Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Gene Expression Changes in Peripheral Blood Mononuclear Cells of ISS Crewmembers Suggest Impacts of Spaceflight on Cell Death

In space, living organisms are exposed to numerous stress factors including microgravity and space radiation. For humans, these harmful environmental factors have been known to cause negative health impacts such as immune dysfunction. Understanding the mechanisms by which spaceflight impacts human health at the molecular level is critical not only for accurately assessing the risks associated with spaceflight, but also for developing effective countermeasures. This study is part of the Functional Immune Project, intended to determine alterations in crewmembers` immunobiology before, during, and after spaceflight. For this project, blood samples were collected from International Space Station (ISS) crewmembers at the following time points: i) at two pre-flight time points of 180 days (L180) and 45 days (L45) before launch. ii) During flight, blood was drawn at approximately the midpoint (mid-flight, MF) of the mission, and shortly before egress from the ISS (late-flight, LF). iii) Post-flight blood samples were collected within 24 hrs (R0), 30 days (R30) and 90 days (R90) after landing. For each crewmember, blood was also drawn from a matching test subject on the ground at the corresponding time point. For both the ISS crewmembers and the ground control subjects, total RNA was isolated from peripheral blood mononuclear cells (PBMC) and mRNA was analysed using next generation RNA-sequencing (NGS). Differentially expressed genes were determined by performing contrast analysis. Using the data from all of the time points from the ground control subjects as a control, a number of dysregulated genes were identified in astronauts at MF, LF and R0, including downregulations of several cell cycle related genes including CDKN1A and VEGFA at MF and LF. Pathway analysis of these differentially expressed genes indicated that, in space, pathways associated with autophagy and senescence were affected. Our analysis also indicated that the genes related to metabolisms were downregulated in the microgravity environment. Taken together, we hypothesize that PBMC in the ISS crewmembers may be starved, resulting in autophagy and delayed senescence in space. Such findings are in agreement with delayed cell death in PBMC under simulated microgravity conditions on the ground and offer an explanation for telomere lengthening that has been reported among the ISS astronauts in flight

Maria Moreno-Villanueva↗
NASA NTRSDate not supplied

Gene Expression of Peripheral Blood Mononuclear Cells of Crew Members During Long-Duration Space Missions Indicate Dysregulation of Immunological and Cell Survival Mechanisms

Lymphocytes are naturally exposed to genotoxic stresses. DNA damage occurs during the entire lymphocyte’s life span and is induced mainly by reactive oxygen species (ROS), replication fork collapse, or telomere shortening during the immune response or intense cell proliferation phases. Strong evidence for the influence of immune function on DNA repair comes from studies of SCID disease. SCID mice not only have a deficient V(D)J recombination but are also unable to repair double strand breaks, leading to increased radiation sensitivity. The leukocytes’ transcriptome of 8 ISS crew members revels a dysregulated immune function and activation of cellular survival pathways in response to space environment. We have performed PCR analysis in peripheral mononuclear cells from the same crew members. A list of 62 genes were carefully selected addressing immunological and cell survival pathways. Differentially expressed genes indicated changes in chemokine receptor activity, chemokine binding, toll-like receptors, adhesion molecules and cellular response to DNA damage.

Maria Moreno-Villanueva↗
NASA NTRS2024

Gene Expression of Peripheral Blood Mononuclear Cells of Crew Members During Long-Duration Space Missions Indicate Dysregulation of Immunological and Cell Survival Mechanisms

Lymphocytes are naturally exposed to genotoxic stresses. DNA damage occurs during the entire lymphocyte’s life span and is induced mainly by reactive oxygen species (ROS), replication fork collapse, or telomere shortening during the immune response or intense cell proliferation phases. Strong evidence for the influence of immune function on DNA repair comes from studies of SCID disease. SCID mice not only have a deficient V(D)J recombination but are also unable to repair double strand breaks, leading to increased radiation sensitivity. The leukocytes’ transcriptome of 8 ISS crew members revels a dysregulated immune function and activation of cellular survival pathways in response to space environment. We have performed PCR analysis in peripheral mononuclear cells from the same crew members. A list of 62 genes were carefully selected addressing immunological and cell survival pathways. Differentially expressed genes indicated changes in chemokine receptor activity, chemokine binding, toll-like receptors, adhesion molecules and cellular response to DNA damage.

