Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “olivines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Effects of a temperature-dependent rheology on large-scale continental extension

The effects of a temperature-dependent rheology on large-scale continental extension are investigated using a thin viscous sheet model. A vertically-averaged rheology is used that is consistent with laboratory experiments on power-law creep of olivine and that depends exponentially on temperature. Results of the calculations depend principally on two parameters: the Peclet number, which describes the relative rates of advection and diffusion of heat, and a dimensionless activation energy, which controls the temperature dependence of the rheology. At short times following the beginning of extension, deformation occurs with negligible change in temperature, so that only small changes in lithospheric strength occur due to attenuation of the lithosphere. However, after a certain critical time interval, thermal diffusion lowers temperatures in the lithosphere, strongly increasing lithospheric strength and slowing the rate of extension. This critical time depends principally on the Peclet number and is short compared with the thermal time constant of the lithosphere. The strength changes cause the locus of high extensional strain rates to shift with time from regions of high strain to regions of low strain. Results of the calculations are compared with observations from the Aegean, where maximum extensional strains are found in the south, near Crete, but maximum present-day strain rates are largest about 300 km further north.

Sonder, Leslie J.↗
NASA NTRS1989

Electron beam analysis of particulate cometary material

Electron microscopy will be useful for characterization of inorganic dust grains in returned comet nucleus samples. The choice of instrument(s) will depend primarily on the nature of the samples, but ultimately a variety of electron-beam methods could be employed. Scanning and analytical (transmission) electron microscopy are the logical choise for morphological, mineralogical, and bulk chemical analyses of dust grains removed from ices. It may also be possible to examine unmelted ice/dust mixtures using an environmental scanning electron microscope equipped with a cryo-transfer unit and a cold stage. Electron microscopic observations of comet nuclei might include: (1) porosities of dust grains; (2) morphologies and microstructures of individual mineral grains; (3) relative abundances of olivine, pyroxene, and glass; and (4) the presence of phases that might have resulted from aqueous alteration (layer silicates, carbonates, sulfates).

Bradley, John↗
NASA NTRS1989

What if chondritic porous interplanetary dust particles are not the real McCoy

To select a target comet for a Comet Nucleus Sample Return Mission (CNSRM) it is necessary to have an experimental data base to evaluate the extent of diversity and similarity of comets. For example, the physical properties (e.g., low density) of chondritic porous (CP) interplanetary dust particles (IDPs) are believed to resemble these properties of cometary dust although it is yet to be demonstrated that the porous structure of CP IDPs is inherent to presolar dust particles stored in comet nuclei. Porous structures of IDPs could conceivably form during sublimation at the surface of active comet nuclei. Porous structures are also obtained during annealing of amorphous Mg-SiO smokes which initially forms porous aggregates of olivine + platey tridymite and which, upon continued annealing, react to fluffy enstatite aggregates. It is therefore uncertain that CP IDPs are entirely composed of unmetamorphosed presolar dust. Conceivably, new minerals and textures may form in situ in nuclei of active comets as a function of their individual thermal history. Unmetamorphosed comet dust is probably structurally amorphous. Thermal annealing of this dust can produce ultra fine-grained minerals and this ultrafine grain size of CP IDPs should be considered in assessments of aqueous alterations that could affect presolar dust in comet nuclei between 200 and 400 K. Devitrification and hydration may occur in situ in ice-dust mixtures and the mantle of active comet nuclei. Devitrification, or uncontrolled crystallization, of amorphous precursor dust can produce a range of chemical compositions of ultrafine-grained minerals and (non-equilibrium) mineral assemblages and textures in dust contained in comet nuclei as a function of period and trajectory of orbit and number of perihelion passages (not considering internal heating). Thus, experimental data on relevant processes and reaction rates between 200 and 400 K are needed in order to evaluate comet selection, penetration depth for sampling device and curation of samples for CNSRM.

