Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1954

A Procedure for the Design of Air-Heated Ice-Prevention Systems

A procedure proposed for use in the design of air-heated systems for the continuous prevention of ice formation on airplane components is set forth. Required heat-transfer and air-pressure-loss equations are presented, and methods of selecting appropriate meteorological conditions for flight over specified geographical areas and for the calculation of water-drop-impingement characteristics are suggested. In order to facilitate the design, a simple electrical analogue was devised which solves the complex heat-transfer relationships existing in the thermal-system analysis. The analogue is described and an illustration of its application to design is given.

Neel, C. B.↗
NASA NTRS1981

Use of ordination and classification procedures to evaluate phytoplankton communities during Superflux II

Cluster analysis and an ordination procedure were performed on two data matrices to investigate real and environmental spatial relationships. Multiple regression analysis was used to relate the measured environmental variables to the phytoplankton community changes. Qualitative type phytoplankton data proved to be less structured in both of these spaces, relative to the biomass data. The salinity gradients of the northern transects covaried significantly with the phytoplankton association changes. In the southern transects the light variable was most important in explaining the variance in the ordination axes. These data suggest the close relationships between phytoplankton community changes and the physical hydrology of the area.

Rutledge, C. K.↗
NASA NTRS1981

SEPAC software configuration control plan and procedures, revision 1

SEPAC Software Configuration Control Plan and Procedures are presented. The objective of the software configuration control is to establish the process for maintaining configuration control of the SEPAC software beginning with the baselining of SEPAC Flight Software Version 1 and encompass the integration and verification tests through Spacelab Level IV Integration. They are designed to provide a simplified but complete configuration control process. The intent is to require a minimum amount of paperwork but provide total traceability of SEPAC software.

Source record↗
NASA NTRS1981

Fiscal year 1980-81 implementation plan in support of technical development and integration of sampling and aggregation procedures

The specific objectives of the FY 1980-81 tasks are: (1) further refinements to the weighted aggregation procedure; (2) improved approaches for estimating within-stratum variance; (3) more intensive investigation of alternative sampling strategies such as full-frame sampling strategy, and (4) further developments in regard to a simulated approach for assessing the performance of the overall designed sampling and aggregation system.

Source record↗
NASA NTRS1981

Operational procedures relative to severe weather

Severe weather impact on both safety and the economics of all types of aviation, and reduction of elimination are discussed. The functions and responsibilities of the dispatcher are outlined. All surface weather reports showing inclement weather, SIGMET REPORTS, forecasting turbulence or icing, convective SIGMETS: (1) tornadoes; (2) hail 3/4 of an inch or greater; (3) imbedded thunderstorms; (4) squall lines or (5) an area of level four or greater thunderstorms. This information along with PIREPs of severe weather are relayed to affected flights. It is concluded that operational procedures must be timely and well conceived to assure the least amount of impact on airline operations.

Sullivan, J. F.↗
NASA NTRS1981

Development of a simplified procedure for thrust chamber life prediction

An analytical design procedure for predicting thrust chamber life considering cyclically induced thinning and bulging of the hot gas wall is developed. The hot gas wall, composed of ligaments connecting adjacent cooling channel ribs and separating the coolant flow from the combustion gas, is subjected to pressure loading and severe thermal cycling. Thermal transients during start up and shut down cause plastic straining through the ligaments. The primary bending stress superimposed on the alternate in-plane cyclic straining causes incremental bulging of the ligaments during each firing cycle. This basic mechanism of plastic ratcheting is analyzed and a method developed for determining ligament deformation and strain. The method uses a yield surface for combined bending and membrane loading to determine the incremental permanent deflection and pregressive thinning near the center of the ligaments which cause the geometry of the ligaments to change as the incremental strains accumulate. Fatigue and tensile instability are affected by these local geometry changes. Both are analyzed and a failure criterion developed.

Porowski, J. S.↗
NASA NTRS1981

Evaluation of the procedure 1A component of the 1980 US/Canada wheat and barley exploratory experiment

Several techniques which use clusters generated by a new clustering algorithm, CLASSY, are proposed as alternatives to random sampling to obtain greater precision in crop proportion estimation: (1) Proportional Allocation/relative count estimator (PA/RCE) uses proportional allocation of dots to clusters on the basis of cluster size and a relative count cluster level estimate; (2) Proportional Allocation/Bayes Estimator (PA/BE) uses proportional allocation of dots to clusters and a Bayesian cluster-level estimate; and (3) Bayes Sequential Allocation/Bayesian Estimator (BSA/BE) uses sequential allocation of dots to clusters and a Bayesian cluster level estimate. Clustering in an effective method in making proportion estimates. It is estimated that, to obtain the same precision with random sampling as obtained by the proportional sampling of 50 dots with an unbiased estimator, samples of 85 or 166 would need to be taken if dot sets with AI labels (integrated procedure) or ground truth labels, respectively were input. Dot reallocation provides dot sets that are unbiased. It is recommended that these proportion estimation techniques are maintained, particularly the PA/BE because it provides the greatest precision.

