Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1947

Flight Tests of Rocket-Powered "Tin-Can" Models of AAF Project MX-800

Flight tests were made of six noninstrumented rocket-powered "Tin Can" models of AAF Project MX-800. Velocity and drag data were obtained by use of CU Doppler radar. The existence of stability and adequate structural strength for flight near zero lift was checked by visual and photographic observation. Drag data obtained during the tests agreed reasonably well with estimates based on experimental data from NACA RM-2 rocket-powered drag research models.

Purser, Paul E.↗
NASA NTRS1995

Spread Across Liquids: The World's First Microgravity Combustion Experiment on a Sounding Rocket

The Spread Across Liquids (SAL) experiment characterizes how flames spread over liquid pools in a low-gravity environment in comparison to test data at Earth's gravity and with numerical models. The modeling and experimental data provide a more complete understanding of flame spread, an area of textbook interest, and add to our knowledge about on-orbit and Earthbound fire behavior and fire hazards. The experiment was performed on a sounding rocket to obtain the necessary microgravity period. Such crewless sounding rockets provide a comparatively inexpensive means to fly very complex, and potentially hazardous, experiments and perform reflights at a very low additional cost. SAL was the first sounding-rocket-based, microgravity combustion experiment in the world. It was expected that gravity would affect ignition susceptibility and flame spread through buoyant convection in both the liquid pool and the gas above the pool. Prior to these sounding rocket tests, however, it was not clear whether the fuel would ignite readily and whether a flame would be sustained in microgravity. It also was not clear whether the flame spread rate would be faster or slower than in Earth's gravity.

Source record↗
NASA NTRS2013

Trajectory Reconstruction and Uncertainty Analysis Using Mars Science Laboratory Pre-Flight Scale Model Aeroballistic Testing

As part of the Mars Science Laboratory (MSL) trajectory reconstruction effort at NASA Langley Research Center, free-flight aeroballistic experiments of instrumented MSL scale models was conducted at Aberdeen Proving Ground in Maryland. The models carried an inertial measurement unit (IMU) and a flush air data system (FADS) similar to the MSL Entry Atmospheric Data System (MEADS) that provided data types similar to those from the MSL entry. Multiple sources of redundant data were available, including tracking radar and on-board magnetometers. These experimental data enabled the testing and validation of the various tools and methodologies that will be used for MSL trajectory reconstruction. The aerodynamic parameters Mach number, angle of attack, and sideslip angle were estimated using minimum variance with a priori to combine the pressure data and pre-flight computational fluid dynamics (CFD) data. Both linear and non-linear pressure model terms were also estimated for each pressure transducer as a measure of the errors introduced by CFD and transducer calibration. Parameter uncertainties were estimated using a "consider parameters" approach.

Lugo, Rafael A.↗
NASA NTRS2015

Transonic Investigation of Two-Dimensional Nozzles Designed for Supersonic Cruise

An experimental and computational investigation has been conducted to determine the off-design uninstalled drag characteristics of a two-dimensional convergent-divergent nozzle designed for a supersonic cruise civil transport. The overall objectives were to: (1) determine the effects of nozzle external flap curvature and sidewall boattail variations on boattail drag; (2) develop an experimental data base for 2D nozzles with long divergent flaps and small boattail angles and (3) provide data for correlating computational fluid dynamic predictions of nozzle boattail drag. The experimental investigation was conducted in the Langley 16-Foot Transonic Tunnel at Mach numbers from 0.80 to 1.20 at nozzle pressure ratios up to 9. Three-dimensional simulations of nozzle performance were obtained with the computational fluid dynamics code PAB3D using turbulence closure and nonlinear Reynolds stress modeling. The results of this investigation indicate that excellent correlation between experimental and predicted results was obtained for the nozzle with a moderate amount of boattail curvature. The nozzle with an external flap having a sharp shoulder (no curvature) had the lowest nozzle pressure drag. At a Mach number of 1.2, sidewall pressure drag doubled as sidewall boattail angle was increased from 4deg to 8deg. Reducing the height of the sidewall caused large decreases in both the sidewall and flap pressure drags. Summary

