Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Tailored Excitation for Multivariable Stability-Margin Measurement Applied to the X-31A Nonlinear Simulation

Safety and productivity of the initial flight test phase of a new vehicle have been enhanced by developing the ability to measure the stability margins of the combined control system and vehicle in flight. One shortcoming of performing this analysis is the long duration of the excitation signal required to provide results over a wide frequency range. For flight regimes such as high angle of attack or hypersonic flight, the ability to maintain flight condition for this time duration is difficult. Significantly reducing the required duration of the excitation input is possible by tailoring the input to excite only the frequency range where the lowest stability margin is expected. For a multiple-input/multiple-output system, the inputs can be simultaneously applied to the control effectors by creating each excitation input with a unique set of frequency components. Chirp-Z transformation algorithms can be used to match the analysis of the results to the specific frequencies used in the excitation input. This report discusses the application of a tailored excitation input to a high-fidelity X-31A linear model and nonlinear simulation. Depending on the frequency range, the results indicate the potential to significantly reduce the time required for stability measurement.

Bosworth, John T.↗
NASA NTRS2000

Exploratory Studies in Generalized Predictive Control for Active Aeroelastic Control of Tiltrotor Aircraft

The Aeroelasticity Branch at NASA Langley Research Center has a long and substantive history of tiltrotor aeroelastic research. That research has included a broad range of experimental investigations in the Langley Transonic Dynamics Tunnel (TDT) using a variety of scale models and the development of essential analyses. Since 1994, the tiltrotor research program has been using a 1/5-scale, semispan aeroelastic model of the V-22 designed and built by Bell Helicopter Textron Inc. (BHTI) in 1981. That model has been refurbished to form a tiltrotor research testbed called the Wing and Rotor Aeroelastic Test System (WRATS) for use in the TDT. In collaboration with BHTI, studies under the current tiltrotor research program are focused on aeroelastic technology areas having the potential for enhancing the commercial and military viability of tiltrotor aircraft. Among the areas being addressed, considerable emphasis is being directed to the evaluation of modern adaptive multi-input multi- output (MIMO) control techniques for active stability augmentation and vibration control of tiltrotor aircraft. As part of this investigation, a predictive control technique known as Generalized Predictive Control (GPC) is being studied to assess its potential for actively controlling the swashplate of tiltrotor aircraft to enhance aeroelastic stability in both helicopter and airplane modes of flight. This paper summarizes the exploratory numerical and experimental studies that were conducted as part of that investigation.

Kvaternik, Raymond G.↗
DOE OSTI2025

Self-Aligned Fluorinated-Organic Ligand for Boosting the Performance of Perovskite Solar Cells

Surface passivation is evident to be one of the most efficient approaches to achieve high efficiency with superior stability of perovskite solar cells (PeSCs). However, most previous approaches to surface passivation involve adding an additional coating process either before or after perovskite film fabrication, thereby introducing an extra processing step and significantly increasing production costs. Here, a simple yet novel one-step interfacial passivation approach was implemented by utilizing the self-aligning properties of fluorinated organic ligands (F4TmI) within a perovskite precursor solution. The inherent propensity of the ligand to spontaneously anchor onto the surface of perovskite guides the crystallization process of perovskites, thus largely enhancing the device performance and humidity stability. The optimized F4TmI-based devices achieved an efficiency of 21.1%, surpassing that of the control (19.8%). Furthermore, the device stability significantly improved after the incorporation of F4TmI, maintaining 78.9 and 95.1% of its initial efficiency after aging at 60 °C and 60% relative humidity, respectively, for 330 h.

14 SOLAR ENERGY↗
DOE OSTI2023

Recent advances of two-dimensional material additives in hybrid perovskite solar cells

