Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

On fast simulation of dynamical system with neural vector enhanced numerical solver

The large-scale simulation of dynamical systems is critical in numerous scientific and engineering disciplines. However, traditional numerical solvers are limited by the choice of step sizes when estimating integration, resulting in a trade-off between accuracy and computational efficiency. To address this challenge, we introduce a deep learning-based corrector called Neural Vector (NeurVec), which can compensate for integration errors and enable larger time step sizes in simulations. Our extensive experiments on a variety of complex dynamical system benchmarks demonstrate that NeurVec exhibits remarkable generalization capability on a continuous phase space, even when trained using limited and discrete data. NeurVec significantly accelerates traditional solvers, achieving speeds tens to hundreds of times faster while maintaining high levels of accuracy and stability. Moreover, NeurVec’s simple-yet-effective design, combined with its ease of implementation, has the potential to establish a new paradigm for fast-solving differential equations based on deep learning.

97 MATHEMATICS AND COMPUTING↗

Evaluation of Analytical and Numerical Techniques for Defining the Radius of Influence for an Open-Loop Ground Source Heat Pump System

In an open-loop groundwater heat pump (GHP) system, groundwater is extracted, run through a heat exchanger, and injected back into the ground, resulting in no mass balance changes to the flow system. Although the groundwater use is non-consumptive, the withdrawal and injection of groundwater may cause negative hydraulic and thermal impacts to the flow system. Because GHP is a relatively new technology and regulatory guidelines for determining environmental impacts for GHPs may not exist, consumptive use metrics may need to be used for permit applications. For consumptive use permits, a radius of influence is often used, which is defined as the radius beyond which hydraulic impacts to the system are considered negligible. In this paper, the hydraulic radius of influence concept was examined using analytical and numerical methods for a non-consumptive GHP system in southeastern Washington State. At this location, the primary hydraulic concerns were impacts to nearby contaminant plumes and a water supply well field. The results of this study showed that the analytical techniques with idealized radial flow were generally unsuited because they over predicted the influence of the well system. The numerical techniques yielded more reasonable results because they could account for aquifer heterogeneities and flow boundaries. In particular, the use of a capture zone analysis was identified as the best method for determining potential changes in current contaminant plume trajectories. The capture zone analysis is a more quantitative and reliable tool for determining the radius of influence with a greater accuracy and better insight for a non-consumptive GHP assessment.

GHPs↗

Experiments and numerical simulations on high-density magnetohydrodynamic electrical power generation

We describe experiments and numerical simulations on high-density energy conversion using a compact closed-cycle magnetohydrodynamic electrical power generator, where shock-tube-based experiments and quasi-three-dimensional numerical simulations are fully coupled. The temporal plasma-fluid behavior, the one- and two-dimensional plasma-fluid structures, the enthalpy-entropy diagram, the Hall voltage-Hall current characteristics, and the quality of the energy conversion efficiency are investigated. The slightly divergent channel configuration, the application of high- and uniform-density magnetic flux to the entire generator, the high electrical conductivity, the symmetric plasma structure and stable plasma behavior, and the sufficient pressure gradient used to drive the fluid overcome the disadvantages of the generator due to its compactness, and markedly improve its energy conversion performance, namely, a power density of 0.76 GW/m{sup 3}, an isentropic efficiency of 51%, and an enthalpy extraction ratio of 17.0%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient Numerical Solution of Coupled Radial Differential Equations in Multichannel Scattering Problems

Numerical solution of coupled radial differential equations which are encountered in multichannel scattering problems is presented. Numerical approach is based on the combination of the exterior complex scaling method and the finite-elements method with the discrete variable representation. This method can be used not only to solve multichannel scattering problem but also to find bound states and resonance positions and widths directly by diagonalization of the corresponding complex scaled Hamiltonian. Efficiency and accuracy of this method is demonstrated on an analytically solvable two-channel problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical Approximation of a Transport Equation with a Time-Dependent Dispersion Flux