María Moreno-Villanueva↗
DOE OSTI2013

Efficient Oxygen Evolution Reaction Catalysts for Cell Reversal and Start/Stop Tolerance in Fuel Cells

Minute amounts of ruthenium and iridium on platinum nanostructured thin films have been evaluated in an effort to reduce carbon corrosion and Pt dissolution during transient conditions in proton exchange membrane fuel cells. Electrochemical tests showed the catalysts had a remarkable oxygen evolution reaction (OER) activity, even greater than that of bulk, metallic thin films. Stability tests within a fuel cell environment showed that rapid Ru dissolution could be managed with the addition of Ir. Membrane electrode assemblies containing a Ru to Ir atomic ratio of 1:9 were evaluated under startup/shutdown and cell reversal conditions for OER catalyst loadings ranging from 1 to 10 g/cm2. These tests affirmed that electrode potentials can be controlled through the addition of OER catalysts without impacting the oxygen reduction reaction on the cathode or the hydrogen oxidation reaction on the anode. The morphology and chemical structure of the thin OER layers were characterized by scanning transmission electron microscopy and X-ray photoelectron spectroscopy in an effort to establish a correlation between interfacial properties and electrochemical behavior.

Atanasoski, Radoslav↗
DOE OSTI2013

System for adding sulfur to a fuel cell stack system for improved fuel cell stability

A system for adding sulfur to a reformate stream feeding a fuel cell stack, having a sulfur source for providing sulfur to the reformate stream and a metering device in fluid connection with the sulfur source and the reformate stream. The metering device injects sulfur from the sulfur source to the reformate stream at a predetermined rate, thereby providing a conditioned reformate stream to the fuel cell stack. The system provides a conditioned reformate stream having a predetermined sulfur concentration that gives an acceptable balance of minimal drop in initial power with the desired maximum stability of operation over prolonged periods for the fuel cell stack.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Rate-sensitive and self-releasing battery cells and battery-cell structures as structural and/or energy-absorbing vehicle components

A battery system includes a load bearing structure having battery cells, or structures formed by battery cells, and at least one mechanical switch, and an electrical connection coupled with the battery cells of the load bearing structure. A battery has a rate-sensitive component that is configured to deform into a first state to provide a first reaction force under a mechanical loading of a first magnitude. The rate-sensitive component is configured to deform into a second state to provide a second reaction force under a mechanical loading of a second magnitude.

25 ENERGY STORAGE↗
DOE OSTI2019

Battery cell structure with limited cell penetrations

Light is transmitted from a light source through or from a separator of a battery cell and received by one or more light detectors. The light that is normally transmitted through the separator is scattered, absorbed, wavelength-shifted or otherwise distorted by an impending fault in the vicinity of or within the separator. The change in light due to the impending fault is measured by a detector and a signal from the detector is processed to identify the impending fault so that a warning can be generated indicative of the impending fault. In particular, one or both of the light source and detector are enclosed within a battery cell housing and receive power from the electrodes of the battery cell.

Saunders, James H.↗
DOE OSTI2012

Oriented Growth of Al2O3:ZnO Nanolaminates for Use as Electron-Selective Electrodes in Inverted Polymer Solar Cells

Atomic layer deposition is used to synthesize Al{sub 2}O{sub 3}:ZnO(1:x) nanolaminates with the number of deposition cycles, x, ranging from 5 to 30 for evaluation as optically transparent, electron-selective electrodes in polymer-based inverted solar cells. Al{sub 2}O{sub 3}:ZnO(1:20) nanolaminates are found to exhibit the highest values of electrical conductivity (1.2 x 10{sup 3} S cm{sup 01}; more than six times higher than for neat ZnO films), while retaining a high optical transmittance ({>=}80% in the visible region) and a low work function (4.0 eV). Such attractive performance is attributed to the structure (ZnO crystal size and crystal alignment) and doping level of this intermediate Al{sub 2}O{sub 3}:ZnO film composition. Polymer-based inverted solar cells using poly(3-hexylthiophene) (P3HT):phenyl-C{sub 61}-butyric acid methyl ester (PCBM) mixtures in the active layer and Al{sub 2}O{sub 3}:ZnO(1:20) nanolaminates as transparent electron-selective electrodes exhibit a power conversion efficiency of 3% under simulated AM 1.5 G, 100 mW cm{sup -2} illumination.

