Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “incentive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Analysis of fuel system technology for broad property fuels

An analytical study was performed in order to assess relative performance and economic factors involved with alternative advanced fuel systems for future commercial aircraft operating with broad property fuels. Significant results, with emphasis on design practicality from the engine manufacturer' standpoint, are highlighted. Several advanced fuel systems were modeled to determine as accurately as possible the relative merits of each system from the standpoint of compatibility with broad property fuel. Freezing point, thermal stability, and lubricity were key property issues. A computer model was formulated to determine the investment incentive for each system. Results are given.

Coffinberry, G. A.↗

Computer analysis of effects of altering jet fuel properties on refinery costs and yields

This study was undertaken to evaluate the adequacy of future U.S. jet fuel supplies, the potential for large increases in the cost of jet fuel, and to what extent a relaxation in jet fuel properties would remedy these potential problems. The results of the study indicate that refiners should be able to meet jet fuel output requirements in all regions of the country within the current Jet A specifications during the 1990-2010 period. The results also indicate that it will be more difficult to meet Jet A specifications on the West Coast, because the feedstock quality is worse and the required jet fuel yield (jet fuel/crude refined) is higher than in the East. The results show that jet fuel production costs could be reduced by relaxing fuel properties. Potential cost savings in the East (PADDs I-IV) through property relaxation were found to be about 1.3 cents/liter (5 cents/gallon) in January 1, 1981 dollars between 1990 and 2010. However, the savings from property relaxation were all obtained within the range of current Jet A specifications, so there is no financial incentive to relax Jet A fuel specifications in the East. In the West (PADD V) the potential cost savings from lowering fuel quality were considerably greater than in the East. Cost savings from 2.7 to 3.7 cents/liter (10-14 cents/gallon) were found. In contrast to the East, on the West Coast a significant part of the savings was obtained through relaxation of the current Jet A fuel specifications.

Breton, T.↗

Space Shuttle, private enterprise and intellectual properties in the context of space manufacturing

It is a national policy to make the capabilities of the Space Transportat ion System available to a wide range of potential users. This includes its availability as a space manufacturing facility for commercial activities, which may be carried out on a reimbursable basis or as a joint endeavor with NASA, but with substantial private investment. In any high risk, long lead-time research and development activity directed towards commercialization, the protection afforded the results of the research and development under the laws relating to intellectual property rights may provide an important incentive for private investment. The paper reviews NASA's policies and practices for the protection of privately-established intellectual property rights involved in STS use, with particular emphasis on reimbursable launch agreements and joint endeavor agreements.

Hosenball, S. N.↗

Materials processing in space; Proceedings of the Special Conference, Cincinnati, OH, May 4, 5, 1982

An international review of materials processing in space is provided, taking into account the NASA materials processing in space program, European activities in the field of microgravity research, and Japanese material processing tests in space. The subjects considered are related to materials processing in a microgravity environment, industrial and university applications and involvement, and challenges and prospectives of microgravity research in space. Attention is given to a review of the containerless processing technologies and facilities, glass research in space, bubble behavior in molten glass in a temperature gradient, semiconductor crystal growth and segregation problems on earth and space, seeded crystal growth of pseudobinary systems with large liquidus-solidus separation, avenues and incentives for commercial use of a low-gravity environment, and the Universities Space Research Association and its role in the materials processing in space program.

Dunbar, B. J.↗

Legal considerations and cooperative opportunities for space commercial activities

It is a national policy to make the capabilities of the Space Transportation System available to a wide range of potential users. This includes its availability as a space manufacturing facility for commercial activities, which may be carried out on a reimbursable basis or as a joint endeavor with NASA, but with substantial private investment. In any high risk, long lead-time research and development activity directed towards commercialization, the protection afforded the results of the research and development under the laws relating to intellectual property rights may provide an important incentive for private investment. The policies and practices of NASA directed towards the protection of privately-established intellectual property rights involved in STS use are reviewed with particular emphasis on reimbursable launch agreements and joint endeavor agreements.

Hosenball, S. N.↗

Prototype wash water renovation system integration with government-furnished wash fixture

The requirements of a significant quantity of proposed life sciences experiments in Shuttle payloads for available wash water to support cleansing operations has provided the incentive to develop a technique for wash water renovation. A prototype wash water waste renovation system which has the capability to process the waste water and return it to a state adequate for reuse in a typical cleansing fixture designed to support life science experiments was investigated. The resulting technology is to support other developments efforts pertaining to water reclamation by serving as a pretreatment step for subsequent reclamation procedures.