The objective of this work is to discuss a more general one-dimensional diffusion equation that accounts for certain aspects such as the variation of a parameter that describes the relaxation time of the mass flux and also the presence of a potential field. The equation will have properties similar to a an hyperbolic equation or parabolic equation according to which values of the relaxation parameter or the potential field we consider. In the hyperbolic case we deal with some discontinuities. We apply a numerical scheme to solve this equation, which consists of using an inverse Laplace transform algorithm. The Laplace method is used to remove the time-dependent terms in the governing equation and boundary conditions. For a constant potential field general solutions can be determined. On the other hand for a non-constant potential field, a spatial discretisation must be considered. We will study the convergence of the numerical scheme based on the inverse of Laplace transform and present some test problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical and theoretical study of Bernstein modes in a magnetized quantum plasma

A numerical and theoretical study is presented for the propagation of electron Bernstein modes in a magnetized quantum plasma. The dispersion relation for electrostatic waves is derived, using a semiclassical Vlasov model for Fermi-Dirac distributed electrons. The dispersion relation is checked numerically with direct Vlasov simulations, where the wave energy is concentrated to the Bernstein modes as well as to the zero-frequency convective mode. Dispersion relations in the long wavelength limit are derived, including the upper hybrid dispersion relation for a degenerate quantum plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical investigation of the magnetized plasma sheath characteristics in the presence of negative ions

In this work, a planar and low-pressure discharge in a mixture of a noble gas (argon) and an electronegative gas (oxygen) is considered. It is assumed that the produced plasma consists of electrons, two species of positive ions, and one species of negative ion. The behavior of the density distribution and kinetic energy of these charged particles in the sheath region are studied. Also, it is assumed that a weak external magnetic field which is nearly perpendicular to the wall is exerted to the sheath region. The positive ion species are considered as a cold, collisionless fluid while both electron and negative ion densities obey the Boltzmann distribution. By using a hydrodynamic approach and ignoring ionization and recombination, it is shown numerically that by increasing the density of the negative ions in the plasma the density distribution of both positive ion species and the kinetic energy of these ion species decreases and increases, respectively. Also, it is shown that in the presence of the negative ions the normalized electrostatic potential of the sheath region changes and by increasing the negative ion densities the normalized electrostatic potential in the sheath increases. In addition, the effect of the density ratio of both positive ion species, density and temperature of the negative ions, and the magnitude of the external magnetic field are studied on the net density distribution of the charged particles in the sheath region. The obtained numerical results show that by decreasing the temperature of the negative ions the amplitude of the fluctuations of the net density distribution of the charged particles in the sheath region increases and the position of these fluctuations shifts toward the sheath edge. Finally, it is seen that in the absence of negative ions the net density distribution of charged particles in the sheath region is monotonic while in the presence of negative ions it is nonmonotonic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Astrophysical jets: Observations, numerical simulations, and laboratory experiments

This paper provides summaries of ten talks on astrophysical jets given at the HEDP/HEDLA-08 International Conference in St. Louis. The talks are topically divided into the areas of observation, numerical modeling, and laboratory experiment. One essential feature of jets, namely, their filamentary (i.e., collimated) nature, can be reproduced in both numerical models and laboratory experiments. Another essential feature of jets, their scalability, is evident from the large number of astrophysical situations where jets occur. This scalability is the reason why laboratory experiments simulating jets are possible and why the same theoretical models can be used for both observed astrophysical jets and laboratory simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Compressible magnetic Rayleigh-Taylor instability in stratified plasmas: Comparison of analytical and numerical results in the linear regime

Magnetic Rayleigh-Taylor instability is addressed in compressible hydrostatic media. A full model is presented and compared to numerical results from a linear perturbation code. A perfect agreement between both approaches is obtained in a wide range of parameters. Compressibility effects are examined and substantial deviations from classical Chandrasekhar growth rates are obtained and confirmed by the model and the numerical calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linearized model Fokker-Planck collision operators for gyrokinetic simulations. II. Numerical implementation and tests

