Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “astronomy computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Dilaton-Assisted Dark Matter

A dilaton could be the dominant messenger between standard model fields and dark matter. The measured dark matter relic abundance relates the dark matter mass and spin to the conformal breaking scale. The dark matter-nucleon spin-independent cross section is predicted in terms of the dilaton mass. We compute the current constraints on the dilaton from LEP and Tevatron experiments, and the gamma-ray signal from dark matter annihilation to dilatons that could be observed by Fermi Large Area Telescope.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental Phase Functions of Millimeter-sized Cosmic Dust Grains

We present the experimental phase functions of three types of millimeter-sized dust grains consisting of enstatite, quartz, and volcanic material from Mount Etna, respectively. The three grains present similar sizes but different absorbing properties. The measurements are performed at 527 nm covering the scattering angle range from 3° to 170°. The measured phase functions show two well-defined regions: (i) soft forward peaks and (ii) a continuous increase with the scattering angle at side- and back-scattering regions. This behavior at side- and back-scattering regions is in agreement with the observed phase functions of the Fomalhaut and HR 4796A dust rings. Further computations and measurements (including polarization) for millimeter-sized grains are needed to draw some conclusions about the fluffy or compact structure of the dust grains.

79 ASTRONOMY AND ASTROPHYSICS↗

Decay time of type III solar bursts observed at kilometric wavelengths.

Type III bursts were observed between 3.5 MHz and 50 kHz by the University of Michigan radio astronomy experiment aboard the OGO-5 satellite. Decay times were measured and then combined with published data ranging up to about 200 MHz. The observed decay times increase with decreasing frequency, but at a rate considerably slower than that expected from electron-proton Coulomb collisions. At 50 kHz, values differ by about a factor of 100. Using Hartle and Sturrock's solar wind model, Coulomb collisional frequencies were computed and compared with the apparent collisional frequencies deduced from the observations. It was found that the ratio of observed to computed values varies with heliocentric distance according to an inverse 0.71 power.

Alvarez, H.↗

DSN research and technology support

The activities of the Venus Station (DSS 13) and the Microwave Test Facility (MTF) during the period April 19 through June 13, 1976, are discussed and progress noted. Continuing reliability testing and computer program refinement of the remote controlled, unattended automated pulsar observing station is noted, along with routine observations of 17 pulsars. Radar observations of a geostationary satellite are reported, along with the routine automatic testing of the stability of the DSS 13 maser-receiving system. Additional testing of thermal characteristics of semiflexible coaxial cables is reported, along with phase stabilization measurements thereon. Routine support of the planetary radio astronomy experiment, with 43.25 hours of observations of Jupiter and various radio calibration sources, is reported, along with 18.75 hours of differential VLBI observations in conjunction with Australia, DSS 43. Modifications of the clock synchronization winterization system are reported, along with a discussion of the activities of the DSN High-Power Transmitter Maintenance Facility.

Jackson, E. B.↗

AstroBetter: A Blog and Wiki for Professional Astronomers

AstroBetter.com is a multi-contributor blog and wiki website designed for information sharing among professional astronomers. The goal of the site is to increase the productivity of astronomers by creating a centralized location for tips and tools of our multifaceted trade. Our content includes topics related to data reduction and analysis, general computing, writing papers and proposals, giving talks, teaching, career planning, productivity, organization, and diversity and equity in science and education. While we have several contributors, the site is intended to be community driven and we encourage everyone to publish to the wiki, submit guest posts, suggest post ideas, and to comment on blog entries. One of our primary goals is to consolidate and reduce the transient nature of the astronomy community's collective knowledge base by having an active wiki. Currently, the most common way to share astro-centric tools and tips that are not appropriate for a published paper, is to put them on an individual's website. However, the average astronomer's website will have at least four different addresses over the course of their career and only the site owner can edit the content. As a result, information on personal websites goes stale very quickly and deal links to such sites abound. It is our hope that community maintained wikis, such as the one hosted on AstroBetter, will gradually replace the personal website. In this poster we introduce the contributors to AstroBetter, show statistics about our current readership, give excerpts of some of our most popular posts and wiki entries, and show how anyone can add or edit content on the wiki. The goal of this poster is to spread the work about AstroBetter and increase our community of readers and wiki editors, because together, we can AstroBetter.