Capone, Francis J.↗
NASA NTRS2017

Prediction of Turbulent Temperature Fluctuations in Hot Jets

Large-eddy simulations (LES) were used to investigate turbulent temperature fluctuations and turbulent heat flux in hot jets. A high-resolution finite-difference Navier-Stokes solver was used to compute the flow from a 2-inch round nozzle. Three different flow conditions of varying jet Mach numbers and temperature ratios were examined. The LES results showed that the temperature field behaves similar to the velocity field, but with a more rapidly spreading mixing layer. Predictions of mean, mu-bar(sub i), and fluctuating, mu'(sub i), velocities were compared to particle image velocimetry data. Predictions of mean, T-bar, and fluctuating, T', temperature were compared to data obtained using Rayleigh scattering and Raman spectroscopy. Very good agreement with experimental data was demonstrated for the mean and fluctuating velocities. The LES correctly predicts the behavior of the turbulent temperature field, but over-predicts the levels of the fluctuations. The turbulent heat flux was examined and compared to Reynolds-averaged Navier-Stokes (RANS) results. The LES and RANS simulations produced very similar results for the radial heat flux. However, the axial heat flux obtained from the LES differed significantly from the RANS result in both structure and magnitude, indicating that the gradient diffusion type model in RANS is inadequate. Finally, the LES data was used to compute the turbulent Prandtl number and verify that a constant value of 0.7 used in the RANS models is a reasonable assumption.

hot jets↗
NASA NTRS2020

CFD Predictions of Soot & CO Emissions Generated by a Partially-Fueled 9-Element Lean-Direct Injection Combustor

A study was undertaken to investigate the CO & soot emissions generated by a partially-fueled 9- element LDI (Lean-Direct Injection) combustor configuration operating in the idle range of jet engine conditions. In order to perform the CFD analysis, several existing soot/chemistry models were implemented into the OpenNCC (Open National Combustion Code). The calculations were based on a Reynolds-Averaged Navier Stokes (RANS) simulation with standard k-epsilon turbulence model, a 62- species jet-a/air chemistry, a 2-equation soot model, & a Lagrangian spray solver. A separate transport equation was solved for all individual species involved in jet-a/air combustion. In the test LDI configuration we examined, only five of the nine injectors were fueled with the major pilot injector operating at an equivalence ratio of near one and the other four main injectors operating at an equivalence ratio near 0.55. The calculations helped to identify several reasons behind the soot & CO formation in different regions of the combustor. The predicted results were compared with the reported experimental data on soot mass concentration (SMC) & emissions index of CO (EICO). The experimental results showed that an increase in either T3 and/or F/A ratio lead to a reduction in both EICO & SMC. The predicted results were found to be in reasonable agreement. However, the predicted EICO differed substantially in one test condition associated with higher F/A ratio.

Raju, M. S.↗
NASA NTRSDate not supplied

Calorimeter Heat Flux Trends in NASA’s Subscale Rotating Detonation Rocket Engine

A calorimeter-style rotating detonation rocket engine (RDRE) outer chamber body was designed, additively manufactured in GRCop-42, and hot-fire tested in test cell 105 at NASA Marshall Space Flight Center (MSFC) in Huntsville, AL in August 2024. Steady-state, spatially resolved heat flux and chamber pressure were measured at 13 and 9 locations from the injector face, respectively, for a variety of test conditions and hardware configurations with gaseous methane and oxygen propellants. The 2-in. diameter highly instrumented design, enabled by metal additive manufacturing (AM), allowed for simultaneous measurement of heat flux and chamber pressure through 44 long duration hot-fire tests without failure. Of the 44 tests, only 3 of the tests featured chamber pressures below 100 psia and are discussed in this work. Heat flux trends for this subscale hardware are explored with respect to local propellant mass flux for several different injectors, chamber lengths, and chamber “subsonic” area ratios (contraction ratios). Results show that for increasing chamber pressure, a reduced amount of energy per kilogram of propellant is transferred to the wall. Switching injectors affects the near-face heat flux and chamber pressure profiles. Chamber length does not noticeably affect the heat flux profile but increases bulk heat load. A subsonic area ratio greater than 1 reduces heat losses to the wall compared to a straight annulus case. Equivalence ratio shift did not significantly affect heat flux. Computational fluid dynamics (CFD) and conjugate heat transfer (CHT) analyses were performed to delineate 3-D heat transfer and coolant mass flow maldistribution effects and create a calorimeter transfer function to transform heat flux data and mitigate the profile distortions. Additional CFD/CHT simulations were performed using experimental data as boundary conditions to assess local nucleate boiling propensity during testing and to assess projected hot wall temperatures for future fatigue assessment. Vapor fractions were observed locally for several cases. It is anticipated that this effort will provide a common framework for coolant system design/analysis in calorimeter systems for rocket-based and air-breathing combustors, ensuring greater repeatability in calorimetry measurements across the research community.