Rietmeijer, Frans J. M.↗
NASA NTRS1989

Interplanetary dust particles collected in the stratosphere - Observations of atmospheric heating and constraints on their interrelationships and sources

TEM and IR spectroscopy investigations of the interplanetary dust particles (IDPs) collected in the stratosphere have shown the majority of IDPs in the layer-lattice silicate and pyroxene classes to not have been heated to temperatures above 600 C during atmospheric entry. This implies that they arrive at the upper atmosphere with low geocentric encounter velocities, and limits the possible encounter trajectories for these particles to relatively circular prograde orbits. On this basis, it is judged unlikely that these IDPs are from earth-crossing comets or asteroids; collected IDPs dominated by olivine include a larger portion of above-600 C-heated particles, suggesting their capture from more eccentric orbits.

Sandford, Scott A.↗
NASA NTRS1990

The infrared spectrum of Comet Bradfield (1987s) and the silicate emission feature

Infrared (1-20 microns) observations of Comet Bradfield (1987s) from three observatories are reported. Silicate emission is prominent in all the data, from heliocentric distance r = 0.87 to 1.45 AU. A CVF spectrum at r = 1.45 AU shows a peak at 11.3 microns identified as crystalline olivine; the spectral shape is similar to that in Halley. Dust optical properties are similar to those of the grains in Halley's jets. Dust production rate near perihelion was about 10 to the 6th g/s and varied as N exp-2. It is suggested that some differences in grain properties among comets could result from difference in the thermal history of the nuclear surface and the relative fraction of the dust particles originating in the subsurface icy layer versus the devolatilized mantle.

Hanner, M. S.↗
NASA NTRS1989

Asteroids - The big picture

An attempt is made to construct a simple model of the evolution of the asteroid belt from the data available about the individual asteroids. Data on the meaning of taxonomic types, the stratigraphy of the asteroid belt, the compositional meaning of Tholen space, collisional and dynamical history, and asteroid shapes are reviewed. Two main paradoxes concerning asteroids, called the ordinary chondrite mystery and the olivine problems, are briefly described. Finally, the tentative model is presented, showing how it takes into account condensation locations, heating, collisional evolution, and delivery of asteroids to earth.

Bell, Jeffrey F.↗
NASA NTRS1990

Cosmic ray exposure dating with in situ produced cosmogenic He-3 - Results from young Hawaiian lava flows

Cosmogenic helium contents in a suite of Hawaiian radiocarbon-dated lava flows were measured to study the use of the production rate of spallation-produced cosmogenic He-3 as a surface exposure chronometer. Basalt samples from the Mauna Loa and Hualalai volcanoes were analyzed, showing that exposure-age dating is feasible in the 600-13000 year age range. The data suggest a present-day sea-level production rate in olivine of 125 + or - 30 atoms/g yr.

Kurz, Mark D.↗
NASA NTRS1990

New mineralogical and chemical data on the Machinga (L6) chondrite, Malawi

The Machinga, southern Malawi, Africa, L6 chondrite (observed fall, January 22, 1981) contains accessory phases of metal, troilite, chromite, and native Cu (which is associated with limonite and found in zones of aqueous alteration). Rare accessory phases are apatite and pentlandite, which are uncommon in L6 chondrites. Major mineral constituents (olivine, orthopyroxene, and plagioclase) indicate shock effects at a level of about 15-20 GPa shock pressure. The meteorite is thus classified to be of L6d type. Melt pockets of widely variable composition are abundant.

Koeberl, Christian↗
NASA NTRS1990

Dark inclusions in Allende, Leoville, and Vigarano - Evidence for nebular oxidation of CV3 constituents

The origin and the history of dark inclusions (DIs) are investigated using petrologic, chemical, and oxygen isotopic data on ten DI samples from Allende, Leoville, and Vigarano. These data indicate that the DIs of the Leoville and Vigarano are closely similar to those of Allende. The inclusions appear to be fragments of CV3 parent bodies which were processed to different degrees prior to their incorporation as clasts into the Allende, Leoville, and Vigarano chondrites. The processing homogenized the olivine compositions, presumably through heating, and also involved oxygen exchange with O-16-poorer surroundings.

