Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Temperature modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Plasma distribution and spacecraft charging modeling near Jupiter

To assess the role of spacecraft charging near Jupiter, the plasma distribution in Jupiter's magnetosphere was modeled using data from the plasma analyzer experiments on Pioneer 10 (published results) and on Pioneer 11 (preliminary results). In the model, electron temperatures are kT = 4 eV throughout, whereas proton temperatures range over 100 or equal to kT or equal to 400 eV. The model fluxes and concentrations vary over three orders of magnitude among several corotating regions, including, in order to increasing distance from Jupiter, a plasma void, plasma sphere, sporadic zone, ring current, current sheet, high latitude plasma and magnetosheath. Intermediate and high energy electrons and protons (to 100 MeV) are modeled as well. The models supply the information for calculating particle fluxes to a spacecraft in the Jovian environment. The particle balance equations (including effects of secondary and photoemission) then determine the spacecraft potential.

Goldstein, R.↗

X-ray emission lines from three Galactic bulge sources

X-ray spectroscopic observations obtained with the Einstein objective grating spectrometer (OGS) and monitor proportional counter (MPC) instruments of three Galactic bulge sources, the globular cluster burst source 1820-30, the burster Serpens X-1, and the GX 9+9 are presented. Joint spectral fits to the OGS and MPC data are consistent for all three sources with either a thermal bremsstrahlung model with temperature ranging from 6 to 10 keV or with a two-component blackbody model, where one component may be associated with the neutron star and one with the accretion disk. The spectra of Serpens X-1 and 1820-30 harden with increases in intensity. The implications of the results for recent models of low-mass X-ray binaries are discussed.

Vrtilek, S. D.↗

The disks of T Tauri stars with flat infrared spectra

The energy distributions of T Tauri stars with flat infrared spectra is modeled by assuming that they have spatially thin disks with unorthodox radial gradients of temperature. Derived model parameters show that the disks associated with the flat-spectrum sources must contain intrinsic luminosity in addition to the energy intercepted and reprocessed from the central star, i.e., the disks must be active. Self-gravity may provide a possible source for this activity.

Adams, Fred C.↗

Comparison of remote measurements of infrared surface temperatures and microwave soil moisture

Scatterometric measurements of active microwave soil water content and radiometric measurements of thermal IR surface temperatures were made simultaneously fron an aircraft flying 400 m over an agricultural region of France after harvesting. The surface temperatures were used to deterine soil moisture availability estimates according to the Carlson (1986) model. Surface temperature or soil moisture availability and microwave soil moisture were correlated. The standard error in the IR temperature and soil moisture availability due to influences other than soil moisture is found to be + or - 2 C. The standard deviation of the temperature/moisture availability is greater than this standard error. It is shown that correlations between soil water content and moisture availability improve with increasing spatial or temporal variance in the measure surface temperatures.

Perry, Eileen M.↗

In-phase and out-of-phase axial-torsional fatigue behavior of Haynes 188 at 760 C

Isothermal, in-phase and out-of-phase axial-torsional fatigue experiments have been conducted at 760 C on uniform gage section, thin-walled tubular specimens of a wrought cobalt-base superalloy, Haynes 188. Test-control and data acquisition were accomplished with a minicomputer. Fatigue lives of the in- and out-of-phase axial-torsional fatigue tests have been estimated with four different multiaxial fatigue life prediction models that were developed primarly for predicting axial-torsional fatigue lives at room temperature. The models investigated were: (1) the von Mises equivalent strain range; (2) the Modified Multiaxiality Factor Approach; (3) the Modified Smith-Watson-Topper Parameter; and (4) the critical shear plane method of Fatemi, Socie, and Kurath. In general, life predictions by the von Mises equivalent strain range model were within a factor of 2 for a majority of the tests and the predictions by the Modified Multiaxiality Factor Approach were within a factor of 2, while predictions of the Modified Smith-Watson-Topper Parameter and of the critical shear plane method of Fatemi, Socie, and Kurath were unconservative and conservative, respectively, by up to factors of 4. In some of the specimens tested under combined axial-torsional loading conditions, fatigue cracks initiated near extensometer indentations. Two design modifications have been proposed to the thin-walled tubular specimen to overcome this problem.

