Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Self-Consistent Theory for Structural Relaxation, Dynamic Bond Exchange Times, and the Glass Transition in Polymeric Vitrimers

Here, we formulate a statistical mechanical theory for how dynamic bond exchange influences the activated hopping-driven relaxation of Kuhn segments in dynamically cross-linked networks or vitrimers over a wide range of temperatures and cross-link densities. The key new methodological aspect is to address in a self-consistent manner the dynamic consequences of bond exchange on the Kuhn segmental alpha relaxation, and vice versa. The predicted temperature dependence of the segmental alpha time of vitrimers at high temperatures remains the same as that of permanent networks, but at lower temperatures, a significant acceleration of relaxation occurs due to bond exchanges. From a mechanistic perspective, the vitrimer local cage barrier is very weakly affected by bond exchange, while the collective elastic barrier contribution decreases significantly in the deeply supercooled regime. The vitrimer glass transition temperature is predicted to grow linearly with the square root of the cross-link density, as previously found for permanent networks. Material-specific chemical effects such as cross-linker size relative to that of the normal Kuhn segment or special attraction of a cross-linker with polymers are crudely considered based on model calculations. The theory is quantitatively applied to recent experiments on dry ethylene vitrimers. Good agreements are found including that the bond exchange time follows an Arrhenius law at high enough temperatures but upward non-Arrhenius deviations emerge in the deeply supercooled regime, and a collapsed master curve of the segment alpha time exists over a wide range of cross-link densities and temperatures. Possible extensions to treat dynamic heterogeneity effects and penetrant transport in vitrimers are briefly discussed.

chemical calculations↗
DOE OSTI2022

Planar thermal Hall effect of topological bosons in the Kitaev magnet α-RuCl 3

The honeycomb magnet α-RuCl 3 has attracted considerable interest because it is proximate to the Kitaev Hamiltonian whose excitations are Majoranas and vortices. The thermal Hall conductivity κ xy of Majorana fermions is predicted to be half-quantized. Half-quantization of κxy/T (T, temperature) was recently reported, but this observation has proven difficult to reproduce. Here, we report detailed measurements of κ xy on α-RuCl3 with the magnetic field B ∥ a (zigzag axis). In our experiment, κ xy /T is observed to be strongly temperature dependent between 0.5 and 10 K. We show that its temperature profile matches the distinct form expected for topological bosonic modes in a Chern-insulator-like model. Our analysis yields magnon band energies in agreement with spectroscopic experiments. At high B, the spin excitations evolve into magnon-like modes with a Chern number of ~1. In conclusion, the bosonic character is incompatible with half-quantization of κ xy /T.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kinetic analyses for solid-state phase transition of metastable amorphous-AlO x (2.5 < x ≤ 3.0) nanostructures into crystalline alumina polymorphs

Solid-solid phase change materials (SS-PCMs) hold promise for energy storage/dissipation in batteries and energetic materials. Yet, phase change kinetics for SS-PCMs undergoing metastable to semi-stable/stable phase transformations remain relatively ill-studied because trapping metastable phases remain challenging. Recently, we demonstrated the kinetic entrapment and stabilization of a highly disordered and amorphous Al-oxide phase m-AlO x @C (x~2.5-3.0) via laser ablation synthesis in solution (LASiS). We report here, to our knowledge, the first chemical kinetics analysis for S-S phase transition of the m-AlO 3 @C nanocomposites (< 5–8 nm sizes) into semi-stable equilibrium alumina phases (θ/γ-Al 2 O 3 ) via disproportionation reaction, while releasing excess trapped gases. Our results indicate the atomic density of the AlO 3 structures to be ~5–10 times less than that of the final Al 2 O 3 phases, which led to the hypothesis of a volume shrinkage process during their phase transition. Temperature-dependent X-ray diffraction studies reveal the high-temperature phase transition for m-AlO 3 → θ/γ-Al 2 O 3 to follow contracting volume kinetics model, thereby validating our earlier hypothesis. Using the geometric volume contraction model, reaction kinetics analyses from Arrhenius plots reveal the activation energy barrier for the phase transition to be ~270±11 kJ/mol. This makes the activation energy barrier nearly identical to the oxidation of micron-sized Al particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ubiquitous spin freezing in the superconducting state of UTe 2

