SEARCH · Engineering Papers

Results for “parameter sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

All sources NASA NTRS DOE OSTI

NASA NTRS1973

An evaluation of space acquired data as a tool for management to wildlife habitat in Alaska

The Bureau of Sport Fisheries and Wildlife ERTS experiment in Alaska attempts to yield information useful for three primary functions in the State. They are: (1) to test the feasibility of using ERTS data, in conjunction with aircraft acquired multispectral photography, to develop effective stratified sampling techniques, (2) to provide near real time assessment and evaluation of the quantity, quality, and distribution of waterfowl breeding habitat through frequent ERTS measurements of hydrologic, phenological and vegetational parameters, and (3) to provide basic mapping of vegetation and terrain in certain remote areas of the State for which little or no biological data now exist.

Vantries, B. J.↗

NASA NTRS1979

Weighting in digital synthetic aperture radar processing

Weighting is employed in synthetic aperture radar (SAR) processing to reduce the sidelobe response at the expense of peak center response height and mainlobe resolution. The weighting effectiveness in digital processing depends not only on the choice of weighting function, but on the fineness of sampling and quantization, on the time bandwidth product, on the quadratic phase error, and on the azimuth antenna pattern. The results of simulations conducted to uncover the effect of these parameters on azimuth weighting effectiveness are presented. In particular, it is shown that multilook capabilities of future SAR systems may obviate the need for consideration of the antenna pattern, and that azimuth time-bandwidth products of over 200 are probably required before the digital results begin to approach the ideal results.

Dicenzo, A.↗

NASA NTRS1982

Adsorption and excess fission xenon

The adsorption of Xe and Kr on lunar soil 10084 was measured by a method that employs only very low fractions of monolayer coverage. Results are presented as parameters for calculation of the Henry constant for adsorption as a function of temperature. The adsorption potentials are about 3 kcal/mole for Kr and 5 kcal/mole for Xe; heating the sample in vacuum increased the Xe potential to nearly 7 kcal/mole. Henry constants at the characteristic lunar temperature are about 0.3 cu cm STP/g-atm. These data were applied to consider whether adsorption is important in producing the excess fission Xe effect characteristic of highland breccias. Sorption equilibrium with a transient lunar atmosphere vented fission Xe produces concentrations seven orders of magnitude lower than observed concentrations. Higher concentrations result because of the resistance of the regolith to upward diffusion of Xe. A diffusion coefficient of 0.26 sq cm/sec is estimated for this process.

Podosek, F. A.↗

NASA NTRS1983

Radar observations of inertial period waves in the lower stratosphere over Arecibo

Several hundred hours of wind velocity measurements made with the Arecibo 430-MHz radar during the past few years have indicated the presence of persistent wave like structures just above the tropopause. To further investigate these structures, a nearly continuous times series of wind measurements in the upper troposphere and lower stratosphere was made from May 5 to May 12, 1982 at Arecibo. Each of 16 compass points was sampled as the 430-MHz feed was rotated in a velocity azimuth display (VAD) mode at a zenith angle of 15 degrees off-vertical. Using a nonlinear least squares parameter estimation technique line of sight velocities were calculated from Doppler shifts of the received spectra. These velocities were reduced to zonal and meridional components of the wind vector; the vertical component of the wind vector will be available after further reduction.

Cornish, C. R.↗

NASA NTRS1984

Estimation of coefficients and boundary parameters in hyperbolic systems

Semi-discrete Galerkin approximation schemes are considered in connection with inverse problems for the estimation of spatially varying coefficients and boundary condition parameters in second order hyperbolic systems typical of those arising in 1-D surface seismic problems. Spline based algorithms are proposed for which theoretical convergence results along with a representative sample of numerical findings are given.

Banks, H. T.↗

NASA NTRS1987

A Modal-Parameter Extraction Procedure

Procedure accommodates multiple input excitations. Improved modalparameter extraction procedure applicable to linear, time-invariant systems derived in 92-page report. Algorithm allows multiple noncoherent input excitations applied to structure and generates consistent set of modal parameters. Procedure extension of simultaneous frequency-domain (SFD) techniques achieved through investigation of two automatic methods for reducing effective problem size while minimizing amount of user interaction. In several sample runs, independentcoordinate reduction method shown more accurate method for small sample size. Principle-component method used to estimate number of modes active in given frequency range.