Kalluri, Sreeramesh↗

THE ORIGIN OF THE HOT GAS IN THE GALACTIC HALO: CONFRONTING MODELS WITH XMM-NEWTON OBSERVATIONS

We compare the predictions of three physical models for the origin of the hot halo gas with the observed halo X-ray emission, derived from 26 high-latitude XMM-Newton observations of the soft X-ray background between l = 120{sup 0} and l = 240{sup 0}. These observations were chosen from a much larger set of observations as they are expected to be the least contaminated by solar wind charge exchange emission. We characterize the halo emission in the XMM-Newton band with a single-temperature plasma model. We find that the observed halo temperature is fairly constant across the sky ({approx}(1.8-2.4) x 10{sup 6} K), whereas the halo emission measure varies by an order of magnitude ({approx}0.0005-0.006 cm{sup -6} pc). When we compare our observations with the model predictions, we find that most of the hot gas observed with XMM-Newton does not reside in isolated extraplanar supernova (SN) remnants-this model predicts emission an order of magnitude too faint. A model of an SN-driven interstellar medium, including the flow of hot gas from the disk into the halo in a galactic fountain, gives good agreement with the observed 0.4-2.0 keV surface brightness. This model overpredicts the halo X-ray temperature by a factor of {approx}2, but there are a several possible explanations for this discrepancy. We therefore conclude that a major (possibly dominant) contributor to the halo X-ray emission observed with XMM-Newton is a fountain of hot gas driven into the halo by disk SNe. However, we cannot rule out the possibility that the extended hot halo of accreted material predicted by disk galaxy formation models also contributes to the emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Unified one-dimensional model of bounded plasma with nonzero ion temperature in a broad pressure range

A one-dimensional model for steady state plasmas bounded either between large parallel walls, or by a cylinder or a sphere, valid in a wide range of gas pressures, is considered. The model includes nonzero ion temperature, inertial terms in the ion momentum equations, and allows one to calculate the plasma electron temperature and ion current density reaching the wall, as well as the spatial distributions of the ion fluid velocity, plasma density, and plasma potential in the plasma bulk. In addition, the effect of electron inertia is analyzed. The model includes as particular cases several earlier models that were based on a similar set of differential equations, but that are restricted to a specific pressure regime (low, intermediate, or high). Analytical solution is found in planar geometry, and numerical solution is given in cylindrical and spherical geometry. The results obtained are compared with those of earlier models and the differences are analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using regime analysis to identify the contribution of clouds to surface temperature errors in weather and climate models

Many global circulation models (GCMs) exhibit a persistent bias in the 2 m temperature over the midlatitude continents, present in short-range forecasts as well as long-term climate simulations. A number of hypotheses have been proposed, revolving around deficiencies in the soil–vegetation–atmosphere energy exchange, poorly resolved low-level boundary-layer clouds or misrepresentations of deep-convective storms. A common approach to evaluating model biases focuses on the model-mean state. However, this makes difficult an unambiguous interpretation of the origins of a bias, given that biases are the result of the superposition of impacts of clouds and land-surface deficiencies over multiple time steps. This article presents a new methodology to objectively detect the role of clouds in the creation of a surface warm bias. A unique feature of this study is its focus on temperature-error growth at the time-step level. It is shown that compositing the temperature-error growth by the coinciding bias in total downwelling radiation provides unambiguous evidence for the role that clouds play in the creation of the surface warm bias during certain portions of the day. Furthermore, the application of an objective cloud-regime classification allows for the detection of the specific cloud regimes that matter most for the creation of the bias. We applied this method to two state-of-the-art GCMs that exhibit a distinct warm bias over the Southern Great Plains of the USA. Our analysis highlights that, in one GCM, biases in deep-convective and low-level clouds contribute most to the temperature-error growth in the afternoon and evening respectively. In the second GCM, deep clouds persist too long in the evening, leading to a growth of the temperature bias. In conclusion, the reduction of the temperature bias in both models in the morning and the growth of the bias in the second GCM in the afternoon could not be assigned to a cloud issue, but are more likely caused by a land-surface deficiency.

54 ENVIRONMENTAL SCIENCES↗

A Markov model for X-band atmospheric antenna-noise temperatures

A five-state Markov model is suggested for the X-band antenna-noise temperatures based on data collected at Goldstone. The states of the model are determined by changes in the cloud and rain condition of the atmosphere so as to take advantage of the correlation observed between the antenna temperatures and changes in rain rates. Then an indication is given of how to obtain the estimates of the parameters of the model from the data.

