Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Design and development of a 6 MW peak, 24 kW average power S-band klystron

A 6 MW peak, 24 kW average power S-band Klystron is under development at CEERI, Pilani under an MoU between BARC and CEERI. The design of the klystron has been completed. The electron gun has been designed using TRAK and MAGIC codes. RF cavities have been designed using HFSS and CST Microwave Studio while the complete beam wave interaction simulation has been done using MAGIC code. The thermal design of collector and RF window has been done using ANSYS code. A Gun Collector Test Module (GCTM) was developed before making actual klystron to validate gun perveance and thermal design of collector. A high voltage solid state pulsed modulator has been installed for performance valuation of the tube. The paper will cover the design aspects of the tube and experimental test results of GCTM and klystron. (author)

43 PARTICLE ACCELERATORS↗

Estimation of average burnup of damaged fuels loaded in Fukushima Dai-ichi reactors by using the {sup 134}Cs/{sup 137}Cs ratio method

Average burnup of damaged fuels loaded in Fukushima Dai-ichi reactors is estimated, using the {sup 134}Cs/{sup 137}Cs ratio method for measured radioactivities of {sup 134}Cs and {sup 137}Cs in contaminated soils within the range of 100 km from the Fukushima Dai-ichi nuclear power plants. As a result, the measured {sup 134}Cs/{sup 137}Cs ratio from the contaminated soil is 0.996{+-}0.07 as of March 11, 2011. Based on the {sup 134}Cs/{sup 137}Cs ratio method, the estimated burnup of damaged fuels is approximately 17.2{+-}1.5 [GWd/tHM]. It is noted that the numerical results of various calculation codes (SRAC2006/PIJ, SCALE6.0/TRITON, and MVP-BURN) are almost the same evaluation values of {sup 134}Cs/ {sup 137}Cs ratio with same evaluated nuclear data library (ENDF-B/VII.0). The void fraction effect in depletion calculation has a major impact on {sup 134}Cs/{sup 137}Cs ratio compared with the differences between JENDL-4.0 and ENDF-B/VII.0. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An evaluation of nearest neighbor averaging's improvements to the measurement sensitivity of wide-area radiological scanning instruments - 15560

Through the Sandia National Laboratories (SNL) New Mexico Small Business Assistance (NMSBA) program, Sandia worked with the Environmental Restoration Group (ERG) Inc. to verify and validate a novel algorithm used to determine the scanning Critical Level (Lc) and Minimum Detectable Concentration (MDC) (or Minimum Detectable Areal Activity) for the 102F scanning system. Through the use of Monte Carlo statistical simulations the algorithm mathematically demonstrates accuracy in determining the Lc and MDC when a nearest-neighbor averaging (NNA) technique was used. To empirically validate this approach, SNL prepared several spiked sources and ran a test with the ERG 102F instrument on a bare concrete floor known to have no radiological contamination other than background naturally occurring radioactive material (NORM). The tests conclude that the NNA technique increases the sensitivity (decreases the Lc and MDC) for high-density data maps that are obtained by scanning radiological survey instruments. It is further described in Sandia Laboratories document number SAND2014-16522. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Actively cooled optical substrates for high average power reflective or diffractive optic

Integrated active cooling of high-power reflective or diffractive optics uses substrates manufactured from low-expansion ceramics to flow coolant between the back surface of the substrate and chambers behind but adjacent a reflective front surface, in a direction transverse to the front surface, to thereby achieve much greater average power handling than known cooling techniques.

Power, Erik P.↗

ECAR-7932 Rev 0 Large Eddy Simulation of MARVEL Reactor Core Subchannel to Evaluate Model Uncertainty of Reynolds-Averaged Navier-Stokes Equation Based Computational Fluid Dynamics Analysis

In the previous work (ECAR-7210), the peak cladding temperature of the MARVEL microreactor has been evaluated by steady-state Reynolds-Averaged Navier-Stokes (RANS) based computational fluid dynamics (CFD) simulations. Although numerical uncertainties of RANS-based CFD simulations has been assessed in ECAR-7210, the model uncertainty of RANS turbulence models must be investigated to resolve the issues related to inaccurate prediction of turbulent heat flux and flow pulsation in a tight lattice rod bundle using the steady-state RANS simulations. Consequently, this ECAR conducted a high-fidelity CFD analysis utilizing Large Eddy Simulation (LES) to generate reference data and investigated the model uncertainty of RANS-based CFD simulations.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Seismic Tomography Of Pg And Sg/lg And Its Use For Average Upper Crust Structure In Eurasia

Tomographic inversion oftravel times from first arriving compressional and shear waves for velocity structure has been applied with great success at all length scales, ranging from the laboratory bench-top to the entire Earth. Inversion of later arriving phases has seen a much more limited application. In this paper we present inversion results for regional Pg and Sg for the Eurasian continent to explore its use for understanding average upper crustal velocity structure. Inversion is performed using a damped, smoothed LSQR implementation that solves for site and event terms as well as for velocity along great circle paths between the source and receiver. Results are broadly consistent with published upper crustal velocities for the region. A spotcomparison of Vp/Vs from local and regional studies also compares well with the ratio of observed Pg to Sg velocities from our study where resolution is high. Resolution is determined through the use of checkerboard tests, and these suggest that in regions where data density is high we can resolve features down to at least 2 deg, with 4 deg possible over broader areas. RMS residual reductions are on the order of25% for Sg and 30% for Pg.