Chapman, G. M.↗
NASA NTRS1982

Report on the subpanel on remapping procedures

Problems associated with remapping procedures are defined and research tasks are proposed. It is noted that the remapping/rectification process could be significantly aided through engineering systems improvements in attitude control, with subsequent improvement in spacecraft ephemeris modeling accuracy. There is a need for state-of-the-art technology assessments prior to initiation of major programs, and the high potential return from well formulated testing of algorithms on selected data sets of actual and synthetic imagery. In addition, there is a need for tasks that incorporate standard photogrammetric methodology and formulas and that more fully utilize platform and calibration data from current and proposed sensors to reproject digital imagery. The impact of improved platform stability and integration of global positioning system measurements on reduced ground segment processing needs to be critically assessed. Also highlighted is the need for a substantial effort in the development of remapping software and systems that are modular and transportable.

Source record↗
NASA NTRS1981

Incorporating partially identified sample segments into acreage estimation procedures: Estimates using only observations from the current year

Several methods of estimating individual crop acreages using a mixture of completely identified and partially identified (generic) segments from a single growing year are derived and discussed. A small Monte Carlo study of eight estimators is presented. The relative empirical behavior of these estimators is discussed as are the effects of segment sample size and amount of partial identification. The principle recommendations are (1) to not exclude, but rather incorporate partially identified sample segments into the estimation procedure, (2) try to avoid having a large percentage (say 80%) of only partially identified segments, in the sample, and (3) use the maximum likelihood estimator although the weighted least squares estimator and least squares ratio estimator both perform almost as well. Sets of spring small grains (North Dakota) data were used.

Sielken, R. L., Jr.↗
NASA NTRS1981

A moisture analysis procedure utilizing surface and satellite data

Four analyses have been produced by a moisture analysis procedure which uses satellite, precipitation and surface specific humidity data to augment the standard radiosonde observations (RAOB) of moisture: (1) using RAOB data only, (2) using RAOB data supplemented by data obtained from the surface observations of specific humidity, (3) using RAOB data supplemented only by satellite and precipitation data, and (4) employing all sources of data. Penn State University Mesoscale Model forecasts were performed to determine the effect of the high-resolution moisture analyses. For the data set used, supplementary satellite and rainfall data was found to improve the precipitation forecast more than surface humidity data and permitted the model to produce rain rates during the first four hours of the forecast that were 100% larger and more realistic than those produced without these data.

Wolcott, S. W.↗
NASA NTRS1982

A simple finite difference procedure for the vortex controlled diffuser

A simple prediction procedure for sudden expansion incompressible flows is developed and applied to the vortex controlled diffuser. Transient Navier-Stokes equations of an incompressible fluid are solved by means of their associated finite difference equations in terms of the primitive pressure velocity variables. A computer code is developed using a laminar flow simulation with free slip or no slip wall boundary conditions. In addition, predicted results confirm that effectiveness increases with increases in duct length and bleed flow rate

Busnaina, A. A.↗
NASA NTRS1980

Search and rescue emergency locating transmitter detection/location procedure via TIROS satellite

A procedure is described which works effectively to detect and locate emergency locating transmitters (ELTs) and emergency position indicating radio beacons (EPIRBs) in a multisignal environment. Using data generated from several manufactured ELTs with diverse superimposed Doppler curves, as many as 9 simultaneous ELTs can be detected and located at a variety of signal strengths. It is noted that average position errors of 10 km are attainable today at signal power to noise spectral density ratios as low as 17 dB-Hz.

Wren, P. E.↗
NASA NTRS1982

A composite velocity procedure for the compressible Navier-Stokes equations

A new boundary-layer relaxation procedure is presented. In the spirit of the theory of matched asymptotic expansions, a multiplicative composite of the appropriate velocity representations for the inviscid and viscous regions is prescribed. The resulting equations are structured so that far from the surface of the body the momentum equations lead to the Bernoulli relation for the pressure, while the continuity equation reduces to the familiar compressible potential equation. Close to the body surface, the governing equations and solution techniques are characteristic of those describing interacting boundary-layers; although, the full Navier-Stokes equations are considered here. Laminar flow calculations for the subsonic flow over an axisymmetric boattail simulator geometry are presented for a variety of Reynolds and Mach numbers. A strongly implicit solution method is applied for the coupled velocity components.

