Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Direct Observation of Phase Change Accommodating Hydrogen Uptake in Bimetallic Nanoparticles

Hydrogen holds great promise as a cleaner alternative to fossil fuels, but its efficient and affordable storage remains a significant challenge. Bimetallic systems, such as Pd and Ni, present a promising option for storing hydrogen. In this study, using the combination of different cutting-edge X-ray and electron techniques, we observed the transformations of Pd–Ni nanoparticles, which initially consist of a NiO-rich shell surrounding a Pd-rich core but undergo a major transformation when they interact with hydrogen. During hydrogen exposure, the Pd core breaks into smaller pockets, dramatically increasing its surface area and enhancing the hydrogen storage capacity, especially in nanoparticles with lower Pd content. The findings provide a deep understanding of the morphological changes at the atomic level during hydrogen storage and contribute to designing cost-effective hydrogen storage using multimetallic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reduction of blob-filament radial propagation by parallel variation of flows: Analysis of a gyrokinetic simulation

Data from the XGC1 gyrokinetic simulation is analyzed to understand the three-dimensional spatial structure and the radial propagation of blob-filaments generated by quasisteady turbulence in the tokamak edge pedestal and scrape-off layer plasma. Spontaneous toroidal flows vary in the poloidal direction and shear the filaments within a flux surface resulting in a structure that varies in the parallel direction. Here, this parallel structure allows the curvature and grad-B induced polarization charge density to be shorted out via parallel electron motion. As a result, it is found that the blob-filament radial velocity is significantly reduced from estimates which neglect parallel electron kinetics, broadly consistent with experimental observations. Conditions for when this charge shorting effect tends to dominate blob dynamics are derived and compared with the simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Rotational self-alignment of graphene seeds for nanoribbon synthesis on Ge(001) via chemical vapor deposition

The chemical vapor deposition of CH 4 on Ge(001) results in the anisotropic synthesis of graphene nanoribbons that are aligned to Ge$\langle$110$\rangle$ and have faceted armchair edges, sub-10 nm widths, and lengths greater than 100 nm. The utilization of small graphene seeds to initiate nanoribbon synthesis provides control over the nanoribbon placement and orientation. However, in order to exclusively grow nanoribbons and suppress the concomitant growth of lower aspect ratio crystals, it is imperative to control the crystallographic orientation of the seeds with respect to the Ge lattice. Here, we demonstrate that when seeds are less than 18 nm in diameter, they are able to rotate upon annealing at 910 °C prior to nanoribbon synthesis. The effect of this rotation on the resulting nanoribbons’ orientation is characterized as a function of the diameter and initial crystallographic orientation of the seeds. The seeds preferentially rotate to an orientation in which an armchair direction of their lattice is parallel to Ge$\langle$110$\rangle$—subsequently maximizing the anisotropy in growth kinetics. By exploiting this seed rotation phenomenon, we demonstrate the fabrication of seamless nanoribbon meshes and gain understanding that will affect future efforts to create arrays of unidirectionally aligned nanoribbons.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Powers of magnetic graph matrix: Fourier spectrum, walk compression, and applications

Magnetic graphs, originally developed to model quantum systems under magnetic fields, have recently emerged as a powerful framework for analyzing complex directed networks. Existing research has primarily used the spectral properties of the magnetic graph matrix to study global and stationary network features. However, their capacity to model local, nonequilibrium behaviors, often described by matrix powers, remains largely unexplored. We present a combinatorial interpretation of the magnetic graph matrix powers through directed walk profiles—counts of graph walks indexed by the number of edge reversals. Crucially, we establish that walk profiles correspond to a Fourier transform of magnetic matrix powers. The connection allows exact reconstruction of walk profiles from magnetic matrix powers at multiple discrete potentials, and more importantly, an even smaller number of potentials often suffices for accurate approximate reconstruction in real networks. This shows the empirical compressibility of the information captured by the magnetic matrix. This fresh perspective suggests further applications; for example, we illustrate how powers of the magnetic matrix can identify frustrated directed cycles (e.g., feedforward loops) and can be effectively employed for link prediction by encoding local structural details in directed graphs.