Source record↗

Modeling solar magnetic structures

Some ideas in the theoretical study of force-free magnetic fields and magnetostatic fields, which are relevant to the effort of using magnetograph data as inputs to model the quasi-static, large-scale magnetic structures in the solar atmosphere are discussed. Basic physical principles will be emphasized. An attempt will be made to assess what we may learn, physically, from the models based on these ideas. There is prospect for learning useful physics and this ought to be an incentive for intensifying the efforts to improve vector magnetograph technology and to solve the basic radiative-transfer problems encountered in the interpretation of magnetograph raw data.

Low, B. C.↗

SONTRAC: A solar neutron track chamber detector

The recent detection on the solar maximum mission (SMM) satellite of high energy neutrons emitted during large solar flares has provided renewed incentive to design a neutron detector which has the sensitivity, energy resolution, and time resolution to measure the neutron time and energy spectra with sufficient precision to improve our understanding of the basic flare processes. Over the past two decades a variety of neutron detectors has been flown to measure the atmospheric neutron intensity above 10 MeV and to search for solar neutrons. The SONTRAC (Solar Neutron Track Chamber) detector, a new type of neutron detector which utilizes n-p scattering and has a sensitivity 1-3 orders of magnitude greater than previous instruments in the 20-200 MeV range is described. The energy resolution is 1% for neutron kinetic energy, T sub n 50 MeV. When used with a coded aperture mask at 50 m (as would be possible on the space station) an angular resolution of approx. 4 arc sec could be achieved, thereby locating the sites of high energy nuclear interactions with an angular precision comparable to the existing x-ray experiments on SMM. The scintillation chamber is investigated as a track chamber for high energy physics, either by using arrays of scintillating optical fibers or by optical imaging of particle trajectories in a block of scintillator.

Frye, G. M., Jr.↗

Contractor and government - Teamwork and commitment

Procedures being implemented at NASA to improve cooperation with contractors and increase productivity are reviewed from the NASA point of view. The goals of the U.S. space program for the coming 25 years are listed, and the importance of the commercial utilization of space in these plans is stressed. Consideration is given to the ongoing American Productivity Center White-Collar Productivity-Improvement Project, the implementation of the recommendations of the 1984 NASA/Contractor Conferences in present and future contracts, and the use of incentive contracts to create situations in which both NASA and the contractor benefit from increased productivity. Future plans call for increased industry responsibility in managing and operating the STS; steamlining of Shuttle operations; advanced design-to-cost procedures, increased commonality, better NASA-contractor communications, and more use of CAD/CAM and robotics for the Space Station; and accommodation of greatly expanded private investment and exploitation of space.

Griffin, G. D.↗

Streamlining: Reducing costs and increasing STS operations effectiveness

The development of streamlining as a concept, its inclusion in the space transportation system engineering and operations support (STSEOS) contract, and how it serves as an incentive to management and technical support personnel is discussed. The mechanics of encouraging and processing streamlining suggestions, reviews, feedback to submitters, recognition, and how individual employee performance evaluations are used to motivation are discussed. Several items that were implemented are mentioned. Information reported and the methodology of determining estimated dollar savings are outlined. The overall effect of this activity on the ability of the McDonnell Douglas flight preparation and mission operations team to support a rapidly increasing flight rate without a proportional increase in cost is illustrated.

Petersburg, R. K.↗

Analytical Ultrasonics in Materials Research and Testing

Research results in analytical ultrasonics for characterizing structural materials from metals and ceramics to composites are presented. General topics covered by the conference included: status and advances in analytical ultrasonics for characterizing material microstructures and mechanical properties; status and prospects for ultrasonic measurements of microdamage, degradation, and underlying morphological factors; status and problems in precision measurements of frequency-dependent velocity and attenuation for materials analysis; procedures and requirements for automated, digital signal acquisition, processing, analysis, and interpretation; incentives for analytical ultrasonics in materials research and materials processing, testing, and inspection; and examples of progress in ultrasonics for interrelating microstructure, mechanical properites, and dynamic response.

Vary, A.↗

Kelvin-Helmholtz instability at the magnetopause boundary

An MHD model is defined for the convective Kelvin-Helmholtz instability (CKHI) which satellite data indicates produces vortices in the near-earth region of the plasma sheet through turbulence caused by shear flow. The MHD equations are solved as an initial value problem, which reveals that the CKHI growth rate is the same as that of the periodic KHI (PKHI). However, the CKHI is not as limited in the range of amplitude as is the PKHI, which experiences stability in nonlinear growth because of the periodic characteristics of the growth. A perpendicularly moving CKHI can produce a large vortex flow and shocks off the vortex boundary. The satellite data indicate that the vortices are in the size range of 10-20 earth radii. Additional effects can include the expulsion of magnetic flux and the formation of the boundary layer. The success of the model up to the point of formation of the boundary layer is taken as an incentive for further model development using more realistic magnetospheric data.