In most superconductors electrons form Cooper pairs in a spin-singlet state mediated by either phonons or by long-range interactions such as spin fluctuations. The superconductor UTe 2 is a rare material wherein electrons are believed to form pairs in a unique spin-triplet state with potential topological properties. While spin-triplet pairing may be mediated by ferromagnetic or antiferromagnetic fluctuations, experimentally, the magnetic properties of UTe 2 are unclear. By way of muon spin rotation/relaxation (μSR) measurements on independently grown UTe 2 single crystals we demonstrate the existence of magnetic clusters that gradually freeze into a disordered spin frozen state at low temperatures. Our findings suggest that inhomogeneous freezing of magnetic clusters is linked to the ubiquitous residual linear term in the temperature dependence of the specific heat (C) and the low-temperature upturn in C/T versus T. The omnipresent magnetic inhomogeneity has potential implications for experiments aimed at establishing the intrinsic low-temperature properties of UTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

The role of iron in magnetic damping of Mg(Al,Fe) 2 O 4 spinel ferrite thin films

© 2020 Author(s). We have investigated magnesium aluminum ferrite thin films with a range of iron concentrations and identified the optimal iron content to obtain high crystalline quality thin films with the low magnetic damping required for spin current-based applications. Epitaxial MgAl 2-x FexO4 films with 0.8 < x < 2.0 were grown by pulsed laser deposition on single crystal MgAl2O4 substrates and were characterized structurally and magnetically. We find that the x = 1.5 composition minimizes the room-temperature magnetic damping with a typical Gilbert damping parameter of α eff = 1.8 × 10-3. This minimized damping is governed by a competition between the more robust magnetic ordering with increased iron content, x, and the more defective structure due to larger film-substrate lattice mismatch with increased iron content. The temperature-dependent magnetization curves indicate that Tc is suppressed below room temperature for iron content x ≤ 1.2 and eventually suppressed entirely for x = 0.8. X-ray magnetic circular dichroism results indicate that for all x the magnetic moment is dominated by Fe 3 + cations distributed in a 60:40 ratio on the octahedral and tetrahedral sites, with minimal contribution from Fe 2 + cations. Films with x = 1.4-1.6 exhibit very strong ferromagnetic resonance and low Gilbert damping with α eff = (1.8-6) × 10-3, making them ideal candidates for microwave and spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structure and good piezoelectric performance in the complex system of Pb[(Zn,Ni)Nb]O 3 –Pb[(In,Yb)Nb]O 3 –Pb(Zr,Hf,Ti)O 3

High-performance piezoelectrics are always demanded for the high-end application. In this study, a complex piezoelectric system of 0.49Pb(Zn 1/2 Ni 1/2 ) 1/3 Nb 2/3 O 3 – x Pb(In 1/2 Yb 1/2 ) 1/2 Nb 1/2 O 3 –(0.51 – x )Pb(Zr 1/2 Hf 1/2 ) 0.1 Ti 0.9 O 3 (0.16 ≤ x ≤ 0.23) was fabricated through the solid-state method. The structure, ferroelectric, piezoelectric, and dielectric properties were investigated. The optimum piezoelectric coefficient d 33 of 761 pC/N, high Curie temperature of 169 °C, dielectric permittivity ( ε r ) of 4557, and electromechanical coupling coefficient ( k p ) of 63% were found at the morphotropic phase boundary composition of x = 0.19, which are superior to other complex piezoelectric materials. In particular, a significant large-signal d 33 * of 913 pm/V and low strain hysteresis (6%) was obtained in the temperature range of 20–170 °C. Temperature-dependent x-ray diffraction (XRD) has demonstrated that good temperature stability is put down to the structure stability. The agreement between the calculated lattice strain from in situ high-energy synchrotron XRD data and the macroscopic measurements suggests that the large lattice strain has a dominant contribution to the high piezoelectric response. The high piezoelectric performance and good temperature stability makes it potential for application.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Static and shock compression studies of eutectic high-entropy alloy AlCoCrFeNi 2.1 to ultrahigh pressures