complex networks↗
DOE OSTI2021

Integrated ELM and divertor power flux control using RMPs with low input torque in EAST in support of the ITER research plan

Experiments have been carried out at the EAST tokamak to study ITER-relevant scenario integration issues, related to edge localized mode (ELM) control in H-mode plasmas by the application of three-dimensional (3D) resonant magnetic perturbations (RMPs), which have a large impact on the execution of the ITER research plan. The EAST experiments have successfully demonstrated ELM suppression at normalized torque inputs similar to ITER. The application of RMP fields with high toroidal mode number (n = 4) reduces the impact of ELM control on energy and particle confinement compared to those use lower n (n = 1, 2) RMPs. Injection of successive pellets is found to be effective in increasing the plasma density in ELM-suppressed H-modes and reducing the divertor power without triggering large ELMs at EAST. Access to high recycling and radiative divertor conditions while maintaining ELM suppression has been demonstrated in EAST by the use of gas fuelling and neon impurity seeding. Both approaches have been found to be effective in reducing power fluxes to the divertor strike points in near-separatrix lobes for both n = 2 and n = 4 RMPs. Furthermore, reduction of power fluxes in off-separatrix lobes is only effective for n = 4 RMP application, which is consistent with magnetic topology modelling (including plasma response) results showing a shallow penetration into the confined plasma region of field lines connected to these lobes compared to n = 2. The EAST results support the use of high n 3D fields for ELM suppression in ITER high Q DT scenarios since they provide optimum integration features regarding energy and particle confinement, pellet fuelling, radiative divertor operation while eliminating ELM transient power loads and being compatible with low torque input.

pellet fuelling↗
DOE OSTI2022

Bicep/Keck XV: The Bicep3 Cosmic Microwave Background Polarimeter and the First Three-year Data Set

Abstract We report on the design and performance of the B icep3 instrument and its first three-year data set collected from 2016 to 2018. B icep3 is a 52 cm aperture refracting telescope designed to observe the polarization of the cosmic microwave background (CMB) on degree angular scales at 95 GHz. It started science observation at the South Pole in 2016 with 2400 antenna-coupled transition-edge sensor bolometers. The receiver first demonstrated new technologies such as large-diameter alumina optics, Zotefoam infrared filters, and flux-activated SQUIDs, allowing ∼10× higher optical throughput compared to the Keck design. B icep3 achieved instrument noise equivalent temperatures of 9.2, 6.8, and 7.1 μ K CMB s and reached Stokes Q and U map depths of 5.9, 4.4, and 4.4 μ K arcmin in 2016, 2017, and 2018, respectively. The combined three-year data set achieved a polarization map depth of 2.8 μ K arcmin over an effective area of 585 square degrees, which is the deepest CMB polarization map made to date at 95 GHz.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Investigation of magnetic fluctuations in L-H and H-L transition dynamics on DIII-D

The dynamics of the L-H transition is not fully understood, with many parameters changing the threshold power to enter H-mode and the self-regulation between zonal flows and turbulence in the plasma edge. This paper is primarily a presentation of experimental results for DIII-D L-H and H-L transitions and speculation on the observations made. Power threshold analysis and measurements of pedestal temperatures for these transitions are presented. A comparison is made between an L-H transition and H-L transition of comparable Psep exhibiting oscillatory behaviour, showing symmetry between forward and backward transition dynamics. This paper shows the first observations of magnetic fluctuations during L-H and H-L transitions on DIII-D, and shows that L-H and H-L transitions have similar magnetic fluctuation dynamics. Information geometry analysis has been performed on measurements of plasma density fluctuations, perpendicular plasma velocity fluctuations, and magnetic field fluctuations to investigate the self-regulation and evolution of these variables during the transitions. Perpendicular flow evolution is shown to dominate the transition dynamics in both directions, but self-regulation behaviour is observed between all three variables. A strong correlation between magnetic fluctuation information rate and density fluctuation information rate for these two shots shows the strong influence of magnetic behaviour on both the L-H and H-L transition, and that these transition dynamics necessarily include electromagnetic effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Isotropic parallel antiferromagnetism in the magnetic field induced charge-ordered state of $\mathrm{Sm Ru_4 P_{12}}$ caused by $p - f$ hybridization

