Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regional models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Updated Economic Model for Estimation of GDP Losses in the MACCS Offsite Consequence Analysis Code RDEIM Model Report for MACCS v4.2

This report updates the Regional Disruption Economic Impact Model (RDEIM) GDP-based model described in Bixler et al. (2020) used in the MACCS accident consequence analysis code. MACCS is the U.S. Nuclear Regulatory Commission (NRC) used to perform probabilistic health and economic consequence assessments for atmospheric releases of radionuclides. It is also used by international organizations, both reactor owners and regulators. It is intended and most commonly used for hypothetical accidents that could potentially occur in the future rather than to evaluate past accidents or to provide emergency response during an ongoing accident. It is designed to support probabilistic risk and consequence analyses and is used by the NRC, U.S. nuclear licensees, the Department of Energy, and international vendors, licensees, and regulators. The update of the RDEIM model in version 4.2 expresses the national recovery calculation explicitly, rather than implicitly as in the previous version. The calculation of the total national GDP losses remains unchanged. However, anticipated gains from recovery are now allocated across all the GDP loss types – direct, indirect, and induced – whereas in version 4.1, all recovery gains were accounted for in the indirect loss type. To achieve this, we’ve introduced new methodology to streamline and simplify the calculation of all types of losses and recovery. In addition, RDEIM includes other kinds of losses, including tangible wealth. This includes loss of tangible assets (e.g., depreciation) and accident expenditures (e.g., decontamination). This document describes the updated RDEIM economic model and provides examples of loss and recovery calculation, results analysis, and presentation. Changes to the tangible cost calculation and accident expenditures are described in section 2.2. The updates to the RDEIM input-output (I-O) model are not expected to affect the final benchmark results Bixler et al. (2020), as the RDEIM calculation for the total national GDP losses remains unchanged. The reader is referred to the MACCS revision history for other cost modelling changes since version 4.0 that may affect the benchmark. RDEIM has its roots in a code developed by Sandia National Laboratories for the Department of Homeland Security to estimate short-term losses from natural and manmade accidents, called the Regional Economic Accounting analysis tool (REAcct). This model was adapted and modified for MACCS. It is based on I-O theory, which is widely used in economic modeling. It accounts for direct losses to a disrupted region affected by an accident, indirect losses to the national economy due to disruption of the supply chain, and induced losses from reduced spending by displaced workers. RDEIM differs from REAcct in in its treatment and estimation of indirect loss multipliers, elimination of double-counting associated with inter-industry trade in the affected area, and that it is intended to be used for extended periods that can occur from a major nuclear reactor accident, such as the one that occurred at the Fukushima Daiichi site in Japan. Most input-output models do not account for economic adaptation and recovery, and in this regard RDEIM differs from its parent, REAcct, because it allows for a user-definable national recovery period. Implementation of a recovery period was one of several recommendations made by an independent peer review panel to ensure that RDEIM is state-of-practice. For this and several other reasons, RDEIM differs from REAcct.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1991

Magnetopause and cusp observations at Neptune

Plasma and magnetic field measurements in a subsolar cusp region of Neptune are compared with two current models of cusp regions, stemming from earth measurements: (1) a cusp region filled with stagnant plasma separated from the magnetosheath by a tangential discontinuity and (2) a mantle layer of dynamic plasma separated from the sheath by a rotational discontinuity. The plasma observations are more consistent with the mantle-layer interpretation. However, because of the particular trajectory of the Voyager 2 flyby, it was not possible to distinguish the mantle and the stagnant cusp models on geometrical grounds.

Szabo, Adam↗
NASA NTRS1982

Energy balance and stability

The energy balance of the outer atmospheres of solarlike stars is discussed. The energy balance of open coronal regions is considered, discussing the construction and characteristics of models of such regions in some detail. In particular, the temperature as a function of height is considered, as are the damping length dependence of the global energy balance in the region between the base of the transition region and the critical point, and the effects of changing the amount of coronal heating, the stellar mass, and the stellar radius. Models of coronal loops are more briefly discussed. The chromosphere is then included in the discussion of the energy balance, and the connection between global energy balance and global thermal stability is addressed. The observed positive correlations between the chromospheric and coronal energy losses and the pressure of the transition region is qualitatively explained.

