SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The shooting method is used to solve the suboptimal control problem where the control history is assumed to be piecewise linear. Suboptimal solutions can be obtained without difficulty and can lead to accurate approximate controls and good starting multipliers for the regular shooting method by increasing the number of nodes. Optimal planar launch trajectories are presented for the advanced launch system.
The ability of iodine to maintain microbial water quality in a simulated spacecraft water system is being studied. An iodine level of about 2.0 mg/L is maintained by passing ultrapure influent water through an iodinated ion exchange resin. Six liters are withdrawn daily and the chemical and microbial quality of the water is monitored regularly. Stainless steel coupons used to monitor biofilm formation are being analyzed by culture methods, epifluorescence microscopy, and scanning electron microscopy. Results from the first two years of operation show a single episode of high bacterial colony counts in the iodinated system. This growth was apparently controlled by replacing the iodinated ion exchange resin. Scanning electron microscopy indicates that the iodine has limited but not completely eliminated the formation of biofilm during the first two years of operation. Significant microbial contamination has been present continuously in a parallel noniodinated system since the third week of operation.
A software-based method for real-time, active stabilization of tunable diode laser spectral scans is described. The procedure is suitable for use with field and laboratory instrumentation where automated, unattended spectrometer operation is required. An autocorrelation of two high-resolution reference gas infrared spectra is computed at regular intervals, and the location of the maximum value of the autocorrelation provides the relative abscissa shift between the spectra. Small adjustments to the laser scan parameters are thereby made to ensure that drifts in the laser output frequency are tracked and compensated. Calculations required for stabilization of a 512-point spectrum can be completed in under 25 ms using an inexpensive, moderate-speed, array processor installed in a PC.
Mars Observer radio science investigations focus on two major areas of study: the gravity field and the atmosphere of Mars. Measurement accuracies expressed as an equivalent spacecraft velocity are expected to be of the order of 100 microns/s (for both types of investigations) from use of an improved radio transponder for two-way spacecraft tracking and a highly stable on-board oscillator for atmospheric occultation measurements. Planned gravity investigations include a combination of classical and modern elements. A spherical harmonic (or equivalent) field model of degree and order in the range 30-50 will be obtained, while interpretation will be in terms of internal stress and density models for the planet, using the topography to be obtained from the Mars Observer laser altimeter. Atmospheric investigations will emphasize precision measurement of the thermal structure and dynamics in the polar regions, which are regularly accessible as a result of the highly inclined orbit. Studies based on the measurements will include polar processes, cycling of the atmosphere between the poles, traveling baroclinic disturbances, small-scale waves and turbulence, the planetary boundary layer, and (possibly) the variability and altitude of the ionosphere.
The purpose of the Mars Environmental Survey (MESUR) mission is to put in place, over several launch opportunities, a constellation of Mars landers to make long-term surface observations of the circulation of the atmosphere and changes in climate, and to record the seismic activity of the planetary crust. Short-term objectives will also be addressed. An orbital communications infrastructure capable of providing regular high-rate data transfer to earth from the landers, which are scattered globally from pole to pole, is key to accomplishing the mission goals. A study is thereby presented of the orbit selection for the orbiter spacecraft, which will provide this support, and the relay communications operation. It is concluded that adequate communications support for the objectives of the MESUR mission can be provided by a single orbiter, provided care is taken in the selection of the size and orientation (i.e., inclination and apse line alignment) of the spacecraft orbit.
Single and double lunar swingbys have previously been suggested for earth escape missions. This paper investigates the payload gain available from single and double lunar gravity assists. The gain available from a powered earth flyby used in conjunction with a double lunar gravity assist is also discussed. This paper also examines return to the earth-moon system for a third lunar gravity assist and the payload gain that results. Use of these methods allows a spacecraft to depart earth with an energy less than that needed to escape and to proceed on to planetary encounters. Opportunities for travel to Mars using these methods are presented. Fairly regular opportunities exist that result in payload gain. The main problem is that launch windows are rather restrictive. Mission scenarios where this procedure may be useful are presented.