The high-entropy alloy with composition AlCoCrFeNi 2.1 , additively manufactured with the laser powder-bed fusion technique, has a far-from-equilibrium BCC/FCC eutectic nanolamellar structure. We studied the high-pressure response of this alloy under both static compression and high-strain rate shock compression. The response to static compression using a diamond anvil cell was studied at pressures up to 302 GPa with synchrotron x-ray diffraction at the advanced photon source. The high-pressure FCC-only phase of the EHEA previously observed by Pope et al. [AIP Adv. 13, 035124 (2023)] is found to be stable up to the highest pressure achieved in this study with a volume compression of V/V 0 = 0.587 at ambient temperature. The shock experiments were performed by using GEKKO XII lasers at the Institute of Laser Engineering, Osaka University. The principal Hugoniot equation-of-state of the EHEA was measured up to a pressure of 515 GPa and a compression of V/V 0 = 0.613. Additionally, the thermal equation of state of the EHEA was measured up to 6.2 GPa and 1623 K using a large-volume Paris–Edinburgh cell to obtain the temperature dependence of bulk modulus and thermal expansion coefficients. The melting temperature for EHEA AlCoCrFeNi 2.1 at a pressure of 5.6 GPa was measured to be 1648 ± 25 K. These results can be used to refine stochastic (or special) quasi-random structure (SQS) models for high-pressure high-temperature behavior of high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic and magnetic properties of hole-doped topological kagome Fe 1−𝑥 ⁢Mn 𝑥 ⁢Sn thin films

We have investigated the electronic and magnetic structures of topological kagome Fe 1−𝑥 ⁢Mn 𝑥 ⁢Sn (0 ≤ 𝑥 ≤ 0.3) thin films via neutron diffraction, electronic transport measurements, and ab initio density functional theory (DFT) to understand the interplay between hole doping, magnetism, and the electronic structures. Temperature-dependent neutron diffraction measurements on parent FeSn reveal the Néel temperature to be 𝑇 N ∼ 355 K and the underlying A-type antiferromagnetic ordering is associated with a wave vector 𝒒 = (001/2). Upon Mn doping to 𝑥 = 0.15, 𝑇 N decreases slightly while the magnetic ordering vector remains the same. Resistivity measurements show metallic characteristics and in-plane anisotropy down to 10 K for all the investigated samples. The effects of hole doping are mapped in terms of electronic ground state calculations via DFT which show that the Dirac point is moved closer to the Fermi level (𝐸 F ) and the flat bands get pushed away from 𝐸 F upon hole doping. However, a comparison between hole-doped Fe 1−𝑥⁢ Mn 𝑥⁢ Sn and electron-doped Fe 1−𝑥 ⁢Co 𝑥 ⁢Sn indicates that the Néel temperature does not scale with the position of 𝐸 F relative to the flat band. Furthermore, our results establish the antiferromagnetic state of FeSn and Fe 1−𝑥 ⁢Mn 𝑥⁢ Sn films at room temperature, laying the groundwork for future studies of magnetism in kagome heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation of Methane Generation Rates from Simulated and Radioactive Waste at Evaporator Conditions

Savannah River National Laboratory researchers have performed 9 experiments with simulated waste and 13 experiments with radioactive waste to determine methane generation rates (MGR) applicable to Savannah River Site waste at temperatures greater than or equal to 100 °C. Data from these experiments was used to generate temperature-dependent expressions to conservatively account for methane generation at elevated temperatures. Measured MGRs and the derived expressions are reported in units of standard cubic feet per hour per gallon of solution, where standard conditions are 25 °C and 1 atm.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1976

Photometric observations of unidentified bands in S stars

Scanner and eight-color observations are reported for unidentified bands occurring in the spectra of pure S stars. Correlations of an unidentified band measured at 7120 A with the band strengths of ZrO and LaO show a simple temperature dependence. A close correlation of molecular band strengths with color temperature suggests that the pure S stars are a fairly homogeneous group.