Kurdila, A. H.↗

NASA NTRS1990

Dynamics of groups around interacting double ellipticals: Measuring dark matter haloes

Binary galaxies, as binary stars, are important to measure masses, as suggested by Page (1952). Because three orbit parameters are measurable for galaxies at one instant of time, severe uncertainties remain in the orbit and mass determinations. These uncertainties can partly be overcome by statistical studies of selected samples and/or n-body simulations. Close double galaxies (and isolated galaxies) could also be useful to estimate dynamical masses if we can find test particles around them. Interacting elliptical pairs or dumb-bell galaxies are found with a large range, between 0-1200 km s(exp -1), of relative radial velocities. Standard 2-body orbit calculations, highly uncertain due to projection factors, suggest for the largest velocity differences very large galaxy masses, if the systems are bound and stationary. However, recent n-body simulations model these binaries as galaxies captured from hyperbolic orbits, requiring masses of order a few times 10(exp 11) solar maximum (Borne et al. 1988), but producing systems that are short lived. A different picture appears when we study observationally the dynamical mass of interacting double ellipticals using faint satellite galaxies. These satellites contribute little luminosity and, presumably, little mass to the system. The authors present results of two such groups, basically forming systems of test particles, around the dumb-bells NGC 4782/3 and IC 5049. They also briefly discuss the satellite group around the central dumb-bell in the cluster Sersic 40/6. Apparently, they detect large quantities of dark matter in the vicinity of these dumb-bell galaxies, because the system masses of approx. 4.5 times 10(exp 13) solar mass and 8 times 10(exp 13) solar mass for NGC 4782/3 and IC 5049, respectively, are quite high. Likewise, the mass of the Sersic 40/6 inner core is 7 times 10(exp 13) solar mass. The possibility that a common massive dark matter halo increases the merging times of these types of galaxies is suggested. Here, the authors assume H sub o = 100 km s (exp -1) Mpc(exp -1).

Quintana, H.↗

NASA NTRS1994

A comparative study of clock rate and drift estimation

Five different methods of drift determination and four different methods of rate determination were compared using months of hourly phase and frequency data from a sample of cesium clocks and active hydrogen masers. Linear least squares on frequency is selected as the optimal method of determining both drift and rate, more on the basis of parameter parsimony and confidence measures than on random and systematic errors.

Breakiron, Lee A.↗

NASA NTRS1994

Tracking strategies for laser ranging to multiple satellite targets

By the middle of the decade, several new Laser Geodynamic Satellites will be launched to join the current constellation comprised of the laser geodynamic satellite (LAGEOS) (US), Starlette (France), Ajisai (Japan), and Etalon I and II (USSR). The satellites to be launched, LAGEOS II and III (US & Italy), and Stella (France), will be injected into orbits that differ from the existing constellation so that geodetic and gravimetric quantities are sampled to enhance their resolution and accuracy. An examination of various possible tracking strategies adopted by the network of laser tracking stations has revealed that the recovery of precise geodetic parameters can be obtained over shorter intervals than is currently obtainable with the present constellation of satellites. This is particularly important in the planning of mobile laser tracking operations, given a network of permanently operating tracking sites. Through simulations, it is shown that laser tracking of certain satellite passes, pre-selected to provide optimal sky-coverage, provides the means to acquire a sufficient amount of data to allow the recovery of 1 cm station positions.

Robbins, J. W.↗

NASA NTRS1995

NSTAR Ion Thruster Plume Impact Assessments

Tests were performed to establish 30-cm ion thruster plume impacts, including plume characterizations via near and farfield ion current measurements, contamination, and sputtering assessments. Current density measurements show that 95% of the beam was enclosed within a 22 deg half-angle and that the thrust vector shifted by less than 0.3 deg during throttling from 2.3 to 0.5 kW. The beam flatness parameter was found to be 0.47, and the ratio of doubly charged to singly charged ion current density decreased from 15% at 2.3 kW to 5% at 0.5 kW. Quartz sample erosion measurements showed that the samples eroded at a rate of between 11 and 13 pm/khr at 25 deg from the thruster axis, and that the rate dropped by a factor of four at 40 deg. Good agreement was obtained between extrapolated current densities and those calculated from tantalum target erosion measurements. Quartz crystal microbalance and witness plate measurements showed that ion beam sputtering of the tank resulted in a facility material backflux rate of -10 A/hr in a large space simulation chamber.

Myers, Roger M.↗

NASA NTRS1995

NASA wiring for space applications program test results

The objective of this test is to examine the mechanical and electrical properties of PFPI insulation. Some of the parameters considered during the test are: AC corona (400 Hz), wire fusing time, abrasion resistance, dynamic cut through, notch propagation, and weight loss (outgassing). In addition the degradation of the samples caused by the immature manufacturing status of the PFPI materials for wiring is considered.

