have all been applied to morphologically classify galaxies at various wavelengths. Here, we present a catalog of these parameters for the Spitzer Survey of stellar structure in Galaxies, a volume-limited, near-infrared (NIR) imaging survey of nearby galaxies using the 3.6 and 4.5 μm channels of the Infrared Array Camera on board the Spitzer Space Telescope. Our goal is to provide a reference catalog of NIR quantified morphology for high-redshift studies and galaxy evolution models with enough detail to resolve stellar mass morphology. We explore where normal, non-interacting galaxies—those typically found on the Hubble tuning fork—lie in this parameter space and show that there is a tight relation between concentration (C {sub 82}) and M {sub 20} for normal galaxies. M {sub 20} can be used to classify galaxies into earlier and later types (i.e., to separate spirals from irregulars). Several criteria using these parameters exist to select systems with a disturbed morphology, i.e., those that appear to be undergoing a tidal interaction. We examine the applicability of these criteria to Spitzer NIR imaging. We find that four relations, based on the parameters A and S, G and M {sub 20}, G{sub M} , C, and M {sub 20}, respectively, select outliers in morphological parameter space, but each selects different subsets of galaxies. Two criteria (G{sub M} > 0.6, G > –0.115 × M {sub 20} + 0.384) seem most appropriate to identify possible mergers and the merger fraction in NIR surveys. We find no strong relation between lopsidedness and most of these morphological parameters, except for a weak dependence of lopsidedness on concentration and M {sub 20}.

79 ASTRONOMY AND ASTROPHYSICS↗

Temporal Gating of Synaptic Competition in the Amygdala by Cannabinoid Receptor Activation

Abstract The acquisition of fear memories involves plasticity of the thalamic and cortical pathways to the lateral amygdala (LA). In turn, the maintenance of synaptic plasticity requires the interplay between input-specific synaptic tags and the allocation of plasticity-related proteins. Based on this interplay, weakly activated synapses can express long-lasting forms of synaptic plasticity by cooperating with strongly activated synapses. Increasing the number of activated synapses can shift cooperation to competition. Synaptic cooperation and competition can determine whether two events, separated in time, are associated or whether a particular event is selected for storage. The rules that determine whether synapses cooperate or compete are unknown. We found that synaptic cooperation and competition, in the LA, are determined by the temporal sequence of cortical and thalamic stimulation and that the strength of the synaptic tag is modulated by the endocannabinoid signaling. This modulation is particularly effective in thalamic synapses, supporting a critical role of endocannabinoids in restricting thalamic plasticity. Also, we found that the availability of synaptic proteins is activity-dependent, shifting competition to cooperation. Our data present the first evidence that presynaptic modulation of synaptic activation, by the cannabinoid signaling, functions as a temporal gating mechanism limiting synaptic cooperation and competition.

Madeira, Natália↗

Characterizing Minimum Admissible Separation Distances in Heavy Duty Vehicle Platoons

Heavy duty (HD) vehicles platooning under highway operating conditions, have been projected to provide significant fuel economy (FE) gains based on aerodynamic drag reduction of the platooning vehicles. Realizing these benefits under real-world operating conditions have several challenges. This paper (the second as part of series) quantifies the minimum admissible separation distance between platooning vehicles in HD commercial vehicle (CV) applications. This distance must be set up such that no collision occurs with leading vehicles under all deceleration conditions. In this paper key interactions to characterize this distance are demonstrated. These include, road surface conditions, grade, inter-vehicle communication delays, air-brake lag time, vehicle speed, weight, and aerodynamic drag. It is seen that characterizing the vehicle and road dynamics will be critical in establishing required deceleration or stopping distances for each vehicle in a platoon. The results of the study also necessitate vehicle control systems that can dynamically adjust not only the separation distances but also the braking reference points based on road conditions. The narrative provides application decision personnel with a well-defined set of admissible separation distance impact factors to consider as part of their architecture selection process.