Nature of the field-induced charge-ordered phase (phase II) of SmRu 4 P 12 has been investigated by resonant x-ray diffraction (RXD) and polarized neutron diffraction (PND), focusing on the relationship between the atomic displacements and the antiferromagnetic (AFM) moments of Sm. From the analysis of the interference between the nonresonant Thomson scattering and the resonant magnetic scattering, combined with the spectral function obtained from x-ray magnetic circular dichroism, it is shown that the AFM moment of Sm prefers to be parallel to the field (m AF ∥ H), giving rise to large and small moment sites around which the P 12 and Ru cage contract and expand, respectively. This is associated with the formation of the staggered ordering of the Γ 7 -like and Γ 8 -like crystal-field states, providing a strong piece of evidence for the charge order. PND was also performed to obtain complementary and unambiguous conclusion. In addition, isotropic and continuous nature of phase II is demonstrated by the field-direction invariance of the interference spectrum in RXD. Finally, crucial role of the p-f hybridization is shown by resonant soft x-ray diffraction at the P K edge (1s↔3p), where we detected a resonance due to the spin polarized 3p orbitals reflecting the AFM order of Sm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Spatial-Temporal Recurrent Graph Neural Networks for Fault Diagnostics in Power Distribution Systems

Fault diagnostics are extremely important to decide proper actions toward fault isolation and system restoration. The growing integration of inverter-based distributed energy resources imposes strong influences on fault detection using traditional overcurrent relays. This paper utilizes emerging graph learning techniques to build new temporal recurrent graph neural network models for fault diagnostics. The temporal recurrent graph neural network structures can extract the spatial-temporal features from data of voltage measurement units installed at the critical buses. From these features, fault event detection, fault type/phase classification, and fault location are performed. Compared with previous works, the proposed temporal recurrent graph neural networks provide a better generalization for fault diagnostics. Moreover, the proposed scheme retrieves the voltage signals instead of current signals so that there is no need to install relays at all lines of the distribution system. Therefore, the proposed scheme is generalizable and not limited by the number of relays installed. The effectiveness of the proposed method is comprehensively evaluated on the Potsdam microgrid and IEEE 123-node system in comparison with other neural network structures.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Conceptual design of ELM control coils for the TCABR tokamak

An upgrade of the Tokamak à Chauffage Alfvén Brésilien (TCABR) is being designed to make it capable of creating a well controlled environment where the impact of resonant magnetic perturbation (RMP) fields on edge localised modes can be addressed over a wide range of (i) plasma shapes, (ii) divertor configurations, (iii) RMP coil geometries and (iv) perturbed magnetic field spectra. To this end, a unique set of in-vessel RMP coils is being designed and, in this work, their conceptual design is presented. This unique set of coils is composed of three toroidal arrays of coils on the low field side and three toroidal arrays of coils on the high field side. Each of these six toroidal arrays is composed of 18 coils thus allowing for the creation of RMP fields with toroidal mode numbers n ≤ 9 and with increased control of the poloidal mode number spectrum. To study dynamical effects of RMP fields of different toroidal mode numbers, all rotating simultaneously with different velocities, each of the 108 RMP coils will be powered independently by power supplies that can provide voltages of up to 4 kV and electric currents of up to 2 kA, with frequencies varying continuously from 0Hz up to 10kHz. A set of physical criteria were used to determine the optimal coil geometry and their respective number of turns to reduce the coil currents and voltages during operation with alternate current. Further, the conceptual design was carried out using both the vacuum approach (no plasma response) and the single-fluid response approach, which accounts for the response of a linear, single-fluid, visco-resistive plasma calculated using the M3D-C 1 code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Molecular Mechanisms of Sorbed Ion Effects during Boehmite Particle Aggregation