A set of key properties for an ideal dissipation scheme in gyrokinetic simulations is proposed, and implementation of a model collision operator satisfying these properties is described. This operator is based on the exact linearized test-particle collision operator, with approximations to the field-particle terms that preserve conservation laws and an H-theorem. It includes energy diffusion, pitch-angle scattering, and finite Larmor radius effects corresponding to classical (real-space) diffusion. The numerical implementation in the continuum gyrokinetic code GS2[Kotschenreuther et al., Comput. Phys. Comm. 88, 128 (1995)] is fully implicit and guarantees exact satisfaction of conservation properties. Numerical results are presented showing that the correct physics is captured over the entire range of collisionalities, from the collisionless to the strongly collisional regimes, without recourse to artificial dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Frozen Gaussian series representation of the imaginary time propagator theory and numerical tests

Thawed Gaussian wavepackets have been used in recent years to compute approximations to the thermal density matrix. From a numerical point of view, it is cheaper to employ frozen Gaussian wavepackets. In this paper, we provide the formalism for the computation of thermal densities using frozen Gaussian wavepackets. We show that the exact density may be given in terms of a series, in which the zeroth order term is the frozen Gaussian. A numerical test of the methodology is presented for deep tunneling in the quartic double well potential. In all cases, the series is observed to converge. The convergence of the diagonal density matrix element is much faster than that of the antidiagonal one, suggesting that the methodology should be especially useful for the computation of partition functions. As a by product of this study, we find that the density matrix in configuration space can have more than two saddle points at low temperatures. This has implications for the use of the quantum instanton theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of electron transfer reactions in the presence of mode mixing: Comparison of a generalized master equation approach with the numerically exact simulation

A generalized master equation approach is developed to describe electron transfer (ET) dynamics in the presence of mode mixing. Results from this approximate approach are compared to the numerically exact simulations using the multilayer multiconfiguration time-dependent Hartree theory. The generalized master equation approach is found to work well for nonadiabatic resonant ET. Depending on the specific situation, it is found that the introduction of mode mixing may either increase or decrease the ET time scale. The master equation fails in the adiabatic ET regime, where the introduction of mode mixing may lead to electron trapping. From both the approximate theory and the numerically exact simulation it is shown how neglecting mode mixing in practical calculations may lead to inaccurate predictions of the ET dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Numerical Model of the Temperature Field of the Cast and Solidified Ceramic Material

Corundo-baddeleyit material (CBM)--EUCOR--is a heat- and wear-resistant material even at extreme temperatures. This article introduces a numerical model of solidification and cooling of this material in a non-metallic mould. The model is capable of determining the total solidification time of the casting and also the place of the casting which solidifies last. Furthermore, it is possible to calculate the temperature gradient in any point and time, and also determine the local solidification time and the solidification interval of any point. The local solidification time is one of the input parameters for the cooperating model of chemical heterogeneity. This second model and its application on samples of EUCOR prove that the applied method of measurement of chemical heterogeneity provides detailed quantitative information on the material structure and makes it possible to analyse the solidification process. The analysis of this process entails statistical processing of the results of the measurements of the heterogeneity of the components of EUCOR and performs correlation of individual components during solidification. The crystallisation process seems to be very complicated, where the macro- and microscopic segregations differ significantly. The verification of both numerical models was conducted on a real cast 350x200x400 mm block.

36 MATERIALS SCIENCE↗

A numerical algorithm for the explicit calculation of SU(N) and SL(N,C) Clebsch-Gordan coefficients

We present an algorithm for the explicit numerical calculation of SU(N) and SL(N,C) Clebsch-Gordan coefficients, based on the Gelfand-Tsetlin pattern calculus. Our algorithm is well suited for numerical implementation; we include a computer code in an appendix. Our exposition presumes only familiarity with the representation theory of SU(2).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental Investigations And Numerical Modelling of 210CR12 Steel in Semi-Solid State