Hammer, R.↗
NASA NTRS1992

Regional climates in the GISS global circulation model - Synoptic-scale circulation

A major weakness of current general circulation models (GCMs) is their perceived inability to predict reliably the regional consequences of a global-scale change, and it is these regional-scale predictions that are necessary for studies of human-environmental response. For large areas of the extratropics, the local climate is controlled by the synoptic-scale atmospheric circulation, and it is the purpose of this paper to evaluate the synoptic-scale circulation of the Goddard Institute for Space Studies (GISS) GCM. A methodology for validating the daily synoptic circulation using Principal Component Analysis is described, and the methodology is then applied to the GCM simulation of sea level pressure over the continental United States (excluding Alaska). The analysis demonstrates that the GISS 4 x 5 deg GCM Model II effectively simulates the synoptic-scale atmospheric circulation over the United States. The modes of variance describing the atmospheric circulation of the model are comparable to those found in the observed data, and these modes explain similar amounts of variance in their respective datasets. The temporal behavior of these circulation modes in the synoptic time frame are also comparable.

Hewitson, B.↗
DOE OSTI2023

Region and cloud regime dependence of parametric sensitivity in E3SM atmosphere model

Abstract The Department of Energy (DOE)’s Energy Exascale Earth System Model (E3SM), including its atmosphere model (EAM), has many relatively new features. In a previous study we conducted a systematic parametric sensitivity analysis for EAM based on short, perturbed parameter ensemble (PPE) simulations, mainly focusing on global mean climate features and metrics. While parameter values in global climate models are generally invariant in space and time, model response to parameters perturbation may vary by regions and climate regimes, which motivates the need to better understand the EAM model behaviors and physics at regional scale and process level. In this study, using the same set of PPE simulations and a similar sensitivity analysis framework, we identify parameters that cause largest sensitivities over different regions and compare model responses in fast atmospheric processes to the parameters across different cloud regimes for several important cloud-related fidelity metrics. We find that cloud forcing has opposite response to some parameters over mid-latitude vs. tropical land. We also analyze how the parametric sensitivity varies as stratocumulus transitions to shallow convection and to deep convection over ocean. Low cloud forcing and shortwave cloud forcing in the subtropical eastern Pacific are most sensitive to the parameters controlling the width of the probability density function (PDF) of the subgrid vertical velocity ( w’ ) ( gamma ) and the damping of the w’ skewness ( c8 ) near the coast but become more sensitive to the parameter affecting the damping of the w’ variance ( c1 ) further offshore. Detailed interpretation of the spatial dependence of parametric sensitivity is provided. We also investigate how the parametric sensitivity evolves with prediction duration. This study improves our process-level understanding of cloud physics and parameterization and provides insights for developing more advanced regime-aware parameterization schemes in global climate model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Transit Rider/Travel Behavior Inventory Survey - Minneapolis-St. Paul Metro - 2005

The survey was an on-board survey of transit riders on all regular route services for bus and light-rail in the Minneapolis-Saint Paul metropolitan area. The primary purpose of the study was to gather the data needed to update the mode choice models that are an integral component of the regional travel forecast model maintained by the Metropolitan Council, the metropolitan planning organization for the Minneapolis-Saint Paul metropolitan area. The survey instrument focused on identifying characteristics of the trip taken by each transit rider, including origin, destination, trip purpose, and mode of access. The survey also collected relevant socioeconomic and demographic information.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1988

Dependence of warm and cold climate depiction on climate model resolution

Climate change simulations run with two different resolutions (8 deg by 10 deg and 4 deg by 5 deg) of the NASA Goddard Institute for Space Studies model are used to investigate radiative, dynamical, and regional sensitivities to model grid size. The results show that model resolution affected two key processes in the control runs, moist convection and the nonlinear transfer of kinetic energy into the zonal mean flow. It was found that the finer resolution model has more penetrative convection but less convection overall, with the results that its temperature and wind structure were altered with respect to the coarser grid model.

