Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗
DOE OSTI2022

Tuning Catalyst Activation and Utilization Via Controlled Electrode Patterning for Low-Loading and High-Efficiency Water Electrolyzers

An anode electrode concept of thin catalyst-coated liquid/gas diffusion layers (CCLGDLs), by integrating Ir catalysts with Ti thin tunable LGDLs with facile electroplating in proton exchange membrane electrolyzer cells (PEMECs), is proposed. The CCLGDL design with only 0.08 mg Ir cm -2 can achieve comparative cell performances to the conventional commercial electrode design, saving ~97% Ir catalyst and augmenting a catalyst utilization to ~24 times. CCLGDLs with regulated patterns enable insight into how pattern morphology impacts reaction kinetics and catalyst utilization in PEMECs. A specially designed two-sided transparent reaction-visible cell assists the in situ visualization of the PEM/electrode reaction interface for the first time. Oxygen gas is observed accumulating at the reaction interface, limiting the active area and increasing the cell impedances. In this work, it is demonstrated that mass transport in PEMECs can be modified by tuning CCLGDL patterns, thus improving the catalyst activation and utilization. The CCLGDL concept promises a future electrode design strategy with a simplified fabrication process and enhanced catalyst utilization. Furthermore, the CCLGDL concept also shows great potential in being a powerful tool for in situ reaction interface research in PEMECs and other energy conversion devices with solid polymer electrolytes.

08 HYDROGEN↗
DOE OSTI2020

Gradient microstructure induced shear band constraint, delocalization, and delayed failure in CuZr nanoglasses

The mechanical properties of metallic glasses (MGs) can be significantly tuned by introducing a nanoscale glass-glass interface microstructure. Here, we design three types of Cu 64 Zr 36 MG seamless gradient microstructures by combining glassy grain sizes from 3 to 15 nm. We perform tensile loading molecular dynamics simulations on the named gradient nanoglasses to characterize their mechanical behavior. In all cases, results indicate the generation of gradient plasticity following the gradient in grain size, i.e. local plasticity increases from large to small grain size regions. Loading parallel to the gradient direction results in initial broad necking followed by catastrophic failure. In contrast, loading perpendicular to the gradient direction results in diffused shear band propagation from large to small grain size regions, delaying the generation of a dominant shear band and further delocalizing plastic deformation. In conclusion, the results demonstrate the synergistic effects generated by heterogeneous gradient designs in the mechanical behavior of metallic glasses.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Electromagnetic and electrostatic emissions at the cusp-magnetosphere interface during substorms

Strongly peaked electrostatic emissions near 10.0 kHz and electromagnetic emissions near 0.56 kHz have been observed by the VLF wave detector on board Imp 6 on crossings from the earth's magnetosphere into the polar cusp during the occurrence of large magnetospheric substorms. The electrostatic emissions were observed to be closely confined to the cusp-magnetosphere interface. The electromagnetic emissions were of somewhat broader spatial extent and were seen on higher-latitude field lines within the cusp. Using these plasma wave observations and additional information provided by plasma, magnetometer and particle measurements made simultaneously on Imp 6, theories are constructed to explain each of the two classes of emission. The electromagnetic waves are modeled as whistlers, and the electrostatic waves as electron-cyclotron harmonics. The resulting growth rates predict power spectra similar to those observed for both emission classes. The electrostatic waves may play a significant role via enhanced diffusion in the relaxation of the sharp substorm time cusp-magnetosphere boundary to a more diffuse quiet time boundary.

Curtis, S. A.↗
NASA NTRS1994

Convection in the Physical Vapor Transport Process: Thermal - 1

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra(sub tau) ranging from 1.80 x 10 to 1.92 x 10(exp 6). Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is to increase the threshold of instability. For typical ground based conditions, time dependent oscillatory convection can occur. This results in unsteady transport, and non-uniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows parametric regions exhibiting both an oscillatory approach to steady state and a chaotic transient to a periodic state. Low gravity conditions stabilize the flow field. Convective effects are effectively reduced, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗
DOE OSTI2023

Boosting the Low-Temperature Performance of Graphite Anodes by Creating an Electrochemically Active Interface

Graphite is the major anode material used in commercial lithium-ion batteries (LIBs). However, the sluggish ion-transfer kinetics associated with graphite anodes significantly restrict the operation of LIBs over a wide temperature. This is primarily due to their low reversible capacity and the substantial overpotential exhibited under low-temperature conditions. To address this limitation, we demonstrate herein an approach that involves grafting an electrochemically active lithium benzenesulfonate layer onto a graphite surface through a typical reduction reaction of diazonium cations, followed by ion exchange process. This surface modification reduces the charge transfer resistance of graphite anodes, leading to an excellent reversible capacity of ~150 mAh g –1 at low-temperatures (-20 °C, 0.1C). Electrochemical impedance spectroscopy indicates that both desolvation of the lithium ions outside the graphite, and lithium diffusion within the solid electrolyte interphase and graphite lattice are two crucial rate-limiting steps during the Li (de)lithiation, with the latter dominating during the low-temperature operation. In conclusion, these findings demonstrate a facile method for enhancing the low-temperature performance of graphite through surface modification and provide valuable insights into fundamental understandings that can guide the future design of better -low-temperature graphite anodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Constructing stable interface layer for boosting high-voltage cycling performance of single-crystal Ni-rich cathodes