Perovskite solar cells (PSCs) have become one of the state-of-the-art photovoltaic technologies due to their facile solution-based fabrication processes combined with extremely high photovoltaic performance originating from excellent optoelectronic properties such as strong light absorption, high charge mobility, long free charge carrier diffusion length, and tunable direct bandgap. However, the poor intrinsic stability of hybrid perovskites under environmental stresses including light, heat, and moisture, which is often associated with high defect density in the perovskite, has limited the large-scale commercialization and deployment of PSCs. The use of process additives, which can be included in various subcomponent layers in the PSC, has been identified as one of the effective approaches that can address these issues and improve the photovoltaic performance. Among various additives that have been explored, two-dimensional (2D) materials have emerged recently due to their unique structures and properties that can enhance the photovoltaic performance and device stability by improving perovskite crystallization, defect passivation, and charge transport. In this work, we provide a review of the recent progresses in 2D material additives for improving the PSC performance based on key representative 2D material systems, including graphene and its derivatives, transitional metal dichalcogenides, and black phosphorous, providing a useful guideline for further exploiting unique nanomaterial additives for more efficient and stable PSCs in the near future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Long-Life, Ultrahigh-Nickel Cathodes with Excellent Air Storage Stability for High-Energy Density Lithium-Based Batteries

With increased energy density and cost advantage, ultrahigh-nickel layered oxides (LiNi x M 1-x O 2 , x = 0.9 - 1.0) are becoming front-runner as cathodes for next-generation lithium-based batteries, yet their commercialization is blocked both by severe capacity fade and exponentially aggravated air degradation. Thus, it is imperative to find effective solutions to address these issues simultaneously. Here, a significant enhancement in both the cycling and air storage stability of the ultrahigh-Ni cathode LiNi 0.94 Co 0.06 O 2 is achieved via a distinctive phosphoric acid treatment strategy. The modified cathode displays remarkably improved capacity retention (from 36 % to 80 % after 1,000 cycles) and rate capability (from 0 to 105 mA h g -1 at 30C rate) in pouch cells. Impressively, the modified cathode, after air storage for 450 days, maintains the morphology and 92% of the initial capacity of the fresh sample with excellent cyclability. Comprehensive interphase and structural analyses reveal that the enhanced electrochemical performance is due to a highly stabilized electrode/electrolyte interphase that suppresses electrode corrosion and lattice reconstruction. The excellent air stability results from an adsorption-buffering effect enabled by phosphoric acid to air attack. Finally, the study demonstrates an engineering pathway to improve the cycling and air stability, facilitating the practical viability of high-capacity, affordable, ultrahigh-Ni cathodes in lithium-based batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

An Efficient Bifunctional Air Electrode for Reversible Protonic Ceramic Electrochemical Cells

One of the main bottlenecks that limits the performance of reversible protonic ceramic electrochemical cells (R-PCECs) is the sluggish kinetics of the oxygen reduction and evolution reactions (ORR and OER). Here, the significantly enhanced ORR and OER kinetics and stability of a conventional La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) air electrode by an efficient catalyst coating of barium cobaltite (BCO) is reported. The polarization resistance of a BCO-coated LSCF air electrode at 600 oC is 0.16 Ω cm 2 , about 30% of that of the bare LSCF air electrode under the same conditions. Further, a R-PCEC with the BCO-coated LSCF air electrode shows exceptional performance in both fuel cell (maximum power density of 1.16 W cm -2 at 600 ºC) and electrolysis (current density of 1.80 A cm -2 at 600 ºC at 1.3 V) modes. Finally, the performance enhancement is attributed mainly to the facilitated rate of oxygen surface exchange.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Effect of the Molecular Structure of Surface Vanadia on Activity and Regenerability of VO $x$ /In 2 O 3 Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane

Our recent work has reported that higher propylene selectivity and improved stability can be achieved by combining redox-active VO $x$ and basic In 2 O 3 for CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP). In the present work, we continued to explore the stability and regenerability of V/In catalysts. In particular, our interest lies in identifying the effect of mono- and polyvanadate on catalytic performance and regenerability. A V/In catalyst with an increased proportion of monovanadate was prepared using the Schlenk line under moisture-free conditions (V/In–S), while the fully polymerized vanadate catalyst was prepared through a regular impregnation (V/In) for comparison. The Schlenk-line-prepared catalyst, namely, V/In–S, not only exhibits a 17–30% enhanced propylene yield at high temperatures (500–540 °C) over V/In but also presents improved stability and regenerability with nearly 88% activity recovered after regeneration in O 2 . Detailed characterizations have been performed to reveal the catalyst structure–performance relationship, including chemisorption (NH 3 /CO 2 -temperature-programmed desorption, NH 3 /CO 2 -TPD), H 2 -temperature-programmed reduction (H 2 -TPR), and spectroscopic studies [Raman spectroscopy, UV–vis diffuse reflectance spectroscopy (UV–vis DRS), near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), and high-sensitivity low-energy ion scattering (HS-LEIS)]. Characterization results demonstrate that compared with polyvanadates, monovanadates lead to strengthened interaction with In 2 O 3 and a more stabilized V/In surface and subsurface, as well as improved redox properties of VO $x$ . These advantages give rise to the observed enhancement in activity, stability, and regenerability. In conclusion, these findings advance the understanding of the relationship between the activity/stability and the molecular structure of surface oxide species (vanadia) and the interplay between acid–base interactions and redox properties of mixed metal-oxide catalysts for efficient CO 2 -ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoparticle Assembly Induced Ligand Interactions for Enhanced Electrocatalytic CO 2 Conversion