Joseph Hernandez-McCloskey↗
NASA NTRS1992

Requirements for facilities and measurement techniques to support CFD development for hypersonic aircraft

The design of a hypersonic aircraft poses unique challenges to the engineering community. Problems with duplicating flight conditions in ground based facilities have made performance predictions risky. Computational fluid dynamics (CFD) has been proposed as an additional means of providing design data. At the present time, CFD codes are being validated based on sparse experimental data and then used to predict performance at flight conditions with generally unknown levels of uncertainty. This paper will discuss the facility and measurement techniques that are required to support CFD development for the design of hypersonic aircraft. Illustrations are given of recent success in combining experimental and direct numerical simulation in CFD model development and validation for hypersonic perfect gas flows.

Sellers, William L., III↗
NASA NTRSDate not supplied

Implicit Large-Eddy Simulations of Compressible Mixing Layers

Implicit large-eddy simulations of the self-similar regions of two compressible mixing layers at high Reynolds number and convective Mach numbers of 0.381 and 0.690 were carried out. Experimental data was used as the input into a synthetic eddy method turbulent inflow boundary condition to initiate simulations. Computational grids with nearly isotropic cells were used and the grid counts ranged from 24 to 270 million points. Agreement with experimental velocity and Reynolds stress data was good given the simplifications of the simulation. The decrease in mixing layer growth rate with increasing compressibility compares well with the literature. Budgets for the Reynolds stress transport equation were extracted from the simulations. It was demonstrated that the grids used did not resolve the dissipation term at the experimental Reynolds number. However, low Reynolds number simulations indicate that the numerical dissipation replaces the physical dissipation and the dissipation term in the transport equation can be represented by the summation term that quantifies the imbalance in the budget. The budgets for the high Reynolds number mixing layers agree well with previous low Reynolds number studies; indicating that the primary mechanism for the reduced growth rate and increased anistropy of the Reynolds stress tensor due to compressibility is a reduction in the pressure-strain and production terms. A new scaling based on the magnitude of the Reynolds stress tensor is proposed. This scaling provides better relative comparisons between the data and shows that the decrease in pressure-strain in the shear component is the primary driver in reducing the transverse normal stress.

turbulence↗
NASA NTRS1973

Estimation of rate constants of elementary processes - A review of the state of the art.

'Thermochemical kinetics,' the codification and extrapolation of empirical observations, as applied to certain elementary reactions of importance to combustion studies, is described. This approach allows the critical scrutiny of experimental data in areas where sufficient previous data exist, while, at the same time, illuminating those key areas where more experimentation is crucial. It is shown that combination of transition-state theory with an understanding of the molecular basis of entropy puts fairly rigid constraints on the values of the Arrhenius A-factor for most reactions. This, in turn, means that the activation energy is often the key datum that is missing, and that such data can be obtained with some degree of confidence, even from measurements of rate constants at only one temperature. In complex mechanisms, it is often possible to distinguish among alternate pathways and pinpoint key processes.

Golden, D. M.↗
NASA NTRS1979

Undisturbed flowfield and turbulent heat-transfer analysis on the Space Shuttle external tank

The paper analyzes the existing undisturbed flowfield and turbulent heat-transfer data on smooth models of the Space Shuttle external tank and extends the mathematical model for theoretical calculation of heat-transfer rates presented in an earlier paper to include both the external tank barrel and ogive sections at zero and nonzero angles of attack. Experimental data have been obtained from various wind tunnels which simulated the continuum flow regime in the Shuttle flight trajectory. The model data have been compared with theoretical predictions using realistic flowfields and well-known empirical heat-transfer relationships. The results show that the predictions are good to within the experimental uncertainties of the measured data.