Topics in gravitational microlensing are examined. One issue is that even in cases in which the surface mass density is quite low, microlensing events cannot be considered as caused by individual stars. Whenever a high-magnification event occurs, the quasar has crossed a caustic. These caustics, however, are complex structures even for low surface-mass densities. This is illustrated by removing a single low-mass star from an ensemble of microlenses. The magnification patterns and light curves are compared with and without this star. The differences are striking and much more complex than expected. The effect of sparse sampling on the perception of microlensed light curves is examined, and attention is given to the influence of poor time coverage on simulated light curves. A regular monitoring program for microlensing candidates (especially 2237 + 0305) with a dedicated telescope is needed to make observations in different wavebands each night.
Engineers regularly analyze SSME ground test and flight data with respect to engine systems performance. Recently, a redesigned SSME powerhead was introduced to engine-level testing in part to increase engine operational margins through optimization of the engine internal environment. This paper presents an overview of the MSFC personnel engine systems analysis results and conclusions reached from initial engine level testing of the redesigned powerhead, and further redesigns incorporated to eliminate accelerated main injector baffle and main combustion chamber hot gas wall degradation. The conclusions are drawn from instrumented engine ground test data and hardware integrity analysis reports and address initial engine test results with respect to the apparent design change effects on engine system and component operation.
The reduction algorithm for systems with integrators is derived. The algorithm is based on balancing the antigrammians and has the same computational effectiveness as the regular balancing procedure. It was applied to the reduction of the NASA Deep Space Network antenna model. As a result, the 90-state model has been reduced to a 27-state model, which preserves the full-model properties.
Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that Stirling machines are capable of reliable and lengthy lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and were not expected to operate for any lengthy period of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered.
Consideration is given to the solar wind-magnetosphere interaction within the framework of deterministic nonlinear dynamics. An earlier dripping faucet analog model of the low-dimensional solar wind-magnetosphere system is reviewed, and a plasma physical counterpart to that model is constructed. A Faraday loop in the magnetotail is considered, and the relationship of electric potentials on the loop to changes in the magnetic flux threading the loop is developed. This approach leads to a model of geomagnetic activity which is similar to the earlier mechanical model but described in terms of the geometry and plasma contents of the magnetotail. The model is characterized as an elementary time-dependent global convection model. The convection evolves within a magnetotail shape that varies in a prescribed manner in response to the dynamical evolution of the convection. The result is a nonlinear model capable of exhibiting a transition from regular to chaotic loading and unloading. The model's behavior under steady loading and also some elementary forms of time-dependent loading is discussed.
Materials that issued from an unusual Venusian volcano produced (1) a complex domical structure about 100 km across with thick, broad flow lobes up to 41 wide, (2) an extensive sheet of thick flows, and (3) radar-bright surfaces that extend to 360-400 km from the volcano. Altimetry indicates that the relief of the domical structure is about 0.5-1.1 km. The lobes and flows have prominant regularly spaced ridges about 686-820 m apart. Thick flows with large ridge separations and broad lobes are rare on Venus. The viscosities of these flows were larger than those of most lava flows on Venus. Comparisons of the dimensions of the volcano's lobes with lava flows on earth suggest that the Venusian lavas may have large silica contents. Radar-bright surfaces around the volcano may represent the result of an explosive eruption or very thin deposits of low-viscosity lavas. Thus, the radar-bright surfaces and lavas of the volcano were derived from a magma that differentiated within the crust or mantle of Venus. The differentiation produced (1) a gas-rich low-viscosity phase, (2) high-viscosity lavas, and (3) a residual primary magma.
This paper evaluates a proposed hybrid analytical/numerical approach to launch-vehicle guidance for ascent to orbit injection. The feedback-guidance approach is based on a piecewise nearly analytic zero-order solution evaluated using a collocation method. The zero-order solution is then improved through a regular perturbation analysis, wherein the neglected dynamics are corrected in the first-order term. For real-time implementation, the guidance approach requires solving a set of small dimension nonlinear algebraic equations and performing quadrature. Assessment of performance and reliability are carried out through closed-loop simulation for a vertically launched 2-stage heavy-lift capacity vehicle to a low earth orbit. The solutions are compared with optimal solutions generated from a multiple shooting code. In the example the guidance approach delivers over 99.9 percent of optimal performance and terminal constraint accuracy.