Rind, David↗
NASA NTRS1994

Steepened structures in equatorial spread F. 2: Theory

This paper investigates the properties of a one-dimensional fluid model of plasma convection in the equatorial F region ionosphere. The model equations are similar in form to Burgers equation except for additional higher-order spatial derivatives. Like Burgers equation, solution to the model have the form of propagating, shocklike structures. Numerical simulations of the model closely resemble the steepened structures observed by sounding rocket plasma density probes within equatorial spread F. Simulated denstiy power spectra, like the spectra computed from in situ data, seem to possess power law forms with a break at wavelengths of about 100 m. The precise wavenumber of the spectral break is determined by the ambipolar diffusion coefficient. The model predicts that electric field fluctuations perpendicular to the direction of plasma steepening should be proportional to the plasma density fluctuations. Electric field fluctuations parallel to the steepening will be due primarily to the ambipolar field and have a Boltzmann relationship with density (square of the absolute value of delta E) approximately equal to (K(exp 2))(square of the absolute value of (delta n/n)). At wavelengths less than about 300 m, the ambipolar field should be the dominant component of the total field intensity.

Hysell, D. L↗
NASA NTRS2006

Bearing-Load Modeling and Analysis Study for Mechanically Connected Structures

Bearing-load response for a pin-loaded hole is studied within the context of two-dimensional finite element analyses. Pin-loaded-hole configurations are representative of mechanically connected structures, such as a stiffener fastened to a rib of an isogrid panel, that are idealized as part of a larger structural component. Within this context, the larger structural component may be idealized as a two-dimensional shell finite element model to identify load paths and high stress regions. Finite element modeling and analysis aspects of a pin-loaded hole are considered in the present paper including the use of linear and nonlinear springs to simulate the pin-bearing contact condition. Simulating pin-connected structures within a two-dimensional finite element analysis model using nonlinear spring or gap elements provides an effective way for accurate prediction of the local effective stress state and peak forces.

Knight, Norman F., Jr.↗
DOE OSTI2024

China's plug-in hybrid electric vehicle transition: An operational carbon perspective

Assessing the emissions of plug-in hybrid electric vehicle (PHEV) operations is crucial for accelerating the carbon–neutral transition in the passenger car sector. This study is the first to adopt a bottom-up model to measure the real-world energy use and carbon dioxide emissions of China’s top twenty selling PHEV models across different regions from 2020 to 2022. The results indicate that (1) the actual electricity intensity of the best-selling PHEV models (20.2–38.2 kWh/100 km) was 30–40 % higher than the New European Driving Cycle values, and the actual gasoline intensity (4.7–23.5 L/100 km) was 3–6 times greater than the New European Driving Cycle values. (2) The overall energy use of the best-selling models varied among different regions, and the energy use from 2020 to 2022 in Southern China was double that Northern China and the Yangtze River Middle Reach. (3) The top-selling models emitted 4.7 megatons of carbon dioxide nationwide from 2020 to 2022, with 1.9 megatons released by electricity consumption and 2.8 megatons released by gasoline combustion. Furthermore, targeted policy implications for expediting the carbon–neutral transition within the passenger car sector are proposed. In essence, this study explores and compares benchmark data at both the national and regional levels, along with performance metrics associated with PHEV operations. The main objective is to aid nationwide decarbonization efforts, focusing on carbon reduction and promoting the rapid transition of road transportation toward a net-zero carbon future.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1983

Analysis of MAGSAT and surface data of the Indian region

Techniques and significant results of an analysis of MAGSAT and surface data of the Indian region are described. Specific investigative tasks included: (1) use of the multilevel data at different altitudes to develop a model for variation of magnetic anomaly with altitude; (2) development of the regional model for the description of main geomagnetic field for the Indian sub-continent using MAGSAT and observatory data; (3) development of regional mathematical model of secular variations over the Indian sub-continent; and (4) downward continuation of the anomaly field obtained from MAGSAT and its combination with the existing observatory data to produce a regional anomaly map for elucidating tectonic features of the Indian sub-continent.

