Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Mesoscale modeling of solute precipitation and radiation damage

This report summarizes the low length scale effort during FY 2014 in developing mesoscale capabilities for microstructure evolution in reactor pressure vessels. During operation, reactor pressure vessels are subject to hardening and embrittlement caused by irradiation-induced defect accumulation and irradiation-enhanced solute precipitation. Both defect production and solute precipitation start from the atomic scale, and manifest their eventual effects as degradation in engineering-scale properties. To predict the property degradation, multiscale modeling and simulation are needed to deal with the microstructure evolution, and to link the microstructure feature to material properties. In this report, the development of mesoscale capabilities for defect accumulation and solute precipitation are summarized. Atomic-scale efforts that supply information for the mesoscale capabilities are also included.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparing Macroscale and Microscale Simulations of Porous Battery Electrodes

This article describes a vertically-integrated exploration of NMC electrode rate limitations, combining experiments with corresponding macroscale (macro-homogeneous) and microscale models. Parameters common to both models were obtained from experiments or based on published results. Positive electrode tortuosity was the sole fitting parameter used in the macroscale model, while the microscale model used no fitting parameters, instead relying on microstructural domains generated from X-ray microtomography of pristine electrode material held under compression while immersed in electrolyte solution (additionally providing novel observations of electrode wetting). Macroscale simulations showed that the capacity decrease observed at higher rates resulted primarily from solution-phase diffusion resistance. This ability to provide such qualitative insights at low computational costs is a strength of macroscale models, made possible by neglecting electrode spatial details. To explore the consequences of such simplification, the corresponding, computationally-expensive microscale model was constructed. This was found to have limitations preventing quantitatively accurate predictions, for reasons that are discussed in the hope of guiding future work. Nevertheless, the microscale simulation results complement those of the macroscale model by providing a reality-check based on microstructural information; in particular, this novel comparison of the two approaches suggests a reexamination of salt diffusivity measurements.

25 ENERGY STORAGE↗

Regulating Gas Transport in Molecularly Engineered Polymer Membranes (Final Technical Report)

Energy-efficient separation processes are essential for a wide range of applications ranging from clean fuels (e.g., hydrogen purification) and petroleum refining (e.g., natural gas processing) to water purification and carbon capture. Membrane-mediated separations have shown tremendous promise in providing high productivity and high separation efficiency at significantly lower energy consumption, e.g., up to 90% less energy cost than traditional thermally driven processes such as distillation. Polymeric membranes–the dominant separation membrane materials–have yet to reach their full potential due to their limitations in long-term durability (e.g., productivity loss over the period of their lifetime due to physical aging) or insufficient stability under harsh conditions (e.g., high temperature, chemically complex feeds). This research seeks to establish a new paradigm in polymer membrane material design by harnessing crosslinked model networks with well-defined yet finely tailorable microstructure to facilitate fast and selective gas transport and simultaneously enhance membrane stability. Unlike traditional randomly crosslinked polymers, which suffer from structural inconsistencies and consequently suboptimal gas separation performance, crosslinked model network membranes prepared via a precisely controlled end-linking process enables the creation of previously unattainable microstructure tunability, which, in turn, results in versatile crosslinked membranes with high separation performance that meet the needs of various challenging gas separations. Using model network framework as a fundamental tool by applying this concept in diverse polymer categories, this work has led to the development of various innovative crosslinked membrane structures such as unimodal, bimodal and clustered model networks. These advanced crosslinked polymer membranes not only demonstrate exceptional gas separation performance that significantly outperform existing randomly crosslinked membranes, but also possess excellent long-term durability and robust stability under complex operating conditions. From a fundamental perspective, results from this research provide critical mechanistic insights into gas separation in crosslinked polymer membranes, addressing key knowledge gaps and opening new avenues for membrane design to meet various separation needs. The new membrane materials produced from this research enable the use of polymeric membranes for high temperature gas separations, offering substantial energy and cost savings by eliminating the need for repeated cooling-heating cycles in industrial processes.