Rigby, Jane↗

Nuclear Density Functional Theory

An understanding of atomic nuclei is crucial for a complete nuclear theory, for nuclear astrophysics, for performing new experimental tasks, and for various other applications. Within a density functional theory, the total binding energy of the nucleus is given by a functional of the nuclear density matrices and their derivatives. The variation of the energy density functional with respect to particle and pairing densities leads to the Hartree-Fock-Bogoliubov equations. The "Universal Nuclear Energy Density Functional" (UNEDF) SciDAC project, to develop and optimize the energy density functional for atomic nuclei using state-of-the-art computational infrastructure, is briefly described. The ultimate goal is to replace current phenomenological models of the nucleus with a well-founded microscopic theory with minimal uncertainties, capable of describing nuclear data and extrapolating to unknown regions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Gas scintillation drift chambers with wave shifter read-out for hard X-ray astronomy

A major improvement in hard X-ray and gamma ray astrophysics could be provided by high pressure xenon time projection chambers where gas scintillation is used both for the measurement of the time of interaction and for the detection of the extracted electrons. This allows three dimensional imaging of naturally complex events (photoelectric interaction with escape photon, Compton scatter, and pair production). A novel read-out system based on wave shifter fibers, which is well suited to the high pressures and large areas required of a hard X-ray telescope is proposed. Expected performances are computed, potential problems are outlined, and the experimental effort to solve these problems are described.

Sadoulet, Bernard↗

Classical Benchmarks for Variational Quantum Eigensolver Simulations of the Hubbard Model

Simulating the Hubbard model is of great interest to a wide range of applications within condensed matter physics, however its solution on classical computers remains challenging in dimensions larger than one. The relative simplicity of this model, embodied by the sparseness of the Hamiltonian matrix, allows for its efficient implementation on quantum computers, and for its approximate solution using variational algorithms such as the variational quantum eigensolver. While these algorithms have been shown to reproduce the qualitative features of the Hubbard model, their quantitative accuracy in terms of producing true ground state energies and other properties, and the dependence of this accuracy on the system size and interaction strength, the choice of variational ansatz, and the degree of spatial inhomogeneity in the model, remains unknown. Here we present a rigorous classical benchmarking study, demonstrating the potential impact of these factors on the accuracy of the variational solution of the Hubbard model on quantum hardware, for systems with up to 32 qubits. We find that even when using the most accurate wavefunction ansätze for the Hubbard model, the error in its ground state energy and wavefunction plateaus for larger lattices, while stronger electronic correlations magnify this issue. Concurrently, spatially inhomogeneous parameters and the presence of off-site Coulomb interactions only have a small effect on the accuracy of the computed ground state energies. Our study highlights the capabilities and limitations of current approaches for solving the Hubbard model on quantum hardware, and we discuss potential future avenues of research.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PARAS program: Phased array radio astronomy from space

An orbiting radio telescope is proposed which, when operated in a Very Long Baseline Interferometry (VLBLI) scheme, would allow higher (than currently available) angular resolution and dynamic range in the maps, and the ability of observing rapidly changing astronomical sources. Using a passive phases array technology, the proposed design consists of 656 hexagonal modules forming a 150 meter diameter dish. Each observatory module is largely autonomous, having its own photovoltaic power supply and low-noise receiver and processor for phase shifting. The signals received by the modules are channeled via fiber optics to the central control computer in the central bus module. After processing and multiplexing, the data is transmitted to telemetry stations on the ground. The truss frame supporting each observatory pane is a hybrid structure consisting of a bottom graphite/epoxy tubular triangle and rigidized inflatable Kevlar tubes connecting the top observatory panel and bottom triangle. Attitude control and stationkeeping functions are performed by a system of momentum wheels in the bus and four propulsion modules located at the compass points on the periphery of the observatory dish. Each propulsion module has four monopropellant thrusters and six hydrazine arcjets, the latter supported by a nuclear reactor. The total mass of the spacecraft is 22,060 kg.

Jakubowski, Antoni K.↗

Project PARAS: Phased array radio astronomy from space

An orbiting radio telescope is proposed which, when operated in a very long baseline interferometry (VLBI) scheme, would allow higher than currently available angular resolution and dynamic range in the maps and the ability to observe rapidly changing astronomical sources. Using passive phased array technology, the proposed design consists of 656 hexagonal modules forming a 150-m diameter antenna dish. Each observatory module is largely autonomous, having its own photovoltaic power supply and low-noise receiver and processor for phase shifting. The signals received by the modules are channeled via fiber optics to the central control computer in the central bus module. After processing and multiplexing, the data are transmitted to telemetry stations on the ground. The truss frame supporting each observatory panel is a novel hybrid structure consisting of a bottom graphite/epoxy tubular triangle and rigidized inflatable Kevlar tubes connecting the top observatory panel and the bottom triangle. Attitude control and station keeping functions will be performed by a system of momentum wheels in the bus and four propulsion modules located at the compass points on the periphery of the observatory dish. Each propulsion module has four monopropellant thrusters and four hydrazine arcjets, the latter supported by either a photovoltaic array or a radioisotope thermoelectric generator. The total mass of the spacecraft is about 20,500 kg.