The microenvironment in which the catalysts are situated is as important as the active sites in determining the overall catalytic performance. Recently, it has been found that nanoparticle (NP) surface ligands can actively participate in creating a favorable catalytic microenvironment, as part of the nanoparticle/ordered-ligand interlayer (NOLI), for selective CO 2 conversion. However, much of the ligand–ligand interactions presumed essential to the formation of such a catalytic interlayer remains to be understood. In this study, by varying the initial size of NPs and utilizing spectroscopic and electrochemical techniques, we show that the assembly of NPs leads to the necessary ligand interactions for the NOLI formation. The large surface curvature of small NPs promotes strong noncovalent interactions between ligands of adjacent NPs through ligand interdigitation. This ensures their collective behavior in electrochemical conditions and gives rise to the structurally ordered ligand layer of the NOLI. Thus, the use of smaller NPs was shown to result in a greater catalytically effective NOLI area associated with desolvated cations and electrostatic stabilization of intermediates, leading to the enhancement of intrinsic CO 2 -to-CO turnover. Our findings highlight the potential use of tailored microenvironments for NP catalysis by controlling its surface ligand interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Entropy-Stabilized Multication Fluorides as a Conversion-Type Cathode for Li-Ion Batteries–Impact of Element Selection

Metal fluorides (e.g., FeF 2 and FeF 3 ) have received attention as conversion-type cathode materials for Li-ion batteries due to their higher theoretical capacity compared to that of common intercalation materials. However, their practical use has been hindered by low round-trip efficiency, voltage hysteresis, and capacity fading. Cation substitution has been proposed to address these challenges, and recent advancements in battery performance involve the introduction of entropy stabilization in an attempt to facilitate reversible conversion reactions by increasing configurational entropy. Building on this concept, high entropy fluorides with five cations were synthesized by using a simple mechanochemical route. In order to examine the impact of element selection, Co 0.2 Cu 0.2 Ni 0.2 Zn 0.2 Fe 0.2 F 2 (HEF-Fe) was compared with Co 0.2 Cu 0.2 Ni 0.2 Zn 0.2 Mg 0.2 F 2 (HEF-Mg), replacing electrochemically inactive Mg with Fe as an active participant in the conversion reaction. Combining electrochemical measurements with first-principles calculations, high-resolution electron microscopy, and synchrotron X-ray analysis, HEFs’ battery performances and conversion reaction mechanisms were investigated in detail. The results highlighted that replacement of Mg with Fe was beneficial, with enhanced capacity, rate capability, and surface stability. In addition, it was found that HEF-Fe showed similar cycle stability without an electrochemically inactive element. In conclusion, these findings provide valuable insights for the design of high entropy multielement fluorides for improved Li-ion battery performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Aging studies on chemical vapor deposition and mechanically exfoliated molybdenum disulfide flakes heated in ambient air

The structural integrity of atomically thin two-dimensional molybdenum disulfide (MoS 2 ) is crucial for high-temperature applications, including nanoelectronics and optoelectronics. This study explores the structural stability and electrical performance, under extended thermal exposure in air, of MoS 2 flakes synthesized via chemical vapor deposition (CVD) and mechanical exfoliation. The MoS 2 flakes, both CVD-grown and mechanically exfoliated, were subjected to heating at 200 °C with a relative humidity of 60(±5)% for a prolonged period and investigated with atomic force microscopy and Raman spectroscopy. This study shows that CVD-grown flakes developed noticeable cracks after prolonged heating, whereas mechanically exfoliated flakes mostly retained their structural integrity. Also, both types of flakes showed a decrease in layer thickness and lateral size over time, with mechanically exfoliated flakes exhibiting a comparatively smaller reduction in substrate coverage area. In addition, MoS 2 -based two-terminal devices were subjected to heating at 150 °C for approximately 1100 h, and their electrical characterization revealed a steady rise in current during constant voltage (5 V) conditions. This study enhances our understanding of MoS 2 stability and provides guidance for improving the reliability of MoS 2 -based devices in high-temperature electronic applications.