02 PETROLEUM↗

Initial Microstructure Examination of High Burnup Fuel with Varying Operational Burnups

his report presents an initial examination of the microstructure of high burnup UO 2 under pre- and postloss of coolant accident (LOCA) conditions. This work builds upon work previously conducted on high burnup UO 2 fuel at Oak Ridge National Laboratory. Studying microstructure evolutions that occur in UO 2 during irradiation, particularly in high burnup fuel, will provide a deeper understanding of fuel fragmentation under simulated LOCA conditions. High burnup UO 2 microstructural data is also needed to improve constitutive models intended to predict high burnup fuel fragmentation. The objective of this work is to begin the process of examining high burnup fuel microstructural features before and after LOCA testing to better understand mechanisms driving experimental observations. Several high burnup fuel samples were available from historic fuel shipments to ORNL. These samples were leveraged along with state-of-the-art microscopy capabilities. This report summarizes the current ongoing work using these fuel samples to interpret and analyze high burnup fuel microstructures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The appearance of plasticity on the blocks surfaces in geological media

In present the elasticity and plasticity are absolutely different models of solids, which are not relate to each other. The experimental observations show, that the plasticity arrives and localizes on the surfaces of structures, which contain solid samples. The transition in special state, where a small part of solid volume is in plastic state, while the main part of volume is in elastic state not be describe by classical continuum Cauchy and Poisson model. This classical model requires two alternative states. Either is elastic state in the all volume or plastic one for all elementary volume too. However, the structured model of space gives us a possibility to describe this complicate state. In this paper shown that the sliding surfaces divided to each other by distances equal to the average sizes of microstructures, in the contrary of classical plasticity, where they have not characteristic distance. The energy of plastic transition is very small, because the main part of volume is elastic body. This description means the smooth transition from elasticity to plasticity in vicinity of sliding surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ probing of interfacial roughness and transient phases during ceramic cold sintering process

The ceramic cold sintering process (CSP) offers an eco-friendly approach to producing fully dense ceramics at low temperatures. However, an incomplete mechanistic understanding hinders its optimization and widespread adoption. In this study, we analyze the microstructural and structural changes in ZnO, a model CSP system, using in situ synchrotron-based high-energy small-angle X-ray scattering and X-ray diffraction techniques. Our results reveal the time evolution of ZnO particles' surface area and roughness, reflecting the dissolution and re precipitation processes that enable densification. The in situ measurements supply valuable kinetic data for these stages of CSP. Alongside microstructural changes and densification, we observed the evolution of secondary phases representing reaction products between ZnO and acetic acid, the solvent used. The initial ZnO/solvent mixture's dominant secondary phase is attributed to zinc acetate, which is gradually replaced by a zinc soap-type structure during CSP. This structure has a large (≈ 21 Å) lattice parameter and is assumed to have a layered nature. The formation of this soap phase, which is retained in the sintered product as an intergranular component, appears to be a signature of successful cold sintering as it facilitates mass transport, leading to densification. Here, our study underscores the potential of in situ synchrotron characterization for revealing microstructural and phase-evolution details during CSP. These findings, which would be challenging to obtain through ex situ measurements, provide crucial data to guide and validate theoretical models, ultimately enhancing CSP's effectiveness and adoption.

36 MATERIALS SCIENCE↗

Dislocation decorrelation and relationship to deformation microtwins during creep of a y' precipitate strengthened Ni-based superalloy

The evolution of microtwins during high temperature creep deformation in a strengthened Ni-base superalloy has been investigated through a combination of creep testing, TEM characterization, theoretical modeling and computer simulation. Experimentally, microtwin nucleation sources were identified and their evolution was tracked by characterizing the deformation substructure at different stages of the creep deformation. Initially, deformation is highly localized around stress concentrators such as carbides, borides and serrated grain boundaries, which act as sources of a/2<110> matrix type dislocations. Due to microstructural effects such as fine channels between particles and low matrix stacking fault energies, the a/2<110> matrix dislocations dissociate into a/6<112> Shockley partials, which were commonly observed to be decorrelated from one another, creating extended intrinsic stacking faults in the matrix. As deformation progress further, microtwins form via partial dislocations cooperatively shearing both and phases on adjacent {111} glide planes. The TEM observations lead directly to an analysis of dislocation-precipitate interactions. Through phase field simulations and theoretical analysis based on Orowan looping, the important processes of dislocation dissociation and decorrelation are modeled in detail, providing comprehensive insight into the microstructural features and applied stress conditions that favor the microtwinning deformation mode in strengthened Ni-based superalloys.