Increasing demand for electric vehicles (EVs) worldwide and the requirements for environmental protection have greatly promoted the development of low-Co, Ni-rich layered cathodes due to their high energy density, reasonable cost, and less environmental pollution. Nevertheless, serious performance degradation and safety concerns resulting from structural/interfacial instability under high operating voltages (≥4.3 V) have greatly hindered its commercialization. Herein, we propose a feasible surface modification strategy by introducing a multifunctional Li 2 SiO 3 (LSO) coating layer onto the surface of Co less single-crystalline LiNi 0.63 Co 0.07 Mn 0.3 O 2 (NCM) to solve the above challenges. Additionally, the uniform Li 2 SiO 3 coating layer has a unique three-dimensional (3D) ion diffusion channel, which greatly promotes the transmission of Li + and alleviates interfacial stress accumulation. Equally important, the electrochemically inert Li 2 SiO 3 coating layer has a stable structure framework with strong Si-O bonds, which inhibit anisotropic particle volume expansion and the occurrence of side reactions during long-term cycling. As a consequence, LSO modified NCM exhibits greatly improved electrochemical properties even at harsh testing conditions and achieves capacity retention of 79.1% after 200 cycles at 25°C within 2.95-4.5 V in half cells. Furthermore, it provides an outstanding capacity retention of 94.7% after 300 cycles at 25°C within 2.95-4.4 V when tested in pouch full cells.

25 ENERGY STORAGE↗
DOE OSTI2025

Field‐Relevant Degradation Mechanisms in Metal Halide Perovskite Modules

Field testing, failure analysis, and understanding of degradation mechanisms are essential to advancing metal halide perovskite (MHP) photovoltaic (PV) technology toward commercialization. Here, we present performance data from up to 1 year of outdoor testing of MHP modules in Golden, Colorado. The module encapsulation architecture and encapsulant materials have a significant impact on module reliability, with modules containing a polyolefin elastomer (POE) in addition to a desiccated polyisobutylene (PIB) edge seal outlasting modules with only a PIB edge seal or PIB blanket. Nondestructive and destructive characterization of the field-tested modules points to module scribes and interfaces as areas of potential mechanical weakness and chemical migration, resulting in shunt pathways and increased series resistance. Finally, indoor accelerated stress testing with light and elevated temperatures is performed, demonstrating failure with similar scribe degradation signatures as compared to the field-tested modules. In conclusion, under both outdoor testing and light and elevated temperature conditions, electrochemical corrosion between the copper electrode and the mobile iodine ions appeared dominant, with a significant progression at the scribes that is speculated to result from an interplay between the initial laser damage and joule heating from enhanced ion diffusion under bias.

14 SOLAR ENERGY↗
DOE OSTI2024

Sulfonated polybenzimidazole membrane with graphene oxide additive for 2,3-butanediol/water separation: A molecular simulation

Membrane separation for 2,3-butanediol (2,3-BDO) recovery from fermentation broth is highly valued for sustainable and renewable processes, but it requires efficient membrane materials. Here, this work evaluates the sulfonated polybenzimidazole (sPBI) and its graphene oxide (GO) doped composite membrane for separating 2,3-BDO and water via atomistic simulations. Density functional theory calculations are applied to identify various forms of sPBI structures and quantify their binding interactions with 2,3-BDO and water. Classical molecular dynamic simulations are used to evaluate the structural changes, diffusivity, and selectivity of 2,3-BDO and water in different sPBI models, GO surfaces, and GO-doped sPBI composite models. Our results suggest that sPBI slightly increases the crystallinity of the membrane structures, enhances the adsorption strength for both 2,3-BDO and water, and improves the water/2,3-BDO selectivity by 2–3 times. The GO surfaces display a maximum selectivity at a surface coverage of 0.1–0.15 for both hydroxyl and epoxy surface groups. The addition of GO flakes to sPBI creates new interaction sites for 2,3-BDO and water at the interface of sPBI and GO, and the water/2,3-BDO selectivity of GO-doped sPBI models is further increased up to 3 times. This work illustrates how the integrated addition of sPBI and GO flakes offers a promising approach to selective separation of 2,3-BDO and water, providing theoretical guidance for polybenzimidazole-based membranes in the potential application of 2,3-BDO recovery.