Ide, Jim↗

NASA NTRS1997

Calibration of Direct Velocimetry Using Hot Wire Anemometry

We studied the functionality of the IFA300 Hot Wire Anemometry system and its feasibility for the calibration of Direct Estimator Velocimetry (DEV) using Laser Induced Florescence (LIF). The experimental setup consisted of a single-wire hot wire probe measuring one component of velocity, the anemometry computational hardware and software, an HP oscilloscope, and a table fan to produce a simple flow with fluctuations. Measurements were taken at several points in the stream wise and transverse directions in the flow and various parameters recorded such as mean velocities temperature, turbulence intensities, skewness coefficients and flatness coefficients. The IFA300 software also allowed us to perform statistical manipulations such as spectrum analysis on velocities samples and correlation. Utilization of data files, also produced by the anemometry software, and post analysis were performed to produce graphical representations of turbulent intensity versus probe position and a flow field velocity profile. We concluded that the IFA300 Hot Wire Anemometry system is a reliable and functional method for calibration of DEV using LIF. Our future intentions are to set up a test chamber such that both velocity measurement techniques can be applied simultaneously, thus the calibration.

Holland, Michael L.↗

NASA NTRS2002

The Millimeter-Wave Properties of Superconducting Microstrip Lines

We have developed a novel technique for making high quality measurements of the millimeter-wave properties of superconducting thin-film microstrip transmission lines. Our experimental technique currently covers the 75-100 GHz band. The method is based on standing wave resonances in an open ended transmission line. We obtain information on the phase velocity and loss of the microstrip. Our data for Nb/SiO/Nb lines, taken at 4.2 K and 1.6 K, can be explained by a single set of physical parameters. Our preliminary conclusion is that the loss is dominated by the SiO dielectric, with a temperature-independent loss tangent of 5.3 +/- 0.5 x 10(exp -3) for our samples.

Vayonakis, A.↗

NASA NTRS2005

The Second SeaWiFS HPLC Analysis Round-Robin Experiment (SeaHARRE-2)

Eight international laboratories specializing in the determination of marine pigment concentrations using high performance liquid chromatography (HPLC) were intercompared using in situ samples and a variety of laboratory standards. The field samples were collected primarily from eutrophic waters, although mesotrophic waters were also sampled to create a dynamic range in chlorophyll concentration spanning approximately two orders of magnitude (0.3 25.8 mg m-3). The intercomparisons were used to establish the following: a) the uncertainties in quantitating individual pigments and higher-order variables (sums, ratios, and indices); b) an evaluation of spectrophotometric versus HPLC uncertainties in the determination of total chlorophyll a; and c) the reduction in uncertainties as a result of applying quality assurance (QA) procedures associated with extraction, separation, injection, degradation, detection, calibration, and reporting (particularly limits of detection and quantitation). In addition, the remote sensing requirements for the in situ determination of total chlorophyll a were investigated to determine whether or not the average uncertainty for this measurement is being satisfied. The culmination of the activity was a validation of the round-robin methodology plus the development of the requirements for validating an individual HPLC method. The validation process includes the measurements required to initially demonstrate a pigment is validated, and the measurements that must be made during sample analysis to confirm a method remains validated. The so-called performance-based metrics developed here describe a set of thresholds for a variety of easily-measured parameters with a corresponding set of performance categories. The aggregate set of performance parameters and categories establish a) the overall performance capability of the method, and b) whether or not the capability is consistent with the required accuracy objectives.

Source record↗

NASA NTRS2009

Stability of Dosage Forms in the Pharmaceutical Payload Aboard Space Missions

Efficacious pharmaceuticals with adequate shelf lives are essential for successful space medical operations. Stability of pharmaceuticals, therefore, is of paramount importance for assuring the health and wellness of astronauts on future space exploration missions. Unique physical and environmental factors of space missions may contribute to the instability of pharmaceuticals, e.g., radiation, humidity and temperature variations. Degradation of pharmaceutical formulations can result in inadequate efficacy and/or untoward toxic effects, which could compromise astronaut safety and health. Methods: Four identical pharmaceutical payload kits containing 31 medications in different dosage forms (liquid, tablet, capsule, ointment and suppository) were transported to the International Space Station aboard the Space Shuttle (STS-121). One of the 4 kits was stored on the Shuttle and the other 3 were stored on the International Space Station (ISS) for return to Earth at 6-month interval aboard a pre-designated Shuttle flight for each kit. The kit stored on the Shuttle was returned to Earth aboard STS-121 and 2 kits from ISS were returned on STS 117 and STS-122. Results: Analysis of standard physical and chemical parameters of degradation was completed for pharmaceuticals returned by STS-121 after14 days, STS - 117 after11 months and STS 122 after 19 months storage aboard ISS. Analysis of all flight samples along with ground-based matching controls was completed and results were compiled. Conclusion: Evaluation of results from the shuttle (1) and ISS increments (2) indicate that the number of formulations degraded in space increased with duration of storage in space and was higher in space compared to their ground-based counterparts. Rate of degradation for some of the formulations tested was faster in space than on Earth. Additionally, some of the formulations included in the medical kits were unstable, more so in space than on the ground. These results indicate that the space flight environment may adversely affect the shelf life of pharmaceuticals aboard space missions.