36 MATERIALS SCIENCE↗

Microscale Constitutive Model Sensitivity on Multiscale Modeling of Fiber Reinforced Composites

Fiber reinforced composites are desirable in applications where low weight and high strength are needed, but are susceptible to microscale variability during manufacturing, making failure predictions difficult. The impact microscale variability has on macroscale mechanical response is difficult to predict due to the computational efficiency needed to simulate many, large, high fidelity, microscale models. In this study, a multiscale approach was taken to model 3-point bend, 4-point bend, and tensile experiments of a unidirectional composite from only having microstructure scans of these samples and constituent properties from literature. These scans were sampled with different sized windows, and statistically equivalent microstructures were generated, then simulated for stiffness, strength, and fracture toughness using an efficient micromechanical. Mesoscale models were created where element sizes equaled microstructure size, and properties were assigned through sampling of microscale simulation results. First, this study showed the effect of using Weibull scaling on constituent matrix strength on macroscale response. Then, a comparison was made between different element sizes and experiments. Finally, model dimensions were fixed, and the effect of randomly distributed local properties alone was examined. Results showed that the scatter of strength and stiffness in the experiments could be predicted well using images of the microscale fiber morphologies and that using stochastic properties produced a 3% coefficient of variation of strength for all experiments.

statistical microstructure↗

Microstructure and CPO evolution of dynamically recrystallized olivine during complex deformation conditions: a full-field numerical modeling approach

The rheological properties of mantle rocks are strongly dependent on their crystallographic preferred orientation (CPO). Olivine CPO, defined by the orientation of seismically fast [100] axes parallel to flow direction, is also thought to be a dominant contributor to seismic anisotropy in the Earth's upper mantle. However, the amount of deformation needed to overprint a new CPO on a pre-existing fabric and the impact of the inherited CPOs on the transient microstructure evolution, remain unknown. This study employs a full-field numerical approach (VPFFT-ELLE) to explore the dynamic recrystallization and microstructural evolution of olivine polycrystalline aggregates under complex deformation conditions. We test four combinations of successive pure shear and simple shear boundary conditions. Findings indicate that inherited CPOs influence subsequent deformation in a manner dependent on the kinematic relationship between successive stages. In all cases, a minor strain increment (ε ∼0.3–0.6) is sufficient to erase the previous microstructure and CPO. However, when deformation conditions change dramatically (e.g., stretching direction changes orthogonally), the intensity of the new CPO developed is significantly lower and strain distribution are specially altered. During a transient strain stage, pre-existing microstructures undergo extensive reworking, especially when deformation conditions are changed dramatically, such as switching from simple shear to a pure shear condition with a parallel shortening direction relative to the stretching direction. We estimate the significance of these results in interpreting observations of seismic velocity anisotropy, concluding that P-wave seismic anisotropy is significantly and positively correlated with the evolution of olivine CPO with deformation history. This research underscores the transient nature of microstructural rearrangement in olivine aggregates and the necessity for caution in interpreting seismic anisotropy in regions with complex deformation histories, as inherited CPOs can influence current fabric development and induce deviation to the present deformation conditions.

36 MATERIALS SCIENCE↗

Holistic Microstructure Control Strategies in Photopolymerization‐Induced Phase Separation of Acrylate Systems