Nuss, Kenneth↗

Level density of the sd-nuclei—Statistical shell-model predictions

Accurate knowledge of the nuclear level density is important both from a theoretical viewpoint as a powerful instrument for studying nuclear structure and for numerous applications. For example, astrophysical reactions responsible for the nucleosynthesis in the universe can be understood only if we know the nuclear level density. We use the configuration-interaction nuclear shell model to predict nuclear level density for all nuclei in the sd-shell, both total and for individual spins (only with positive parity). To avoid the diagonalization in large model spaces we use the moments method based on statistical properties of nuclear many-body systems. In the cases where the diagonalization is possible, the results of the moments method practically coincide with those from the shell-model calculations. Using the computed level densities, we fit the parameters of the Constant Temperature phenomenological model, which can be used by practitioners in their studies of nuclear reactions at excitation energies appropriate for the sd-shell nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Weak gravitational lensing by Kerr-MOG black hole and Gauss–Bonnet theorem

Highlights: • The deflection angle of the Kerr-MOG black hole is significantly greater than the original Kerr black hole. • In the future astrophysical observation might shed light on the effects of modified gravity theory. • MOG effect could be taken into account in the gravitational lensing experiments. • Our results put forward that many features of weak gravitational lensing arise from the topological properties of an underlying optical manifold. • For weak gravitational lensing of (at least) spherically symmetric distributions, the Gauss–Bonnet approach holds several advantages over common methods. - Abstract: The deflection angle of Kerr-MOG black holes is studied for different values of the parameter in modified gravity (MOG). To this end, we employ the Gauss–Bonnet theorem, which was first studied by Gibbons and Werner and then extended by Ono, Ishihara and Asada, who use a generalized optical metric where the deflection of light for an observer and source at finite distance. By using this method, we study the weak gravitational lensing by Kerr-MOG black hole. Our computations show that with an increase in the MOG parameter (α), the deflection angle becomes significantly larger than that of Kerr black hole. The results obtained show that MOG effect could be taken into account in the gravitational lensing experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

THE LICK/SDSS LIBRARY. I. SYNTHETIC INDEX DEFINITION AND CALIBRATION

A new synthetic library of spectral feature indices, Lick/Sloan Digital Sky Survey (SDSS), for stellar population studies is presented. Lick/SDSS is computed from synthetic spectra with resolving power R = 1800 to fully exploit the content of the spectroscopic SDSS-DR7 stellar database. The Lick/SDSS system is based on the Lick/IDS one complemented with a UV index in the wavelength region of Ca II H and K lines. The system is well suited to study {alpha}-element abundances in F, G, and K stars. The reliability of synthetic indices in reproducing the behaviors of observational ones with effective temperature, surface gravity, overall metallicity, and {alpha}-element abundances is tested by using empirical stellar libraries (ELODIE, INDO-U.S., and MILES) and the SDSS-DR7 spectroscopic database. The importance of using the same temperature scale in comparing theoretical and observational indices is discussed. The full consistency between Lick/SDSS and observational indices derived from the above mentioned stellar libraries is assessed. The comparison with indices computed from SDSS-DR7 spectra evidences good consistency for 'dwarf' stars and significant disagreement for 'giant' stars due to systematic overestimation of the stellar T {sub eff} by the SEGUE Stellar Parameter Pipeline.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamics of CO in amorphous water-ice environments

The long-timescale behavior of adsorbed carbon monoxide on the surface of amorphous water ice is studied under dense cloud conditions by means of off-lattice, on-the-fly, kinetic Monte Carlo simulations. It is found that the CO mobility is strongly influenced by the morphology of the ice substrate. Nanopores on the surface provide strong binding sites, which can effectively immobilize the adsorbates at low coverage. As the coverage increases, these strong binding sites are gradually occupied leaving a number of admolecules with the ability to diffuse over the surface. Binding energies and the energy barrier for diffusion are extracted for various coverages. Additionally, the mobility of CO is determined from isothermal desorption experiments. Reasonable agreement on the diffusivity of CO is found with the simulations. Analysis of the 2152 cm{sup –1} polar CO band supports the computational findings that the pores in the water ice provide the strongest binding sites and dominate diffusion at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-local thermodynamic equilibrium 1.5D modeling of red giant stars