Piccirillo, J.↗
NASA NTRS1981

Annihilation radiation from a hot e/+/-e/-/ plasma

The radiation from electron-positron annihilations in a plasma of temperature above 10 to the 8th K is investigated as a possible source of the emission line at energies between 400 and 460 keV frequently seen in gamma-ray bursts. The annihilation rate and luminosity of an optically thin electron-positron plasma and the energy distribution of the resulting annihilation radiation are calculated by the use of a Monte Carlo technique as functions of temperature. Results indicate the annihilation spectrum to be peaked at an energy of 0.511 MeV plus a temperature-dependent blueshift, and the annihilation line to be significantly temperature-broadened. The widths of the observed burst emission lines set an upper limit of 3 x 10 to the 8th K on the temperature of any pair annihilation region in burst sources, which is considerably lower than the typical kinetic temperatures of the radiating particles. It is thus inferred that either the annihilation region is nonthermal, or spatially distinct from the burst site.

Ramaty, R.↗
NASA NTRS1983

Fiber optic temperature sensor

A temperature sensor has been developed that utilizes the temperature dependent absorption of a rare earth doped optical fiber. The temperature measurement is localized at a remote position by splicing a short section of the rare earth fiber into a loop of commercial data communication fiber that sends and returns an optical probe signal to the temperature sensitive section of fiber. The optical probe signal is generated from two different wavelength filtered LED sources. A four port fiber optic coupler combines the two separate wavelength signals into the fiber sensing loop. Time multiplexing is used so that each signal wavelength is present at a different time. A reference signal level measurement is also made from the LED sources and a ratio taken with the sensor signal to produce a transmission measurement of the fiber loop. The transmission is affected differently at each wavelength by the rare earth temperature sensitive fiber. The temperature is determined from a ratio of the two transmission measurements. This method eliminates any ambiguity with respect to changes in signal level in the fiber loop such as mating and unmating optical connectors. The temperature range of the sensor is limited to about 800 C by the temperature limit fo the feed fibers.

Morey, W. W.↗
NASA NTRS1985

Preliminary study: Moisture-polymer interaction. Stuby objectives

The problems associated with mathematically modeling water-module interaction phenomena, including sorption and desorption, diffusion, and permeation are discussed. With reliable analytical models, an extensive materials data base, and solar radiation surface meteorological observations (SOLMET) weather data, predicting module lifetimes in realistic environments can become a practical reality. The status of the present techniques of simulating the various transport mechanisms was reported. The Dent model (a modified Brunauer-Emmet-Teller) approach represented polyvinyl butyral (PVB) sorption data. A 100-layer material model and Fick's diffusion model gave diffusivity values exhibiting adequate agreement with those measured for PVB. Diffusivity of PVB is concentration dependent, decreasing as the water content in PVB increases. The temperature dependence of diffusion in PVB is well modeled by the Arrhenius rate equation. Equilibrium conductivity and leakage current data are well represented by Hearle's model for bulk ionic conductivity. A nodal network analysis using the Systems Improved Numerical Differencing Analyzer (SINDA) Thermal Analyzer gave reasonable correlation with measurable data. It is concluded that realistic lifetime predictions seem to be feasible.

Wen, L. C.↗
NASA NTRS1987

Theory of transition-layer emission measures and coronae

The basic equations describing the energy equilibria, the conductive heat flux, and the temperature stratifications for stellar transition layers and coronae with 'open' field lines are summarized. The temperature dependence of the emission measures for lines originating in different temperature regions of the transition zone is determined. It is found that the stellar transition regions consist of two basically different parts: the lower part where mechnical energy input is balanced by the radiative losses, and the upper part where the mechanical energy input is balanced by the divergence of the conductive flux and radiative losses. In the lower part, the temperature stratification is determined by an equilibrium between mechanical flux input and radiative energy losses. The coronal temperatures increase with increasing mechanical flux and damping length in the upper transition zone.

Bohm-Vitense, Erika↗
NASA NTRS2012

Performance of Magnetic Penetration Thermometers for X-Ray Astronomy

The ideal X-ray camera for astrophysics would have more than a million pixels and provide an energy resolution of better than leV FWHM for energies up to 10 keY. We have microfabricated and characterized thin-film magnetic penetration thermometers (MPTs) that show great promise towards meeting these capabilities. MPTs operate in similar fashion to metallic magnetic calorimeters (MMCs), except that a superconducting sensor takes the place of a paramagnetic sensor and it is the temperature dependence of the superconductor's diamagnetic response that provides the temperature sensitivity. We present a description of the design and performance of our prototype thin-film MPTs with MoAu bilayer sensors, which have demonstrated an energy resolution of approx 2 eV FWHM at 1.5 keY and 4.3 eV FWHM at 5.9 keY.

