Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZIRCONIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

High Temperature Oxidation of Silicon Carbide and Advanced Iron-Based Alloys in Steam-Hydrogen Environments

A side by side comparison of the oxidation behavior of zirconium alloys with SiC materials and advanced iron-based alloys is provided. Oxidation tests were conducted in steam and steam-hydrogen environments at 800-1350 C and 0.34-2MPa for durations up to 48 hours. Monolithic SiC specimens as well as SiC/SiC composites were examined during the study where the material recession mechanism appeared to be governed by silica layer volatilization at the surface for CVD SiC. A wide set of austenitic and ferritic steels were also examined where a critical Cr content (>20 wt.%) was shown to be necessary to achieve oxidation resistance at high temperatures. SiC materials and alumina-forming ferritic steels exhibited slowest oxidation kinetics; roughly two orders of magnitude lower than zirconium alloys.

Terrani, Kurt A↗

Oven rack having integral lubricious, dry porcelain surface

A lubricious glass-coated metal cooking article capable of withstanding repeated heating and cooling between room temperature and at least 500.degree. F. without chipping or cracking the glass coating, wherein the glass coating includes about 0.1 to about 20% by weight of a homogeneously distributed dry refractory lubricant material having a particle size less than about 200 .mu.m. The lubricant material is selected from the group consisting of carbon; graphite; boron nitride; cubic boron nitride; molybdenum (FV) sulfide; molybdenum sulfide; molybdenum (IV) selenide; molybdenum selenide, tungsten (IV) sulfide; tungsten disulfide; tungsten sulfide; silicon nitride (Si.sub.3N.sub.4); TiN; TiC; TiCN; TiO.sub.2; TiAlN; CrN; SiC; diamond-like carbon; tungsten carbide (WC); zirconium oxide (ZrO.sub.2); zirconium oxide and 0.1 to 40 weight % aluminum oxide; alumina-zirconia; antimony; antimony oxide; antimony trioxide; and mixtures thereof.

01 COAL, LIGNITE, AND PEAT↗

Metaloxide--ZrO2 catalysts for the esterification and transesterification of free fatty acids and triglycerides to obtain bio-diesel

Mixed metal oxide catalysts (ZnO, CeO, La2O3, NiO, Al203, SiO2, TiO2, Nd2O3, Yb2O3, or any combination of these) supported on zirconia (ZrO2) or hydrous zirconia are provided. These mixed metal oxide catalysts can be prepared via coprecipitation, impregnation, or sol-gel methods from metal salt precursors with/without a Zirconium salt precursor. Metal oxides/ZrO2 catalyzes both esterification and transesterification of oil containing free fatty acids in one batch or in single stage. In particular, these mixed metal oxides supported or added on zirconium oxide exhibit good activity and selectivity for esterification and transesterification. The low acid strength of this catalyst can avoid undesirable side reaction such as alcohol dehydration or cracking of fatty acids. Metal oxides/ZrO2 catalysts are not sensitive to any water generated from esterification. Thus, esterification does not require a water free condition or the presence of excess methanol to occur when using the mixed metal oxide catalyst. The FAME yield obtained with metal oxides/ZrO2 is higher than that obtained with homogeneous sulfuric acid catalyst. Metal oxides/ZrO2 catalasts can be prepared as strong pellets and in various shapes for use directly in a flow reactor. Furthermore, the pellet has a strong resistance toward dissolution to aqueous or oil phases.

36 MATERIALS SCIENCE↗

PLZT capacitor and method to increase the dielectric constant

A ceramic-capacitor includes a first electrically-conductive-layer, a second electrically-conductive-layer arranged proximate to the first electrically-conductive-layer, and a dielectric-layer interposed between the first electrically-conductive-layer and the second electrically-conductive-layer. The dielectric-layer is formed of a lead-lanthanum-zirconium-titanate material (PLZT), wherein the PLZT is characterized by a dielectric-constant greater than 125, when measured at 25 degrees Celsius and zero Volts bias, and an excitation frequency of ten-thousand Hertz (10 kHz). A method for increasing a dielectric constant of the lead-lanthanum-zirconium-titanate material (PLZT) includes the steps of depositing PLZT to form a dielectric-layer of a ceramic-capacitor, and heating the ceramic-capacitor to a temperature not greater than 300.degree. C.