Adeyemi, O. H.↗

HEAO 1 A-2 low-energy detector X-ray spectra of the Lupus Loop and SN 1006

The Lupus Loop and SN 1006 were observed by the A-2 low-energy detector proportional counters on the HEAO 1 satellite as part of the all-sky survey. As a result of a major advance in understanding of detector response and background accurate analysis of the data has become possible. Soft X-ray spectra for both supernova remnants were constructed from the PHA data taken during the scanning observations. Single-temperature and two-temperature Raymond-Smith models were fitted to the observed spectra. In addition, power-law and power-law plus one-temperature models were fitted to the spectrum of SN 1006. Only two-component models provide an adequate description for both Lupus Loop and SN 1006 spectra. The temperatures, column densities, and emission measures are significantly more accurate than previous results.

Leahy, D. A.↗

Thermal Pollution Mathematical Model: Verification of Three-Dimensional Free-Surface Model at Anclote Anchorage - Volume 6

The free-surface model presented is for tidal estuaries and coastal regions where ambient tidal forces play an important role in the dispersal of heated water. The model is time dependent, three dimensional, and can handle irregular bottom topography. The vertical stretching coordinate is adopted for better treatment of kinematic condition at the water surface. The results include surface elevation, velocity, and temperature. The model was verified at the Anclote Anchorage site of Florida Power Company. Two data bases at four tidal stages for winter and summer conditions were used to verify the model. Differences between measured and predicted temperatures are on an average of less than 1 C.

Lee, S. S.↗

Steady-state temperature distribution in living tissue modeled as cylindrical shells.

Closed form, analytical solutions to the problem of steady-state heat transfer in living tissue modeled as cylindrical shells are presented and discussed. These solutions are particularly useful for the study of temperature distributions in the extremities. Metabolic heat generation, conduction, and heat transported by the blood perfusing the tissue are considered in the model. The results demonstrate the important role that the blood stream plays in the transfer of heat inside living tissue. Solutions are also presented for the limiting cases of diminishing blood flow that would occur during vasoconstriction or occlusion of blood by external means.

Shitzer, A.↗

Solid state convection models of the lunar internal temperature

Lunar temperature profiles and their dependences on the viscosity of the lunar interior are calculated numerically for models that include finite-amplitude solid-state convective cooling. Cooling by subsolidus creep and the rheological behavior of geologic material are taken into account. It is found that the deep lunar temperature is about 1500 to 1600 K with an effective viscosity of between 10 to the 21st and 10 to the 22nd power sq cm/sec. The results are compared with lunar heat-flux measurements, seismic observations, and electrical-conductivity determinations.

Schubert, G.↗

Optimal laser wavelength for efficient laser power converter operation over temperature

A temperature dependent modeling study is conducted on a GaAs laser power converter to identify the optimal incident laser wavelength for optical power transmission. Furthermore, the respective temperature dependent maximal conversion efficiencies in the radiative limit as well as in a practically achievable limit are presented. The model is based on the transfer matrix method coupled to a two-diode model, and is calibrated to experimental data of a GaAs photovoltaic device over laser irradiance and temperature. Since the laser wavelength does not strongly influence the open circuit voltage of the laser power converter, the optimal laser wavelength is determined to be in the range where the external quantum efficiency is maximal, but weighted by the photon flux of the laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy spectra of finite temperature superfluid helium-4 turbulence

A mesoscopic model of finite temperature superfluid helium-4 based on coupled Langevin-Navier-Stokes dynamics is proposed. Drawing upon scaling arguments and available numerical results, a numerical method for designing well resolved, mesoscopic calculations of finite temperature superfluid turbulence is developed. The application of model and numerical method to the problem of fully developed turbulence decay in helium II, indicates that the spectral structure of normal-fluid and superfluid turbulence is significantly more complex than that of turbulence in simple-fluids. Analysis based on a forced flow of helium-4 at 1.3 K, where viscous dissipation in the normal-fluid is compensated by the Lundgren force, indicate three scaling regimes in the normal-fluid, that include the inertial, low wavenumber, Kolmogorov k{sup −5/3} regime, a sub-turbulence, low Reynolds number, fluctuating k{sup −2.2} regime, and an intermediate, viscous k{sup −6} range that connects the two. The k{sup −2.2} regime is due to normal-fluid forcing by superfluid vortices at high wavenumbers. There are also three scaling regimes in the superfluid, that include a k{sup −3} range that corresponds to the growth of superfluid vortex instabilities due to mutual-friction action, and an adjacent, low wavenumber, k{sup −5/3} regime that emerges during the termination of this growth, as superfluid vortices agglomerate between intense normal-fluid vorticity regions, and weakly polarized bundles are formed. There is also evidence of a high wavenumber k{sup −1} range that corresponds to the probing of individual-vortex velocity fields. The Kelvin waves cascade (the main dynamical effect in zero temperature superfluids) appears to be damped at the intervortex space scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Phenomenological Thermal Spray Wall Interaction Modeling Framework Applied to a High Temperature Ignition Assistant Device

