Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Flow conditions around the exit and downstream of certain stator blading with various trailing edge thicknesses and geometries

The blading investigated was curved back with thick profiles. The variations in flow conditions considered were flow angle and isentropic energy. Experimental data were obtained in a two-dimensional cascade from surveys with a combined angle, total-, and static-pressure probe and from an array of end-wall static pressure taps. Analytical results were obtained from ideal flow theory. The results showed large variations in flow conditions close to the plane of the trailing edge that were largely attenuated at a distance a little greater than one blade pitch downstream of the trailing edge in the direction of flow. The results were affected by the geometry and thickness of the trailing edge. The agreement between experimental and analytical results is generally fair to excellent.

Prust, H. W., Jr.↗

Study of cavitating inducer instabilities

An analytic and experimental investigation into the causes and mechanisms of cavitating inducer instabilities was conducted. Hydrofoil cascade tests were performed, during which cavity sizes were measured. The measured data were used, along with inducer data and potential flow predictions, to refine an analysis for the prediction of inducer blade suction surface cavitation cavity volume. Cavity volume predictions were incorporated into a linearized system model, and instability predictions for an inducer water test loop were generated. Inducer tests were conducted and instability predictions correlated favorably with measured instability data.

Young, W. E.↗

Comparative evaluation of ERTS-A imagery for resource inventory in land use planning

There are no author-identified significant results in this report. Evaluation has begun on ERTS-1 imagery of Crook County for use in landform interpretation and geologic mapping and interpretation. Outside of Crook County the geology team has been impressed by the display of fault patterns in southeastern Oregon and has begun preliminary analyses of these. Using the color combiner a complete timber type map of (1) all the forest land within Crook County, and (2) all the Ochoco National Forest has been completed. The timber types consist of five density classes which are correlated with different species compositions as the first step in the multistage forest inventory. Using the ERTS magnetic tape data the computer center has produced a 12 by 25 mile strip printout of bands 5, 6, and 7. The computer printouts are to be analyzed for different timber types and possible insect damage. Other results are: (1) limited number of clearcuts in eastern Oregon and in Cascades evident; (2) positive transparencies of band 5 appear to be too dark for maximum information of forested areas; and (3) much more information in the computer printouts of bands 6 and 7, than 5, when analyzing forest conditions.

Simonson, G. H.↗

Automated thematic mapping and change detection of ERTS-A images

There are no author-identified significant results in this report. This investigation is concerned with the development of automated interpretation techniques for the recognition and identification of earth resources. The resources will be identified by using both multispectral and spatial signatures. Ground truth data and aircraft underflight photography will be used to train the recognition algorithms. The data processed will be RBV and MSS images acquired by ERTS-1 satellite, over six test sites located in the vicinities of: Phoenix, Arizona; Weslaco, Texas; Cascade Mountains, Washington; New Orleans, Louisiana; Salt Lake City, Utah; and Salton Sea, California. The processed data will be thematic maps of resources consisting of annotated and outlined images. The seasonal changes of hydrologic and agricultural resources will also be identified. The results are expected to be applicable to a future automatic system of resource inventory and management.

Gramenopoulos, N.↗

Experimental investigation of aerodynamic performance of cooled turbine vanes at gas- to collant-temperature ratios up to 2.75

The results of an experimental investigation of the aerodynamic performance of two geometrically similar turbine vanes with different cooling designs are presented. The test vanes were a convection-film-cooled vanes and a transpiration-cooled vane. A solid uncooled vane with the same aerodynamic profile as the cooled vane was also tested. Four vanes of each type were tested in an annular sector cascade. The cooled vanes were tested at primary to coolant temperature ratios of 1.0, 1.75, and 2.75 and a coolant to primary pressure ratios of 1.0, 1.2, and 1.5. This resulted in coolant flows up to about 10 percent of the primary flow. The principal measurements were surveys of vane exit total pressure, total temperature, and static pressure. The report includes a brief description of the test facility and the design of the test vanes. The test results presented include weight flow and efficiency data for the uncooled vanes and coolant flow, primary flow, and efficiency data as functions of the cooling variables for the cooled vanes.

Stabe, R. G.↗

Delta modulation

The results are presented of a study dealing with the problems of source encoding using delta modulation. An algorithm is described which was employed in the design of an adaptive delta modulation. The algorithm is extremely inexpensive to implement and features extremely desirable characteristics such as a 40 db dynamic range and a 90 percent non-redundant word intelligibility at a bit rate of 9.6 kb/s. A new concept is presented in delta modulation design, the nth-order delta modulator. The nth order delta modulator increases the maximum SNR of a delta modulator but not its dynamic range. It is shown that a 2nd order delta modulator, which employs two delta modulators in cascade, results in a 15 db output SNR improvement over a linear delta modulator operating at 27 db. Two additional areas of research are discussed. The first area involves decomposition of voice and the second is concerned with the source encoding of video signals.