Classical theories of particle aggregation, such as Derjaguin–Landau–Verwey–Overbeek (DLVO), do not explain recent observations of ion-specific effects or the complex concentration dependence for aggregation. Thus, here, we probe the molecular mechanisms by which selected alkali nitrate ions (Na + , K + , and NO 3 –) influence aggregation of the mineral boehmite (γ-AlOOH) nanoparticles. Nanoparticle aggregation was analyzed using classical molecular dynamics (CMD) simulations coupled with the metadynamics rare event approach for stoichiometric surface terminations of two boehmite crystal faces. Calculated free energy landscapes reveal how electrolyte ions alter aggregation on different crystal faces relative to pure water. Consistent with experimental observations, we find that adding an electrolyte significantly reduces the energy barrier for particle aggregation (~3–4×). However, in this work, we show this is due to the ions disrupting interstitial water networks, and that aggregation between stoichiometric (010) basal–basal surfaces is more favorable than between (001) edge–edge surfaces (~5–6×) due to the higher interfacial water densities on edge surfaces. The interfacial distances in the interlayer between aggregated particles with electrolytes (~5–10 Å) are larger than those in pure water (a few Ångströms). Together, aggregation/disaggregation in salt solutions is predicted to be more reversible due to these lower energy barriers, but there is uncertainty on the magnitudes of the energies that lead to aggregation at the molecular scale. By analyzing the peak water densities of the first monolayer of interstitial water as a proxy for solvent ordering, we find that the extent of solvent ordering likely determines the structures of aggregated states as well as the energy barriers to move between them. Further, the results suggest a path for developing a molecular-level basis to predict the synergies between ions and crystal faces that facilitate aggregation under given solution conditions. Such fundamental understanding could be applied extensively to the aggregation and precipitation utilization in the biological, pharmaceutical, materials design, environmental remediation, and geological regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Interplay of structural fluctuations and charge carrier dynamics is key for high performance of hybrid lead halide perovskites

The ability of methylammonium lead triiodide (MAPbI 3 ) to achieve photoelectric conversion efficiency that is on par with crystalline silicon has led to a surge of interest in perovskite photovoltaics. However, an in-depth understanding of how the ubiquitous coupling between the fast rovibrational movements of the organic cations and the phonon vibrations of the inorganic framework affects the relaxation and recombination of hot carriers remains largely elusive. Access to such knowledge is critical to guide design and increase efficiency of new classes of perovskite solar cells. In this report, we report a time-domain ab initio investigation of temperature dependent excited state dynamics in MAPbI 3 , with particular emphasis on nuclear anharmonic effects. The observed strong anharmonicity is attributed to softness of the material and unusual dynamical coupling between the organic and inorganic components. At an elevated temperature, the hydrogen bonding between MA and iodines is weakened, enhancing rotation of MA cations, which become more dynamically disordered. As a result, thermal vibrations of the inorganic Pb–I sublattice are suppressed, and the lattice anharmonicity is decreased. Thermal fluctuations of the electronic energy levels are found to follow the trend of anharmonic motions of Pb and I atoms, with holes relaxing faster to the band edges than electrons, due to higher density of the hole states. While elevated temperature accelerates intraband carrier cooling, it slows nonradiative carrier recombination. The latter result is important for performance, since solar cells and other devices heat up during operation. The reported signatures of coupled structural dynamics of the organic cations and inorganic framework unravel the interplay between anomalous structural fluctuations and charge carrier dynamics, which is of particular importance for fundamental understanding of the structure–property relationships in hybrid metal halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Industrial deposition of wavelength-shifting films for liquid argon photon detection systems