2,3-butanediol↗
DOE OSTI2022

Developments in SRW Code and Sirepo Framework Supporting Simulation of Time-Dependent Coherent X-ray Scattering Experiments

Physical optics simulations for beamlines and experiments are essential for the effective use of synchrotron light source facilities such as NSLS-II at BNL. The SRW software package supports such source-to-detector simulations for coherent X-ray scattering and imaging experiments through its Python interface and Sirepo browser-based graphical user interface. This allows one to define custom sample models, assess the feasibility of an experiment, and estimate most appropriate beamline settings before using valuable beamtime. We discuss the recent use of general-purpose GPU resources and coherent mode decomposition algorithms in SRW to accelerate physical optics simulations with partially coherent X-rays. To illustrate these new capabilities, we describe simulations of typical time series of partially coherent scattering images used in X-ray Photon Correlation Spectroscopy (XPCS) experiments; aiming to characterize the nanoscale dynamics of a disordered sample, representing a solution of nanoparticles undergoing Brownian diffusion.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Kinetic Alfven waves as a source of plasma transport at the dayside magnetopause

As the shocked solar wind with variable plasma density and magnetic field impinges on the dayside magnetopause, it is likely to generate large-scale Alfven waves at the solar wind magnetosphere interface. However, large gradients in the density and magnetic field at the magnetopause boundary effectively couple large-scale Alfven waves with kinetic Alfven waves may play an important role in plasma transport at the dayside magnetopause and in electron acceleration along field lines. The transport can occur because, unlike the magnetohydrodynamic (MHD) shear Alfven wave, the kinetic Alfven wave has an associated parallel electric field which breaks down the 'frozen-in' condition and decouples the plasma from field lines. We calculate the average deviation of the plasma from the field line from which we estimate the diffusion coefficient associated with these 'bundles' of lead to acceleration of electrons along field lines in the magnetopause boundary and may possibly provide an explanation for observed counterstreaming electron beams characterized by energies of 50-200 eV.

Lee, L. C.↗
DOE OSTI2021

Knowledge Beacons: Web services for data harvesting of distributed biomedical knowledge

The continually expanding distributed global compendium of biomedical knowledge is diffuse, heterogeneous and huge, posing a serious challenge for biomedical researchers in knowledge harvesting: accessing, compiling, integrating and interpreting data, information and knowledge. In order to accelerate research towards effective medical treatments and optimizing health, it is critical that efficient and automated tools for identifying key research concepts and their experimentally discovered interrelationships are developed. As an activity within the feasibility phase of a project called “Translator” (https://ncats.nih.gov/translator) funded by the National Center for Advancing Translational Sciences (NCATS) to develop a biomedical science knowledge management platform, we designed a Representational State Transfer (REST) web services Application Programming Interface (API) specification, which we call a Knowledge Beacon. Knowledge Beacons provide a standardized basic API for the discovery of concepts, their relationships and associated supporting evidence from distributed online repositories of biomedical knowledge. This specification also enforces the annotation of knowledge concepts and statements to the NCATS endorsed the Biolink Model data model and semantic encoding standards (https://biolink.github.io/biolink-model/). Implementation of this API on top of diverse knowledge sources potentially enables their uniform integration behind client software which will facilitate research access and integration of biomedical knowledge.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
NASA NTRS2010

Material Properties of Three Candidate Elastomers for Space Seals Applications

A next-generation docking system is being developed by the National Aeronautics and Space Administration (NASA) to support Constellation Space Exploration Missions to low Earth orbit (LEO), to the Moon, and to Mars. A number of investigations were carried out to quantify the properties of candidate elastomer materials for use in the main interface seal of the Low Impact Docking System (LIDS). This seal forms the gas pressure seal between two mating spacecraft. Three candidate silicone elastomer compounds were examined: Esterline ELA-SA-401, Parker Hannifin S0383-70, and Parker Hannifin S0899-50. All three materials were characterized as low-outgassing compounds, per ASTM E595, so as to minimize the contamination of optical and solar array systems. Important seal properties such as outgas levels, durometer, tensile strength, elongation to failure, glass transition temperature, permeability, compression set, Yeoh strain energy coefficients, coefficients of friction, coefficients of thermal expansion, thermal conductivity and diffusivity were measured and are reported herein.

