Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “approximate computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Thermally induced stresses and deformations in layered composite tubes

The thermally induced stresses and deformations in layered, orthotropic tubes are studied. The motivation for studying tubes is their likely application for use in space structures. Tubes are a strong candidate for this application because of their high structural efficiency, as measured by stiffness per unit weight, and their relative ease of fabrication. Also, tubes have no free edges to deteriorate or delaminate. An anticipated thermal condition for tubes in space is a circumferential temperature gradient. This type of gradient will introduce dimensional changes into the structure and may cause stresses large enough to cause damage to the material. There are potentially large differences in temperatures at different circumferential locations on the tube. Because of this, the effects of temperature dependent material properties on the stresses and deformations may be important. The study is composed of three parts: experiments to determine the functional form of the circumferential gradient and to measure tube deflections; an elasticity solution to compute the stresses and deformations; and an approximate approach to determine the effects of temperature dependent material properties.

Cooper, D. E.↗
NASA NTRS1984

STAEBL: Structural tailoring of engine blades, phase 2

The Structural Tailoring of Engine Blades (STAEBL) program was initiated at NASA Lewis Research Center in 1980 to introduce optimal structural tailoring into the design process for aircraft gas turbine engine blades. The standard procedure for blade design is highly iterative with the engineer directly providing most of the decisions that control the design process. The goal of the STAEBL program has been to develop an automated approach to generate structurally optimal blade designs. The program has evolved as a three-phase effort with the developmental work being performed contractually by Pratt & Whitney Aircraft. Phase 1 was intended as a proof of concept in which two fan blades were structurally tailored to meet a full set of structural design constraints while minimizing DOC+I (direct operating cost plus interest) for a representative aircraft. This phase was successfully completed and was reported in reference 1 and 2. Phase 2 has recently been completed and is the basis for this discussion. During this phase, three tasks were accomplished: (1) a nonproprietary structural tailoring computer code was developed; (2) a dedicated approximate finite-element analysis was developed; and (3) an approximate large-deflection analysis was developed to assess local foreign object damage. Phase 3 is just beginning and is designed to incorporated aerodynamic analyses directly into the structural tailoring system in order to relax current geometric constraints.

Hirschbein, M. S.↗
NASA NTRS1987

Adaptive momentum management for large space structures

Momentum management is discussed for a Large Space Structure (LSS) with the structure selected configuration being the Initial Orbital Configuration (IOC) of the dual keel space station. The external forces considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principle moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight type computer and the method proposed is shown to be effective in the presence of attitude control bandwidths as low as .01 radian/sec.

Hahn, E.↗
NASA NTRS1985

Evaluation of fault-tolerant system performance by approximate techniques

An approximate method for calculating the statistics of the performance of a fault-tolerant system is developed. An approximate method is necessary because the statistical model of the system behavior is large-scale and the time horizon of interest encompasses many cycles of the Redundancy Management logic. In the development, a compact representation of the necessary information called the v-transform is introduced and discussed. Based upon this representation, an approximation that leads to a very efficient computational procedure is suggested and numerically analyzed. A very brief discussion of other related work is also presented.

Walker, B. K.↗
NASA NTRS1987

Adaptive momentum management for the dual keel Space Station

The report discusses momentum management for a large space structure with the structure selected configuration being the Initial Orbital Configuration of the dual-keel Space Station. The external torques considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principal moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight-type computer. The method proposed is shown to be effective in the presence of attitude control bandwidths as low as 0.01 radian/sec.

Hopkins, M.↗
NASA NTRS1988

A diagonally inverted LU implicit multigrid scheme

A new Diagonally Inverted LU Implicit scheme is developed within the framework of the multigrid method for the 3-D unsteady Euler equations. The matrix systems that are to be inverted in the LU scheme are treated by local diagonalizing transformations that decouple them into systems of scalar equations. Unlike the Diagonalized ADI method, the time accuracy of the LU scheme is not reduced since the diagonalization procedure does not destroy time conservation. Even more importantly, this diagonalization significantly reduces the computational effort required to solve the LU approximation and therefore transforms it into a more efficient method of numerically solving the 3-D Euler equations.