The Deep Underground Neutrino Experiment (DUNE) Phase-II Far Detector is considering an approximately 2000 m 2 photon detection system to achieve a target mean light yield of 180 PE/MeV. Meeting this requirement demands scalable, cost-effective, and high-quality wavelength-shifter (WLS) coatings capable of converting 127 nm liquid-argon scintillation light into visible photons with controlled and reproducible optical performance. We report on the successful realization of an industrial physical vapor deposition (PVD) process forp-terphenyl (pTP) coatings, adapted from vacuum deposition techniques developed for OLED display manufacturing, to produce uniform WLS layers on large-area inorganic substrates, a task traditionally challenged by adhesion and uniformity issues at organic-inorganic interfaces. Surface characterization by profilometry and spectroscopic measurements demonstrates edge-region thickness variation below 10% and emission spectra consistent with high-quality pTP reference samples. The industrial process demonstrates reproducibility, scalability, and significantly reduced production time compared to laboratory-based methods, while maintaining optical characteristics consistent with established pTP reference samples. These results establish a viable pathway for mass production of high-performance pTP coatings for DUNE FD3 and future neutrino experiments, from a coating manufacturing and process standpoint. Detector-level performance validation, including quantitative VUV conversion efficiency measurements at 127 nm, is identified as future work.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

A gated graph transformer for protein complex structure quality assessment and its performance in CASP15

Abstract Motivation Proteins interact to form complexes to carry out essential biological functions. Computational methods such as AlphaFold-multimer have been developed to predict the quaternary structures of protein complexes. An important yet largely unsolved challenge in protein complex structure prediction is to accurately estimate the quality of predicted protein complex structures without any knowledge of the corresponding native structures. Such estimations can then be used to select high-quality predicted complex structures to facilitate biomedical research such as protein function analysis and drug discovery. Results In this work, we introduce a new gated neighborhood-modulating graph transformer to predict the quality of 3D protein complex structures. It incorporates node and edge gates within a graph transformer framework to control information flow during graph message passing. We trained, evaluated and tested the method (called DProQA) on newly-curated protein complex datasets before the 15th Critical Assessment of Techniques for Protein Structure Prediction (CASP15) and then blindly tested it in the 2022 CASP15 experiment. The method was ranked 3rd among the single-model quality assessment methods in CASP15 in terms of the ranking loss of TM-score on 36 complex targets. The rigorous internal and external experiments demonstrate that DProQA is effective in ranking protein complex structures. Availability and implementation The source code, data, and pre-trained models are available at https://github.com/jianlin-cheng/DProQA.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Molecular-Level Exploration of the Structure-Function Relations Underlying Interfacial Charge Transfer in the Subphthalocyanine/C 60 Organic Photovoltaic System

The arrangement of organic molecules at the donor-acceptor interface in an organic photovoltaic (OPV) cell can have a strong effect on the generation of charge carriers and thereby cell performance. In this paper, we report the molecular-level exploration of the ensemble of interfacial donor-acceptor pair geometries and the charge-transfer (CT) rates to which they give rise. Our approach combines molecular-dynamics simulations, electronic structure calculations, machine learning, and rate theory. This approach is applied to the boron subphthalocyanine chloride (donor) and C 60 (acceptor) OPV system. In this work we find that the interface is dominated by a previously unreported donor-acceptor pair edge geometry, which contributes significantly to device performance in a manner that depends on the initial conditions. Quantitative relations between the morphology and CT rates are established, which can be used to advance the design of more efficient OPV devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Pressure effect on magnetism and valence in ferromagnetic superconductor Eu(Fe 0.75 Ru 0.25 ) 2 As 2