Schilling, D. L.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The percentage of snow cover area on specific drainage basins was measured from ERTS-1 imagery by video density slicing with a repeatability of 4 percent of the snow covered area. Data from ERTS-1 images of the melt season snow cover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculations of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS-1 images with maps. ERTS-1 imagery was also successfully used to measure glacier accumulation area ratios for a small test basin.

Meier, M. F.↗

Automated thematic mapping and change detection of ERTS-A images

The author has identified the following significant results. This investigation is concerned with the development of automated interpretation techniques for the recognition and identification of earth resources. The resources will be identified by using both multispectral and spatial signatures. Ground truth data and aircraft underflight photography will be used to train the recognition algorithms. The data processed will be RBV and MSS images acquired by the ERTS-1 satellite, over six tests sites located in the vicinities of: Phoenix, Arizona; Weslaco, Texas; Cascade Mountains, Washington; New Orleans, Louisiana; Salt Lake, Utah; and Salton Sea, California. The processed data will be thematic maps of resources consisting of annotated and outlined images. The seasonal changes of hydrologic and agricultural resources will also be identified. The results are expected to be applicable to a future automatic system of resource inventory and management.

Gramenopoulos, N.↗

Stability of uncertain systems

The asymptotic properties of feedback systems are discussed, containing uncertain parameters and subjected to stochastic perturbations. The approach is functional analytic in flavor and thereby avoids the use of Markov techniques and auxiliary Lyapunov functionals characteristic of the existing work in this area. The results are given for the probability distributions of the accessible signals in the system and are proved using the Prohorov theory of the convergence of measures. For general nonlinear systems, a result similar to the small loop-gain theorem of deterministic stability theory is given. Boundedness is a property of the induced distributions of the signals and not the usual notion of boundedness in norm. For the special class of feedback systems formed by the cascade of a white noise, a sector nonlinearity and convolution operator conditions are given to insure the total boundedness of the overall feedback system.

Blankenship, G. L.↗

Quenching of the fluorescence of NO2

The fluorescence yield of NO2 was monitored at 25 C with incident wavelengths of 4047, 4358, and 4800A at fluorescence wavelengths of 4860, 5577, and 6300A. The NO2 pressure was varied between 0.004 and 0.080 torr. Measurements were taken both in the absence of foreign gases and in the presence of up to 30 torr. He, N2, and O2 at each NO2 pressure. In the absence of foreign gases, the self quenching follows a Stern-Volmer quenching mechanism, but foreign-gas quenching shows marked deviations from this mechanism. Both from lifetime and kinetic considerations, it is argued that the electronic state formed by absorption of the radiation cannot be the emitting state. Emission occurs from several vibrational levels of the emitting state, the various vibrational levels being formed by collisional cascade reactions. The appropriate quenching rate constant ratios were measured and tabulated. Even the two electronic state mechanism is insufficient to explain all the observations.

Braslavsky, S.↗

Optical modulator system

The fabrication, test, and delivery of an optical modulator system which will operate with a mode-locked Nd:YAG laser indicating at either 1.06 or 0.53 micrometers is discussed. The delivered hardware operates at data rates up to 400 Mbps and includes a 0.53 micrometer electrooptic modulator, a 1.06 micrometer electrooptic modulator with power supply and signal processing electronics with power supply. The modulators contain solid state drivers which accept digital signals with MECL logic levels, temperature controllers to maintain a stable thermal environment for the modulator crystals, and automatic electronic compensation to maximize the extinction ratio. The modulators use two lithium tantalate crystals cascaded in a double pass configuration. The signal processing electronics include encoding electronics which are capable of digitizing analog signals between the limit of + or - 0.75 volts at a maximum rate of 80 megasamples per second with 5 bit resolution. The digital samples are serialized and made available as a 400 Mbps serial NRZ data source for the modulators. A pseudorandom (PN) generator is also included in the signal processing electronics. This data source generates PN sequences with lengths between 31 bits and 32,767 bits in a serial NRZ format at rates up to 400 Mbps.

Brand, J.↗

An adverse effect of film cooling on the suction surface of a turbine vane

A J-75 size turbine vane with film cooling holes on the suction surface near the leading edge was tested with and without film cooling flow in a four vane cascade. Results show that the cooling effectiveness on the aft portion of the vane suction surface can decrease with the addition of film cooling near the leading edge. Apparently the film cooling air flow caused a laminar or transitional boundary layer to become a transitional or turbulent boundary layer. The vane was tested at a gas temperature and pressure of 1260 K (1800 F) and 22.7 newtons per square centimeter (33 psia), a coolant temperature of 280 K (50 F), film cooling flow ratios from 0.0 to 0.026, and backside midchord cooling flow ratios of 0.007 and 0.035.