Sujan, Vivek↗

Noise reduction in spectral CT: Reducing dose and breaking the trade-off between image noise and energy bin selection

Purpose: Our purpose was to reduce image noise in spectral CT by exploiting data redundancies in the energy domain to allow flexible selection of the number, width, and location of the energy bins. Methods: Using a variety of spectral CT imaging methods, conventional filtered backprojection (FBP) reconstructions were performed and resulting images were compared to those processed using a Local HighlY constrained backPRojection Reconstruction (HYPR-LR) algorithm. The mean and standard deviation of CT numbers were measured within regions of interest (ROIs), and results were compared between FBP and HYPR-LR. For these comparisons, the following spectral CT imaging methods were used:(i) numerical simulations based on a photon-counting, detector-based CT system, (ii) a photon-counting, detector-based micro CT system using rubidium and potassium chloride solutions, (iii) a commercial CT system equipped with integrating detectors utilizing tube potentials of 80, 100, 120, and 140 kV, and (iv) a clinical dual-energy CT examination. The effects of tube energy and energy bin width were evaluated appropriate to each CT system. Results: The mean CT number in each ROI was unchanged between FBP and HYPR-LR images for each of the spectral CT imaging scenarios, irrespective of bin width or tube potential. However, image noise, as represented by the standard deviation of CT numbers in each ROI, was reduced by 36%-76%. In all scenarios, image noise after HYPR-LR algorithm was similar to that of composite images, which used all available photons. No difference in spatial resolution was observed between HYPR-LR processing and FBP. Dual energy patient data processed using HYPR-LR demonstrated reduced noise in the individual, low- and high-energy images, as well as in the material-specific basis images. Conclusions: Noise reduction can be accomplished for spectral CT by exploiting data redundancies in the energy domain. HYPR-LR is a robust method for reducing image noise in a variety of spectral CT imaging systems without losing spatial resolution or CT number accuracy. This method improves the flexibility to select energy bins in the manner that optimizes material identification and separation without paying the penalty of increased image noise or its corollary, increased patient dose.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Biomimetic potassium-selective nanopores

Reproducing the exquisite ion selectivity displayed by biological ion channels in artificial nanopore systems has proven to be one of the most challenging tasks undertaken by the nanopore community, yet a successful achievement of this goal offers immense technological potential. Here, we show a strategy to design solid-state nanopores that selectively transport potassium ions and show negligible conductance for sodium ions. The nanopores contain walls decorated with 4'-aminobenzo-18-crown-6 ether and single-stranded DNA (ssDNA) molecules located at one pore entrance. The ionic selectivity stems from facilitated transport of potassium ions in the pore region containing crown ether, while the highly charged ssDNA plays the role of a cation filter. Achieving potassium selectivity in solid-state nanopores opens new avenues toward advanced separation processes, more efficient biosensing technologies, and novel biomimetic nanopore systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CpoS-Inc interactions facilitate host cell modulation during Chlamydia trachomatis infection

ABSTRACT Chlamydia trachomatis ( C.t .), the leading bacterial cause of sexually transmitted infections, replicates within a unique intracellular compartment called the inclusion, which is modified by secreted proteins known as inclusion membrane (Inc) proteins. Here, we further characterize CpoS, an Inc protein previously shown to be critical for bacterial replication and inclusion development. We demonstrate that CpoS directly binds multiple coiled-coil region-containing Incs and engages Rab GTPases at a separate site. Notably, CpoS-InaC interactions facilitate the recruitment of select Arf GTPases to the inclusion membrane, while Rab recruitment occurs independently of these interactions. Biochemical and biophysical analyses revealed that Incs self-oligomerize to form higher-ordered structures, with CpoS adopting a tetrameric conformation resembling that of eukaryotic SNARE proteins. We propose that these assemblies serve as scaffolds to orchestrate vesicle docking, tethering, and fusion. Our findings highlight the intricate interplay between bacterial and host factors, revealing how C.t . leverages both Inc-Inc interactions and host protein engagement to manipulate vesicular trafficking and sustain infection.

Tijerina, Xavier [Department of Microbiology and I↗