Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error correction.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Spectral Polarization Distribution Models (PDMs) for NASA CLARREO Pathfinder’s Inter-Calibration Applications

Solar radiation scattered by Earth surfaces of various scene types such as oceans, deserts, tree leaves etc and atmospheric molecules and particles is polarized and the amount of polarization depends on the surface composition and particle physical properties. This can be a source of measurement errors in satellite data if a non-polarimetric radiometric sensor is sensitive to the polarization state of light. To obtain highly accurate spectral solar radiation data from the Earth-atmosphere system for the space-borne inter-calibration studies as proposed in NASA's Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission and the CLARREO Pathfinder (CPF) mission, the spectral polarization state of the reflected solar light at the top of atmosphere (TOA) must be known with sufficient accuracy. The degree of polarization (DOP) and the angle of linear polarization (AOLP) of the light at the TOA as functions of incident and viewing geometry and scene type construct the Polarization Distribution Models (PDMs) for correction of polarization-induced error of satellite data. In this work, algorithms for modeling the spectral polarization state of reflected sunlight from various types of Earth, including oceans, deserts, vegetated land surfaces and these scene types with all kinds of clouds, are developed. By comparing the model results with the PARASOL satellite data, our numerical results demonstrate that the model can provide a reliable approach for making the spectral PDMs for wavelengths between 320 and 2300 nm for satellite inter-calibration applications as proposed in the CLARREO and the CLARREO CPF missions.

Sun, Wenbo↗

A method for computing instantaneous downtrack error from TDRS Doppler residuals

A simple method has been developed which calculates the instantaneous downtrack error in an orbiting vehicle's state vector from TDRS (Tracking and Data Relay Satellite) Doppler observation residuals. The downtrack error is expressed as a delta-time correction to the timetag of the vehicle's state vector. The method requires only a few easily obtained parameters and is easy to implement. This paper details the derivation of computing a delta-time correction from TDRS Doppler observation residuals and evaluates the method's assumptions and limitations. The results presented show that typically the method computes delta-time corrections that are less than five percent off from the true timetag error for Doppler observation residuals within twenty minutes of closest approach to the TDRS.

Haas, Franklin M., Jr.↗

Reflector Surface Error Compensation in Dual-Reflector Antennas

By probing the field on a small subreflector at a minimal number of points, the main reflector surface errors can be obtained and subsequently used to design a phase-correction subreflector that can compensate for main reflector errors. The compensating phase-error profile across the subreflector can be achieved either by a surface deformation or by the use of an array of elements such as patch antennas that can cause a phase shift between the incoming and outgoing fields. The second option is of primary interest here, but the methodology can be applied to either case. The patch array is most easily implemented on a planar surface. Therefore, the example of a flat subreflector and a parabolic main reflector (a Newtonian dual reflector system) is considered in this work. The subreflector is assumed to be a reflector array covered with patch elements. The phase variation on a subreflector can be detected by a small number of receiving patch elements (probes). By probing the phase change at these few selected positions on the subreflector, the phase error over the entire surface can be recovered and used to change the phase of all the patch elements covering the subreflector plane to compensate for main reflector errors. This is accomplished by using a version of sampling theorem on the circular aperture. The sampling is performed on the phase-error function on the circular aperture of the main reflector by a method developed using Zernike polynomials. This method is based upon and extended from a theory previously proposed and applied to reflector aperture integration. This sampling method provides for an exact retrieval of the coefficients of up to certain orders in the expansion of the phase function, from values on a specifically calculated set of points in radial and azimuthal directions in the polar coordinate system, on the circular reflector aperture. The corresponding points on the subreflector are then obtained and, by probing the fields at these points, a set of phase values is determined that is then transferred back to the main reflector aperture for recovering the phase function. Once this function is recovered, the corresponding phase function on the subreflector is calculated and used to compensate for main reflector surface errors. In going back and forth between sub and main reflectors, geometrical (ray) optics is employed, which even though it ignores edge diffraction and other effects, is shown to be accurate for phase recovery.