Johnson, Craig A.↗
NASA NTRS1990

Ion microprobe studies of trace elements in Apollo 14 volcanic glass beads - Comparisons to Apollo 14 mare basalts and petrogenesis of picritic magmas

Results are presented from trace element analysis, by ion microprobe techniques, of individual glass beads representing seven compositionally distinct types of picritic glass beads from the Apollo 14 landing site. The picritic glass beads at the A-14 exhibited a wide range of primary magma compositions and a lack of petrogenetic linkage (via crystal fractionation) to crystalline basalts. The wide range of major and trace element characteristics of the picritic glass beads is consistent with derivation from mineralogically distinct sources which consist of varying proportions of olivine + orthopyroxene +/- clonopyroxene +/- ilmenite +/- plagioclase +/- KREEP component.

Shearer, C. K.↗
NASA NTRS1990

On the determination of iridium in diverse geological samples employing HPGe-coincidence/NaI(Tl)-anticoincidence spectrometry

This paper reports the Ir content of a variety of geological samples determined by the high-purity Ge-coincidence/NaI(Tl)-anticoincidence gamma-ray spectrometry (henceforth referred to as coincidence/anticoincidence technique) and by the conventional INAA. The advantages of this technique are: (1) the Ir content of the samples is obtained (ppm to a fraction of ppb ranges) not only by the 468.1 keV peak as in the conventional INAA but also by the 784.6 keV and 920.9 keV sum peaks, which gives more confidence in the values obtained; and (2) it is well suited for the samples with high Compton background for which it is difficult to measure the Ir content by the conventional INAA technique. The practical sensitivity of this technique depends on the sample matrix. Under present experimental conditions, it varied from 0.1 ng for Mn nodules and 0.004 ng for Libyan Desert Glass. Iridium values obtained on small (about 1 microg) olivine grains demonstrate the potential application of this new technique to microsamples. The principle and methodology of this new technique as well as its advantages and disadvantages over the conventional INAA are discussed.

Murali, A. V.↗
NASA NTRS1990

Molten (Mg0.88Fe0.12)2SiO4 at lower mantle conditions - Melting products and structure of quenched glasses

Infrared spectra of quenched magnesium silicate glasses synthesized by fusing olivine at pressures in excess of 50 GPa and temperatures greater than 2500 K demonstrate that silicon is dominantly present in four-fold coordination with respect to oxygen within these quenched glasses. This low coordination is attributed, by analogy with the structural behavior of glasses compressed at 300 K, to the instability of higher coordinations in glasses of these compositions on decompression. Spectra of glasses formed in a hydrous environment document that water is extensively soluble in melts at these high pressures and temperatures. Also, these results are consistent with the melting of (Mg0.88Fe0.12)2SiO4 compositions to liquids near pyroxene in stoichiometry under these conditions, with iron-rich magnesiowuestite being the liquidus phase.

Williams, Quentin↗
NASA NTRS1990

Buoyancy-driven melt segregation in the earth's moon. I - Numerical results

The densities of lunar mare magmas have been estimated at liquidus temperatures for pressures from 0 to 47 kbar (0.4 GPa; center of the moon) using a third-order Birch-Murnaghan equation and compositionally dependent parameters from Large and Carmichael (1987). Results on primary magmatic compositions represented by pristine volcanic glasses suggest that the density contrast between very-high-Ti melts and their liquidus olivines may approach zero at pressures of about 25 kbar (2.5 GPa). Since this is the pressure regime of the mantle source regions for these magmas, a compositional limit of eruptability for mare liquids may exist that is similar to the highest Ti melt yet observed among the lunar samples. Although the moon may have generated magmas having greater than 16.4 wt pct TiO2, those melts would probably not have reached the lunar surface due to their high densities, and may have even sunk deeper into the moon's interior as negatively buoyant diapirs. This process may have been important for assimilative interactions in the lunar mantle. The phenomenon of melt/solid density crossover may therefore occur not only in large terrestrial-type objects but also in small objects where, despite low pressures, the range of melt compositions is extreme.