An analysis is presented for a family of regular extremal attitude-maneuvers for the High Angle-of-Attack Research Vehicle that has thrust-vectoring capability. Different levels of dynamic coupling are identified in the combat aircraft attitude model, and the characteristic extremal-family motion is explained. It is shown why the extremal-family trajectories develop small sideslip-angles, a highly desirable feature from a practical viewpoint.
A significant amount of both qualitative and quantitative information about structures can be derived from the elastic-rigid structural coupling matrices, and from the effective modal inertias and masses. Typical finite-element analysis programs do not provide this information as part of the regular output. This report presents an easy way to develop the necessary information from ordinary program output, and shows how to deal with alternative origins for the reference coordinate system.
Test of the impact hypothesis for the origin of the circular, 260-km-diameter structure of the Bohemian Massif led to the discovery of glasses and breccias in the Upper Proterozoic sequence that can be compared to autogeneous breccias of larger craters. The black recrystallized glass contains small exsolution crystals of albite-oligoclase and biotite, regularly dispersed in the matrix recrystallized to quartz. The occurrence of these rocks is limited to a 1-sq-km area. It is directly underlain by the breccia of the pelitic and silty rocks cemented by the melted matrix, found on several tens of square kilometers. The melt has the same chemistry as rock fragments in major and in trace elements. It is slightly impoverished in water. The proportion of melted rocks to fragments varies from 1:5 to 10:1. The mineralogy of melt viens is the function of later, mostly contact metamorphism. On the contact of granitic plutons it abounds on sillimanite, cordierite, and small bullets of ilmenite. Immediately on the contact with syenodiorites it contains garnets. The metamorphism of the impact rock melt seems the most probable explanation of the mineralogy and the dry total fusion of rocks accompanied by the strong fragmentation. Other aspects of this investigation are discussed.
This report describes the design of an experiment for evaluating monolithic and composite material specimens in a high-temperature environment and subject to big thermal gradients. The material specimens will be exposed to aerothermal loads that correspond to thermally similar engine operating conditions. Materials evaluated in this study were monolithic nickel alloys and silicon carbide. In addition, composites such as tungsten/copper were evaluated. A facility to provide the test environment has been assembled in the Engine Research Building at the Lewis Research Center. The test section of the facility will permit both regular and Schlieren photography, thermal imaging, and laser Doppler anemometry. The test environment will be products of hydrogen-air combustion at temperatures from about 1200 F to as high as 4000 F. The test chamber pressure will vary up to 60 psia, and the free-stream flow velocity can reach Mach 0.9. The data collected will be used to validate thermal and stress analysis models of the specimen. This process of modeling, testing, and validation is expected to yield enhancements to existing analysis tools and techniques.
Distributed-memory parallel computers are increasingly being used to provide high levels of performance for scientific applications. Unfortunately, such machines are not very easy to program. A number of research efforts seek to alleviate this problem by developing compilers that take over the task of generating communication. The communication overheads and the extent of parallelism exploited in the resulting target program are determined largely by the manner in which data is partitioned across different processors of the machine. Most of the compilers provide no assistance to the programmer in the crucial task of determining a good data partitioning scheme. A novel approach is presented, the constraints-based approach, to the problem of automatic data partitioning for numeric programs. In this approach, the compiler identifies some desirable requirements on the distribution of various arrays being referenced in each statement, based on performance considerations. These desirable requirements are referred to as constraints. For each constraint, the compiler determines a quality measure that captures its importance with respect to the performance of the program. The quality measure is obtained through static performance estimation, without actually generating the target data-parallel program with explicit communication. Each data distribution decision is taken by combining all the relevant constraints. The compiler attempts to resolve any conflicts between constraints such that the overall execution time of the parallel program is minimized. This approach has been implemented as part of a compiler called Paradigm, that accepts Fortran 77 programs, and specifies the partitioning scheme to be used for each array in the program. We have obtained results on some programs taken from the Linpack and Eispack libraries, and the Perfect Benchmarks. These results are quite promising, and demonstrate the feasibility of automatic data partitioning for a significant class of scientific application programs with regular computations.