Airborne compression ignition engines must operate with reliable ignition systems to achieve proper ignition at every cycle, particularly at high altitudes. Glow-plug-based ignition-assistant (IA) devices can provide the necessary energy to preheat the fuel and ensure ignitability of the fuel-air mixture. Ignitability of liquid sprays can be facilitated via direct impingement onto the hot IA surface, however this comes with adverse effects on the IA durability. Therefore, optimizing an IA’s design requires detailed understanding of the physics of fuel spray impingement of superheated surfaces. While spray impingement on relatively low wall temperatures has been extensively studied and appropriate numerical models have been proposed through the years, fundamental understanding of high-speed liquid spray impingement on superheated walls is still elusive. This work aims to formulate a phenomenological thermal spray-wall interaction framework for modeling the film-boiling-induced heat transfer, atomization, and dispersion of fuel spray droplets impinging onto a superheated IA device. A qualitative comparison of the new phenomenological model is performed against optical experiments from the literature of an F-24 fuel spray injected onto an IA device located 12 mm away from the injector tip. The temperature of the IA was set at 1400 K. The fuel injection pressure was 400 bar, while the ambient gas pressure and temperature were 30 bar and 800 K, respectively. The performance of the phenomenological model is evaluated in comparison with two other state-of-art models from the literature. A qualitative analysis of the different spray and fuel-air mixture characteristics is performed to outline the differences in the predictions offered by the new phenomenological model and the two state-of-art spray-wall interaction models.

droplet dispersion↗

THRESHOLD PROBABILITY FUNCTIONS AND THERMAL INHOMOGENEITIES IN THE Ly{alpha} FOREST

We introduce to astrophysics the threshold probability functions S{sub 2}, C{sub 2}, and D{sub 2} first derived by Torquato et al., which effectively samples the flux probability distribution function (PDF) of the Ly{alpha} forest at different spatial scales. These statistics are tested on mock Ly{alpha} forest spectra based on various toy models for He II reionization, with homogeneous models with various temperature-density relations as well as models with temperature inhomogeneities. These mock samples have systematics and noise added to simulate the latest Sloan Digital Sky Survey Data Release 7 (SDSS DR7) data. We find that the flux PDF from SDSS DR7 can be used to constrain the temperature-density relation {gamma} (where T{proportional_to}(1 + {Delta}){sup {gamma}-1}) of the intergalactic medium (IGM) at z = 2.5 to a precision of {Delta}{gamma} = 0.2 at {approx}4{sigma} confidence. The flux PDF is degenerate to temperature inhomogeneities in the IGM arising from He II reionization, but we find S{sub 2} can detect these inhomogeneities at {approx}3{sigma}, with the assumption that the flux continuum of the Ly{alpha} forest can be determined to 9% accuracy, approximately the error from current fitting methods. If the flux continuum can be determined to 3% accuracy, then S{sub 2} is capable of constraining the characteristic scale of temperature inhomogeneities, with {approx}4{sigma} differentiation between toy models with hot bubble radii of 50 h{sup -1} Mpc and 25 h{sup -1} Mpc.

79 ASTRONOMY AND ASTROPHYSICS↗

On the sensitivity of a residual circulation model to differences in input temperature data

The residual mean circulation (RMC) formulation of zonally averaged transport in the middle atmosphere produces a circulation which depends on the distributions of net diabatic heating and temperature. Such circulations are from two temperature data sets, using the same radiative transfer code (Rosenfield et al. 1987). These circulations are then used to transport N2O in a photochemical model. The circulations and the resulting N2O distributions are notably different during the Northern Hemisphere winter, with that based on the NMC temperatures producing too much upward transport in the tropical stratosphere, as judged by comparison with the stratospheric and mesoscale sounder data. The experiment demonstrates that model calculations, in general, and perturbation assessments, in particular, are likely to be quite sensitive to the choice of input temperature data (where this is not computed self-consistently). It also reveals what appears to be a seasonally dependent bias in NMC zonally averaged temperatures with respect to those obtained from the LIMS instrument during 1978/1979.

Guthrie, Paul D.↗