Yokota, Jeffrey W.↗
NASA NTRS1988

A diagonally inverted LU implicit multigrid scheme

A new Diagonally Inverted LU Implicit scheme is developed within the framework of the multigrid method for the three-dimensional unsteady Euler equations. The matrix systems that are to be inverted in the LU scheme are treated by local diagonalizing transformations that decouple them into systems of scalar equations. Unlike the Diagonalized ADI method, the time accuracy of the LU scheme is not reduced since the diagonalizing procedure does not destroy time conservation. Even more importantly, this diagonalization significantly reduces the computational effort required to solve the LU approximation and therefore transforms it into a more efficient method of numerically solving the three-dimensional Euler equations.

Yokota, J. W.↗
NASA NTRS1989

Thickening oscillation of a delta wing using Navier-Stokes and Navier-displacement equations

The problem of unsteady, supersonic, locally conical, vortical flow around a delta wing undergoing thickening oscillation is solved using the unsteady, thin-layer Navier-Stokes equations and the unsteady linearized Navier-displacement equations. The unsteady, thin-layer Navier-Stokes equations are solved using the implicit approximate-factorization finite-volume scheme to compute the conservative components of the flow vector field. With the conservative components known at any time step, the linearized, Navier-displacement equations are solved using the alternating, direction-implicit scheme to obtain the grid points displacements due to known displacement boundary conditions. A grid-displacements limiter, in the form of a low mesh Reynolds number, is used to limit grid-folding in regions of highly reversed flow.

Chuang, Hsin-Kung A.↗
NASA NTRS1989

Two-target game model of an air combat with fire-and-forget all-aspect missiles

An air combat duel between similar aggressive fighter aircraft, both equipped with the same type of guided missiles, is formulated as a two-target differential game using the dynamic model of the game of two identical cars. Each of the identical target sets represents the effective firing envelope of an all-aspect fire-and-forget air-to-air missile. The firing range limits depend on the target aspect angle and are approximated by analytical functions. The maximum range, computed by taking into account the optimal missile avoidance maneuver of the target, determines the no-escape firing envelope. The solution consists of the decomposition of the game space into four regions: the respective winning zones of the two opponents, the draw zone, and the region where the game terminates by a mutual kill. The solution provides a new insight for future air combat analysis.

Davidovitz, A.↗
NASA NTRS1989

Comparison of theoretical and measured brightness temperature of a soybean canopy

A model for the brightness temperature of a canopy which is based on the physical characteristics of the vegetation is being developed. This model uses the Peake model to relate the scattering coefficient of the vegetation to its radiometric brightness temperature and a discrete scattering model to computer the scattering coefficient. A distorted Born approximation is used to provide a tractable solution to the scattering problem. To verify the theory a comparison has been made with experiments. Radiometric measurements of brightness temperature were made at L- and C-bands over a crop of mature soybeans, along with ground truth measurements. All model input parameters were measured; there were no free parameters to adjust to obtain agreement with the measurements. Results showed that agreement between theory and measurements was reasonable for horizontal polarization at both L- and C-bands with dry underlying soil.

Lang, R. H.↗
NASA NTRS1989

Construction of surface pressure field from scatterometer wind field

An account of the construction of surface pressure fields from Seasat-A satellite scatterometer (SASS) winds as carried out by different methods, and the comparison of these pressure fields with those derived from in situ ship observations is presented. On the assumption that the pressure adjusts itself instantaneously to the motion field, it may be computed by various methods. One of these makes use of planetary boundary theory, and of the possible techniques in this category a two-layer iterative scheme admitting of the parametrization of diabatic and baroclinic effects and of secondary flow was chosen. A second method involves the assumption of zero two-dimensional divergence, leading to a Laplace's equation (the balance equation) in pressure, with the wind field serving as a forcing function. This method does not accommodate adiabatic or baroclinic effects, and requires a knowledge of the pressure at all boundary points. Two comparison fields are used for validation: the conventional operational analyses of the US National Meteorological Center (NMC), and the special analyses of the Gulf of Alaska Experiment (GOASEX), which were done by hand. The results of the computations were as follows: (1) The pressure fields, as computed from the SASS winds alone, closely approximated the NMC fields in regions where reasonable in situ coverage was available (typically, one or two mb differences over most of the chart, three to four mb in extreme cases); (2) In some cases the SASS-derived pressure fields displayed high-resolution phenomena not detected by the NMC fields, but evident in the GOASEX data; and, (3) As expected, the pressure fields derived from the balance equation were much smoother and less well resolved than the SASS-derived or NMC fields. The divergence as measured from the SASS winds is smaller than, but of the same order of magnitude as, the vorticity.