Open porous materials, known for their large surface area and interconnected structures, are essential in various applications, including batteries, ion exchange, catalysis, filtration, and electronic waste recycling. A critical aspect of the functionality of porous membranes is the precise control of pore size and morphology. Photopolymerization-induced phase separation (photo-PIPS) offers a convenient and versatile methods for creating porous structures. However, controlling the porous morphology remains challenging due to the complex interplay between thermodynamics, polymerization kinetics, and monomer structures, which makes it difficult to establish the relationship between processing conditions and resulting morphology in photo-PIPS. Herein, a physics-based phase-field model capable of generating and characterizing the microstructures of porous materials based on both average and localized features is developed. Using the phase-field simulations as test bed, the effects of polarity, light intensity, and curing temperature, as well as the previously unexplored roles of chain transfer agents and substrates, on the morphology of the resulting porous microstructure are investigated. Experiments are performed to verify the results predicted by the simulations. This work lays out a comprehensive guide for designing PIPS-derived porous microstructures and offers practical engineering strategies for tailoring microstructure-level topology and size of pores for application-specific needs.

36 MATERIALS SCIENCE↗

An Algorithm to Generate Synthetic 3D Microstructures from 2D Exemplars

The inverse problem of constructing 3D microstructures from 2D data is an area of active research within the materials science community. This paper presents the implementation of a robust, computationally efficient algorithm, Hierarchical Algorithm for the Reconstruction of Exemplars (HARE), written in Python to reconstruct 3D features in a given microstructure from up to three orthogonal 2D exemplars using nearest neighbor matching to reproduce feature qualities, such as shape, size, and distribution. HARE’s feature sampling implements histogram reweighting to avoid both over- and undersampling. A neighborhood voting scheme allows each pixel to provisionally affect its neighbors according to its weight. Finally, the algorithm is presently configured for two-phase materials and is being extended to accommodate multiple phases. HARE is a convenient and robust base from which to generate statistically representative synthetic microstructures for use in multi-scale modeling or machine learning applications to support advanced manufacturing and materials discovery.

36 MATERIALS SCIENCE↗

Benchmark microgravity experiments and computations for 3D dendritic-array stability in directional solidification

In this study, we present a comprehensive quantitative analysis of stability bands for dendritic arrays during directional solidification of a transparent succinonitrile-0.46 wt % camphor alloy, spanning a broad range of pulling velocities. Taking advantage of the microgravity environment aboard the International Space Station where most convection effects are suppressed, we obtain unique measurements that quantify the stable primary spacing range of spatially extended three-dimensional dendritic array structures under purely diffusive growth conditions. Through carefully designed velocity jump experiments and detailed examination of sub-grain boundary dynamics, we characterize key instabilities, including elimination and tertiary branching, shedding new light on the mechanisms governing dynamic dendritic spacing selection in extended 3D arrays. Phase field simulations are performed to characterize the stability limits of dendritic array structures for quantitative comparison with the flight experiments. Although the simulations capture general trends, significant deviations are noted at the upper stability boundary, indicating the influence of additional, unexplored factors. These findings contribute to a deeper understanding of dendritic growth dynamics and offer valuable benchmark data that could aid in refining predictive models and improving control of dendritic microstructures in metallurgical applications.

36 MATERIALS SCIENCE↗

Influence of geochemical reactions on the creep behavior of Mt. Simon sandstone

The capture and subsurface storage of carbon dioxide is a sustainable option that is currently pursued worldwide to mitigate greenhouse gas effect. However, predicting the long-term mechanical integrity of CO 2 underground storage systems remains a challenge. To address that question, it is essential to understand the influence of fluid-rock chemo-mechanical interactions on the long-term and on the time-dependent mechanical properties. In turn, the long-term mechanical response and the time-dependent mechanical behavior can be represented by the creep response. We investigate the impact of CO 2 -induced geochemical reaction on the creep response of Mt. Simon sandstone with a 50–400 micron grain size. We perform static and dynamic flow experiments on Mt. Simon sandstone specimens under geological conditions, at a temperature of T = 50 - 53 °C and for CO 2 pressures of P = 8:62; 17:2 MPa under both static flow and dynamic flow-through conditions. After aging, we employ creep indentation testing, high-resolution SEM-EDS, computer vision, machine learning, and micromechanics modeling to probe changes on the microstructure and mechanical properties. Following both static and dynamic flow-through experiments, we observe a 10–22% decrease in quartz volume fraction and an increase in both the microporosity (7–28%) and nanoporosity (60–65%). Additional CO 2 -induced microstructural changes include an enlargement of pore throats and the formation of channels. These observations point to the presence of CO 2 -induced K-feldspar dissolution and clay dissolution reactions. Here, the macroscopic creep behavior is logarithmic and the macroscopic creep modulus varies depending on the microporosity and the relative quartz and feldspar content. As a result of these geochemical reactions and of the related microstructural changes, a 55-60% decrease in the macroscopic logarithmic creep modulus is predicted.