Spectra for two-dimensional (2D) stars in the 1.5D approximation are created from synthetic spectra of one-dimensional (1D) non-local thermodynamic equilibrium (NLTE) spherical model atmospheres produced by the PHOENIX code. The 1.5D stars have the spatially averaged Rayleigh-Jeans flux of a K3-4 III star while varying the temperature difference between the two 1D component models (ΔT {sub 1.5D}) and the relative surface area covered. Synthetic observable quantities from the 1.5D stars are fitted with quantities from NLTE and local thermodynamic equilibrium (LTE) 1D models to assess the errors in inferred T {sub eff} values from assuming horizontal homogeneity and LTE. Five different quantities are fit to determine the T {sub eff} of the 1.5D stars: UBVRI photometric colors, absolute surface flux spectral energy distributions (SEDs), relative SEDs, continuum normalized spectra, and TiO band profiles. In all cases except the TiO band profiles, the inferred T {sub eff} value increases with increasing ΔT {sub 1.5D}. In all cases, the inferred T {sub eff} value from fitting 1D LTE quantities is higher than from fitting 1D NLTE quantities and is approximately constant as a function of ΔT {sub 1.5D} within each case. The difference between LTE and NLTE for the TiO bands is caused indirectly by the NLTE temperature structure of the upper atmosphere, as the bands are computed in LTE. We conclude that the difference between T {sub eff} values derived from NLTE and LTE modeling is relatively insensitive to the degree of the horizontal inhomogeneity of the star being modeled and largely depends on the observable quantity being fit.

79 ASTRONOMY AND ASTROPHYSICS↗

Distortion of the luminosity function of high-redshift galaxies by gravitational lensing

The observed properties of high-redshift galaxies depend on the underlying foreground distribution of large-scale structure, which distorts their intrinsic properties via gravitational lensing. We focus on the regime where the dominant contribution originates from a single lens and examine the statistics of gravitational lensing by a population of virialized and non-virialized structures using sub-millimeter galaxies at z∼2.6 and Lyman-break galaxies (LBGs) at redshifts z∼6−15 as the background sources. We quantify the effect of lensing on the luminosity function of the high-redshift sources, focusing on the intermediate and small magnifications, μ≲2, which affect the majority of the background galaxies, and comparing to the case of strong lensing. We show that, depending on the intrinsic properties of the background galaxies, gravitational lensing can significantly affect the observed luminosity function even when no obvious strong lenses are present. Finally, we find that in the case of the LBGs it is important to account for the surface brightness profiles of both the foreground and the background galaxies when computing the lensing statistics, which introduces a selection criterion for the background galaxies that can actually be observed. Not taking this criterion into account leads to an overestimation of the number densities of very bright galaxies by nearly two orders of magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗

Chameleon gravity, electrostatics, and kinematics in the outer galaxy

Light scalar fields are expected to arise in theories of high energy physics (such as string theory), and find phenomenological motivations in dark energy, dark matter, or neutrino physics. However, the coupling of light scalar fields to ordinary (or dark) matter is strongly constrained from laboratory, solar system, and astrophysical tests of the fifth force. One way to evade these constraints in dense environments is through the chameleon mechanism, where the field's mass steeply increases with ambient density. Consequently, the chameleonic force is only sourced by a thin shell near the surface of dense objects, which significantly reduces its magnitude. In this paper, we argue that thin-shell conditions are equivalent to ''conducting'' boundary conditions in electrostatics. As an application, we use the analogue of the method of images to calculate the back-reaction (or self-force) of an object around a spherical gravitational source. Using this method, we can explicitly compute the violation of the equivalence principle in the outskirts of galactic haloes (assuming an NFW dark matter profile): Intermediate mass satellites can be slower than their larger/smaller counterparts by as much as 10% close to a thin shell.

79 ASTRONOMY AND ASTROPHYSICS↗

Effective action for the Abelian Higgs model in FLRW

We compute the divergent contributions to the one-loop action of the U(1) Abelian Higgs model. The calculation allows for a Friedmann-Lemaitre-Robertson-Walker space-time and a time-dependent expectation value for the scalar field. Treating the time-dependent masses as two-point interactions, we use the in-in formalism to compute the first, second and third order graphs that contribute quadratic and logarithmic divergences to the effective scalar action. Working in R{sub ξ} gauge we show that the result is gauge invariant upon using the equations of motion.

79 ASTRONOMY AND ASTROPHYSICS↗