36 MATERIALS SCIENCE↗

ORNL Neutron Cross-Section Measurements in the Resolved Resonance Range for the NCSP

Nuclear criticality simulations test the quality and the consistency of the existing nuclear evaluated data libraries such as ENDF/B, JEFF, or JENDL. In some cases, the cross-section evaluations of those libraries are found insufficient to describe accurately criticality benchmarks. The US Nuclear Criticality Safety Program (NCSP) collaborates with the Joint Research Center (JRC) in Geel, Belgium, to perform high-resolution neutron-induced cross section measurements at the Geel Linear Accelerator (GELINA) to resolve deficiencies in nuclear data that have been emerging in criticality calculations. Problems with nuclear data include insufficient neutron energy range, missing covariances, and problems with previous experiments. For example, the use of the ENDF/B-VII.1 neutron cross section data for vanadium, cerium and zirconium in nuclear criticality safety calculations shows discrepancies between benchmark calculations measurements and demonstrates the need for reliable covariance data. For new covariances of existing data, a reevaluation of the old cross section data is needed. However, these data are in many cases no longer available. This deficit can be overcome only by obtaining new experimental data to serve as the basis of a new evaluation. Recent measurements were made of the neutron total and capture cross sections of natural vanadium and natural zirconium in the neutron energy range from 100 eV to several hundred keV. These measured data will be used to improve representation of the cross sections since most of the available evaluated data rely on old measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High conductivity NASICON electrolyte for room temperature solid-state sodium ion batteries

Solid electrolytes compositions, methods of making the solid electrolytes, and methods of using the solid electrolytes in batteries and other electrochemical technologies are disclosed. The method of producing a solid electrolyte comprises (a) ball milling Na2CO3, SiO2, NH4H2PO4, a zirconium source, and a dopant to produce a ball milled powder; (b) calcining the ball milled powder to produce a calcined powder; and (c) sintering the calcined powder to produce a solid electrolyte. The zirconium source for the solid electrolyte may be ZrO2. The dopant for the solid electrolyte may be AI2O3, Fe2O3, Sb2O3, Yb2O3, or Dy2O3.

25 ENERGY STORAGE↗

Exhaust treatment catalysts with enhanced hydrothermal stability and low-temperature activity

A catalyst for treating fuel combustion exhaust, the catalyst comprising the following components: (i) an oxide support comprising silicon oxide, aluminum oxide, or combination of silicon and aluminum oxides; (ii) cerium oxide, zirconium oxide, or a combination of cerium and zirconium oxides in contact with said oxide support; and (iii) nanoparticles comprising elemental palladium or platinum in contact with at least component (ii), wherein said palladium or platinum is present in an amount of 0.1-4 wt. % by weight of the particles, and wherein surfaces of said nanoparticles of elemental palladium or palladium are exposed and accessible to said fuel combustion exhaust. Methods of producing and using the catalyst are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduced Diameter and Lined Cladding Production Status

A contract has been placed with Century Tube Inc. to produce cladding for the FAST experiment. Excess EBR II cladding tubes will be cold drawn down to 0.115 in. diameter × 0.009 in. wall and 0.077 in. × 0.006 in. wall. Lined cladding will also be tested in the FAST experiment. Century Tube will produce several samples, varying assembly the assembly process, with solid zirconium or vanadium rods inside of the HT9. Cladding/liner bonding of each will be evaluated using microscopy. The best one will be further processed to form a liner tube within the cladding. A shrink fit approach is also being developed, where a solid zirconium or vanadium bar is shrunk fit into a cladding piece. This process has shown favorable results and will be compared against the co drawn samples when available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Titanium-group nano-whiskers and method of production

Disclosed herein are structures comprising a titanium, zirconium, or hafnium powder particle with titanium carbide, zirconium carbide, or hafnium carbide (respectively) nano-whiskers grown directly from and anchored to the powder particle. Also disclosed are methods for fabrication of such structures, involving heating the powder particles and exposing the particles to an organic gas.