58 GEOSCIENCES↗

Characterization of phase properties and deformation in ferritic-austenitic duplex stainless steels by nanoindentation and finite element method

The phase properties and deformation behavior of the δ–ferrite and γ–austenite phases of CF–3 and CF–8 cast duplex stainless steels were characterized by nanoindentation and microstructure-based finite element method (FEM) models. We evaluated the elastic modulus of each phase and the results indicate that the mean elastic modulus of the δ–ferrite phase is greater than that of the γ–austenite phase, and the mean nanoindentation hardness values of each phase are approximately the same. Furthermore, the elastic FEM model results illustrate that greater von Mises stresses are located within the δ–ferrite phase, while greater von Mises strains are located in the γ–austenite phase in response to elastic deformation. The elastic moduli calculated by FEM agree closely with those measured by tensile testing. Finally, the plastically deformed specimens exhibit an increase in misorientation, deformed grains, and subgrain structure formation as measured by electron backscatter diffraction (EBSD).

36 MATERIALS SCIENCE↗

Scale Invariance of Hot Spot Formation in TATB High Explosives

Shock-induced detonation of insensitive high explosives based on 1,3,5-triamino-2,4,6-trinitrobenzene starts with formation of hot spots at microstructural defects but has eluded atomistic modeling treatment at micron length scales. To this end, we performed multimicron scale all-atom molecular dynamics (MD) simulations of hot spots that form during the collapse of cylindrical pores with diameters between 10 and 300 nm. Our MD simulations show that hot spots formed at pores larger than 20 nm exhibit temperature fields with scale-invariant features for sizes up to at least 300 nm. Through a continuum-based grain-scale modeling framework, we span and extend beyond the size scales currently accessible to MD and find that hot spot scale invariance is a general feature that arises when the mechanical strength is insensitive to strain rate. Finally, our results demonstrate the applicability of all-atom MD to simulate the complicated dynamical evolution of micron-sized systems and bolster confidence in insights from MD simulations of materials that exhibit strength with negligible rate dependence over the relevant intervals.

36 MATERIALS SCIENCE↗

A first-principles study of cementite (Fe{sub 3}C) and its alloyed counterparts: Elastic constants, elastic anisotropies, and isotropic elastic moduli

A comprehensive computational study of elastic properties of cementite (Fe{sub 3}C) and its alloyed counterparts (M{sub 3}C (M = Al, Co, Cr, Cu, Fe, Hf, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, W, Zr, Cr{sub 2}FeC and CrFe{sub 2}C) having the crystal structure of Fe{sub 3}C is carried out employing electronic density-functional theory (DFT), all-electron PAW pseudopotentials and the generalized gradient approximation for the exchange-correlation energy (GGA). Specifically, as a part of our systematic study of cohesive properties of solids and in the spirit of materials genome, following properties are calculated: (i) single-crystal elastic constants, C{sub ij}, of above M{sub 3}Cs; (ii) anisotropies of bulk, Young’s and shear moduli, and Poisson’s ratio based on calculated C{sub ij}s, demonstrating their extreme anisotropies; (iii) isotropic (polycrystalline) elastic moduli (bulk, shear, Young’s moduli and Poisson’s ratio) of M{sub 3}Cs by homogenization of calculated C{sub ij}s; and (iv) acoustic Debye temperature, θ{sub D}, of M{sub 3}Cs based on calculated C{sub ij}s. We provide a critical appraisal of available data of polycrystalline elastic properties of alloyed cementite. Calculated single crystal properties may be incorporated in anisotropic constitutive models to develop and test microstructure-processing-property-performance links in multi-phase materials where cementite is a constituent phase.

36 MATERIALS SCIENCE↗