Experimental investigation, including hot compression and simple closed die filling was performed. Temperature range of tests was between 1225 deg. C and 1320 deg. C. Temperature selection was adequate with liquid fraction between 20 and 60%, which is typical for thixoforming processes. In the die filling test, steel dies with ceramic layer was used (highly refractory air-setting mortar JM 3300 manufactured by Thermal Ceramics). Experiments were carried out on the Gleeble 3800 physical simulator with MCU unit. In the paper, methodology of experimental investigation is described. Dependency of forming forces on temperature and forming velocities is analysed. Obtained results are discussed. The second part of the paper concerns numerical modelling of semi-solid forming. Numerical models for both sets of test were developed. Structural and Computational Fluid Dynamics models are compared. Initial works in microstructural modelling of 210CR12 steel behaviour are described. Lattice Boltzman Method model for thixotropic flows is introduced. Microscale and macroscale models were integrated into multiscale simulation of semi-solid forming. Some fundamental issues related to multiscale modelling of thixoforming are discussed.

36 MATERIALS SCIENCE↗

Theoretical and numerical modelling of chaotic electrostatic ion cyclotron (EIC) oscillations by Jerk equation

In the last few years, third order explicit autonomous differential equations, known as jerk equations, have generated great interest as they show features of regular and chaotic motion. In this paper, we have modelled chaotic electrostatic ion cyclotron oscillations using a third order nonlinear ordinary differential equation (ODE) and investigated its nonlinear dynamical properties. The nonlinear ODE has been derived for a plasma system from a two fluid model in the presence of a source term, under the influence of an external magnetic field, which is perpendicular to the direction of the wave vector. It is seen that the equation does not require an external forcing term to obtain chaotic behaviour. The stability of the solutions of the equation has been investigated analytically as well as numerically, and the bifurcation diagram obtained shows a number of interesting phenomena for various regimes of parameters. The coexisting attractors as well as their corresponding basins are shown and the phase space portraits at different conditions are obtained numerically and shown here. The results obtained here are in agreement with preliminary experiments conducted for a similar configuration of a plasma system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory comparison and numerical benchmarking on neoclassical toroidal viscosity torque

Systematic comparison and numerical benchmarking have been successfully carried out among three different approaches of neoclassical toroidal viscosity (NTV) theory and the corresponding codes: IPEC-PENT is developed based on the combined NTV theory but without geometric simplifications [Park et al., Phys. Rev. Lett. 102, 065002 (2009)]; MARS-Q includes smoothly connected NTV formula [Shaing et al., Nucl. Fusion 50, 025022 (2010)] based on Shaing's analytic formulation in various collisionality regimes; MARS-K, originally computing the drift kinetic energy, is upgraded to compute the NTV torque based on the equivalence between drift kinetic energy and NTV torque [J.-K. Park, Phys. Plasma 18, 110702 (2011)]. The derivation and numerical results both indicate that the imaginary part of drift kinetic energy computed by MARS-K is equivalent to the NTV torque in IPEC-PENT. In the benchmark of precession resonance between MARS-Q and MARS-K/IPEC-PENT, the agreement and correlation between the connected NTV formula and the combined NTV theory in different collisionality regimes are shown for the first time. Additionally, both IPEC-PENT and MARS-K indicate the importance of the bounce harmonic resonance which can greatly enhance the NTV torque when E×B drift frequency reaches the bounce resonance condition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical and simulation study of terahertz radiation generation by laser pulses propagating in the extraordinary mode in magnetized plasma

A one-dimensional numerical model for studying terahertz radiation generation by intense laser pulses propagating, in the extraordinary mode, through magnetized plasma has been presented. The direction of the static external magnetic field is perpendicular to the polarization as well as propagation direction of the laser pulse. A transverse electromagnetic wave with frequency in the terahertz range is generated due to the presence of the magnetic field. Further, two-dimensional simulations using XOOPIC code show that the THz fields generated in plasma are transmitted into vacuum. The fields obtained via simulation study are found to be compatible with those obtained from the numerical model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