Seals, Roland D.↗

PLN-6268 Yttrium Hydride Post Irradiation Examination Plan

The overarching goal of the Department of Energy Office of Nuclear Energy (DOE-NE) microreactor program is to develop technologies for the deployment of civilian microreactors by stakeholders1. Microreactors are expressed as advanced transportable nuclear reactors operating at low power (<20MWth) but high temperatures (>600°C), as well as plug-and-play and inherently safe designs. One prerequisite of a microreactor is the compactness, so that a truck can transport the reactor under safe conditions with the current road infrastructure1,2. The compactness of these reactors likely can be attainable by use of solid components for the essentials of the nuclear core, such as fuel, core heat removal components, reflectors, and moderators. Among these essentials, where fuel enrichment must remain < 20% to meet High Assay Low Enrichment Uranium criteria (HALEU), the largest contribution to the compactness is offered by use of solid moderators which benefit from light atomic weight elements, such as hydrogen, carbon, and beryllium2. Among these, hydrogen-bearing materials, such as metal hydrides, are superior to other options from the lowest critical mass standpoint. Noting that, factors other than critical mass should be considered for a specific reactor design. Yttrium- or zirconium-based metal hydrides have been down-selected due to their neutronic performance. In addition to the neutronic perspective, maintaining hydrogen within the metal hydride is important at the high operating temperatures proposed by advanced reactors. Yttrium hydride (YHx) is, therefore, a proposed moderator material that offers better hydrogen retention at higher operating temperatures than zirconium hydrides due to higher retention and thermal stability of hydrogen in the metal3. The irradiated materials properties of metal hydrides, in this case YHx, must be assessed for the qualification of these moderators. Material testing and inspection processes must illustrate that the effects of dimensional and property changes on thermophysical and mechanical properties do not cause any significant changes on the microreactor safety, and the moderating power is maintained within design limits. Thus, the effect of irradiation on the thermophysical and mechanical properties must be determined. This post-irradiation examination (PIE) plan specifically aims to determine these properties for YHx following Advanced Test Reactor (ATR) irradiation.

99 GENERAL AND MISCELLANEOUS↗

Transition metal-based materials for use in high temperature and corrosive environments

A material (e.g., an alloy) comprises molybdenum, rhenium, and at least one element selected from the group consisting of tellurium, iodine, selenium, chromium, nickel, copper, titanium, zirconium, tungsten, vanadium, and niobium. Methods of forming the material (e.g., the alloy) comprise mixing molybdenum powder, rhenium powder, and a powder comprising at least one element selected from the group consisting of tellurium, iodine, selenium, chromium, nickel, copper, titanium, zirconium, tungsten, vanadium, and niobium. The mixed powders may be coalesced to form the material (e.g., the alloy).

Tripathy, Prabhat K.↗

Control rods for light water reactors

A control rod for a nuclear fuel assembly is described herein that includes a neutron absorbing material having a melting point greater than 1500° C. that does not form a eutectic with a melting point less than 1500° C., and may further include a cladding material having a melting point greater than 1500° C. The cladding material is selected from the group consisting of silicon carbide, zirconium, a zirconium alloy, tungsten, and molybdenum. The absorbing material is selected from the group consisting of Gd2O3, Ir, B4C, Re, and Hf. The metal cladding or the absorbing material may be coated with an anti-oxidation coating of Cr with or without a Nb intermediate layer.

Lahoda, Edward J.↗

A review of cladding failure thresholds in RIA conditions based on transient reactor test data and the need for continued testing

Transient reactor experiments on light water reactor (LWR) fuel pins had been conducted since the beginning of the nuclear era to help determine core coolability and cladding failure thresholds. During one such test in November of 1993 at the CABRI transient test reactor on a test involving a high burnup fuel rod with a corroded Zircaloy-4 cladding it was first observed that cladding failures could occur prior to a departure from nucleate boiling (pre-DNB) at lower-than-expected peak radial average enthalpies. Thirteen additional tests would be performed in the CABRI reactor over the next decade on fuel rods with higher burnups [1]. Additionally, a larger testing program at the NSRR reactor in Japan with high burnup fuel would uncover a similar trend of pre-DNB ruptures in high burnup test rods at lower-than-expected peak enthalpies [2]. Numerous out of pile testing programs involving a variety of innovative mechanical testing techniques have been employed in an attempt to better quantify the failure thresholds of corroded zirconium alloy cladding in these rapid heating and loading conditions [3][4][5]. While previously interim guidance had been issued, in June of 2020 the NRC officially published updated regulatory guidance to account of these pre-DNB failures in Regulatory Guide 1.236 [6]. This paper will present an independent review of the publicly available transient reactor test database on higher burnup LWR pins conducted at the CABRI and NSRR reactors as well as review of a selection of published out of pile mechanical testing methods. The purpose of the review is to determine how well the new regulatory limits are supported by experimental data. The review will identify if additional transient reactor tests could provide additional support for the NRC guidance or identify the need for revisions. The evaluation will consider how far the existing database can be extrapolated when considering low hydrogen zirconium alloy claddings (with and without protective coatings) containing very high burnup (> 70 MWd/kgU) UO2 fuel pellets. Finally, the authors will suggest how out of pile mechanical tests can be used in conjunction with a limited number of transient reactor tests to develop cladding specific failure thresholds in RIA type transients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Titanium-group nano-whiskers and method of production