Praharaj, S. C.↗
NASA NTRS1991

Radiation Modeling with Direct Simulation Monte Carlo

Improvements in the modeling of radiation in low density shock waves with direct simulation Monte Carlo (DSMC) are the subject of this study. A new scheme to determine the relaxation collision numbers for excitation of electronic states is proposed. This scheme attempts to move the DSMC programs toward a more detailed modeling of the physics and more reliance on available rate data. The new method is compared with the current modeling technique and both techniques are compared with available experimental data. The differences in the results are evaluated. The test case is based on experimental measurements from the AVCO-Everett Research Laboratory electric arc-driven shock tube of a normal shock wave in air at 10 km/s and .1 Torr. The new method agrees with the available data as well as the results from the earlier scheme and is more easily extrapolated to di erent ow conditions.

Carlson, Ann B.↗
NASA NTRS1986

Supersonic full-potential method applied to missile bodies

The NCOREL full-potential method with an entropy correction is presently applied to supersonic missile flowfield problems. After defining the salient characteristics of the method, a combination of linear theory with NCOREL and experimental data is used to isolate the nonlinear features of the supersonic flow so that the influence of geometry and flow conditions on the development of such flow nonlinearities can be appreciated. Comparisons of experimental longitudinal force and moment data with NCOREL and various linear theory predictions are presented for several generic missile airframe configurations of circular and elliptic cross section. The NCOREL code solves the nonconservative full potential equation in a spherical coordinate system; exact boundary conditions are defined on the missile surface.

Pittman, J. L.↗
NASA NTRS1992

Residual acceleration data analysis for Spacelab missions

A two-level reduction plan is developed analytically with references to existing experimental data that can be used to develop accelerometer databases for postflight experiment analyses. Residual-acceleration data from previous experiments are studied with attention given to the differences in magnitude among the databases. First-level processing is based on the identification of instances in which tolerable acceleration levels are exceeded so that the time intervals requiring further scrutiny are found. Acceleration time histories including magnitude and orientation are utilized with frequency data for the second level of processing, and the data required for a given time window are reduced by means of data decimation. The identification and processing of limited windows of acceleration data facilitates the characterization of the acceleration environment. These characterizations are of use in the design, location, and utilization of low-gravity laboratory equipment.

Rogers, Melissa J. B.↗
NASA NTRS1984

Solar-cell interconnect design for terrestrial photovoltaic modules

Useful solar cell interconnect reliability design and life prediction algorithms are presented, together with experimental data indicating that the classical strain cycle (fatigue) curve for the interconnect material does not account for the statistical scatter that is required in reliability predictions. This shortcoming is presently addressed by fitting a functional form to experimental cumulative interconnect failure rate data, which thereby yields statistical fatigue curves enabling not only the prediction of cumulative interconnect failures during the design life of an array field, but also the quantitative interpretation of data from accelerated thermal cycling tests. Optimal interconnect cost reliability design algorithms are also derived which may allow the minimization of energy cost over the design life of the array field.

Mon, G. R.↗
NASA NTRS1974

Design method for minimizing RF voltage breakdown

Research study was conducted and results were published. Using principles of similarity and minimum of experimental data, a number of universal curves have been constructed covering wide range of experimental parameters. Gases other than air, such as argon and carbon dioxide, also are included in study.

Woo, R. T.↗
NASA NTRS1972

Aerodynamic characteristics of the Scout 133R vehicle determined from wind tunnel tests

Bending moments and other associated parameters were measured on a Scout vehicle during a launch through high velocity horizontal winds. Comparison of the measured data with predictions revealed some unexplained discrepancies. Possible sources of error in the experimental data and predictions were considered; one of which is the predicted aerodynamic characteristics. A wind tunnel investigation was initiated, including supersonic force and pressure tests, to better define the aerodynamics. In addition to basic aerodynamic coefficients from the force test, detailed pressure and load distributions along the body were established from the pressure test. Pressure coefficients were integrated to determine normal load distributions, total normal force, and total pitching moment of the body. Comparison of the normal forces from pressure and force tests resulted in agreement within 15%. Comparison of pitching moment data from the two tests resulted in larger differences.

Abramson, F. B.↗