Du, Brian J.↗

NASA NTRS2010

Applying Monte Carlo Simulation to Launch Vehicle Design and Requirements Verification

This paper is focused on applying Monte Carlo simulation to probabilistic launch vehicle design and requirements verification. The approaches developed in this paper can be applied to other complex design efforts as well. Typically the verification must show that requirement "x" is met for at least "y" % of cases, with, say, 10% consumer risk or 90% confidence. Two particular aspects of making these runs for requirements verification will be explored in this paper. First, there are several types of uncertainties that should be handled in different ways, depending on when they become known (or not). The paper describes how to handle different types of uncertainties and how to develop vehicle models that can be used to examine their characteristics. This includes items that are not known exactly during the design phase but that will be known for each assembled vehicle (can be used to determine the payload capability and overall behavior of that vehicle), other items that become known before or on flight day (can be used for flight day trajectory design and go/no go decision), and items that remain unknown on flight day. Second, this paper explains a method (order statistics) for determining whether certain probabilistic requirements are met or not and enables the user to determine how many Monte Carlo samples are required. Order statistics is not new, but may not be known in general to the GN&C community. The methods also apply to determining the design values of parameters of interest in driving the vehicle design. The paper briefly discusses when it is desirable to fit a distribution to the experimental Monte Carlo results rather than using order statistics.

Hanson, John M.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-18612-DND

Can a space-based elastic backscatter lidar and coincident infrared radiometer recognize the varied microphysical properties observed by aircraft-based cloud probes in cirrus clouds? If so, then the global and continuous coverage provided by the satellite instruments can extend the knowledge about cirrus cloud properties gained from intensive aircraft field campaigns. The recent Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) aircraft field mission that occurred during August and September, 2013 is an ideal data set to use to test whether this is possible. During SEAC4RS there was extensive sampling of cirrus clouds occurring in widely varied conditions, including the North American Monsoon, forest fires, midlatitude frontal convection and tropical convection. Aircraft cloud probe sampling (2D-S, FCDP or FSSP, CPI) was performed from three airplanes, often coordinated with remote sensing by an aircraft-based elastic backscatter lidar (CPL). During the mission the CALIPSO satellite also observed these clouds from space with a similar elastic backscatter lidar (CALIOP) and an infrared radiometer (IIR). There are several cases where the airplanes sampled directly along the satellite track, but also many overpasses of the region and these features that were not coincident with the aircraft-based sampling. This presentation seeks to address the question of whether relationships between the cloud particle size distribution measurements and habits observed by the SPEC cloud probes and CPL aircraft lidar parameters can be up-scaled to classify the CALIPSO satellite observations from this region and time period. The lidar can also provide cloud top information and evidence of whether there was irreversible transport of ice and aerosols into the UT/LS.

Melody Avery↗

NASA NTRSDate not supplied

Zircon (U-TH)/He Impact Crater Thermochronometry and the Effects of Shock Microstructures on Helium Diffusion Kinetics

Accurate age determinations of hyper-velocity impact and cratering events remains difficult and often controversial, while less than half of all known impact craters are regarded as accurately and precisely dated. Besides 40Ar/39Ar and U-Pb methods, zircon (U-Th)/He dating of impactites is a burgeoning technique to date large- to medium-sized impact structures. Zircon (U-Th)/He ages can be fully reset in minutes at 1000°C, T commonly reached in and directly adjacent to impact melt domains, whereas complete resetting of zircon (U-Th)/He at <300°C, which might be encountered near the crater margins or persist in post-impact hydrothermal systems, may take >103-4 years. However, there is a critical need to test the reliability of (U-Th)/He impact dating in shock deformed zircon, and to quantify helium diffusion kinetics in well-characterized grains with a broad spectrum of shock-induced defect substructures. For this purpose, we investigated samples from two impact structures, the 66 Ma Chicxulub multi-ring basin and the 15 Ma Ries complex crater, to compare zircon diffusion kinetics from impact structures with varying parameters, including size, age, and hydrothermal system longevity. Shock microstructures were characterized by backscattered-electron (BSE) imaging prior to determination of diffusion step-heating fractional release experiments using light-bulb furnace with prograde and retrograde incrementally 10°C steps from 300°C to 600°C. We find that zircon with low-level shock microstructures exhibit no significant deviation from helium diffusion kinetics of undamaged zircon. In contrast, zircon grains with planar deformation features and granular textures classified by SEM are characterized by a dramatic decrease in helium retentivity, similar to radiation damage, due to the reduction in the effective domain size and the introduction of fast diffusion pathways. This likely renders shocked grains more susceptible to impact-induced hydrothermal resetting. Hence, characterization of impact microstructure is critical for determining accurate impact ages, but also offers the opportunity to determine the magnitude and duration of post-impact hydrothermal circulation.

Catherine Ross↗