Wurtele, Morton G.↗
NASA NTRS1990

A new treatment of the albedo radiation pressure in the case of a uniform albedo and of a spherical satellite

The purpose of this paper is to present a model for the radiation pressure acceleration of a spherical satellite, due to the radiation reflected by a planet with a uniform albedo. A particular choice of variables allows one to reduce the surface integrals over the lit portion of the planet visible to the satellite to one-dimensional integrals. Exact analytical expressions are found for the integrals corresponding to the case where the spacecraft does not 'see' the terminator. The other integrals can be computer either numerically, or analytical in an approximate form. The results are compared with those of Lochry (1966). The model is applied to Magellan, a spacecraft orbiting Venus.

Borderies, Nicole↗
NASA NTRS1991

Frame Shift/warp Compensation for the ARID Robot System

The Automatic Radiator Inspection Device (ARID) is a system aimed at automating the tedious task of inspecting orbiter radiator panels. The ARID must have the ability to aim a camera accurately at the desired inspection points, which are in the order of 13,000. The ideal inspection points are known; however, the panel may be relocated due to inaccurate parking and warpage. A method of determining the mathematical description of a translated as well as a warped surface by accurate measurement of only a few points on this surface is developed here. The method uses a linear warp model whose effect is superimposed on the rigid body translation. Due to the angles involved, small angle approximations are possible, which greatly reduces the computational complexity. Given an accurate linear warp model, all the desired translation and warp parameters can be obtained by knowledge of the ideal locations of four fiducial points and the corresponding measurements of these points on the actual radiator surface. The method uses three of the fiducials to define a plane and the fourth to define the warp. Given this information, it is possible to determine a transformation that will enable the ARID system to translate any desired inspection point on the ideal surface to its corresponding value on the actual surface.

Latino, Carl D.↗
NASA NTRS1993

Reduction method with system analysis for multiobjective optimization-based design

An approach for reducing the number of variables and constraints, which is combined with System Analysis Equations (SAE), for multiobjective optimization-based design is presented. In order to develop a simplified analysis model, the SAE is computed outside an optimization loop and then approximated for use by an operator. Two examples are presented to demonstrate the approach.

Azarm, S.↗
NASA NTRS1992

Convection treatment for high Rayleigh number, laminar, natural convection calculation

The problem of natural convection in a square cavity of a Boussinesq incompressible fluid is computed using a consistent central-difference approximation, a consistent second-order upwind scheme, and the hybrid scheme for the energy equation. It was found that, for this problem, the second-order upwind scheme yields satisfactory solutions and that an apparently low-order combination of schemes, with the second-order upwind scheme for the momentum equations and the hybrid scheme for the energy equation, can produce satisfactory predictions for this problem.

Shyy, Wei↗
NASA NTRS1993

Raman linewidths and rotationally inelastic collision rates in nitrogen

Using the N2-N2 interaction potential of van der Avoird et al. (1986) rotationally inelastic collision cross sections have been computed within the infinite order sudden (IOS) approximation, assuming the molecules are distinguishable. Methods for enforcing detailed balance and correcting for effects of inelasticity, which are ignored in the IOS approximation, are considered, including the energy corrected sudden (ECS) method. Suitably averaged cross sections are compared with experimental Raman Q-branch linewidths for temperatures from 295 to 1500 K and with recently measured room temperature state-to-state rates. Agreement is rather good, especially if ECS corrections are applied.

Green, Sheldon↗
NASA NTRS1936

Air Flow in a Separating Laminar Boundary Layer

The speed distribution in a laminar boundary layer on the surface of an elliptic cylinder, of major and minor axes 11.78 and 3.98 inches, respectively, has been determined by means of a hot-wire anemometer. The direction of the impinging air stream was parallel to the major axis. Special attention was given to the region of separation and to the exact location of the point of separation. An approximate method, developed by K. Pohlhausen for computing the speed distribution, the thickness of the layer, and the point of separation, is described in detail; and speed-distribution curves calculated by this method are presented for comparison with experiment.

Schubauer, G B↗
NASA NTRS1994

On automating domain connectivity for overset grids

An alternative method for domain connectivity among systems of overset grids is presented. Reference uniform Cartesian systems of points are used to achieve highly efficient domain connectivity, and form the basis for a future fully automated system. The Cartesian systems are used to approximated body surfaces and to map the computational space of component grids. By exploiting the characteristics of Cartesian Systems, Chimera type hole-cutting and identification of donor elements for intergrid boundary points can be carried out very efficiently. The method is tested for a range of geometrically complex multiple-body overset grid systems.

Chiu, Ing-Tsau↗