14 SOLAR ENERGY↗
DOE OSTI2021

How Useful are Conventional I–Vs for Performance Calibration of Single- and Two-Junction Perovskite Solar Cells? A Statistical Analysis of Performance Data on ≈200 Cells from 30 Global Sources

As perovskite photovoltaics (PV) advance from the laboratory to commercial prototypes, their accurate and reliable performance testing is becoming increasingly important. The well-documented dynamic response of perovskite solar cells to an external applied voltage has led to the development of steady-state performance measurement methods; however, these methods have not been widely adopted by the perovskite PV community. A key reason for this is that steady-state measurement methods take tens of minutes to complete, as opposed to conventional "fast" current-voltage (I-V) measurements usually lasting a few seconds. Fast I-Vs arise from a snapshot, almost always not a steady-state condition of the device; however, given their widespread use, the question arises: how do performance parameters of perovskite PV compare when measured with fast I-V and with a steady-state method? Results compiled from approximately 200 perovskite PV cells, including single junction, and two-terminal perovskite-perovskite and perovskite-Si tandems, show that fast I-Vs can provide a useful measure of the open-circuit voltage of the devices, while the short-circuit current and the overall efficiency can be widely misestimated. Here, the implications of these findings on performance testing protocols are discussed and possible options for fast and accurate testing of perovskite PV are proposed.

14 SOLAR ENERGY↗
DOE OSTI2024

Antisolvent‐Mediated Air Quench for High‐Efficiency Air‐Processed Carbon‐Based Planar Perovskite Solar Cells

Perovskite solar cells (PSCs) have becoma a leading low‐cost photovoltaic technology, achieving power conversion efficiencies (PCEs) of up to 26.1%. However, their commercialization is hindered by stability issues and the need for controlled processing environments. Carbon‐electrode‐based PSCs (C‐PSCs) offer enhanced stability and cost‐effectiveness compared to traditional metal‐electrode PSCs, i.e., Au and Ag. However, processing challenges persist, particularly in air conditions where moisture sensitivity poses a significant hurdle. Herein, a novel air processing technique is presented for planar C‐PSCs that incorporates antisolvent vapors, such as chlorobenzene, into a controlled air‐quenching process. This method effectively mitigates moisture‐induced instability, resulting in champion PCEs exceeding 20% and robust stability under ambient conditions. The approach retains 80% of initial efficiency after 30 h of operation at maximum power point without encapsulation. This antisolvent‐mediated air‐quenching technique represents a significant advancement in the scalable production of C‐PSCs, paving the way for future large‐scale deployment.

14 SOLAR ENERGY↗
DOE OSTI2014

Live-cell topology assessment of URG7, MRP6{sub 102} and SP-C using glycosylatable green fluorescent protein in mammalian cells

Highlights: • Glycosylatable GFP (gGFP) is developed for the use in mammalian cells. • gGFP selectively loses its fluorescence upon N-linked glycosylation in the ER lumen. • Differential fluorescence/glycosylation pattern probes membrane protein topology. • Membrane topology of URG7, MRP6{sub 102}, and SP-C was determined by gGFP tagging in vivo. - Abstract: Experimental tools to determine membrane topology of a protein are rather limited in higher eukaryotic organisms. Here, we report the use of glycosylatable GFP (gGFP) as a sensitive and versatile membrane topology reporter in mammalian cells. gGFP selectively loses its fluorescence upon N-linked glycosylation in the ER lumen. Thus, positive fluorescence signal assigns location of gGFP to the cytosol whereas no fluorescence signal and a glycosylated status of gGFP map the location of gGFP to the ER lumen. By using mammalian gGFP, the membrane topology of disease-associated membrane proteins, URG7, MRP6{sub 102}, SP-C(Val) and SP-C(Leu) was confirmed. URG7 is partially targeted to the ER, and inserted in C{sub in} form. MRP6{sub 102} and SP-C(Leu/Val) are inserted into the membrane in C{sub out} form. A minor population of untargeted SP-C is removed by proteasome dependent quality control system.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