Nagler, P. C.↗
NASA NTRS2024

Exploring Standing and Reflected Slow-mode Waves in Flaring Coronal Loops: A Parametric Study Using 2.5D MHD Modeling

Abstract Recent observations of reflected propagating and standing slow-mode waves in hot flaring coronal loops have spurred our investigation into their underlying excitation and damping mechanisms. To understand these processes, we conduct 2.5D magnetohydrodynamic (MHD) simulations using an arcade active region model that includes a hot and dense loop. Our simulations allow for in-depth parametric investigations complementing and expanding our previous 3D MHD modeling results. We excite these waves using a large-amplitude, flow pulse applied at one footpoint of the loop in two distinct models as motivated by observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA). The first model (Model 1) incorporates classical compressive viscosity coefficient, while the second model (Model 2) adopts a 10-times enhanced viscosity coefficient. We obtain the following major results: (1) Our 2.5D MHD simulations reinforce previous conclusions derived from 1D and 3D MHD models that significantly enhanced viscosity is crucial for the rapid excitation of standing slow waves with damping times consistent with observations by Wang et al. (2015). (2)We uncover that nonlinearity in Model 1 delays the conversion of a reflected propagating wave into a standing wave. In contrast, Model 2 exhibits a much weak influence of nonlinearity on the excitation time of standing waves, thanks to the suppression of these effects by enhanced viscosity. (3) Our results reveal that the transverse temperature structure holds more influence on wave behavior than the density structure. In Model 1, increased loop temperature contrast significantly enhances wave trapping within the structure, mitigating the impact of temperature-dependent viscous damping. Conversely, in Model 2, the impact of temperature structure on wave behavior weakens in comparison to the effect of viscosity. (4) Model 1 displays evident nonlinear coupling to the fast and kink magnetoacoustic waves and pronounced wave leakage into the corona. Model 2 exhibits significantly weaker effects in this regard. Analyzing three observed wave events by SDO/AIA aligns with Model 2 predictions, providing further support for the substantial viscosity increase. Our 2.5D study unravels the complex interplay of wave-flow phenomena and nonlinear processes in coronal loops, extending our previous 1D modeling results to incorporate more realistic loop geometry. This provides insights into scenarios where 3D effects may be neglected, thereby enhancing our understanding of the intricate dynamics of the solar corona.

Tongjiang Wang↗
NASA NTRS1991

Collisional effects in laser detection of tropospheric OH

The use of laser-induced fluorescence to measure OH in the troposphere is discussed. It is noted that quantitative laser detection of OH requires knowledge of collisional processes affecting the measurements and interference effects due to OH generated by laser photolytic processes. Collisions induce quenching of the excited A-state, as well as vibrational and rotational energy transfer in the excited and ground states. It is noted that the state-specific nature of these processes is important, especially the rotational level dependence of quenching and vibrational transfer in excited OH. Also important is the temperature dependence according to which quenching cross sections sharply increase with decreasing temperature. Laboratory experiments studying these collisional processes are described, and their implications for laser detection of tropospheric OH are examined.

Crosley, David R.↗
NASA NTRS1990

Silicon chemistry in interstellar clouds

A new model of interstellar silicon chemistry is presented that explains the lack of SiO detections in cold clouds and contains an exponential temperature dependence for the SiO abundance. A key aspect of the model is the sensitivity of SiO production by neutral silicon reactions to density and temperature, which arises from the dependence of the rate coefficients on the population of the excited fine-structure levels of the silicon atom. As part of the explanation of the lack of SiO detections at low temperatures and densities, the model also emphasizes the small efficiencies of the production routes and the correspondingly long times needed to reach equilibrium. Measurements of the abundance of SiO, in conjunction with theory, can provide information on the physical properties of interstellar clouds such as the abundance of oxygen bearing molecules and the depletion of interstellar silicon.

Langer, William D.↗