Delano, J. W.↗
NASA NTRS1990

Pristine moon rocks - An alkali anorthosite with coarse augite exsolution from plagioclase, a magnesian harzburgite, and other oddities

Results are presented on the analyses of 18 samples of pristine rocks obtained from the primarily mare Apollo 12 site and from the primarily highland Apollo 14 site, as well as samples from the nonmare Apollo 15 site. It was found that, while two of anorthosites from Apollo 12 were similar in composition to most other anorthosites from the west-central near region, the texture of an alkali anorthosite featured a long and narrow crystal of augite surrounded by a single crystal of plagioclase, clearly suggesting that the augite formed by exsolution out of the plagioclase. Another Apollo 12 rocklet was an unusual magnesian harzburite, with subequal amounts of enstatite and olivine, traces of Cr-Fe spinel, and FeNi metal, but no plagioclase; the bulk composition was found to be remarkably Ir-rich (53 percent) for a pristine rock, and the texture was also unusual. Apollo 14 samples included several uncommonly Al-rich and REE-poor impact melt breccias.

Warren, P. H.↗
NASA NTRS1990

Parental magmas of Mare Fecunditatis - Evidence from pristine glasses

Results are presented on the petrography and electron microprobe analyses of 14 discrete glass beads from the Luna 16 core sample (21036,15) from Mare Fecunditatis regolith, that were previously characterized as representing pristine glasses. Compared to Apollo pristine glasses analyzed by Delano (1986), the Luna 16 pristine glasses have higher CaO and Al2O3 contents but lower MgO and Ni. On the basis of their contents of MgO, FeO, Al2O3, and CaO, these pristine glasses could be divided into two groups, A and B. It is suggested that at least two parental magmas are needed to explain the chemical variations among these glasses. The Group B glasses appear to represent primitive parental magma that evolved by olivine fractionation to the compositions of the Luna 16 aluminous mare basalts, whereas the Group A volcanic glasses may represent an unusual new basalt magma type that contains a high plagioclase component.

Jin, Y.↗
NASA NTRS1990

The Alphonsus region - A geologic and remote-sensing perspective

A number of interesting questions exist concerning the composition and origin of a number of geologic units in the west-central highlands crater Alphonsus. This paper utilizes a variety of newly obtained remote sensing data to address these questions and improve the current understanding of the geologic history of the Alphonsus region. Near-infrared and UV/VIS reflectance spectra were obtained and analyzed for many of the geologic features, the results of which are presented here. Spectra collected for pyroclastic debris associated with three endogenic dark halo crater complexes on the floor of Alphonsus indicate a basaltic assemblage rich in olivine. These pyroclastic deposits exhibit generally low returns on the depolarized 3.8 cm radar image. An exogenic dark halo crater was identified on the interior of Alphonsus and appears to be composed of a mixture of pyroclastic debris and highlands material. The light plains deposits and other highland units in the Alphonsus region generally exhibit a noritic compostion. However, the Alphonsus central peak is composed of pure anorthosite. This composition is unique within the region.

Coombs, C. R.↗
NASA NTRS1990

Deconvolution of mineral absorption bands - An improved approach

Although visible and near IR reflectance spectra contain absorption bands that are characteristic of the composition and structure of the absorbing species, deconvolving a complex spectrum is nontrivial. An improved approach to spectral deconvolution is presented that accurately represents absorption bands as discrete mathematical distributions and resolves composite absorption features into individual absorption bands. The frequently used Gaussian model of absorption bands is shown to be inappropriate for the Fe(2+) electronic transition absorptions in pyroxene spectra. A modified Gaussian model is derived using a power law relationship of energy to average bond length. The modified Gaussian model is shown to provide an objective and consistent tool for deconvolving individual absorption bands in the more complex orthopyroxene, clinopyroxene, pyroxene mixtures, and olivine spectra.

Sunshine, Jessica M.↗
NASA NTRS1990

Deformation and thermal histories of chondrules in the Chainpur (LL3.4) chondrite

The results of optical and TEM studies of chondrules in the Chainpur (LL3.4) chondrite are presented. Results were obtained, using a microprobe, from quantitative microchemical analyses for Mg, Fe, Si, and Ca for the chondrule olivine and pyroxene, showing that chondrules in the Chainpur chondrite experienced varied degrees of annealing and deformation. It is suggested that Chainpur may be an agglomerate of a breccia that experienced little overall deformation or heating during and after the final accumulation and compaction of its constituents.

Ruzicka, Alex↗