Eu(Fe 0.75 Ru 0.25 ) 2 As 2 is an intriguing system with unusual coexistence of superconductivity and ferromagnetism, providing a unique platform to study the nature of such coexistence. To establish a magnetic phase diagram, time-domain synchrotron Mössbauer experiments in 151 Eu have been performed on a single crystalline Eu(Fe 0.75 Ru 0.25 ) 2 As 2 sample under hydrostatic pressures and at low temperatures. Upon compression the magnetic ordering temperature increases sharply from 20 K at ambient pressure, reaching ~49 K at 10.1GPa. With further compression, the magnetic order is suppressed and eventually collapses. Isomer shift values from Mössbauer measurements and x-ray absorption spectroscopy data at Eu L 3 edge show that pressure drives Eu ions to a homogeneous intermediate valence state with mean valence of ~2.4 at 27.4 GPa, possibly responsible for the suppression of magnetism. Synchrotron powder x-ray diffraction experiment reveals a tetragonal to collapsed-tetragonal structural transition around 5 GPa, a lower transition pressure than in the parent compound. Furthermore, these results provide guidance to further work investigating the interplay of superconductivity and magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

WRF Modelling of Deep Convection and Hail for Wind Power Applications

Deep convection and the related occurrence of hail, intense precipitation and wind gusts represent a hazard to a range of energy infrastructure including wind turbine blades. Wind turbine blade leading edge erosion (LEE) is caused by the impact of falling hydrometeors onto rotating wind turbine blades. It is a major source of wind turbine maintenance costs and energy losses from wind farms. In the United States Southern Great Plains (SGP), where there is widespread wind energy development, deep convection and hail events are common, increasing the potential for precipitation-driven LEE. A 25-day Weather Research and Forecasting (WRF) model simulation conducted at convection-permitting resolution and using a detailed microphysics scheme is carried out for the SGP to evaluate the effectiveness in modelling the wind and precipitation conditions relevant to LEE potential. WRF output for these properties is evaluated using radar observations of precipitation (including hail) and reflectivity, in situ wind speed measurements and wind power generation. This research demonstrates some skill for the primary drivers of LEE. Wind speeds, rainfall rates and precipitation totals show good agreement with observations. Here, the occurrence of precipitation during power producing wind speeds is also shown to exhibit fidelity. Hail events frequently occur during periods when wind turbines are rotating and are especially important to LEE in the SGP. The presence of hail is modelled with a mean proportion correct of 0.77 and an odds ratio 4.55. Further research is needed to demonstrate sufficient model performance to be actionable for the wind energy industry and there is evidence for positive model bias in cloud reflectivity.

17 WIND ENERGY↗
DOE OSTI2022

Excitonic Effects in X-ray Absorption Spectra of Fluoride Salts and Their Surfaces

Given their natural abundance and thermodynamic stability, fluoride salts may appear as evolving components of electrochemical interfaces in Li-ion batteries and emergent multivalent ion cells. This is due to the practice of employing electrolytes with fluorine-containing species (salt, solvent, or additives) that electrochemically decompose and deposit on the electrodes. Operando X-ray absorption spectroscopy (XAS) can probe the electrode–electrolyte interface with a single-digit nanometer depth resolution and offers a wealth of insights into the evolution and Coulombic efficiency or degradation of prototype cells, provided that the spectra can be reliably interpreted in terms of local oxidation state, atomic coordination, and electronic structure about the excited atoms. Here we explore fluorine K-edge XAS of mono- (Li, Na, and K) and di-valent (Mg, Ca, and Zn) fluoride salts from a theoretical standpoint and discover a surprising level of detailed electronic structure information about these materials despite the relatively predictable oxidation state and ionicity of the fluoride anion and the metal cation. Utilizing a recently developed many-body approach based on the ΔSCF method, we calculate the XAS using density functional theory and experimental spectral profiles are well reproduced despite some experimental discrepancies in energy alignment within the literature, which we can correct for in our simulations. We outline a general methodology to explain shifts in the main XAS peak energies in terms of a simple exciton model and explain line-shape differences resulting from the mixing of core-excited states with metal d character (for K and Ca specifically). Given ultimate applications to evolving interfaces, some understanding of the role of surfaces and their terminations in defining new spectral features is provided to indicate the sensitivity of such measurements to changes in interfacial chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