The anode supported internal cathode tubular solid oxide fuel cell: Novel production of a cell geometry for combined heat and power applications

An effective strategy for generating combined heat and power (CHP) systems is to use the combustion of hydrocarbons to provide fuel reforming and heat production for solid oxide fuel cell (SOFC) operation. Though tubular SOFCs (tSOFCs) are well suited to the thermal cycling associated with combustion systems, they have a geometric limitation which requires significant alteration to the combustion chamber. These alterations can be eliminated by producing an anode supported internal cathode-tSOFC (IC-tSOFC) which can be directly integrated into the chamber with minimal alterations. Novel methods used to produce IC-tSOFCs are discussed in this work. Scanning electron microscopy (SEM) and performance characterization are used to analyze fabricated cells. Finally, with a peak power density of 369 mW∙cm –2 , and an open circuit voltage (OCV) of 0.98 V, it is confirmed that novel production methods for IC-tSOFCs have been successful.

08 HYDROGEN↗
DOE OSTI2018

Life-cycle implications of hydrogen fuel cell electric vehicle technology for medium- and heavy-duty trucks

This study provides a comprehensive and up-to-date life-cycle comparison of hydrogen fuel cell electric trucks (FCETs) and their conventional diesel counterparts in terms of energy use and air emissions, based on the ensemble of well-established methods, high-fidelity vehicle dynamic simulations, and real-world vehicle test data. For the centralized steam methane reforming (SMR) pathway, hydrogen FCETs reduce life-cycle or well-to-wheel (WTW) petroleum energy use by more than 98% compared to their diesel counterparts. The reduction in WTW air emissions for gaseous hydrogen (G.H2) FCETs ranges from 20-45% for greenhouse gases, 37-65% for VOC, 49-77% for CO, 62-83% for NOx, 19-43% for PM10, and 27-44% for PM2.5, depending on vehicle weight classes and truck types. With the current U.S. average electricity generation mix, FCETs tend to create more WTW SOx emissions than their diesel counterparts, mainly because of the upstream emissions related to electricity use for hydrogen compression/liquefaction. Compared to G.H2, liquid hydrogen (L.H2) FCETs generally provide smaller WTW emissions reductions. For both G.H2 and L.H2 pathways for FCETs, because of electricity consumption for compression and liquefaction, spatio-temporal variations of electricity generation can affect the WTW results. FCETs retain the WTW emission reduction benefits, even when considering aggressive diesel engine efficiency improvement.

air emissions↗
DOE OSTI2020

Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum cobalt/high surface area carbon based polymer electrolyte fuel cells

Improvements in polymer electrolyte fuel cell (PEFC) electrode performance have primarily focused on catalyst and ionomer developments, marginalizing the importance of catalyst ink formulation. In this study, the effect of ink formulation is examined across a series of cathodes comprised of PtCo supported on high surface area carbon (PtCo/ HSC ) and Nafion ionomer using an array of in situ electrochemical and ex situ characterization techniques. In contrast to prior work on Pt/Vu systems, ink water content had little effect on the electrochemically determined ionomer coverage for the PtCo/HSC electrocatalyst examined here. Characterization using nano-scale resolution X-ray computed tomography (nano-CT) demonstrated that water-rich ink formulations lead to a reduction in aggregate size (ionomer + PtCo/HSC), improving local O 2 transport. This understanding, combined with the use of a commercially-available electrocatalyst was used to produced state-of-the-art membrane electrode assemblies with Pt loadings of 0.03/0.08 mg Pt /cm 2 on the anode and cathode respectively, having; i) > 1 A/mg Pt (0.9 V iR-free , 150 kPa, 80 °C, 100% RH, H 2 /O 2 ), ii) 320 mA/cm 2 at 0.8 V, 150 kPa, 80 ° C, 100% RH, H 2 /Air), and iii) > 1 W/cm 2 elec at rated power (0.67 V, 250 kPa, 94 °C, 65% RH, H 2 /Air) or < 0.11 g Pt /kW rated .