2D materials↗
DOE OSTI2023

Manganese-based A-site high-entropy perovskite oxide for solar thermochemical hydrogen production

Non-stoichiometric perovskite oxides have been studied as a new family of redox oxides for solar thermochemical hydrogen (STCH) production owing to their favourable thermodynamic properties. However, conventional perovskite oxides suffer from limited phase stability and kinetic properties, and poor cyclability. Here, we report a strategy of introducing A-site multi-principal-component mixing to develop a high-entropy perovskite oxide, (La 1/6 Pr 1/6 Nd 1/6 Gd 1/6 Sr 1/6 Ba 1/6 )MnO 3 (LPNGSB_Mn), which shows desirable thermodynamic and kinetics properties as well as excellent phase stability and cycling durability. LPNGSB_Mn exhibits enhanced hydrogen production (~77.5 mmol mol oxide -1 ) compared to (La 2/3 Sr 1/3 )MnO 3 (~53.5 mmol mol oxide -1 ) in a short 1 hour redox duration and high STCH and phase stability for 50 cycles. LPNGSB_Mn possesses a moderate enthalpy of reduction (252.51–296.32 kJ (mol O) -1 ), a high entropy of reduction (126.95–168.85 J (mol O) -1 K -1 ), and fast surface oxygen exchange kinetics. All A-site cations do not show observable valence changes during the reduction and oxidation processes. In conclusion, this research preliminarily explores the use of one A-site high-entropy perovskite oxide for STCH.

08 HYDROGEN↗
DOE OSTI2024

Local lattice distortions and the structural instabilities in bcc Nb–Ta–Ti–Hf high-entropy alloys: An ab initio computational study

Local lattice distortions (LLD) and structural stability of body-centered cubic (bcc) Nb–Ta–Ti–Hf high-entropy alloys (HEAs) are studied as functions of composition employing ab initio density-functional theory calculations, with specific focus on the role of the relative concentrations of group IV (Ti and Hf) versus group V (Nb and Ta) elements. Calculated results are presented as a function of composition x in Nb x Ta 0.25 Ti (0.75-x)/2 Hf (0.75-x)/2 alloys, for elastic moduli, phonon spectral functions, LLD and structural energy differences for the bcc and competing hexagonal close-packed (hcp) and ω phases. The results highlight the important role of group V elements and LLD in stabilizing the bcc structure. They further reveal how composition x can be tuned to alter both the magnitude of the LLD and structural energy differences. Specifically, the magnitude of the structural energy differences, and elastic and dynamic stability of the bcc phase, are enhanced with increasing x, while the LLD increase in magnitude as this concentration is decreased. The results also show evidence of correlated LLD at lower values of x, reflecting local structural distortions towards the ω phase, but not hcp. The degree of ω-collapse is nevertheless partial i.e., transformation towards this phase is not observed to be complete due to the presence of Ta and Nb. At lower values of x we further find an energy landscape characterized by multiple, nearly degenerate local energy minima for different values of the LLD.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Advancing $otsdaq$ for Optimized Data Acquisition

High-energy physics (HEP) experiments demand data acquisition (DAQ) systems capable of orchestrating complex detector operations, high data throughput, and responsive, real-time feedback. Traditional systems often have steep learning curves, making onboarding difficult for new users. The Off-The-Shelf Data Acquisition $otsdaq$ framework was developed to address these issues by providing a modular and flexible interface that is easier to operate while remaining customizable enough for experimental setups. As the upcoming Mu2e experiment prepares for deployment, improving stability, usability, and performance has become increasingly critical. Our work enhances $otsdaq$ with features that streamline visualization, correct data metrics, improve debugging workflows, and stabilize the user interface.