Jamnejad, Vahraz↗

Software Validation via Model Animation

This paper explores a new approach to validating software implementations that have been produced from formally-verified algorithms. Although visual inspection gives some confidence that the implementations faithfully reflect the formal models, it does not provide complete assurance that the software is correct. The proposed approach, which is based on animation of formal specifications, compares the outputs computed by the software implementations on a given suite of input values to the outputs computed by the formal models on the same inputs, and determines if they are equal up to a given tolerance. The approach is illustrated on a prototype air traffic management system that computes simple kinematic trajectories for aircraft. Proofs for the mathematical models of the system's algorithms are carried out in the Prototype Verification System (PVS). The animation tool PVSio is used to evaluate the formal models on a set of randomly generated test cases. Output values computed by PVSio are compared against output values computed by the actual software. This comparison improves the assurance that the translation from formal models to code is faithful and that, for example, floating point errors do not greatly affect correctness and safety properties.

Dutle, Aaron M.↗

Fast temporal neural learning using teacher forcing

A neural network is trained to output a time dependent target vector defined over a predetermined time interval in response to a time dependent input vector defined over the same time interval by applying corresponding elements of the error vector, or difference between the target vector and the actual neuron output vector, to the inputs of corresponding output neurons of the network as corrective feedback. This feedback decreases the error and quickens the learning process, so that a much smaller number of training cycles are required to complete the learning process. A conventional gradient descent algorithm is employed to update the neural network parameters at the end of the predetermined time interval. The foregoing process is repeated in repetitive cycles until the actual output vector corresponds to the target vector. In the preferred embodiment, as the overall error of the neural network output decreasing during successive training cycles, the portion of the error fed back to the output neurons is decreased accordingly, allowing the network to learn with greater freedom from teacher forcing as the network parameters converge to their optimum values. The invention may also be used to train a neural network with stationary training and target vectors.

Toomarian, Nikzad↗

Fast temporal neural learning using teacher forcing

A neural network is trained to output a time dependent target vector defined over a predetermined time interval in response to a time dependent input vector defined over the same time interval by applying corresponding elements of the error vector, or difference between the target vector and the actual neuron output vector, to the inputs of corresponding output neurons of the network as corrective feedback. This feedback decreases the error and quickens the learning process, so that a much smaller number of training cycles are required to complete the learning process. A conventional gradient descent algorithm is employed to update the neural network parameters at the end of the predetermined time interval. The foregoing process is repeated in repetitive cycles until the actual output vector corresponds to the target vector. In the preferred embodiment, as the overall error of the neural network output decreasing during successive training cycles, the portion of the error fed back to the output neurons is decreased accordingly, allowing the network to learn with greater freedom from teacher forcing as the network parameters converge to their optimum values. The invention may also be used to train a neural network with stationary training and target vectors.

Toomarian, Nikzad↗

Error Due to Wing Bending in Single-Camera Photogrammetric Technique

The error due to wing bending introduced into single-camera photogrammetric computations used for the determination of wing twist or control surface angular deformation is described. It is shown that the error due to wing bending when determining main wing element-induced twist is typically less than 0.05deg at the wing tip and may not warrant additional correction. It is also shown that the angular error in control surface deformation due to bending can be as large as 1deg or more if the control surface is at a large deflection angle compared to the main wing element. A correction procedure suitable for control surface measurements is presented. Simulations of the error based on typical wind tunnel measurement geometry, and results from a controlled experimental test in the test section of the National Transonic Facility (NTF) are presented to confirm the validity of the method used for correction of control surface photogrammetric deformation data. An example of a leading edge (LE) slat measurement is presented to illustrate the error due to wing bending and its correction.

Burner, Alpheus W., Jr.↗

Polar-cap and coronal-hole-associated brightenings of the Sun at millimeter wavelengths

Mapping observations of the Sun at millimeter wavelengths were made on 16 to 22 July 1984 with the 45-m telescope of the Nobeyama Radio Observatory. Seven 36-GHz (8.3-mm) maps and five 98-GHz (3.1-mm) maps were taken with half-power beam widths of 46 arc sec and 17 arc sec, respectively. Instead of the conventional rastering technique, a radial-scan method was adopted in which every scan passes through the disk center. Accordingly, the variation of the atmosphere attenuation due to changes in the weather conditions can be easily estimated and removed by using the brightness values at the disk center as calibration data. Also, the pointing errors of the telescope due to the high-speed scans can be corrected by using the solar limbs as position references. The rms residual errors in relative brightness and position after the corrections were estimated to be approx. 2% and approx. 5 arc sec respectively. To further reduce these errors, enabled us to make high-quality maps with with or approx. 1% uncertainty in brightness. Here and in the following, brightness is expressed in terms of the average brightness of the solar disk as a unit. Note that the brightness temperature of the quiet Sun is approx. 8000 K and approx. 6000 K at 36 GHz and 98 GHz, respectively.