Wu, C. C.↗

The structural optimization of a spreader bar for twin lift helicopter operations

An optimization study was performed to develop a minimum weight spreader bar to allow two helicopters to lift the same payload. With this arrangement, the maximum payload that can be lifted is almost doubled without the expense of designing and building a new helicopter. The concept has had some limited use by civil helicopter operators using small helicopters and has been demonstrated in large scale by two CH-54's which successfully lifted a total load of 20 ton. To this point, rather heavy available beams or tower structures have been used for the spreader bar. Since the weight of the bar not only detracts from payload but also adds to the logistics problem, there are more than the usual incentives to minimize weight. Since the design requirement is for classic beam column with uniform side loads resulting from bar weight and aerodynamic drag, the design problem is particularly amenable to optimization. A study has been performed at Sikorsky to establish the minimum weight for a spreader bar sized to carry a load equal to the capacity of two Army BLACK HAWK helicopters. Toward this end, a computer program was written to analyze the spreader bar deflections and stresses and coupled to the NASA developed CONMIN optimization routines.

Dobyns, A.↗

Automatic systems and the low-level wind hazard

Automatic flight control systems provide means for significantly enhancing survivability in severe wind hazards. The technology required to produce the necessary control algorithms is available and has been made technically feasible by the advent of digital flight control systems and accurate, low-noise sensors, especially strap-down inertial sensors. The application of this technology and these means has not generally been enabled except for automatic landing systems, and even then the potential has not been fully exploited. To fully exploit the potential of automatic systems for enhancing safety in wind hazards requires providing incentives, creating demand, inspiring competition, education, and eliminating prejudicial disincentitives to overcome the economic penalties associated with the extensive and riskly development and certification of these systems. If these changes will come about at all, it will likely be through changes in the regulations provided by the certifying agencies.

Schaeffer, Dwight R.↗

Commercialization of materials processing in space

NASA research to date on materials processing in space (MPS) has revealed that microgravity conditions to a large degree eliminate normal convection, sedimentation, buoyancy, and deformations due to gravity, and permit the exploration of containerless processing. The goals of current NASA MPS work is to augment the fundamental database on MPS and to foster commercial participation in MPS. Techniques being applied by NASA to fulfill the latter goal are described, including technical exchange, industrial guest investigator and joint endeavor agreements, and tangible market incentives. Guidelines for each type of agreement are summarized.

Yost, Charles F.↗

NASA's new technology reporting system: A review and future prospects

A systematic effort is made to describe how NASA's new technology reporting system operates today, and how that system might be enhanced. The system is documented in terms of organization, operational practices, and other program benefits. Identified and assessed are incentives or disincentives to reporting, program management, program follow through, and the feasibility of various means for improving the general process. NASA has the only system in the Federal Government for capturing and disseminating new technology developed under its sponsorship of research and development. This system can be improved in many ways, some of which require additional resources and/or more senior management attention, but many of which can be instituted within the authority of the leadership of the Technology Utilization program. The suggested options and actions presented are mutually compatible. Any single action will contribute to improving the process. However, the first and most important step is undoubtedly to gain senior management's attention to the central role played by a vigorous new technology reporting system in the success and value of NASA's broader technology utilization and technology transfer activities.

Chapman, Richard L.↗

Real-time space system control with expert systems

Many aspects of space system operations involve continuous control of real time processes. These processes include electrical power system monitoring, prelaunch and ongoing propulsion system health and maintenance, environmental and life support systems, space suit checkout, onboard manufacturing, and vehicle servicing including satellites, shuttles, orbital maneuvering vehicles, orbital transfer vehicles and remote teleoperators. Traditionally, monitoring of these critical real time processes has been done by trained human experts monitoring telemetry data. However, the long duration of future space missions and the high cost of crew time in space creates a powerful economic incentive for the development of highly autonomous knowledge based expert control procedures for these space systems.

Leinweber, David↗

Debarment and suspension

The changing Government attitude toward contractor debarment and suspension is examined, with emphasis on the fact that the Government is more alert to fraud, waste, and abuse. Consideration is given to causes of debarment or suspension, procedures and due process hearings, settlement agreements, compliance programs, and recent related legislation. It is concluded that the change in the Government contracting environment in recent years should be sufficient incentive for contractors to monitor their operations more closely.

Whelan, Thomas J.↗