58 GEOSCIENCES↗

Combining multi-objective optimization and bayesian model averaging to calibrate forecast ensembles of soil hydraulic models

Most studies in vadose zone hydrology use a single conceptual model for predictive inference and analysis. Focusing on the outcome of a single model is prone to statistical bias and underestimation of uncertainty. In this study, we combine multi-objective optimization and Bayesian Model Averaging (BMA) to generate forecast ensembles of soil hydraulic models. To illustrate our method, we use observed tensiometric pressure head data at three different depths in a layered vadose zone of volcanic origin in New Zealand. A set of seven different soil hydraulic models is calibrated using a multi-objective formulation with three different objective functions that each measure the mismatch between observed and predicted soil water pressure head at one specific depth. The Pareto solution space corresponding to these three objectives is estimated with AMALGAM, and used to generate four different model ensembles. These ensembles are post-processed with BMA and used for predictive analysis and uncertainty estimation. Our most important conclusions for the vadose zone under consideration are: (1) the mean BMA forecast exhibits similar predictive capabilities as the best individual performing soil hydraulic model, (2) the size of the BMA uncertainty ranges increase with increasing depth and dryness in the soil profile, (3) the best performing ensemble corresponds to the compromise (or balanced) solution of the three-objective Pareto surface, and (4) the combined multi-objective optimization and BMA framework proposed in this paper is very useful to generate forecast ensembles of soil hydraulic models.

58 GEOSCIENCES↗

Particle-In-Cell/Monte Carlo Simulation of Ion Back BomBardment in a High Average Current RF Photo-Gun

In this paper, we report on study of ion back bombardment in a high average current radio-frequency (RF) photo-gun using a particle-in-cell/Monte Carlo simulation method. Using this method, we systematically studied effects of gas pressure, RF frequency, RF initial phase, electric field profile, magnetic field, laser repetition rate, different ion species on ion particle line density distribution, kinetic energy spectrum, and ion power line density distribution back bombardment onto the photocathode. Those simulation results suggested that effects of ion back bombardment could increase linearly with the background gas pressure and laser repetition rate. The RF frequency has significantly affected the ion motion inside the gun so that the ion power deposition on the photocathode in an RF gun can be several orders of magnitude lower than that in a DC gun. The ion back bombardment can be minimized by appropriately choosing the electric field profile and the initial phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ensemble-Averaging Resolves Rapid Atmospheric Response to the 2017 Total Solar Eclipse [Rapid Resolution of the Atmospheric Response to the 2017 Total Solar Eclipse]

Rapid changes in solar radiative forcing influence heat, scalar and momentum fluxes and thereby shift the trajectory of near-surface atmospheric transitions. Surface fluxes are difficult to obtain during atmospheric transitions by either bulk or eddy-covariance methods because both techniques assume quasi-stationarity in an atmospheric state and require sufficiently long blocks of data, typically on the order of 10–30 min, to obtain statistically significant results. These computational requirements limit the temporal resolution of atmospheric processes that researchers can examine using traditional measurement techniques. In this paper, we present a novel observational approach to calculate surface fluxes at sub-minute temporal resolutions.

54 ENVIRONMENTAL SCIENCES↗

Conditionally averaged balance equations for modeling premixed turbulent combustion in flamelet regime

Balance equations for mass, velocity, and Reynolds stresses conditioned either to an unburned or to a burned mixture are derived from standard mass conservation, Navier-Stokes, and combustion progress variable balance equations by assuming that the probability of finding intermediate states of a reacting mixture is much less than unity. The derived equations contain three unclosed terms controlled by flamelet structure and flamelet statistics, whereas other unclosed terms are not straightforwardly affected by heat release and have counterparts in models of nonreacting flows. Equations of this type offer an opportunity to facilitate modeling the effects of heat release on turbulence. The modeling of these effects is further simplified if flamelet structure perturbations by turbulent eddies are neglected. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Average charge states of heavy ions in rarefied hydrogen

In this work, we present the results of experiments on measuring the charges of heavy ions from Rn (Z=86) to Og (Z=118) in rarefied hydrogen performed at the DGFRS and DGFRS-2 separators. Two formulae are proposed that can be used to calculate the charges of ions in H 2 and which take into account the influence of the shell structure of atoms on the charge value. The accuracy of estimating the charge of ions of superheavy atoms was measured to be 2%. The charges of Ra, Th, and No ions were measured at a hydrogen pressure from 0.5 to 3.3 mbar, which allowed us to evaluate the effect of H 2 density on the charge value. A formula is proposed to account for the effect of gas density when performing experiments at different gas pressures. It is shown that the results of experiments performed at different separators DGFRS and DGFRS-2 are in good agreement with each other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