Kosugi, T.↗

Statistical corrections to numerical predictions. IV

The National Meteorological Center Barotropic-Mesh Model has been used to test a statistical correction procedure, designated as M-II, that was developed in Schemm et al. (1981). In the present application, statistical corrections at 12 h resulted in significant reductions of the mean-square errors of both vorticity and the Laplacian of thickness. Predictions to 48 h demonstrated the feasibility of applying corrections at every 12 h in extended forecasts. In addition to these improvements, however, the statistical corrections resulted in a shift of error from smaller to larger-scale motions, improving the smallest scales dramatically but deteriorating the largest scales. This effect is shown to be a consequence of randomization of the residual errors by the regression equations and can be corrected by spatially high-pass filtering the field of corrections before they are applied.

Schemm, Jae-Kyung↗

An Improved Ionospheric Correction Method for Wide-Area Augmentation Systems

A powerful approach for generating ionospheric corrections in wide area differential GPS applications has been developed, that can be applied to the Federal Aviation Administration's Wide Area Augmentation System (WAAS). This approach has been used to support ionospheric calibration for NASA's Deep Space Network and will be supporting real-time operations for global ionospheric specification and, possibly, single-frequency satellite altimeter calibration. It is a real-time, grid-based technique relying on a computationally efficient Kalman-type filter to produce accurate, smoothly varying ionospheric correction maps over the coverage area. Formal error maps are also computed, providing vertical delay errors over the WAAS grid, which are useful in integrity monitoring. This solution to the ionospheric correction problem is self-calibrating, since GPS transmitter inter-frequency biases are obtained as a by-product of the mapping procedure. This contrasts with other techniques in which bias values must be provided from some additional source.

Wide-Area↗

Toward Online Measurement of Decision State

In traditional perceptual decision-making experiments, two pieces of data are collected on each trial: response time and accuracy. But how confident were participants and how did their decision state evolve over time? We asked participants to provide a continuous readout of their decision state by moving a cursor along a sliding scale between a 100% certain left response and a 100% certain right response. Subjects did not terminate the trials; rather, trials were timed out at random and subjects were scored based on the cursor position at that time. Higher rewards for correct responses and higher penalties for errors were associated with extreme responses so that the response with the highest expected value was that which accurately reflected the participant's odds of being correct. This procedure encourages participants to expose the time-course of their evolving decision state. Evidence on how well they can do this will be presented.

Lachter, Joel↗

Estimation of 3-D Cloud Effects on TOMS Satellite Retrieval of Surface UV Irradiance

To improve surface UV irradiance retrieval from the Total Ozone Mapping Spectrometer (TOMS) we simulate errors of the TOMS cloud correction algorithm for summertime broken cloud conditions. Cloud scenes (50 km by 50 km) are modeled by a normal random (Gaussian) field with a fixed lower boundary and conservative scattering. The model relates stochastic field characteristics with the cloud amount, mean cloud diameter and aspect ratio. Clouds are embedded into Rayleigh atmosphere with standard ozone profile. Radiative transfer calculations of the radiance at the top of the atmosphere and irradiance at the surface were performed using 3-D Monte Carlo (MC) code. The results are averaged over the satellite field of view on the surface (50 km by 50 km) and compared with TOMS predicted surface irradiance for the same scene reflectance. The TOMS algorithm assumes horizontally homogeneous Cl-type cloud between 3 km and 5.5 km. The effective optical depth is determined by fitting observed (MC) radiance at 380 nm. Having the same radiance at the satellite the homogeneous and broken cloud models predict different average irradiances at the surface. This is due to the differences in Bidirectional Reflection Distribution Function (BRDF) for homogeneous and broken cloud scenes with the same hemispherical albedo. For typical TOMS observational geometry at mid-latitudes the simulated single pixels errors may be as large as +/- 20%. Qualitatively these errors are due to the dominance of the non-horizontal cloud surfaces, which are not accounted for in the homogeneous cloud model. However, due to high variability of the real cloud shapes and types it is unclear how these single pixel errors would affect TOMS time-integrated UV exposure over extended periods (weeks to months) for different regions.