Agarwal, G. C.↗
NASA NTRS1988

Computational Fluid Mechanics

A one-equation turbulence model based on the turbulent kinetic energy equation is presented. The model is motivated by the success of the Johnson-King model and incorporates a number of features uncovered by Simpson's experiments on separated flows. Based on the results obtained, the model duplicates the success of algebraic models in attached flow regions and outperforms the two-equation models in detached flow regions.

Hassan, H. A.↗
DOE OSTI2025

Mid-Atlantic US observations of radiocarbon in CO 2 : fossil and biogenic source partitioning and model evaluation

Accurately quantifying regional anthropogenic CO 2 fluxes is fundamental to improving our understanding of the carbon cycle and for creating effective carbon mitigation policies, and the radiocarbon to total carbon ratio in atmospheric CO 2 (Δ 14 CO 2 ) is a robust tracer of fossil fuel CO 2 that can discriminate between biogenic and fossil fuel CO 2 sources. NASA's Atmospheric Carbon and Transport-America (ACT-America) airborne mission between 2016 and 2019 aimed to improve the accuracy of regional greenhouse gas flux estimates, through refining our understanding and characterization of fluxes and flux uncertainties in models. Δ 14 CO 2 observations from 26 flights are presented for examining seasonal CO 2 source partitioning in the Mid-Atlantic USA. Observed variability in boundary layer CO 2 at timescales ranging from intra-day to seasonal was largely driven by biogenic CO 2 (CO 2bio ) variability that ranged from −19.7 ppm in summer to 16.2 ppm in fall, while fossil fuel CO 2 (CO 2ff ) variability remained at 3.3±2.0 ppm. Carbonyl sulfide uptake was well-correlated with CO 2bio uptake, and examining this relationship, as well as that between CO 2 and CO 2bio variability reinforces the seasonal extent of gross primary productivity response throughout ACT-America. We use airborne Δ 14 CO 2 flask sampling alongside in situ carbon monoxide measurements to calculate high-frequency CO 2ff and evaluate the magnitude and diurnal variability of modeled CO 2ff , deducing likely transport errors in an example flight. Although ACT-America CO 2ff signals were attenuated due to the broad source regions sampled, results illustrate the value of Δ 14 CO 2 sampling and observation-based methodologies for regional CO 2 flux attribution, evaluation and improvement of modeled CO 2 .

Baier, Bianca C. [National Oceanic and Atmospheric↗
DOE OSTI2021

Integrating AI with physics-based hydrological models and observations for insightinto changing climate and anthropogenic impacts

Focal Areas: Advanced computational methods that integrate AI, physics, and observations to provide predictive landscape hydrological modeling over large areas (regional, continental, worldwide) while incorporating increasingly available high-resolution data from drones, lidar and satellite. Science Challenge: Landscape data is available at finer scales than can be used in physics-based hydrological (PBH) models for regional or continental terrestrial water modeling. Thus, we throw away observable detail to achieve computability. We argue that integration of AI with PBH models and observed data can be used to provide upscaling for predictive models that are computable, retain physical conservation properties, and represent the fine-scale features that affect complex flow physics through both natural and urban environments. Developing such next-generation capabilities requires outside-the-box thinking that melds the different approaches of AI modeling, PBH modeling, and observation across multiple scales from local drones to satellites.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Modeling of G333.6-0.2 as a spherical H II region

The radio and IR observations of the H II region G333.6-0.2 are matched with a detailed spherical model with a density distribution which has a uniform-density core of radius 0.05 pc, a power-law intermediate zone, and a uniform-density halo. A stellar radiation field is required that is somewhat different from those predicted by available model atmospheres. Of the stellar models of Kurucz, the Teff = 34,000 K and log g = 3.5 model best fits the observed ratio of helium to hydrogen recombination lines. A good fit to all the observations in obtained with an S(2+) ionizing flux which is a factor of 20 times less than predicted by the Kurucz atmosphere. Current model atmospheres may not be appropriate because a single stable star with Teff = 34,000 K fails by at least an order of magnitude to produce the ionizing luminosity. The small radius of the constant-density core implies a short dynamical lifetime of approximately 5000 years for this spherical model; this may indicate that a nonspherical blister geometry is more appropriate for this H II region.