Disclosed herein are structures comprising a titanium, zirconium, or hafnium powder particle with titanium carbide, zirconium carbide, or hafnium carbide (respectively) nano-whiskers grown directly from and anchored to the powder particle. Also disclosed are methods for fabrication of such structures, involving heating the powder particles and exposing the particles to an organic gas.

Menchhofer, Paul A.↗

Autoclave Corrosion Experiment of Zircaloy-4 at Temperatures Between 180 deg. C and 270 deg. C - 19167

Corrosion of zirconium alloys is a key issue for the overall nuclear industry that has been studied under various temperatures for plant operation, severe accidents, storage, and final disposal of spent cladding. The present work aims to investigate the corrosion kinetics of zirconium alloys at intermediate temperature regions between the operation and storage/disposal conditions, to examine if the extrapolation of high temperature data to lower temperatures is valid. To achieve this, an autoclave experiment, which is a common way to study corrosion behavior, was applied for up to 485 days at 4 different temperatures: 180 deg. C, 210 deg. C, 240 deg. C and 270 deg. C. The weight gain changes due to the oxide growth of the PWR cladding tube (Zircaloy-4) showed that the corrosion kinetics in temperatures above 210 deg. C follow the cubic rate law. The activation energy evaluated by the Arrhenius relationship of the cubic rate constants was determined and found to be 132.8 ± 0.6 kJ/mol, which corresponds to that generally reported under the operation temperatures. However, the kinetics at 180 deg. C was found to be close to the parabolic rate law, which suggests the kinetics changes from cubic to parabolic around 200 deg. C. Thus, it is unlikely to predict accurately long-term corrosion behavior under storage and disposal conditions by simply extrapolating the high temperature corrosion data. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Temperature on Electrochemical Properties of Zircaloy-4 by AC Impedance Spectroscopy - 19305

The evaluation of waterside corrosion behavior of zirconium alloys in the disposal environment is considerable subject. The geological disposal environment is considered as 'low temperature' about 30 deg. C - 80 deg. C, which corrosion rate of Zircaloy-4 is very slow. On the other hand, at the 'high temperature' during normal operation temperature of commercial reactors around 300 deg. C, rich studies about out-of-pile waterside corrosion rate of zirconium alloys have been accumulated by the analyzing weight gain or oxide thickness obtained as a result of the autoclave test because of evaluable corrosion rate. There, in the intermediate temperature - 120 deg. C, 150 deg. C, and 180 deg. C - between low temperature and high temperature, in order to simulate the early stage of corrosion, Zircaloy-4 oxide films with thickness of 10 nm and 30 nm were formed, and the evaluations about the properties of the oxide films were tried by AC impedance spectroscopy. As the result, it is suggested that a dense oxide film which has resistance against corrosion may be formed with a lower corrosion temperature. And also, since the measurement of weight gain with corrosion has been considered as the main method for evaluation of corrosion, AC impedance spectroscopy for Zircaloy-4 is suggested to an effective method for in-situ measurement of property and thickness of Zircaloy-4 oxide film. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enrichment Penalty for Molybdenum Cladded Accident Tolerant Fuel

A tri-layered fuel cladding has been proposed as an enhanced accident tolerant fuel (EATF) design. The EATF cladding has an inner layer of zirconium alloy, a layer of molybdenum, and an outer layer of zirconium alloy. Due to its high melting point, high temperature creep resistance, and improved resistance to steam corrosion, the molybdenum layer will better tolerate a loss of active coolant accident than the standard single layer zircaloy cladding currently in use. The addition of the molybdenum layer to the cladding, however, has a deleterious effect on the fuel management due to the high thermal neutron capture cross section of Mo{sup 95}. This negative reactivity effect must be counterpoised by increasing the fuel enrichment in order to maintain a constant cycle length. This work presents a prima facie quantification of the enrichment increase required to maintain cycle length for a standard PWR 3 x 18 month cycle. The quantification of the required enrichment increase is necessary in order for a more thorough financial analysis to be performed for the prospective new fuel design. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