Gladden, H. J.↗

Utilizing ERTS-A imagery for tectonic analysis through study of Big Horn Mountains region

The author has identified the following significant results. Winter imagery in December 6-10, 1972 and January 11-13, 1972, provides optimum snow cover and depth such that, along with low sun angle, topography and drainage are markedly enhanced. Several features are visible that are poorly, or even not distinguishable on clear scenes without snow. Examples are Bear Butte (igneous plug) and Elkhorn Peak (dome) on scene (1136-17130), northeastern Black Hills, (1172-17130) a linear linking the Cascade anticline and Cretaceous hogbacks near Hot Springs, S. D. south to the Niobrara River, and (1140-17373) the Lake Basin fault zone north of Billings, Montana. Extremely heavy snows in April completely blot out all vegetation and topography in the Bighorn, Wind River, and Beartooth ranges.

Hoppin, R. A.↗

Evaluation of ERTS imagery for mapping and detection of changes of snowcover land and on glaciers

The percentage of snowcover area on specific drainage basins was measured from ERTS imagery by video density slicing with a repeatability of 4 percent of the snowcovered area. Data from ERTS images of the melt season snowcover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculation of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS images with maps with an accuracy of about 60 m under favorable conditions. Ability to map snowcover or to determine snowline altitude depends primarily on cloud cover and vegetation and secondarily on slope, terrain roughness, sun angle, radiometric fidelity, and amount of spectral information available.

Meier, M. F.↗

Characteristics of cesium iodide for use as a particle discriminator for high energy cosmic rays

The possible use of CsI to discriminate between high energy cosmic ray electrons and interacting protons has been investigated. The pulse-shape properties as a function of ionization density, temperature, and spectral response are presented for thallium-activated CsI and as a function of ionization density for sodium-activated CsI. The results are based on previously published data and on corroborative measurements from the present work. Experimental results on the response of CsI to electron-induced electromagnetic cascades and to interacting hadrons are described. Bibliographies of publications dealing with the properties of CsI and with pulse-shape discrimination techniques are presented.

Crannell, C. J.↗

Study to develop improved spacecraft snow survey methods using Skylab/EREP data

The author has identified the following significant results. The initial analysis of EREP data from the SL-2 mission has been undertaken. Snow distributions are being mapped from the S190A photography for three mountain areas: the Sierra Nevadas; the Cascades near Washington-Oregon border; and the Wasatch Range in Utah. In the S192 screening film, a dramatic reversal in the reflectance of the snow in the Wasatch Range is observed between the visible and near IR channels. In channel 2 (0.46 - 0.51 microns) the snow has a high reflectance, whereas in channel 11 (1.55 - 1.75 microns) the snow appears almost black, having a much lower reflectance than the surrounding terrain. The sharp drop in reflectance in the near IR channel is believed to be due to the existence of melt water on the snow surface. Although investigators have reported this effect previously using ERTS-1 imagery, the S192 data provides the first opportunity to study quantitatively the snow reflectance in several visible and near IR channels. The results will have direct application for developing a technique to determine the condition of the snow surface (i.e., dry of melting), a significant parameter in snow hydrology.

Barnes, J. C.↗

Atmospheric helium and geomagnetic field reversals.

The problem of the earth's helium budget is examined in the light of recent work on the interaction of the solar wind with nonmagnetic planets. It is proposed that the dominant mode of helium (He4) loss is ion pumping by the solar wind during geomagnetic field reversals, when the earth's magnetic field is very small. The interaction of the solar wind with the earth's upper atmosphere during such a period is found to involve the formation of a bow shock. The penetration altitude of the shock-heated solar plasma is calculated to be about 700 km, and ionization rates above this level are estimated for a cascade ionization (electron avalanche) process to average 10 to the 9th power ions/sq cm/sec. The calculated ionization rates and the capacity of the solar wind to remove ionized helium (He4) from the upper atmosphere during geomagnetic dipole reversals are sufficient to yield a secular equilibrium over geologic time scales. The upward transport of helium from the lower atmosphere under these conditions is found to be adequate to sustain the proposed loss rate.

Sheldon, W. R.↗

Theoretical, quasi-static analysis of cavitation compliance in turbopumps.

The serious POGO instability experienced by many liquid propellant rockets results from a closed loop interaction between the first longitudinal structural mode of vibration and the dynamics of the propulsion system. One of the most important features in the latter is the cavitation compliance of the turbopumps. This report presents calculations of the blade cavitation compliance obtained from free streamline cascade theory and demonstrates the various influences of angle of attack, blade angle, blade thickness and cavitation number. Discrepancies between calculated and experimentally derived values are discussed.

Brennen, C.↗