25 ENERGY STORAGE↗
DOE OSTI2012

The significance of the host inflammatory response on the therapeutic efficacy of cell therapies utilising human adult stem cells

Controlling the fate of implanted hMSCs is one of the major drawbacks to be overcome to realize tissue engineering strategies. In particular, the effect of the inflammatory environment on hMSCs behaviour is poorly understood. Studying and mimicking the inflammatory process in vitro is a very complex and challenging task that involves multiple variables. This research addressed the questions using in vitro co-cultures of primary derived hMSCs together with human peripheral blood mononucleated cells (PBMCs); the latter are key agents in the inflammatory process. This work explored the in vitro phenotypic changes of hMSCs in co-culture direct contact with monocytes and lymphocytes isolated from blood using both basal and osteogenic medium. Our findings indicated that hMSCs maintained their undifferentiated phenotype and pluripotency despite the contact with PBMCs. Moreover, hMSCs demonstrated increased proliferation and were able to differentiate specifically down the osteogenic lineage pathway. Providing significant crucial evidence to support the hypothesis that inflammation and host defence mechanisms could be utilised rather than avoided and combated to provide for the successful therapeutic application of stem cell therapies.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Role of human amnion-derived mesenchymal stem cells in promoting osteogenic differentiation by influencing p38 MAPK signaling in lipopolysaccharide -induced human bone marrow mesenchymal stem cells

Periodontitis is a chronic inflammatory disease induced by bacterial pathogens, which not only affect connective tissue attachments but also cause alveolar bone loss. In this study, we investigated the anti-inflammatory effects of Human amnion-derived mesenchymal stem cells (HAMSCs) on human bone marrow mesenchymal stem cells (HBMSCs) under lipopolysaccharide (LPS)-induced inflammatory conditions. Proliferation levels were measured by flow cytometry and immunofluorescence staining of 5-ethynyl-2′-deoxyuridine (EdU). Osteoblastic differentiation and mineralization were investigated using chromogenic alkaline phosphatase activity (ALP) activity substrate assays, Alizarin red S staining, and RT-PCR analysis of HBMSCs osteogenic marker expression. Oxidative stress induced by LPS was investigated by assaying reactive oxygen species (ROS) level and superoxide dismutase (SOD) activity. Here, we demonstrated that HAMSCs increased the proliferation, osteoblastic differentiation, and SOD activity of LPS-induced HBMSCs, and down-regulated the ROS level. Moreover, our results suggested that the activation of p38 MAPK signal transduction pathway is essential for reversing the LPS-induced bone-destructive processes. SB203580, a selective inhibitor of p38 MAPK signaling, significantly suppressed the anti-inflammatory effects in HAMSCs. In conclusion, HAMSCs show a strong potential in treating inflammation-induced bone loss by influencing p38 MAPK signaling. - Highlights: • LPS inhibites osteogenic differentiation in HBMSCs via suppression of p38 MAPK signaling pathway. • HAMSCs promote LPS-induced HBMSCs osteogenic differentiation through p38 MAPK signaling pathway. • HAMSCs reverse LPS-induced oxidative stress in LPS-induced HBMSCs through p38 MAPK signaling pathway.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Double Perovskite Interlayer Stabilized Highly Efficient Perovskite Solar Cells

Metal halide perovskite solar cell (PSC) technology has an impressive power conversion efficiency (PCE) exceeding 26.1% and demonstrates cost-effective manufacturing. However, the stability of these PSCs poses a significant challenge, hindering their widespread manufacturing and commercialization. To tackle the degradation issue inherent in PSCs, surface passivation techniques, particularly employing a thin layer of two-dimensional (2D) perovskites, create a 2D/3D heterostructure. Beyond this, the exploration of metal halide double perovskites adds a new dimension to the chemical and band gap phase space of materials for optoelectronic applications. In this study, we leverage a wide band gap double perovskite interlayer to enhance the stability of 3D metal halide perovskite. Specifically, the double perovskite nanoparticle Cs 2 AgBiBr 6 , with its substantial band gap of 2.2 eV and exceptional air stability, is utilized. Through optimization, a Cs 2 AgBiBr 6 -treated PSC achieves an open-circuit voltage of 1.12 V and an impressive PCE of 19.52%. Additionally, the Cs 2 AgBiBr 6 passivation layer proves to be effective in bolstering the stability of PSCs. This work demonstrates an additional strategy and design motif to simultaneously increase the PCE of PSCs along with achieving improved stability.

14 SOLAR ENERGY↗