Mohammed, Ali (ORCID:0009000860386626)↗
DOE OSTI2025

Probing the role of local tunnel variations in early-stage lithiation of α-MnO₂ nanowires via in situ TEM

Understanding lithium-ion transport in tunnel-structured manganese oxides is essential for designing high-performance lithium-ion battery electrode materials. Here, we elucidate the early-stage lithiation mechanism of potassium-stabilized α-MnO 2 nanowires using in situ transmission electron microscopy (TEM) coupled with electron energy-loss spectroscopy (EELS), high-resolution TEM (HRTEM), and geometric phase analysis (GPA). Real-time TEM imaging reveals clear volume expansion at the reaction front, while EELS analysis uncovers lithium-ion diffusion far beyond this region, where no visible expansion is observed, indicating fast, defect-assisted transport. GPA and HRTEM analyses show that localized tensile and compressive strain fields, originating from pre-existing local tunnel structural variations, persist after lithiation. The tensile-strained regions enable lithium-ion insertion with minimal lattice distortion, offering additional free volume that facilitates rapid lithium-ion accommodation ahead of the structural transformation. Our results demonstrate a local tunnel variation-mediated fast diffusion pathway that precedes bulk reaction, underscoring the critical role of local strain in enabling early-stage lithium transport. Given the structural versatility of MnO 2 and its ability to accommodate diverse atomic arrangements beyond the well-known tunnel phases (β-, γ-, δ-, λ-, R-phases), our findings highlight the importance of understanding and engineering local structural environments. This work provides fundamental insights into the interplay between defects, strain, and ion dynamics, and presents defect engineering as a promising approach to enhance both rate performance and structural stability in manganese-based cathodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Galvanic Transformation Dynamics in Heterostructured Nanoparticles

Corrosion is a significant problem for the stability of structural metals and potentially for functional nanomaterials in operating environments. When two metals with different electrochemical potentials form a junction, galvanic corrosion occurs, resulting in the sacrificial dissolution of the metal with a higher oxidation potential (lower electrode potential). In this report it is shown that bimetallic hetero-nanostructures composed of phase-segregated metals undergo galvanic corrosion in aqueous environments. Such selective etching of the sacrificial metal in heterojunction particles leads to the formation of unusual and kinetically stabilized half-spheroid particles. By using a fluid cell and in situ scanning transmission electron microscopy, a two-stage corrosion process can be observed where the Cu experiences a fractal breakdown before the Ag corrodes due to the lack of a protective oxide layer. However, when treated with a mild Ar plasma, the stability of these structures against corrosion is enhanced due to the conversion of the amorphous native oxide to a denser, thin layer of CuO on the Cu surface. Taken together, this work highlights the importance of considering the effects of galvanic corrosion on the stability of multicomponent nanoparticles, and it shows how mass transport in a nanoscale system is influenced by redox processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Redox regulation of m 6 A methyltransferase METTL3 in β-cells controls the innate immune response in type 1 diabetes

Type 1 Diabetes (T1D) is characterized by the destruction of pancreatic ß-cells. Several observations have renewed the interest in ß-cell RNA sensors and editors. Here, in this study, we report that N 6 -methyladenosine (m 6 A) is an adaptive ß-cell safeguard mechanism that controls the amplitude and duration of the antiviral innate immune response at T1D onset. m 6 A writer methyltransferase 3 (METTL3) levels increase drastically in ß-cells at T1D onset but rapidly decline with disease progression. m 6 A-sequencing revealed the m 6 A hypermethylation of several key innate immune mediators including OAS1, OAS2, OAS3, and ADAR1 in human islets and EndoC-ßH1 cells at T1D onset. METTL3 silencing enhanced OAS levels by increasing its mRNA stability. Consistently, in vivo gene therapy, to prolong Mettl3 overexpression specifically in ß-cells, delayed diabetes progression in the non-obese diabetic (NOD) mouse model of T1D. Mechanistically, the accumulation of reactive oxygen species blocked upregulation of METTL3 in response to cytokines, while physiological levels of nitric oxide enhanced its expression. Furthermore, for the first time to our knowledge, we report that the cysteines in position C276 and C326 in the zinc finger domains of the METTL3 protein are sensitive to S-nitrosylation (SNO) and are significant for the METTL3-mediated regulation of OAS mRNA stability in human ß-cells. Collectively, we report that m 6 A regulates ß-cells to control the innate immune response during the onset of T1D in humans.

2'-5'-oligoadenylate synthetase↗