Bastrzyk, Marta B.↗
DOE OSTI2026

Lithium–Divertor Interactions and Helium/Hydrogen Trapping in Lithiated Metals (Final Technical Report)

The goal of this project was to develop a fundamental understanding of helium and hydrogen behavior in lithium, both in bulk and at interfaces with tungsten, in order to inform the design of lithium based plasma facing components for fusion devices. Over the course of the award, the project produced the first comprehensive, peer reviewed dataset describing helium energetics, migration behaviors, and defect interactions in lithium. The research demonstrated that helium behaves in ways not previously observed in any other body centered cubic (BCC) metal: its interstitial configurations are more stable than substitutional ones, and its migration barriers are extraordinarily low, in some cases more than an order of magnitude below those in tungsten or iron. These discoveries reveal that helium in lithium diffuses so rapidly that its transport may be dominated by translational motion rather than the vibrationally activated mechanisms that underpin conventional solid state diffusion. This work lays a scientific foundation for understanding gas retention, bubble formation, and wall evolution in lithium based fusion environments and provides new computational tools, most notably a newly developed Li–He interatomic potential, for advancing future modeling efforts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

WellPINN: Accurate Well Representation for Transient Fluid Pressure Diffusion in Subsurface Reservoirs With Physics‐Informed Neural Networks

Accurate representation of pumping wells is essential for reliable reservoir characterization and simulation of operational scenarios in subsurface flow models. Physics-informed neural networks (PINNs) are emerging as a promising alternative to numerical models for reservoir modeling, offering seamless integration of monitoring data and governing physical equations. However, existing PINN-based studies face major challenges in capturing fluid pressure near wells when using a source/sink term, particularly during the early stages after pumping begins. We address this problem by introducing WellPINN, a workflow in which an initially trained PINN infers fluid pressure across the entire reservoir domain using a large equivalent well radius. This initial PINN solution is then locally refined around the well by a set of subdomain PINNs that are trained for smaller equivalent well radii. Continuity across these subdomain interfaces as well as at the initial condition is ensured by hard-constraining each PINN on its subdomain boundary. Our results demonstrate WellPINN as the first workflow of its kind to focus on accurate inference of fluid pressure from pumping rates throughout the entire injection period, significantly advancing the potential of PINNs for inverse modeling and operational scenario simulations. All data and code for this paper are openly available at https://doi.org/10.20350/DIGITALCSIC/17260.

58 GEOSCIENCES↗
NASA NTRS2008

Boundary-Layer-Ingesting Inlet Flow Control

An experimental study was conducted to provide the first demonstration of an active flow control system for a flush-mounted inlet with significant boundary-layer-ingestion in transonic flow conditions. The effectiveness of the flow control in reducing the circumferential distortion at the engine fan-face location was assessed using a 2.5%-scale model of a boundary-layer-ingesting offset diffusing inlet. The inlet was flush mounted to the tunnel wall and ingested a large boundary layer with a boundary-layer-to-inlet height ratio of 35%. Different jet distribution patterns and jet mass flow rates were used in the inlet to control distortion. A vane configuration was also tested. Finally a hybrid vane/jet configuration was tested leveraging strengths of both types of devices. Measurements were made of the onset boundary layer, the duct surface static pressures, and the mass flow rates through the duct and the flow control actuators. The distortion and pressure recovery were measured at the aerodynamic interface plane. The data show that control jets and vanes reduce circumferential distortion to acceptable levels. The point-design vane configuration produced higher distortion levels at off-design settings. The hybrid vane/jet flow control configuration reduced the off-design distortion levels to acceptable ones and used less than 0.5% of the inlet mass flow to supply the jets.

Owens, Lewis R.↗
DOE OSTI2021

Nanoscale Turing patterns in a bismuth monolayer

Turing’s reaction–diffusion theory of morphogenesis has been very successful for understanding macroscopic patterns within complex objects ranging from biological systems to sand dunes. However, Turing patterns on microscopic length scales are extremely rare. Here we show that a strained atomic bismuth monolayer assembled on the surface of NbSe 2 —and subject to interatomic interactions and kinetics—displays Turing patterns. Our reaction–diffusion model produces stripe patterns with a period of five atoms (approximately 2 nm) and domain walls with Y-shaped junctions that bear a striking resemblance to what has been experimentally observed. Our work establishes that Turing patterns can occur at the atomic scale in a hard condensed-matter setting.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Reaction layer formation at the graphite/copper-chromium alloy interface

Sessile drop tests were used to obtain information about copper chromium alloys that suitably wet graphite. Characterization of graphite/copper-chromium alloy interfaces subjected to elevated temperatures were conducted using scanning electron micrography, energy dispersive spectroscopy, auger electron spectroscopy, and x ray diffraction analyses. These analyses indicate that during sessile drop tests conducted at 1130 C for one hour, copper alloys containing greater than 0.98 percent chromium form continuous reaction layers of approximately 10 micron thickness. The reaction layers adhere to the graphite surface. The copper wets the reaction layer to form a contact angle of 60 degrees or less. X ray diffraction results indicate that the reaction layer is chromium carbide. The kinetics of reaction layer formation were modelled in terms of bulk diffusion mechanisms. Reaction layer thickness is controlled initially by the diffusion of Cr out of Cu alloy and later by the diffusion of C through chromium carbide.

Devincent, Sandra M.↗