Rubin, R. H.↗
DOE OSTI2020

Spring 2020 Dissertation Update [Slides]

An update is provided on the dissertation underway and what has been learned thus far. Work thus far: Developed analytic models for each region in the spent fuel cask – Used to identify and explain physical processes which create features in detailed casks; Developed simplified computational models to identify details not seen in analytic models; SC were calculated in the fuel region; The difference in SC’s between the analytic model and the simplified computational model were identified. Outstanding issues: Analysis of analytic models in stainless steel and carbon steel – These materials are thin and have few features (just the slope); Discrepancies between absorption SC’s in fuel; Create a test problem to show the effects of the high energy resonances in the fuel region. Future Work: Sensitivity analysis needs to be continued through the cask – The detailed model will be added to the remaining materials; Sensitivity analysis paper; and, Addressing outstanding issues.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Vacuum Neutral Transport Model in UEDGE for Tokamak Far Scrape‐Off Layer

A model for neutral transport in the far scrape-off layer (SOL) vacuum region (vacuum neutral model) has been developed and implemented in UEDGE. Free-streaming neutral trajectories between the outermost UEDGE boundary and the vessel wall are preprocessed using DEGAS2 to construct a tele-transport matrix that captures non-local neutral relocation through the vacuum. Here, this matrix is then used in UEDGE as a non-local boundary condition for the neutral equations, preserving the robustness and convergence of the implicit solver without introducing statistical noise. Simulations of a DIII-D lower single-null configuration show that the vacuum neutral model relocates neutrals from the divertor to the upstream region, increasing the outer midplane separatrix density required for detachment onset by about 30%. However, the characteristic target temperature at detachment (T e, osp ~ 3 - 4eV) and the radiation front behavior remain unchanged.

DEGAS2↗
DOE OSTI2024

Comparison of Results between the Legacy and Refined RELAP5-3D Models of the High Temperature Test Facility in Exercises 1 and 2 of the HTTF Benchmark

Work conducted in FY23 identified that RELAP5-3D was capable of reproducing trends in HTTF data during experiment PG-27 but was incapable of reproducing measured values. The primary cause of this discrepancy between RELAP5-3D results and experimental data was hypothesized to be a distortion in power density that was introduced by the radial nodalization of the model. We further hypothesized that a new model would provide better results when compared to the experiments PG-27 and PG-29. Work this FY developed a new model that is better capable of capturing local heat generation rates and contains a representation of each 1/6 azimuthal sector of the core. We used this model to develop a new set of solutions to Exercises 1 and 2 of Problems 2 and 3 in the benchmark. In this report, we present the first comprehensive comparison of the results between the two models. We see that in Exercise 1A, which is common between problems 2 and 3, the results are similar, though the results from the new model show greater detail than those from the legacy model. In Problem 2 Exercise 1B and Problem 3 Exercise 1B, we see that heat removal is slower in the new model than the legacy model. Problem 3 Exercise 1C shows temperatures that are lower in most places in the new model than the legacy model, but the area with active heat generation has higher block temperatures in the new model than the legacy model. Problem 3 Exercise 1D further shows that long-term heat removal is lower in the new model. Problem 2 Exercise 1C demonstrated that the new model observes higher temperatures in the core regions than the legacy model, justifying the need to preserve the power density in HTTF. The validation of PG-27 and PG-29 also demonstrated the improved temperature agreement in the core regions, particularly with a calibrated model that implements an effective thermal conductivity for the core material. Overall, PG-27 models show reasonable to excellent agreement for steady-state temperatures and minimal to reasonable agreement for transients. PG-29 models showed minimal to insufficient agreement with the data.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