Khosla, P. K.↗
NASA NTRS1982

A simplified design procedure for life prediction of rocket thrust chambers

An analytical procedure for predicting thrust chamber life is developed. The hot-gas-wall ligaments separating the coolant and combustion gas are subjected to pressure loading and severe thermal cycling. The resulting stresses interact during plastic straining causing incremental bulging of the ligaments during each firing cycle. This mechanism of plastic ratcheting is analyzed and a method using a yield surface for combined bending and membrane loading developed for determining the incremental permanent deflection and progressive thinning near the center of the ligaments. Fatigue and tensile instability are analyzed as possible failure modes. Results of the simplified analyses compare favorably with available experimental data and finite element analysis results for OFHC (Oxygen Free High Conductivity) copper. They are also in reasonably good agreement with experimental data for NARloy Z, a copper-zirconium-silver alloy developed by the Rocketdyne Division of Rockwell International.

Porowski, J. S.↗
NASA NTRS1981

On the procedure for deriving ozone variations from satellite observations

It is noted that for the years 1970-1972 global ozone may be calculated by using extrapolated values for polar night regions and then deriving direct daily averages. After 1972, regions larger than the polar night often lack data, increasing the error of extrapolation. It is shown that problems of this type can be overcome by using zonal averages, calculating the annual wave through harmonic analysis, and subtracting the annual wave so derived. Linear fits can then be employed to obtain long-term zonal changes and yearly zonal averages. Global results can be derived in the form of an area-weighted average of the zonal results. It is pointed out that no values need be assumed for ozone when data are lacking. The uncertainty from this procedure is estimated at + or - 0.4% of the yearly average. However, other uncertainties in the backscatter ultraviolet experiment may be larger.

Schlesinger, B. M.↗
NASA NTRS1981

An efficient procedure for scheduling packets in a multibeam satellite-switched TDMA system

A satellite-switched, multi-beam system using N sub T transponders is considered, in which a large number of ground stations are distributed over N sub Z (not less than N sub T) zones. Each station transmits information digitally in a packet-switched time division multiple access mode, with all packets of fixed length. A demand-assigned packet scheduling procedure is described which achieves high throughput with relatively low average time delay, adapts easily to fluctuating demand from individual earth stations, and automatically schedules transmissions to avoid adjacent zone interference.

Stern, T. E.↗
NASA NTRS1982

Approximate boundary condition procedure for the two-dimensional numerical solution of vortex wakes

Research on efficient computational methods for general vorticity fields has been conducted in connection with a need for basic research on vortex-dominated flows. The present investigation is concerned with the evolution of vortex wakes behind aircraft wings. An efficient procedure is presented for the calculation of the boundary values used in the numerical solution of the unsteady, incompressible, two-dimensional Navier-Stokes equations for an unbounded flow field. The extent of the computational grid can be reduced compared to methods utilizing standard boundary conditions, without loss of accuracy. The efficiencies realized make it feasible to calculate the vortex wake development for realistic wing configurations, including the merging of multiple vortices, for Reynolds numbers of about 10,000 based on wing chord.

Weston, R. P.↗
NASA NTRS1982

Incompressible Navier-Stokes and parabolized Navier-Stokes solution procedures and computational techniques

Recent developments with finite-difference techniques are emphasized. The quotation marks reflect the fact that any finite discretization procedure can be included in this category. Many so-called finite element collocation and galerkin methods can be reproduced by appropriate forms of the differential equations and discretization formulas. Many of the difficulties encountered in early Navier-Stokes calculations were inherent not only in the choice of the different equations (accuracy), but also in the method of solution or choice of algorithm (convergence and stability, in the manner in which the dependent variables or discretized equations are related (coupling), in the manner that boundary conditions are applied, in the manner that the coordinate mesh is specified (grid generation), and finally, in recognizing that for many high Reynolds number flows not all contributions to the Navier-Stokes equations are necessarily of equal importance (parabolization, preferred direction, pressure interaction, asymptotic and mathematical character). It is these elements that are reviewed. Several Navier-Stokes and parabolized Navier-Stokes formulations are also presented.

Rubin, S. G.↗