Krotkov, Nickolay A.↗

Revised depolarization corrections for atmospheric extinction

Possible sources of errors in depolarization data are analyzed with special reference to the rotational Raman contribution to the optical depth. It is shown that the depolarization data now available are so accurate that their uncertainty affects the calculated Rayleigh optical depth by less than 1%, and consequently, the anomalously low extinctions occasionally reported must be due to systematic errors of measurement rather than errors in the Rayleigh optical depths.

Young, A. T.↗

Use of Remotely-Sensed Rainfall Data in Global Modeling and Data Assimilation

Precipitation observations derived from microwave sensors available from the Tropical Rainfall Measuring Mission (TRMM) and the proposed Global Precipitation Mission (GPM) can provide crucial information needed for improving global modeling, data assimilation, and numerical weather prediction. New methodologies are being developed at NASA to make effective use of this new data type in these applications. Currently, global analyses contain significant errors in primary hydrological fields such as precipitation and evaporation, especially in the tropics. We show that assimilating 6-h averaged TRMM rainfall retrievals improves not only the hydrological cycle but also key climate parameters such as clouds, radiation, and the upper tropospheric moisture in the analysis produced by the Goddard Earth Observing System (GEOS) Data Assimilation System. The improved analysis also leads to improved short-range forecasts in the tropics. The above results were obtained using a variational assimilation procedure that uses rainfall observations to derive moisture and temperature tendency corrections every 6 hours to compensate for errors arising from imperfect initial conditions and deficiencies in the model physics. We will describe a developmental path towards using space-borne rainfall data to empirically estimate and correct for state-dependent systematic errors in parameterized model physics. The study provides a demonstration of the potential of using remote-sensed rainfall data from microwave instruments to improve the 4-dimensional global datasets for climate analysis and numerical weather prediction.

Hou, Arthur↗

Toward Online Measurement of Decision State

In traditional perceptual decision-making experiments, two pieces of data recollected on each trial: response time and accuracy. But how confident were participants and how did their decision state evolve over time? We asked participants to provide a continuous readout of their decision state by moving a cursor along a sliding scale between a 100% certain left response and a 100% certain right response. Subjects did not terminate the trials; rather, trials were timed out at random and subjects were scored based on the cursor position at the time. Higher rewards for correct responses and higher penalties for errors were associated with extreme responses so that the response with the highest ex[pected value was that which accurately reflected the participant's odds of being correct. This procedure encourages participants to expose the time-course of their evolving decision state. Evidence on how well they can do this will be presented.

Lachter, Joel↗

True covariance simulation of the EUVE (extreme ultra violet explorer) update filter

This paper presents a covariance analysis of the performance and sensitivity of the attitude determination Extended Kalman Filter (EKF) used by the onboard computer (OBC) of the Extreme Ultra Violet Explorer (EUVE) spacecraft. The linearized dynamics and measurement equations of the error states are used in formulating the 'truth model' describing the order of the systems involved. The 'design model' used by the OBC EKF is then obtained by reducing the order of the truth model. The covariance matrix of the EKF which uses the reduced order model is not the correct covariance of the EKF estimation error. A 'true covariance analysis' has to be carried out in order to evaluate the correct accuracy of the OBC generated estimates. The results of such analysis are presented which indicate both the performance and the sensitivity of the OBC EKF.

Bar-Itzhack, I. Y.↗

True covariance simulation of the EUVE update filter

A covariance analysis of the performance and sensitivity of the attitude determination Extended Kalman Filter (EKF) used by the On Board Computer (OBC) of the Extreme Ultra Violet Explorer (EUVE) spacecraft is presented. The linearized dynamics and measurement equations of the error states are derived which constitute the truth model describing the real behavior of the systems involved. The design model used by the OBC EKF is then obtained by reducing the order of the truth model. The covariance matrix of the EKF which uses the reduced order model is not the correct covariance of the EKF estimation error. A true covariance analysis has to be carried out in order to evaluate the correct accuracy of the OBC generated estimates. The results of such analysis are presented which indicate both the performance and the sensitivity of the OBC EKF.

Bar-Itzhack, Itzhack Y.↗